"FTP Subcommand: local error' in DMS

Hi Forum..
I have a problem with DMS while i'm doing Check in As 'Vault'
i'm getting an error "FTP Subcommand: local error'
wat r the settings tht i hav to do to overcum this error.
i have already checked with reports like
RSFTP002 & MCDOKVAULT.
itz wrking fine wit those reports but in DMS its throughing da above error.
Regards,
Vijay.
P.S: Useful info will be awarded with Points

Hi Vijay,
Is your system a Unicode system?
If so the problem can be resolved if you have a unicode version of
SAPFTP program in your desktop according to note 93042.
Please follwo the note 93042 and download the latest sapftp.
Execute sapftp -V on your command prompt. This should show you the ftp
version stating if it is unicode.
Best regards,
Christoph
P.S.: Please reward points for useful information.

Similar Messages

FTP_R3_TO_SERVER gives error " FTP SubCommand Local Error"

Hi
I have an issue with the transfer of data from SAP internal table to FTP server
I am using the function module FTP_R3_TO_SERVER.
Using this function module I am able to transfer data only some times.
Most of the time it gives the error message "FTP SubCommand Local Error" .
Could someone help me resolve this error.
Its quite urgent.
Help to resolve this is much appreciated.
Regards

Hi Sharayu,
Kindly give your mail id I will send the code to your mail id.
Regards
Sudheendra

Error in DMS???

Hii
While uploading the drawing i m getting the error lik "FTP subcommand: Local error'
Any body have any idea , why its this werror occuring ,??
How to rectify this error ???
Thanks
SAP-MM

Hi
I think you did not define data carrier for DMS yet. You need to check in your drawing document type whether you have checked K-pro.(spro>cross applications> DMS-->control data --->define document type.)
Then you need to do full configuration of data carrier or setting for storage system.
(spro>cross applications> DMS-->General data)
You need to take help from basis consultant.
Regards
Antony

Job Cancelled_FTP subcommand: Local error_ECC6_Oracle10_Solaris10

Hi,
We are facing problem with background job.
Requirement: Program collects various details related to Sales (from various tables) creates one test file and same will be placed in some other Non-SAP application through FTP.
Observation:
While in foreground it is working fine and file geting placed in non-SAP application but in background it is throughing error with job status cancelled as "FTP subcommand: Local error"
Job log :
Job started
Step 001 started (program <program>, variant <variant>, user ID <user id>)
FTP subcommand: Local error
Job cancelled after system exception ERROR_MESSAGE
Any one encounter this problem???
Thanks in advance. . .
S@PM@N

Hi Ashok,
Thanks for response. . . there is a minor correction for my post ..
In fact it is not working foreground as well. In foreground also we are getting "FTP subcommand: Local error" but manuall ftp is working fine.
We have total 25 Z-programs, otehr programs working fine both in foreground and background.
We are not getting any short dumps or system logs entries.
we r using these function modules to send data to FTP from a program
HTTP_SCRAMBLE
FTP_CONNECT
FTP_R3_TO_SERVER
FTP_DISCONNECT
Regards
S@PM@N

FTP Sub Command: Local Error with EasyDMS

We have been using DMS for several years. We have a vault setup and are able the checkin files with FTP via SAPGUI with no problems. Recently we have been looking at EasyDMS. We have it installed and can login ok. When we try to drag a file into the windows explorer the popup appears and we can enter the META data. When the file is checkin via FTP we get FTP Sub Command: Local Error.
Any suggestions would be appreciated.

Tom,
We have encountered the exact same siituation with EasyDMS, we currently have had an OSS call to SAP for 2 weeks that ended up with the developers in Germany and bouncing the issue back to technical support and stating that they have no idea!
We are also interested in an answer, sorry I can't help you, but you are not alone.

My SAP SRM Application Monitors Purchase order / local errors

I am seeing local errors in the monitor under Purchase order. The message is incorrect status in pricing, but when i click on the message i get no further information. How can I track there errors

Hi,
Check your outbound queue in SMQ2 if the error is there for more details. pricing error is related with the IPC so check if your IPC destinations are working in SM59.
Please have also a look into following threads :
Incorrect status in pricing - SRM server 5.5
External Requirements to SRM
Hope this helps
Laurent.

Application monitor PO local errors "Buffer table not up to date"

Hi Experts,
Any idea about the cause of below error, no PO's effected, but in RZ20 i could see below message
General details
Column                 Contents
Node name (MTE)        ESP\Business to Business Procurement(100)\...\Purchase Order\Local errors
System                 ESP
Context                Business to Business Procurement(100)
Object name            Purchase Order
Short name             Local errors
Type                   Status attribute
Class                  BBP_PO_LOCAL
Highest alert          Red
Number of alerts       1
Definition status      ENABLED
Customizing status     DBSET
Auto-reaction method   -
Definition status      -
Runtime status         -
Data collection method -
Definition status      -
Runtime status         -
Analysis method        BBP_ANALYZE_PO_LOCAL
Definition status      AL_TD_DEF_CHECKED
Status attribute details
Column                Contents
Node name (MTE)       ESP\Business to Business Procurement(100)\...\Purchase Order\Local errors
System                ESP
Context               Business to Business Procurement(100)
Object name           Purchase Order
Short name            Local errors
Date                  15.09.2009
Time                  15:12:04
Last reported message Buffer table not up to date
Not able to find for which document this error has arised and why
Thx
Jai

Below is the SM21 Log
Details Page 2 Line 20 System Log: Local Analysis of lbesrmp                  1
Time     Type Nr Clt User   TCode Grp N Text
15:12:04 DIA 001 100 SARFOW       AB 0 Run-time error "UNCAUGHT_EXCEPTION" occurred
Run-time error "UNCAUGHT_EXCEPTION" occurred
Details
Recording at local and central time........................ 15.09.2009 15:12:04
Task...... Process                     User...... Terminal Session TCode Program Cl Problem cl          Packag
07716      Dialog work process No. 001 SARFOW     10.0.1.7       1               T Transaction Problem SABP
Further details for this message type
Module nam Line Error text
abexcp     2099 raiseExcp
Documentation for system log message AB 0 :
The specified runtime error has occurred in the system.
Parameter
abcdefghijklmnopqrstuvwxyz .. UNCAUGHT_EXCEPTION
Technical details
File Offset RecFm System log type     Grp N variable message data
290 80280 l     Error (Module, Row) AB 0 raiseExcp                                           abexcp 2099

BATCH-FTP-EWAY-OPERATION-ERROR

Hi all,
I get an error running my JCAPS application using an BatchFTP adapter. With the message subject BATCH-FTP-EWAY-OPERATION-ERROR.
The message is the following:
Message: Batch FTP eWay error when doing data transfer operation in [put()], message=[com.stc.eways.batchext.FtpFileException: BATCH-MSG-M0130: FtpFileClientImpl.doTransferPut(): put got exception [com.stc.eways.batchext.FtpFileException: BATCH-MSG-M0129: FtpFileClientImpl.doTransferPut(): Failed to storeFile. Reply from ftp server is [250 CWD command successful.].].].
The error message is:
<?xml version="1.0" encoding="UTF-8"?>
<Alert xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation=".\Alert.xsd">
<Id>0</Id>
<Type>Alert</Type>
<SeverityCode>2</SeverityCode>
<Severity>MAJOR</Severity>
<MessageCode>BATCH-FTP-EWAY-OPERATION-ERROR</MessageCode>
<Message>BATCH-FTP-EWAY-OPERATION-ERROR</Message>
<MessageDetails><![CDATA[Batch FTP eWay error when doing data transfer operation in [put()], message=[com.stc.eways.batchext.FtpFileException: BATCH-MSG-M0130: FtpFileClientImpl.doTransferPut(): put got exception [com.stc.eways.batchext.FtpFileException: BATCH-MSG-M0129: FtpFileClientImpl.doTransferPut(): Failed to storeFile. Reply from ftp server is [250 CWD command successful.].].].]]></MessageDetails>
<OperationalStateCode>7</OperationalStateCode>
<OperationalState></OperationalState>
<ObservationalStateCode>0</ObservationalStateCode>
<ObservationalState>UNOBSERVED</ObservationalState>
<ListenersNotified>0</ListenersNotified>
<PhysicalHostName>jcapsdr:19048</PhysicalHostName>
<EnvironmentName>BH_PROD</EnvironmentName>
<LogicalHostName>AD</LogicalHostName>
<ServerType>INTEGRATION</ServerType>
<ServerName>server</ServerName>
<ComponentType>EWAY</ComponentType>
<ComponentProjectPathName>prjBHToSATO</ComponentProjectPathName>
<ComponentName>BatchFTP2</ComponentName>
<TimeStamp>Tue Sep 06 11:16:23 EST 2011</TimeStamp>
</Alert>
What can be the problem?
Thanks for your help.
Cheers,
Andrew

If the File size is larger, then we encounter this exception.
Remedy: Restart of the service may solve
or split the file size and place them.

Localized Errors (xerces, xml-schema)

i would like to get localized error messages (ex. in german) after parsing a xml-schema with the SchemaFactory.
i've tried out the typical way with "Locale.SetDefault" and e.getLocaleMessage" in a selfwritten ErrorHandler but this doesn't work ...

i would like to get localized error messages (ex. in
german) after parsing a xml-schema with the
SchemaFactory.
i've tried out the typical way with
"Locale.SetDefault" and e.getLocaleMessage" in a
selfwritten ErrorHandler but this doesn't work ...I have the same problem as above. Is there a way to customise schema validation messages?
example
cvc-attribute.4: The value ''{2}'' of attribute ''{1}'' on element ''{0}'' is not valid with respect to its fixed '{'value constraint'}'. The attribute must have a value of ''{3}''.
to become
Element "{0}" value is invalid. Choose from "{3}".
thanks

Error -61 with FTP Write permissions error; Not a publisher

Hi,
I am trying to use Safari to FTP with my schools server (FreeBSD) but when I try to delete something I get error -61 which is FTP Write permissions error; Not a publisher. When I select "Get Info" I see the permissions say "You can only read". How can I fix this?

Hi Rob
so far as I know, Safari and/or Finder can only read from ftp sites - hence the response you are seeing.
I've used http://cyberduck.ch/ for a few years - there are many other free/sharewware ftp clients

Soundconverter gives locale error (x86-64)(Solved)

What corrective action to supply a supported locale?
Edit: Needed to generate locales in locale-gen as root.
Last edited by lilsirecho (2009-01-06 16:51:58)

Added infor...operating in cmd line as root.
ash-3.2# soundconverter -t /home/k3bCdCopy3 /home/.mp3
SoundConverter 1.4.1
(process:3243): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
using Gstreamer version: 0.10.21, Python binding version: 0.10.13
Traceback (most recent call last):
File "/usr/bin/soundconverter", line 86, in <module>
locale.setlocale(locale.LC_ALL,"")
File "/usr/lib/python2.6/locale.py", line 494, in setlocale
return _setlocale(category, locale)
locale.Error: unsupported locale setting

FAILED: 3X HOST (mymachine.local) error: NewMoviewFromFile failed -2048

I'm getting this error for either/or machine in my cluster when I try to render a Motion project file to a DV NTSC quicktime via a Compressor batch:
FAILED: 3X HOST (mymachine.local) error: NewMovieFromFile failed -2048
Any thoughts as to what that error code really means?
(Cluster controller - G5 2x2.5; PB17 G4 1.25 Services only)

I've seen this error when our Xsan was configured for high data transfers. Turns out there the san was corrupting the segments, and the nodes couldn't read the segments and assemble the files. Only the node that wrote the segment could read it. After talking with Shake support, turned out setting the san to default settings fixed it.

'Unknown error (0x8000500c)' and 'A local error has occurred' exceptions

Hi
I have a below code which causes the two exceptions.
Unknown Error
A local error has occurred
Can anyone tell me what is reason for this exceptions and solution for that as well.

Hi Archana,
You need to pass the FQDN to DirectoryEntry API. Please check the below links:
http://stackoverflow.com/questions/9737599/activedirectory-error-0x8000500c-when-traversing-properties
If that doesn't help, then try using the cache refresh steps mentioned in the below link before running your app:
http://support2.microsoft.com/default.aspx?ID=KB;EN-US;Q241981
Hope that helps.
(Please mark as answer if it resolves your query. Please upvote if this post is helpful.)
Rajesh.

Locale errors

I am getting locale errors like when i use any shell.
-bash: warning: setlocale: LC_CTYPE: cannot change locale (en_IN.UTF-8): No such file or directory
-bash: warning: setlocale: LC_NUMERIC: cannot change locale (en_IN.UTF-8): No such file or directory
-bash: warning: setlocale: LC_TIME: cannot change locale (en_IN.UTF-8): No such file or directory
-bash: warning: setlocale: LC_COLLATE: cannot change locale (en_IN.UTF-8): No such file or directory
-bash: warning: setlocale: LC_MESSAGES: cannot change locale (en_IN.UTF-8): No such file or directory
How do i remove them?
Any help would be appreciated.

Plz try and read this:
https://wiki.archlinux.org/index.php/Installation_Guide

Error; publication terminated = FTP subcommand: Server reports error

Hi
i am getting the above error.
I followed the best practice documents. I dont have any clue as to how to go about the same..
used catalog and catalog1 for FTP and HTTP directory
the publishing target is IMS_DOCS_A5C
hostname "serv10000"
also in the create webcatalog component i have created "webcatalog"
imgserver " http://serv10000.domainname.com:50000/"
used the default http and ftp ports
you help in this regard is highly appreciated
regards
Subhasis

Did you try actually accessing that ftp target through any simple ftp program? See if you can do mkdir or put with that anonymous user in to that target.
If you can do FTP independently, then see the SAP log - transaction code SM21 - for any issues, during publication after you get the FTP error. Hopefully, you should find the FTP error there.
Happy Holidays.
Easwar Ram
http://www.parxlns.com

"FTP Subcommand: local error' in DMS

Similar Messages

Maybe you are looking for