FTP to database not working Oracle 9.2

Going through the steps of setting up the basic XDB demo. I have setup the listener correctly with the FTP and HTTP presentation and ports.
When I use FTP in DOS to try and connect to XDB it immediately opens and then closes communication port. There is nothing in the Oracle alert log or trace file to point to any issues. Any suggestions?

Sounds like some listener configuration problem. Check for the DISPATCHERS line in init.ora. Play around with lsnrctl to see what's going on.

Similar Messages

Database not working

Hello,
I am having a 10g release 1 database on my HP UX server.
The problem with this database is it's listener is working emagent is working fine.
But I am trying to login with system password then it shows me error like
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
HP-UX Error: 2: No such file or directory

Moderator Comment:
The O.P. had already asked this question in the Solaris 10 forum.
Database not working
I had already moved it to the Database forum.
Then after the comments in this thread, they've re-posted it yet again into the Database forum.
Not able to connect / as sysdba
and spammed it to the Oracle Linux forum:
Not able to connect / as sysdba
Handle: user8856758
Status Level: Newbie
Registered: Jun 22, 2011
Total Posts: 6
Total Questions: 4 (3 unresolved)@ user8856758 ,
You've been here long enough to know better, so we can only assume you are just being inconsiderate or rude with all your crossposts.
They're all locked.

SAP FTP Binary Does not work after EHP 7 Upgrade

Hi All,
Since EHP 7, if I try to execute an external command through sm49, which has a shell script for ftp connection and fetching files, the 'binary' command after ftp connection is not working.
Result? I'm fetching corrupted files once in a while. The same was fine before the upgrade. The script runs fine at OS level. We are using AIX.
Did anyone see this issue before? Is there a solution?
Please help, it's quite urgent.
Thank you.
Uday

Hi Uday,
Since EHP 7, if I try to execute an external command through sm49, which has a shell script for ftp connection and fetching files, the 'binary' command after ftp connection is not working.
1) What is the exact error message you get ?
2) Did you check permission to the script . Ensure sidadm has full access to execute it.
3) Did you check Test Connection to TCP/IP RFC destinations SAPFTP and SAPFTPA are working fine in SM59 ?
Regards,
Deepak Kori

5.0 database not working in lookout 6.6

5.0 database not working in lookout 6.0. I converted the database using the lks file and then saved it. that all worked fine but my modbus stats are in 100% error connected with direct serial! any known fixes? help please!

Is this MODBUS or the database?
To use the 5.0 Databaes you need to use the NI MAX utility to convert a citadel 4 to Citadel 5 database.
Forshock - Consult.Develop.Solve.

FTP bursting is not working for a particular server

Hi All,
I am using BIP 10.1.3.4
I have a strange problem
In my company there are 2 environment
development and production
I have configured a FTP location in both the environment.But the report ftp bursting is working but in Production it is not working.
Is there any other way of checking settings.
Please suggest.
Thanks

Hi All,
I enabled the logging in BI publisher and found the following error in log file.
Can you please suggest
[120711_182041240][oracle.apps.xdo.common.font.FontFactory][STATEMENT] type1.Courier closed.
[120711_182042353][oracle.apps.xdo.template.rtf.FOTemplate][STATEMENT] xsl1.0-compatibility is set to false in configuration ,xdk11g wrapper is off
[120711_182043190][][STATEMENT] Logger.init(): *** DEBUG MODE IS ON. ***
[120711_182043190][][STATEMENT] Logger.init(): LogDir=/applic/oracle/product/10.1.3/OracleAS_BIP_1/xmldebug
[120711_182043190][oracle.apps.xdo.template.FOProcessor][STATEMENT] FOProcessor constructor is called.
[120711_182044031][oracle.apps.xdo.template.FOProcessor][STATEMENT] FOProcessor has been initialized without default config.
[120711_182044032][oracle.apps.xdo.template.FOProcessor][STATEMENT] FOProcessor.setLocale is called with 'en-AU'.
[120711_182044032][oracle.apps.xdo.template.FOProcessor][STATEMENT] FOProcessor.setTemplate(String) is called with '/applic/oracle/product/10.1.3/OracleAS_BI
P_1/j2ee/home/applications/xmlpserver/xmlpserver/xdo/tmp//120711_182028372/xdo2.tmp'.
[120711_182044034][oracle.apps.xdo.template.FOProcessor][STATEMENT] FOProcessor.setData(String) is called with '/applic/oracle/product/10.1.3/OracleAS_BIP_1/
j2ee/home/applications/xmlpserver/xmlpserver/xdo/tmp//120711_182028372/xdo0.tmp'.
[120711_182044056][oracle.apps.xdo.template.FOProcessor][STATEMENT] FOProcessor.setOutput(String)is called with '/applic/oracle/product/10.1.3/OracleAS_BIP_1
/j2ee/home/applications/xmlpserver/xmlpserver/xdo/tmp//120711_182028372/xmlp17031tmp_85900001_1.xls'.
[120711_182044057][oracle.apps.xdo.template.FOProcessor][STATEMENT] FOProcessor.setOutputFormat(byte)is called with ID=4.
[120711_182046652][oracle.apps.xdo.template.FOProcessor][STATEMENT] Start Memory: max=989MB, total=495MB, free=448MB
[120711_182046652][oracle.apps.xdo.template.FOProcessor][STATEMENT] FOProcessor.generate() called.
[120711_182046653][oracle.apps.xdo.template.FOProcessor][STATEMENT] Log file 'xdo_120711_182046653_fo_out_ab1f6.out' is created.
[120711_182046654][oracle.apps.xdo.template.FOProcessor][STATEMENT] Log file 'xdo_120711_182046653_fo_data_1_.xml' is created.
[120711_182046998][oracle.apps.xdo.template.FOProcessor][STATEMENT] Log file 'xdo_120711_182046653_fo_data_1_.xsl' is created.
[120711_182047052][oracle.apps.xdo.template.FOProcessor][STATEMENT] createFO(Object, Object) is called.
[120711_182047156][][STATEMENT] WARNING: Found undetermined AttrKey: style-name
[120711_182052743][oracle.apps.xdo.common.xml.XSLT10gR1][STATEMENT] Oracle XML Developers Kit 10.1.0.5.0 - Production
[120711_182052746][oracle.apps.xdo.common.xml.XSLT10gR1][STATEMENT] Scalable Feature Disabled
[120711_182058312][][ERROR] Invalid XSD string: 23-Jul-2011
[120711_182058313][][ERROR] Invalid XSD string: 30-Nov-2031
[120711_182058315][][ERROR] Invalid XSD string: 23-Jul-2011
[120711_182058316][][ERROR] Invalid XSD string: 30-Nov-2031
[120711_182058318][][ERROR] Invalid XSD string: 23-Jul-2011
[120711_182058319][][ERROR] Invalid XSD string: 30-Nov-2031
[120711_182058321][][ERROR] Invalid XSD string: 23-Jul-2011
[120711_182058321][][ERROR] Invalid XSD string: 30-Nov-2031
[120711_182058323][][ERROR] Invalid XSD string: 23-Jul-2011
[120711_182058323][][ERROR] Invalid XSD string: 30-Nov-2031
[120711_182058325][][ERROR] Invalid XSD string: 23-Jul-2011
[120711_182221400][][ERROR] Invalid XSD string: 25-Sep-2011
[120711_182221401][][ERROR] Invalid XSD string: 27-Nov-2011
[120711_182221401][][ERROR] Invalid XSD string: 28-Aug-2011
[120711_182221402][][ERROR] Invalid XSD string: 31-Jul-2011
[120711_182221490][oracle.apps.xdo.template.FOProcessor][STATEMENT] Log file 'xdo_120711_182216594_fo_fo_1_.fo' is created.
[120711_182221514][][PROCEDURE] XSL-T time used: 4730 msecs
[120711_182221514][oracle.apps.xdo.template.FOProcessor][STATEMENT] Calling FOProcessingEngine.process()
[120711_182221514][][STATEMENT] Using optimized xslt
[120711_182221518][][STATEMENT] Temporary file created: /var/tmp/xdo8wXFrbYzan17047.tmp
[120711_182221518][][STATEMENT] [ HTML GENERATOR ]---------------------------------------------
[120711_182221518][][STATEMENT] XDO version = Oracle BI Publisher 10.1.3.4.1
[120711_182221518][][STATEMENT] java.home = /applic/oracle/product/10.1.3/OracleAS_BIP_1/jdk/jre
[120711_182221519][][STATEMENT] XDO_TOP = null
[120711_182221519][][STATEMENT] Config Path = null
[120711_182221519][][STATEMENT] Debug Cfg Path= /applic/oracle/product/10.1.3/OracleAS_BIP_1/jdk/jre/lib/xdodebug.cfg
[120711_182221519][][STATEMENT] Font dir = /applic/oracle/product/10.1.3/OracleAS_BIP_1/jdk/jre/lib/fonts/
[120711_182221519][][STATEMENT] Locale = en-AU
[120711_182221520][][STATEMENT] [ HTML GENERATOR PROPERTIES ]----------------------------------
[120711_182221520][][STATEMENT] fo-image-handling-ver=5.5
[120711_182221520][][STATEMENT] html-css-base-uri=
[120711_182221521][][STATEMENT] html-css-dir=null(not set)
[120711_182221521][][STATEMENT] html-css-embedding=embed-to-header
[120711_182221521][][STATEMENT] html-image-base-uri=
[120711_182221521][][STATEMENT] html-image-dir=/applic/oracle/product/10.1.3/OracleAS_BIP_1/j2ee/home/applications/xmlpserver/xmlpserver/xdo/tmp/120711_18202
8372
[120711_182221521][][STATEMENT] html-output-body-only=false
[120711_182221522][][STATEMENT] html-output-charset=UTF-8
[120711_182221522][][STATEMENT] html-output-width-in-percentage=false
[120711_182221522][][STATEMENT] html-outputtype=pseudo-excel
[120711_182221522][][STATEMENT] html-replace-smartquotes=true
[120711_182221522][][STATEMENT] html-show-footer=true
[120711_182221523][][STATEMENT] html-show-header=true
[120711_182221523][][STATEMENT] html-suppressed-line-height=false
[120711_182221523][][STATEMENT] make-accessible=false
[120711_182221523][][STATEMENT] system-temp-dir=/var/tmp/
[120711_182221523][][STATEMENT] ------------------------------------------------------
[120711_182222050][][STATEMENT] Rendering page [1]
[120711_182222117][oracle.apps.xdo.common.font.FontFactory$FontDef][STATEMENT] Type1 font created: Helvetica
[120711_182226564][][STATEMENT] Phase2 time used: 4514ms
[120711_182227573][][STATEMENT] Continue rendering page [1]
[120711_182231893][][PROCEDURE] FO+Gen time used: 10378 msecs
[120711_182231893][oracle.apps.xdo.template.FOProcessor][STATEMENT] clearInputs(Object) is called.
[120711_182231894][oracle.apps.xdo.template.FOProcessor][STATEMENT] clearInputs(Object) done. All inputs are cleared.
[120711_182231894][oracle.apps.xdo.template.FOProcessor][STATEMENT] End Memory: max=989MB, total=495MB, free=36MB
[120711_182231927][oracle.apps.xdo.delivery.DeliveryManager][STATEMENT] initConfig(): loading default properties :{}
[120711_182231928][oracle.apps.xdo.delivery.DeliveryManager][STATEMENT] createRequest(): called with request type :ftp
[120711_182231928][oracle.apps.xdo.delivery.DeliveryManager][STATEMENT] createRequest(): exiting
[120711_182231930][oracle.apps.xdo.batch.DeliveryHelper][EXCEPTION] java.lang.NullPointerException
at oracle.apps.xdo.batch.DeliveryHelper.getFtpDeliveryRequest(Unknown Source)
at oracle.apps.xdo.batch.DeliveryHelper.addRequest(Unknown Source)
at oracle.apps.xdo.batch.bursting.DocumentDelivery.addDeliveryRequest(Unknown Source)
at oracle.apps.xdo.batch.bursting.DocumentDelivery.submitEnterpriseDeliveryRequest(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.addDocument2Queue(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.createBurstingDocument(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.endDocument(Unknown Source)
at oracle.xml.parser.v2.XMLContentHandler.endDocument(XMLContentHandler.java:119)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:311)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:263)
at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingRequest(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.process(Unknown Source)
at oracle.apps.xdo.servlet.scheduler.XDOJob.runBurstingReport(XDOJob.java:2055)
at oracle.apps.xdo.servlet.scheduler.XDOJob.execute(XDOJob.java:371)
at org.quartz.core.JobRunShell.run(JobRunShell.java:195)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
[120711_182231930][oracle.apps.xdo.delivery.ftp.FTPDeliveryRequest][STATEMENT] submit(): Called
[120711_182231931][oracle.apps.xdo.batch.DeliveryHelper][EXCEPTION] oracle.apps.xdo.delivery.DeliveryException: Document file or input stream is not set.
at oracle.apps.xdo.delivery.AbstractDeliveryRequest.submit(Unknown Source)
at oracle.apps.xdo.batch.DeliveryHelper.submitRequests(Unknown Source)
at oracle.apps.xdo.batch.bursting.DocumentDelivery.submitEnterpriseDeliveryRequest(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.addDocument2Queue(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.createBurstingDocument(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.endDocument(Unknown Source)
at oracle.xml.parser.v2.XMLContentHandler.endDocument(XMLContentHandler.java:119)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:311)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:263)
at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingRequest(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.process(Unknown Source)
at oracle.apps.xdo.servlet.scheduler.XDOJob.runBurstingReport(XDOJob.java:2055)
at oracle.apps.xdo.servlet.scheduler.XDOJob.execute(XDOJob.java:371)
at org.quartz.core.JobRunShell.run(JobRunShell.java:195)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
[120711_182231933][][STATEMENT] Default write connection pool max:20, min:10, total:10, available:8
[120711_182232025][][STATEMENT] ToplinkDataHandler.terminateSession() : releasing the session.
[120711_182232027][][STATEMENT] /applic/oracle/product/10.1.3/OracleAS_BIP_1/j2ee/home/applications/xmlpserver/xmlpserver/xdo/tmp//120711_182028372 deleted s
uccessfully...
[120711_182232028][][STATEMENT] [ID:11401] Time elapsed for bursting : 136107, time from beggining : 136215
[120711_182232028][][STATEMENT] [ID:11401] Time elapsed for notification : 0, time from beggining : 136215
[120711_182232029][oracle.apps.xdo.servlet.scheduler.XDOJob][STATEMENT] [ID:11401] Scheduler finished the job. Exiting...
Thanks & Regards

Database not working when network is offline

I have installed Oracle 11gExpressEdition in my office laptop. It works fine if my laptop is connected with my office network and its not working outside office network. I am trying for long time to resolve this issue but couldn't able to find success.
I tried with changing Pcname in "C:\oraclexe\app\oracle\product\11.2.0\server\network\ADMIN\listener.ora" AND "tnsnames.ora" TO "localhost" and "127.0.0.1".
Installed Windown loopback adapter and reinstalled application. But nothing works.
Can you please help me
Thanks in Advance..

Thanks for your replay,
Add to my question, database instance is running and my application can able to connect to database only issue is the link using for management portal
http://127.0.0.1:8080/apex/f?p=4950
is not working showing "Cannot display the webpage".
Here is my listner.ora
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = XE)
      (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
      (PROGRAM = extproc)
    (SID_DESC =
      (SID_NAME = CLRExtProc)
      (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
      (PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
      (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
And tnsnames.ora
XE =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
      (SID = PLSExtProc)
      (PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
      (SID = CLRExtProc)
      (PRESENTATION = RO)

Connection pooling does not work Oracle Objects! Oracle please respond!

The problem is that when we retrieve Oracle Objects using pooled connection (closing logical connection at the end of every call)it takes 6-8 times longer than in case we share the same physical connection for all database calls. Parts of our application which do not utilize Oracle Objects (just old good relational data) works just fine with pooled connections - no performance degradation
This is my reconstruction of f the what is happening behind the seen, so some parts can be not entirely correct.
OracleConnection class caches StructDescriptor objects in descriptorCache hash table. StructDescriptor objects map content of oracle STRUCTs which are retrieved through the connection onto oracle type names. For example if you retrieve an instance of HR.EMPLOYEE_T oracle object from database some metadata will be retrieved and stored as an entry in descriptorCache cache table associated with "HR.EMPLOYEE_T" key to assist CustomDatum interface. It is a time consuming process and caching of this metadata improves it dramatically.
Now when using pooled connection descriptorCache gets cleared when you close your logical connection (java.sql.Connection) so next time you get a connection from your pooled connection it will have to repopulate the cache which as I said is very time consuming. As a result even though we can reuse our physical connection by using pooled connection whole setup does not work - fetching metadata takes a long time and we cant use Oracle objects in EJB environment (or Servlet environment)
Alex Roytman
Peace Technology, Inc.
(301) 206-9696
null

check out managed datasources in the manuals

Standby Database not working

Hi I have created one standby DB for Oracle 10.1.0.2.0 on same server for the primary Db.As per Oracle docs I have configured everything but when I do logswitch on primary DB and then check the standby DB as...
SELECT SEQUENCE#, FIRST_TIME, NEXT_TIME
FROM V$ARCHIVED_LOG ORDER BY SEQUENCE#;
it shows no records, that means it is not working.
I have created standby redolog file in the primary DB , as I am using LGWR ASYN mode of redo transform but when I do..
SQL> SELECT GROUP#,THREAD#,SEQUENCE#,ARCHIVED,STATUS FROM V$STANDBY_LOG;
GROUP# THREAD# SEQUENCE# ARC STATUS
4 2 0 YES UNASSIGNED
it show the status unaccessed.
please help me to sort out this problem....
Regards

Hi
Thanks to all. Yes I checked the alert logs for both DB, there was some problems due to DB_FILE_NAME_CONVERT ini parameter setting. after I fixed that, I am getting this error in lgwr.trc file
Dump file c:\oracle\product\10.1.0\admin\orcl\bdump\orcl_lgwr_1368.trc
Tue Mar 11 15:39:17 2008
ORACLE V10.1.0.2.0 - Production vsnsta=0
vsnsql=13 vsnxtr=3
Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
Windows XP Version V5.1 Service Pack 2
CPU : 1 - type 586
Process Affinity: 0x00000000
Memory (A/P) : PH:14M/255M, PG:123M/909M, VA:1749M/2047M
Instance name: orcl
Redo thread mounted by this instance: 1
Oracle process number: 5
Windows thread id: 1368, image: ORACLE.EXE (LGWR)
*** SERVICE NAME:() 2008-03-11 15:39:17.008
*** SESSION ID:(167.1) 2008-03-11 15:39:17.008
LGWR: Archivelog for thread 1 sequence 42 will NOT be compressed
*** 2008-03-11 15:39:17.227 47100 kcrr.c
Making upidhs request to NetServer -1 (ocis 0x05FCE6E0)
ERROR: kcrrnsupidhs nsidx=-1
*** 2008-03-11 15:39:17.258 45203 kcrr.c
Initializing NetServer for dest=stby
Initializing PGA storage for Netserver communication
Allocating a brand new NetServer
Allocated NetServer 0
NetServer 0 has been started.
Subscribing to KSR Channel 0
success!
Indicating recv buffer for KSR Channel 0
success
Waiting for Netserver 0 to initialize itself
*** 2008-03-11 15:39:20.415 45488 kcrr.c
Netserver 0 has been initialized
LGWR performing a channel reset to ignore previous responses
LGWR connecting as publisher to KSR Channel 0
LGWR-NS 0 initialized for destination=stby
*** 2008-03-11 15:39:20.415 45982 kcrr.c
Making upiahm request to NetServer 0
Waiting for NetServer 0 to respond to upiahm
*** 2008-03-11 15:39:24.274 47100 kcrr.c
Making upidhs request to NetServer 0 (ocis 0x05FCE6E0)
NetServer pid:2916
*** 2008-03-11 15:39:24.274 47331 kcrr.c
upidhs done status 1031
*** 2008-03-11 15:39:24.274 46176 kcrr.c
upiahm connect done status is 1031
Error 1031 connecting to destination LOG_ARCHIVE_DEST_2 standby host 'stby'
*** 2008-03-11 15:39:24.274 47100 kcrr.c
Making upidhs request to NetServer -1 (ocis 0x05FCE6E0)
ERROR: kcrrnsupidhs nsidx=-1
Error 1031 attaching to destination LOG_ARCHIVE_DEST_2 standby host 'stby'
ORA-01031: insufficient privileges
*** 2008-03-11 15:39:24.336 52124 kcrr.c
LGWR: Error 1031 creating archivelog file 'stby'
*** 2008-03-11 15:39:24.383 50571 kcrr.c
kcrrfail: dest:2 err:1031 force:0 blast:1
*** 2008-03-11 15:39:37.680
Old character set id was US7ASCII
*** 2008-03-11 15:39:38.055
New character set id is WE8MSWIN1252
now how to give privilege to the service 'stby'.
please give me some guidance.
regards

Where can I download the patchsets.sh ftp site is not working

Hi Hussein
the ftp site for the patchsets.sh is not working.
ftp://ftp.oracle.com/support/outgoing/PATCHSET_COMPARE_TOOL/patchsets.sh
thanks
Reddy

hsawwan wrote:
schavali wrote:
Ensure that FTP service on your server is running and that the FTP port has not been blocked by security rules or software.This is Oracle FTP server, and it has nothing to do with the FTP service on the server. Just like downloading the file from a client machine.
Thanks,
HusseinTrue - I am talking about the FTP service on the OP's server/network. If the FTP service or port is blocked by security rules or software, then connection to the Oracle FTP site will appear to hang.
Srini

BPEL Process with multiple file types using one FTP adapter is not working

i created a bpel process which will fetch the files from remote location using FTP adapter.
Now the process works for only one format or file type like *.xls.
How can i use more than one file format in one FTP adapter.
OR
is there any other way to do it.
file type assignation is 5th step in FTP adapter configuration.
i have tried *.xls,*.csv and *.xls;*.csv and *.xls:*.csv by seperating with comman, colon, space... still not working.
i read the documentation *.* will not work.. for one file format it's working fine.
looking forward for reply as soon as possible.

Are you positive that it is not working? I'm not sure how you can use one FTP adapter for multiple file types unless the underlying data is exactly the same format or you are processing it as opaque data. Sometimes when a FTP adapter chokes on a file with a bad structure it doesn't create a BPEL instance, it simply moves the bad file to a separate folder.
So I assume you are using opaque as the data type instead of using an XSD element?
That said, I don't think you can put two separate file types in the filter. Is it possible for you to do something like: CommonFileName*.* or do you have similar files with other extensions?
I know the above probably isn't of much help, but I had so many problems with the FTP adapter and its lack of features that I am writing my own. Unfortunately that is a large undertaking and there isn't any good documentation of JCA resource adapter / BPEL PM integration.

SAP PI FTP sender adapter not working with SAP ECC over Itanium

Hi,
We have been running normally SAP PI 7.0 SP14 with no issue for a while.
We are now in the process of migrate the SAP ECC system from PA risc to IA platform. We are performing some tests between SAP PI and SAP ECC to check that the platform migration is not affecting us in any way and we have found that FTP adapter sender is not working anymore (receiver is working as usual).
We place some files in the new ECC system and when PI goes to retreive the files it is like it can not read anything. It gives no error but it does not pick any file. This is not happening with the old platform.
Does anyone have any idea?
Thanks a lot for your help
Diana

Hi,
I am using FTP connection and for the receiver it is working fine.
Thanks
Diana

DB13 Check database not working

Hi All,
Check DB and update stats from DB13 does not work. It comes back with the following error
Can't exec external program (No such file or directory)
Checked from OS level and found that brconnect -u / -c -f check works only from exe directory. If i execute the
command from any other directory it comes back with an error saying command not found
Upon further investigation found that this is an issue with env variable PATH
The current value of PATH in env variable of sidadm is
PATH=/oracle/SID/102_64/bin:/opt/IBMJava2-amd64-142/bin:.:/export/home/sidadm:/usr/sap/SID/DVEBMGS01/exe:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin
I want to change the value from usr/sap/SID/DVEBMGS01/exe to /usr/sap/SID/SYS/exe/run
I checked all the csh and .sh profiles for sidadm user but i did not find any PATH variable,
I can see DIR_LIBRARY and LD_LIBRARY_PATH but i cant see PATH variable
Checked the shell and it is /bin/csh
checked .bash_profile and all i can see is this
.bash_profile
Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH
unset USERNAME
Has any one faced this issue earlier??
Meanwhile i have found a temporary fix for timebeing i.e i copied all the br* executables from /sapmnt/SID/exe to
/usr/sap/SID/DVEBMGS01/exe and after doing that DB13 - DBcheck and Update optimizer works fine.
Regards,
Ershad Ahmed

Hi Sunil and Eric
Thanks for the reply
I checked all the profiles but no luck. I cant find the parameter.
As i mentioned in my earlier post i have found a temporary fix by copying the br executables from /sapmnt/SID/exe to
/usr/sap/SID/DVEBMGS01/exe and ran saproot.sh and that resolved the issue.
If i can change my PATH variable to point to /usr/sap/SID/SYS/exe/run that would be a permanent fix
Regards,
Ershad Ahmed

Java FTP client do not work in Solaris 10

We just upgrade our Solaris 8.0 system to Solaris10. A java FTP client don't work anymore when I try to download a remote file. It worked nicely in Solaris8. Specifically, this java program is using JDK FtpClient, the command that downloading a file is something like this:
TelnetInputStream in = ftpClient.get(remotefilename);
However, I still can send a file to a remote machine. Anyone knows this?
Thnak you very much!

Hello Community,
the problem is solved. The VM on the workstation is very slow. The Java EE server use more than one hour to start. No problem with the hardware key or anything else, only a problem of my patience. It seems that the configuration file of the VM stores special entrys of the basic physical machine to run optimal. And which is optimal for the notebook is not optimal for the workstation.
Cheers
Stefan
Edited by: Stefan Schnell on Mar 4, 2008 2:10 PM

Providing administrator(s) full mailbox access to all mailboxes (database) not working

I'm setting up a new Exchange 2013 org. Everything is pretty fresh, only a few mailboxes have been added for testing.
I've added this permission, to provide full access to all the mailboxes in the database:
Get-MailboxDatabase -identity “Mailbox Database” | Add-ADPermission -user netadmin -AccessRights GenericAll -ExtendedRights Receive-As, Send-As
I've verified the permission in ADSI Edit.
I have verified the permission in the recipient's mailbox delegation properties.
However, while logged into OWA using the admin account, if I try to open another user's mailbox from OWA, I just get a sad face that says "Something went wrong :( " .
Any ideas? I've tried resetting the owa virtual directory...reset IIS, rebooted several times, no luck.
Thanks

Hi
Is that ok when you set to single mailbox?
If ok, please try
Get-Mailbox -database “Mailbox Database” | Add-ADPermission -user netadmin -AccessRights GenericAll -ExtendedRights Receive-As, Send-As
Cheers
Zi Feng
TechNet Community Support
Please see the original post, I've already tried "Get-MailboxDatabase -identity “Mailbox Database” | Add-ADPermission
-user netadmin -AccessRights GenericAll -ExtendedRights Receive-As, Send-As"
If I add the permission individually through ECP, it works just fine. What I'm trying to accomplish is full mailbox access to all mailboxes in the database now and in the future
(something that works just fine in Exchange 2010,) however in 2013 it is not working. I tried doing it via a security group instead, same result.

Multiple Image Upload with save to database not working in IE anymore

Since updating IE to SP3 ADDT Multiple Image Upload with save to database does not work anymore in IE. It will show a regular file upload field, an does not allow selection of multiple files. It does work in Firefox, but not all my clients use firefox.
PSE Advice.

I would consider buying some pluggins from dmxzone.com. They
may cost a
bit upfront but in the long run, you've probably be saving a
lot of
headaches.
http://www.dmxzone.com/
If time's an issue, with these plugins, you could probably
be up and
running in a half hour. George has some really nice pluggins
for
Dreamweaver and well worth the money.
Peter Raun wrote:
>
I am going crazy here
> I will see if i can explain my problem here. . .
> I am trying to use the multiple image upload with save
to database function in
> the developer toolbox, and it work just fine, it lets me
select where to store
> the filename in database and where i want to save the
actual image on the
> server. It is wery easy to use if you just want these
functions.
> But i would also like to give every image a gallery id
in the database, so i
> can sort them out afterwards, its not whery smart to
upload a lot of images to
> a folder, and in the database you just have an image id
and an filename, i cant
> sort them into galleries with these to collums. . . . So
i guess i have to do
> something with the "additional fields" when i am
creating the server behavior
> but i cant figure out what to do?? i would have liked if
i could have made an
> list/menu with all of the availible galleries, and chose
the one that i whould
> add images too and then that gallery id whould be added
to those images in the
> database.
> I have also tried to pass on an url parameter and then
use that as a default
> value in the "additionel field" section but without any
luck at all. . . I hope
> someone here has an idea, that could help me out. . .
> It is sooooo easy to do this, when you are uploading ONE
image at a time, i
> cant figure out why it has to be sooooo hard when using
"multiple image
> upload"
>

FTP to database not working Oracle 9.2

Similar Messages

Maybe you are looking for