Ftp to windows in CRLF mode

Hi,
i wanted to send a file to windows server in CRLF mode. sorce is UNIX and target is WINDOWS. i have done following
In BPEL , created a adapter to send the file in ASCII mode
FTP adapter server type property is set to windows,
But still the file is in LF.....can anyone suggest?

ASCII mode should covert between the two sources. Are you sending from a windows machine? If so, that would explain why nothing is done to your text file.
If you invoke the local FTP client, does it do the translation you expect?

Similar Messages

FTP in Windows 2012 Failover Cluster

Hi,
Understand that Windows 2012 is having much improved Failover Clustering features,however i have faced issues when i configured FTP in Windows 2012 Failover Cluster.
1) As per the process configured the shared disk for FTP data path.
2)Installaed FTP feature in both Nodes of Clustert
3)Finally created the Generic Service in Cluster Roles for FTP Service.
After the configuration i found everything working fine but when i try to failover the FTP role found that FTP resource is not moving smoothly. Also i observed that Microsoft FTP service gets in to "starting" mode in the destination Node. To run the FTP
resource Microsft FTP service should be in Started mode.
This happens only when we try to failover else it works fine if you start freshly.
Have any one tried this? Any clue about such issue ?
Regards:Mahesh

Hi,
In earlier versions of Internet Information Services, Microsoft provided generic resource monitor components to support high availability Web server instances by using the Microsoft Clustering infrastructure. However, custom code was needed to fully realize
the potential of this solution. Also, the generic scripts that Microsoft provided did not satisfy customer needs.
From IIS 7 to configure IIS in a clustered environment by using Windows Server failover clustering, you have to use a custom (scripting) code to enable such a high availability scenario.
Note:
We recommend that administrators carefully evaluate the use of Network Load Balancing (NLB) instead of using failover clustering as the primary and preferred method for improving the scalability and availability of Web applications that have multiple servers
that are running new IIS (from IIS 7) . One benefit of NLB is that all servers can actively participate in the concurrent handling of incoming HTTP requests. Another benefit is that in an NLB IIS environment, it can be much easier to support rolling updates
and rollbacks while still providing high availability of Web applications.
To configure high availability for IIS FTP servers using Failover Clustering:
Install the Web Server role on all cluster nodes.
Install the Failover Clustering feature on all cluster nodes and create the cluster.
Set up a file share that will be used for IIS shared configuration
Configure the IIS shared configuration on all cluster nodes
Configure Offline Files for IIS Shared Configuration on all cluster nodes
Configure the FTP site and specify the location of its content on one cluster node
Configure high availability for your FTP site by creating a generic script in Failover Cluster Manager
For more detailed configuration procedure please refer to following MS articles:
Note: I didn’t find IIS 8 in Windows Server 2012 failover cluster configuration guide, below guide was published for II 7 in Windows server 2008 and Windows Server 2008 R2, but its basis configuration procedures should also apply to Windows Server 2012.
How to configure FTP 7.5 for IIS 7.0 in a Windows Server 2008 failover cluster
http://support.microsoft.com/kb/974603
Configure IIS Network Load Balancing
http://www.iis.net/learn/web-hosting/configuring-servers-in-the-windows-web-platform/network-load-balancing
Deploying IIS on a Failover Cluster
http://blogs.msdn.com/b/clustering/archive/2009/06/01/9674799.aspx
Hope this helps!
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Lawrence
TechNet Community Support

Is there a way to make itunes autostart with windows in mini mode

Is there a way to make itunes autostart with windows in mini mode i.e the taskbar player mode where it is most less obstrusive . itune takes a lot of time to start under windows

Just delete the same songs from your library in iTunes. Select the first song, hold the shift key, select the last song (which will select everything in between) and press delete.

Firefox 22.0 ONLY connects to Internet in Windows 7 'Safe Mode' (IE does connect)

FireFox 22.0 only works in Windows 7 'Safe Mode'. Any other program on computer that needs the Internet connects fine; i.e. the Internet connection is good.
Have not recently installed an update, nor 'Add-On'; this is PURELY a FireFox problem. The problem started "suddenly".. no new installs of programs etc.
Actions:
- Deleted Firefox; Re-Installed it → Same result, FF does not connect
- Reset Computer to earlier time/date → Same result.
- Created new FireFox Profile; signed in with new profile → Same result.
- Renamed 'Firefox.exe' to 'Firefox1.exe' → Same Result
- Run 'Norton Antivirus' scan → no problems found; Same result
- Deleted "Norton AntiVirus' → Same result.
- Run latest updated 'Malwarebytes Anti-Malware' scan → no problems found; Same result
- Deleted 'Anti-Malware' → Same result.
- Cleaned Registry of any 'Mozilla' and 'FireFox' reference → Same result
→ Checked in 'Safe Mode' 'Task Manager - Processes' ... few files there.
→ Checked in 'Normal Mode' 'Task Manager - Processes'.. a lot of files there...
> In 'Normal Mode' deleted 'Processes' files to bare minimum, testing FireFox after each deletion → Same Result.
Note:
In Windows 7 'Safe Mode', there are two files which are NOT shown in 'Normal Mode' in
'Task Manager - Processes';
- ctfmon.exe &
- dllhost.exe.
Can't find info on them if they're needed by FireFox or not to connect to the Internet.
> In 'Safe Mode': they are present, and FF connects.
> In 'Normal Mode': they're not present, FF does NOT connect.
Could still be coincidence.
As for the "Troubleshooting Information" that's associated with the Question page for posting this question ("..This information gives details about the internal workings of your browser that will help in answering your question...."):
"...A window will (NOT) open in the top corner..."...
Because it ONLY works in FireFox webbrowser.. and guess what?...
My Mozilla FireFox Web Browser can NOT connect to the Internet... (See Top of this Question Page).
And guess what happens when I click on "...Try these manual steps..." to provide troubleshooting information?!?!?!?
Another "..Fill in the details of your question.." page opens up...
Anybody any thoughts? Pascal Finette? Jamie Zawinski? Dave Hyatt? Joe Hewitt? Blake Ross?
Maybe anybody else from the Netscape Navigator days still around??!?! ;-)

Had deleted '''HideMyIP-P''' from computer recently, and didn't have problems untill I re-started computer... Which, come to think of it now, wasn't until a few days after deleting ''''HMIP-P''''... (computer is 'on' 24/7).
Then, on start-up, it wouldn't allow FireFox to connect to the Internet.
After reading through the website you recommneded, which mentiond ''HideMyIP-P'', I re-Installed ''HMIP-P'', then turned the "hiding" 'off' and was allowed(!) with FireFox to connect again.

Since I upgraded Windows Vista to Windows 7 iTunes only works in Windows 7 "Safe Mode".

Since I upgraded Windows Vista to Windows 7 iTunes only works in Windows 7 "Safe Mode". it will not run in the normal mode. (It ran properly in Vista) I spent several hours with the Microsoft Technician going through the "1717 suggestions, but to no avail. On my own, I tried iTunes in Windows 7 "Safe Mode" and was successful! It ran like a charm. Unfortunately, I can't run iTunes properly in "Safe Mode" I have not tried moving one set of the files yet. But if iTunes works in Safe Mode, do I need to relocate anything or do I need to find what is causing the conflict between Windows 7 and iTunes?

Which Satellite A205?
Which Windows 7 (64-bit)? What about the other laptop?
Which printer model, version, and so forth?
-Jerry

Installing Firefox with windows 7 64bit mode just does not work.

I have windows 7 64bit mode. I cannot install firefox, it crashes all the time when I open it. I know the problem is because my windows 7 is in 64bit mode. Can you (firefox support) or someone on this forum provide the simple and easy steps of getting it to work. Also can you (firefox) hurry up and release a 64bit version. I'm using google chrome and crazy browser as they seem to have no problems at all. I really want to use firefox but it just won't set up for me because I'm running win7 64bit mode. If I was running win7 32bit mode I wouldn't be having any issues. Has anyone out there got a simple step by step solution for this? It it mind boggling that with todays technology no one has a simple fix for this issue. Help!!!!!
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.70 Safari/533.4

I have been running Win 7 64 bit on an HP Pavilion lap for several months. The whole browser thing has been a nightmare. My work involves heavy duty internet research. Firefox crashes every few minutes. There is no specific event I can find that kicks this off, but running the latest Flash Players and Adobe Reader makes it a lot worse. In fact, I had to set up the adobe reader to not run within the Firefox window. I had to back off to an old version of adobe Reader and Flash Player to accomplish this. I love Firefox. I was disappointed to have to uninstall it as it was impossible to run searches with it.
So then it proved to be that IE either version 8 or 9 was even worse. I could not keep it up long enough to run a search.
So I installed Chrome which has some nice features, but it also crashes, albeit more gracefully so I do not lose my place and it makes a quick recovery but there are many online applications where Chrome just does not work.
My son also has Win7 64 bit and says he is also having the same problems.
I want my Firefox back! Please fix it.

Windows 7 XP mode

I am going to buy a new workstation(preferably DELL). In that, I would like to use a software that only runs on Windows XP SP 2. I have Win XP OS but I'm not sure whether the drivers will match with the new hardware.
I need your suggestions for this issue.
I am using virtual PC and XP mode in Windows 7 Ultimate. I downloaded these softwares from microsoft website.
The XP mode, it runs on Win XP SP 3. But, I need SP 2. Is there any solution for that?
I would like to know how to do disk partition in the system that has Virtual PC.
Suggest me any solution for this issue ASAP.

It's important to know that virtual machines are typical emulated. If you install a virtual XP, you don't need to try find drivers for example a display driver for a physical device.
So, drivers will work if the drivers are working in the host machine.
The XP mode, it runs on Win XP SP 3. But, I need SP 2. Is there any solution for that?
Hopefully this helps you.
https://social.technet.microsoft.com/Forums/windows/en-US/e77c837d-bf4b-4a3a-a33b-a85d1a52008f/can-windows-7-xp-mode-install-xp-sp2-instead-of-sp3

Windows 8.1 and VS2012 SDK get error "Windows Program Compatibility mode is on. Turn it off and then try Setup again."

When trying to install VS2012 SDK on Windows 8.1 get the error "Windows Program Compatibility mode is on. Turn it off and then try Setup again."
See my blog C# Bits | Twitter @sjnaughton Always seeking an elegant solution.

Rick, Have you had any success with this? I'm also trying to run the tfs_VssUpgrade.exe tool on my Windows 8.1 machine and getting the same exception. Greatly appreciate any insight if you were able to get past this issue! Thanks, Steve
Same issue here.
This MS connect thread
is interesting however.
Posted by Microsoft on 9/19/2013 at 2:54 PM
Hello Alxandr,
Thank you for taking the time to submit this issue to Connect. This is a known issue with Windows 8.1 RTM and it will be addressed in a future update of Windows 8.1. In the meantime, you can typically rename the EXE to get it to work correctly.

2 window view, isolate mode switches both to preview, instead of leaving 1 in outline

I wanted one of my 2 windows open to stay in outline mode when I switch the other window to preview mode.
can we do this please.
I work closely in outline on one window, and use the other to preview, however when I want to isolate a shape in the preview window to work on it, the other window loses outline mode and switches to preview also.

Apple doesn’t routinely monitor the discussions. These are mostly user to user discussions.
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback

FTP in Windows 2008 r2 ?

Hello to be able to pull down file via FTP within Windows 2008 r2 64bit does IIS need to be installed/enabled as a requirement?
Thanks in advance.

Yes. Please see the following link.
http://technet.microsoft.com/en-us/library/cc771012(v=ws.10).aspx

What do I put into "upload to FTP host" window to publish my site?

I have an account with godaddy and I have a domain name for my site. I'm just not sure what to put into the fields for the upload to FTP host window.

Please check this video which includes the steps :
https://www.youtube.com/watch?v=OwPcLnkDCXg
Thanks,
Sanjit

Setup Blocked : Windows Program Compatibility Mode

I'm trying to install "Modeling SDK for Microsoft Visual Studio 2013" on Windows 10 Tech Preview Build 10049:
https://www.microsoft.com/en-us/download/details.aspx?id=40754
But always get:
"Setup Blocked"
Windows Program Compatibility mode is on. Turn it off and then try Setup again.
Compatibility tab on the setup VS_VmSdk.exe shows compatibility mode is off. No variation of settings on that tab have any effect.
Is there any way to bypass the compatiblity check on Windows 10 Tech Preview?
Thanks,
Mike

Rick, Have you had any success with this? I'm also trying to run the tfs_VssUpgrade.exe tool on my Windows 8.1 machine and getting the same exception. Greatly appreciate any insight if you were able to get past this issue! Thanks, Steve
Same issue here.
This MS connect thread
is interesting however.
Posted by Microsoft on 9/19/2013 at 2:54 PM
Hello Alxandr,
Thank you for taking the time to submit this issue to Connect. This is a known issue with Windows 8.1 RTM and it will be addressed in a future update of Windows 8.1. In the meantime, you can typically rename the EXE to get it to work correctly.

Install windows phone 8.0 sdk on win 10 error Windows Program Compatibility mode is on. Turn it off and then try Setup again.

install windows phone 8.0 sdk on win
10 error Windows Program Compatibility mode is on. Turn it off and then try Setup again.

Also having this issue. I am unable to remove Windows Phone Emulator 8.0 on Windows 10 Technical Preview. Here is the relevant log file output
[6554:4F4C][2014-10-31T13:33:53]: Condition 'NOT (CurrentOperation = "Uninstall")' evaluates to true.
[6554:4F4C][2014-10-31T13:33:53]: Condition '(CurrentOperation = "Install") OR (CurrentOperation = "Repair")' evaluates to false.
[6554:4F4C][2014-10-31T13:33:53]: Condition '(CurrentOperation = "Install") OR (CurrentOperation = "Repair")' evaluates to false.
[6554:4F4C][2014-10-31T13:33:53]: Condition '(CurrentOperation = "Install") OR (CurrentOperation = "Repair")' evaluates to false.
[6554:4F4C][2014-10-31T13:33:53]: Condition '(CurrentOperation = "Install")' evaluates to false.
[6554:4F4C][2014-10-31T13:33:53]: Condition '(VersionNT < v6.1) OR ((VersionNT = v6.1) AND (NTProductType < 3)) OR (NOT VersionNT64)' evaluates to false.
[6554:4F4C][2014-10-31T13:33:53]: Condition '(VersionNT = v6.2) AND (netfxfullredist_43_DetectKey < v4.5.50709)' evaluates to false.
[6554:4F4C][2014-10-31T13:33:53]: Condition 'CompatibilityMode = 0' evaluates to true.
[6554:4F4C][2014-10-31T13:33:53]: Condition 'ProfessionalVersion_DetectKey AND (NOT (ProfessionalVersion_DetectKey = "11.0.50727")) AND (CurrentOperation = "Install")' evaluates to false.
[6554:4F4C][2014-10-31T13:33:53]: Condition '( VS11BETA_MSENV_DLL_EXISTS ) AND ( VS11BETA_MSENV_DLL_VERSION < v11.0.50324.0 ) AND (CurrentOperation = "Install")' evaluates to false.
[6554:4F4C][2014-10-31T13:33:53]: Condition 'WPExpressVersion_DetectKey AND (WPExpressVersion_DetectKey < v11.0.50727) AND (CurrentOperation = "Install")' evaluates to false.
[6554:4F4C][2014-10-31T13:33:53]: Condition 'WPExpressVersion_DetectKey AND (WPExpressVersion_DetectKey = v11.0.50727) AND (CurrentOperation = "Install") AND WPExpressQFEVersion_DetectKey AND (WPExpressQFEVersion_DetectKey < 38)' evaluates to false.
[6554:4F4C][2014-10-31T13:33:53]: Condition 'WPExpress10_Exists AND (NOT SameLcidWPExpress10_Exists) AND CurrentOperation = "Install"' evaluates to false.
[6554:4F4C][2014-10-31T13:33:53]: Condition 'WPExpress11_Exists AND (NOT SameLcidWPExpress11_Exists) AND CurrentOperation = "Install"' evaluates to false.
[6554:4F4C][2014-10-31T13:33:53]: Condition 'NOT Privileged' evaluates to false.
[6554:4F4C][2014-10-31T13:33:53]: MUX: Stop Block: CompatibilityMode : Windows Program Compatibility mode is on. Turn it off and then try Setup again.
[6554:4F4C][2014-10-31T13:33:53]: MUX: Detect Completed
[6554:4F4C][2014-10-31T13:33:53]: MUX: Wait for View to be loaded
[6554:40A0][2014-10-31T13:33:53]: MUX: Detect Completed, now create view
[6554:40A0][2014-10-31T13:33:54]: MUX: Validate custom path failed: Empty Install path
[6554:40A0][2014-10-31T13:33:54]: MUX: Validate custom path failed: Empty Install path
[6554:40A0][2014-10-31T13:33:54]: MUX: User feedback control is Enable because opt-in value is NotDefined
[6554:4F4C][2014-10-31T13:33:54]: MUX: View loaded
[6554:4F4C][2014-10-31T13:33:54]: MUX: Go to Blocker page.
[6554:4F4C][2014-10-31T13:33:54]: Detect complete, result: 0x0

Have to run windows in safe mode with network to have browserws work correctly. using IE and Firefox. Fist web site comes in correctly next tab just sites wai

have to run windows in safe mode with network to have browserws work correctly. using IE and Firefox. Fist web site comes in correctly next tab just sites waiting for web site Help

If it works in Windows Safe mode then you have a problem with other software, possibly security software or a system driver, that is running on your computer.<br />
It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

Nvidia Windows Kernel Driver Mode 347.52

I play World of Warcraft and recently my game has been crashing and this message keeps coming up Nvidia Windows Kernel Driver Mode 347.52 has stopped working. It also tells me my computer was unable to download the solution and to do it later but
it doesn't give me a site to go and re download what I am supposed to download. Can someone direct me to a site where I might be able to fix this problem.

Here is the forum for you

Ftp to windows in CRLF mode

Similar Messages

Maybe you are looking for