FTP with OS X Server
Hoping someone can provided some guidance/thoughts on a FTP problem I have with OS X server running on a Mac Mini. Currently I have devices FTP'ing to a Synology Diskstation with no issue. I have always found FTP setup simple in the past but am stumped migrating away from the Synology to the Mac Mini as the server. The devices (which happen to be Panasonic network cameras) that FTP to the Synology without issue can not FTP to the Mac. Here's an entry I see in the server log and I assume it's related to the issue. There is not much in the log that states have relation to FTP.
Jan 11 11:30:23 Mac-Mini-Server com.apple.xpc.launchd[1] (com.apple.ftpserver.7262CD1A-4D63-462C-933D-9BF805814421): Service instances do not support events yet.
I have the FTP started, users defined, have FTP defined under "access" as custom access with two users allow from all networks on ports 20-21. In the FTP configuration I have a share setup as /ftproot with folder permissions for the two users with read&write access. I have tried both passive and active FTP. I think I've looked through all of the server config but can find anything else that I believe needs to be set up/defined. I have validated that I can use both userids to start and FTP session when done from a terminal window, so userid/passwords appear correct. Any and all thoughts would be appreciated.
Thanks!
Further test has determined there is no issue with FTP to the defined shared folder but I'm unable to point the files to a sub-directory under the share. Is there something that has to be done to enable the sub-directory as an accessible folder under the share that is defined in the server?
Similar Messages
-
BUG - FTP with case sensitive server
My provider uses case sensitive file and directory names. I
created a directory 'OtherStuff' on the server directly (not from
remote view). In Dreamweaver's FTP setup I erred by specifying the
subdirectory of 'otherstuff'. When I created a default html file
and PUT it, FTP failed to find the directory but continued and put
the default html file in the root, overwriting my default web file.
Yes, I erred. However, it would be good if Dreamweaver would
stop when it encounters a cd failure.jjstafford wrote:
> My provider uses case sensitive file and directory
names. I created a
> directory 'OtherStuff' on the server directly (not from
remote view). In
> Dreamweaver's FTP setup I erred by specifying the
subdirectory of 'otherstuff'.
> When I created a default html file and PUT it, FTP
failed to find the
> directory but continued and put the default html file in
the root, overwriting
> my default web file.
>
> Yes, I erred. However, it would be good if Dreamweaver
would stop when it
> encounters a cd failure.
>
>
You can enable case sensitive link checking in the site
manager.
However, this is more the issue of the OS, rather then DW.
Windows -
which is the OS you use, I assume - is about the only OS
(that I know
of) which is case insensitive!
All Linux/Unix based servers are case sensitive. -
Can you FTP with "Connect to Server"?
I am using an old OS9 FTP program to maintain remote files. For the heck of it I tried to connect using the Connect to Server under Go in the menu bar. I can connect and download, but can't upload. It says that I don't have permission even though I had to use a password to get in. The server is UNIX.
Is there any way to make this a two way connection using Connect to Server? If so, please advise.
Thanks.The Finder doesn't support uploading to files on FTP servers regardless of what the permissions on the server are; see here for the reason why.
(11387) -
FTP error 426 with Windows IIS server
Dear SAP,
We are experiencing an issue between SAP PI 7.0 SP15 on P-Series AIX IBM Server and the Windows IIS FTP server. The interface in PI does connect to 3 systems with the FTP file adapter (a Mainframe, an AS400 and a Windows IIS FTP server). The mainframe and the AS400 connection are working fine but for the IIS we are getting a FTP failure in 90% of the transfers in 10% it works. With other clients (also one based on JFTP) everything works fine with the IIS server. The files are only 2kb and not to large as described in the File Adapter FAQ note.
There where tests with active (FTP failure 500) and passive connections, the timeout value was increased on both sides. The connection bandwidth reached never more than 40% and there were always enough CPU processes available on both sides.
Following technical details for the passive connection failure:
XI we do get following error log in MDT
2008-09-09 20:27:01 Success Connecting to FTP server "bla.com"
2008-09-09 20:27:02 Success Write to FTP server "bla.com", directory "/sapedi/Outbound/856otest", -> file "SAPASN253201157.txt"
2008-09-09 20:27:02 Success Transfer: "TXT" mode, size 2131 bytes, character encoding ISO8859-1
2008-09-09 20:27:02 Error Attempt to process file failed with com.sap.aii.adapter.file.ftp.FTPEx: 426 Connection closed; transfer aborted.
2008-09-09 20:27:02 Error MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Connection closed; transfer aborted.: com.sap.aii.adapter.file.ftp.FTPEx: 426 Connection closed; transfer aborted.
2008-09-09 20:27:02 Error Exception caught by adapter framework: Connection closed; transfer aborted.
The log of XI from /usr/sap/PXQ/DVEBMGS00/j2ee/cluster/server0/log/applications/com.sap.xi/xi.2.log
0#Error#1#com.sap.aii.adapter.file.util.AuditLog#Plain###FILE_ERR_211#
xi.2.log:#1.#3A2BF0015004006F0000098D00096046000456F11A40B559#1221493434398#/Applications/ExchangeInfrastructure/AdapterFramework/Services/ADAPTER/ADMIN/File#sap.com/com.sap.aii.af.app#com.sap.aii.adapter.file.XI2File.processMessage(Message)#J2EE_GUEST#0#SAP J2EE Engine JTA Transaction : [03affffff863a005363]#n/a##de1f90f0833c11dda1993a2bf0015004#XI XI2File[CC_FILE_CPS_PRC316_IN/LEG_CPSQ_BS/]_104767##0#0#Error#1#com.sap.aii.adapter.file.XI2File#Plain###File processing failed with com.sap.aii.adapter.file.ftp.FTPEx: 426 Connection closed; transfer aborted.#
xi.2.log:#1.#3A2BF0015004006F0000098F00096046000456F11A40B6AB#1221493434398#/Applications/ExchangeInfrastructure/AdapterFramework/Services/ADAPTER/ADMIN/File#sap.com/com.sap.aii.af.app#com.sap.aii.adapter.file.util.AuditLog.addAuditLog(PublicMessageKey, String, AuditLogStatus, String, String, Object[])#J2EE_GUEST#0#SAP J2EE Engine JTA Transaction : [03affffff863a005363]#n/a##de1f90f0833c11dda1993a2bf0015004#XI XI2File[CC_FILE_CPS_PRC316_IN/LEG_CPSQ_BS/]_104767##0#0#Error#1#com.sap.aii.adapter.file.util.AuditLog#Plain###FILE_ERR_211#
xi.2.log:#1.#3A2BF0015004006B000009CB00096046000456F11ABB9521#1221493442450#/Applications/ExchangeInfrastructure/AdapterFramework/Services/ADAPTER/ADMIN/File#sap.com/com.sap.aii.af.app#com.sap.aii.adapter.file.XI2File.processMessage(Message)#J2EE_GUEST#0#SAP J2EE Engine JTA Transaction : [03affffff863a005364]#n/a##1e2afb80833d11ddc03c3a2bf0015004#XI XI2File[CC_FILE_CPS_PRC316_IN/LEG_CPSQ_BS/]_104771##0#0#Error#1#com.sap.aii.adapter.file.XI2File#Plain###File processing failed with com.sap.aii.adapter.file.ftp.FTPEx: 426 Connection closed; transfer aborted.#
xi.2.log:#1.#3A2BF0015004006B000009CD00096046000456F11ABB966E#1221493442451#/Applications/ExchangeInfrastructure/AdapterFramework/Services/ADAPTER/ADMIN/File#sap.com/com.sap.aii.af.app#com.sap.aii.adapter.file.util.AuditLog.addAuditLog(PublicMessageKey, String, AuditLogStatus, String, String, Object[])#J2EE_GUEST#0#SAP J2EE Engine JTA Transaction : [03affffff863a005364]#n/a##1e2afb80833d11ddc03c3a2bf0015004#XI XI2File[CC_FILE_CPS_PRC316_IN/LEG_CPSQ_BS/]_104771##0#0#Error#1#com.sap.aii.adapter.file.util.AuditLog#Plain###FILE_ERR_211#
On the IIS server side we have the following log for the failure:
2008-09-10 08:32:50 x.x.x.20 SAPEDI MSFTPSVC1 BLA x.x.x.x 21 [68977]USER SAPEDI - 331 0 0 0 0 FTP - - - -
2008-09-10 08:32:50 x.x.x.20 SAPEDI MSFTPSVC1 BLA x.x.x.x 21 [68977]PASS - - 230 0 0 0 0 FTP - - - -
2008-09-10 08:32:50 x.x.x.20 SAPEDI MSFTPSVC1 BLA x.x.x.x 21 [68977]CWD /sapedi/Outbound/856otest - 250 0 0 0 0 FTP - - - -
2008-09-10 08:32:50 x.x.x.20 SAPEDI MSFTPSVC1 BLA x.x.x.x 21 [68977]created SAPASN253201157.txt - 426 995 0 0 16 FTP - - - -
2008-09-10 08:32:50 x.x.x.20 SAPEDI MSFTPSVC1 BLA x.x.X.X 21 [68977]QUIT - - 426 0 0 0 0 FTP - - - -
Thank you for your help.
Edited by: PhilippJ on Sep 17, 2008 3:36 PMHi,
Better to check with Basis & network team, they will sort out easily -
I still have problems with getting my website online. I have defined my server. Then I did the test and there was a connection via FTP. I put my files on the external server and there is a connection with the external server. But when I check to see my website online (with Firefox, Explorer, Chrome browser) I always get the message 'Forbidden, You don't have permission to access / on this server.' Can somebody help me please? I have to get my website online..Thank you!
Hello Els,
it's well known, that in all these cases you describe I'm not a friend of a detailed Troubleshooting (I see Nancy#s smile already).
To be able to be independent in all this things It is one of the reasons why I prefer an external FTP program. The difficulties with which you have to fight encourage me in this opinion, not least because we always search for experts, we don't charge a "jack of all trades".
To manage several websites or to upload my files and sometimes for the opposite way, for a necessary download from my server or to use a "a site-wide synch", I'm using FileZilla. It simply looks easier for me to keep track of all operations precisely and generate or reflect easily the desired tree structure.
Above all, FileZilla has a feature (translation from my German FileZilla) called "compare file list". Here it's possible to use file size or modification time as a criterion. There is also the possibility to "hide identical files", so that only these files which you want to redact remain visible.
And even if it means you have to install a new program, I am convinced that there is an advantage. Here is the link to get it and where you can read informations about how it works:
http://filezilla-project.org/ and http://wiki.filezilla-project.org/Tutorial#Using_the_site_manager
Mac: Mac OS X (Use: Show additional download options)
http://filezilla-project.org/download.php
Of course, you also need all the access data to reach your server and for MIME issues, you should contact your web host/provider.
Good luck!
Hans-Günter
P.S.
Since I use two screens, the whole thing became even more comfortable. -
How to upload site created with Dreamweaver via FTP to the iWEB server?
Hi everyone,
I recently created a site on Dreamweaver and want to upload the site, via FTP to the iWEB server. My questions are the following:
1. What is the FTP host address?
2. How do I connect to my website via FTP?
Any help on the following questions will be much appreciated.
Thanks!Hello Lauretta and welcome to the forum.
You do not connect to iDisk via FTP. iDisk uses WebDAV. Also you do not need to manually upload the published files to iDisk as recommended buy others in this thread. Once the site and server is set up in DW you can publish and upload directly through DW.app Check out this post for more info. -
If you need to FTP with PL/SQL...
If you need to perform FTP from within PL/SQL and your database version has the UTL_TCP package, here is a free package you can use. The source code is hopefully documented well enough for you to tell what's going on and how to use the functions. Suggestions on improving the code are welcome, and I can provide limited support via email for what I've written, but I would encourage anyone who uses the code to modify/fix it according to their needs. If you modify the code, I respectfully request that you leave intact the authorship and note comments at the beginning of the package.
Please note that I have not rigorously tested this code, but it has successfully transferred files in both directions in the limited tests that I have performed.
-- Copy the code below and run it in your favorite SQL editor --
CREATE OR REPLACE PACKAGE FTP IS
Simplified FTP client API using UTL_TCP package
Author: Alan Wessman, Brigham Young University
Note: This FTP client attempts to adhere to the protocol and advice found at:
http://cr.yp.to/ftp.html
No warranties are made regarding the correctness of this code.
Notes:
1. Most of these functions will raise UTL_TCP.NETWORK_ERROR if the connection
is not open or is reset during the network transaction. They will also
raise VALUE_ERROR if the server response is ill-formed or a buffer is
too small to hold data. (Most buffers in this package are defined as
VARCHAR2(32767) to avoid size limitations; reduce this if memory overhead
is a concern.)
2. "Verbose mode" can be enabled/disabled by changing the default value of
the vDebug variable in the package body. Setting vDebug to TRUE will
cause a session transcript to be output to DBMS_OUTPUT.
3. The following is an example of how this package might be used:
declare
c utl_tcp.connection;
vresp varchar2(32767);
vbuf varchar2(32767);
vresp_code number;
vremote_host varchar2(32) := 'some.hostname.com';
vusername varchar2(8) := 'username';
vpassword varchar2(8) := 'password';
begin
dbms_output.put_line( 'Opening session...' );
vresp_code := ftp.open_session( c,
vremote_host,
vusername,
vpassword,
vresp,
5 );
vresp_code := ftp.put( c,
'/home/somebody',
'local.test',
'remote.test',
vresp );
vresp_code := ftp.remote_command( c, 'CHMOD 660 remote.test' );
vresp_code := ftp.chdir( c, '/home/somebody/subdir' );
vresp_code := ftp.pwd( c );
vresp_code := ftp.get( c,
'/home/somebody',
'new_file.test',
'another_remote_file.test',
vresp );
vresp_code := ftp.close_session( c );
dbms_output.put_line( 'Closed session.' );
exception
when others then dbms_output.put_line( sqlcode || ':' || sqlerrm );
end;
Function: Open_Session
Description: Begins an FTP session with the remote server.
Parameters:
conn OUT parameter that contains the connection info; to be passed
in to subsequent commands to maintain session state.
host Name or IP address of remote server
username User ID to use for login
password Password to use for login
response OUT parameter; buffer for server replies
timeout_secs Number of seconds for TCP timeout. Pass in NULL to disable
timeout (wait forever for responses). Pass in 0 (zero) for
no wait.
Return value: 0 (zero) if operation is successful; FTP error code if operation
is not successful.
Exceptions: May raise UTL_TCP.NETWORK_ERROR if host parameter is incorrect or if
some other networking error occurs.
May raise VALUE_ERROR if server response is ill-formed.
FUNCTION Open_Session( conn OUT NOCOPY UTL_TCP.Connection,
host IN VARCHAR2,
username IN VARCHAR2,
password IN VARCHAR2,
response OUT VARCHAR2,
timeout_secs IN NUMBER DEFAULT 60 ) RETURN NUMBER;
Function: Get
Description: Retrieves a file on the remote server and stores its contents in
a VARCHAR2 buffer.
Parameters:
conn IN OUT parameter that contains the connection info; to be
passed in to subsequent commands to maintain session state.
buf OUT parameter; buffer for retrieved file contents
remote_path Pathname (including file name) indicating location of remote
file to be retrieved
response OUT parameter; buffer for server replies.
Return value: 0 (zero) if operation is successful; FTP error code if operation
is not successful.
Exceptions: May raise UTL_TCP.NETWORK_ERROR if some networking error occurs.
May raise VALUE_ERROR if server response is ill-formed or buf is
too small for file contents.
FUNCTION Get( conn IN OUT NOCOPY UTL_TCP.Connection,
buf OUT VARCHAR2,
remote_path IN VARCHAR2,
response OUT VARCHAR2 ) RETURN NUMBER;
Function: Get
Description: Retrieves a file on the remote server and stores its contents in
a local file. Assumes an open file handle and does not close it.
Parameters:
conn IN OUT parameter that contains the connection info; to be
passed in to subsequent commands to maintain session state.
local_file IN OUT parameter; UTL_FILE file handle for input file. File
is assumed to be open for writing.
remote_path Pathname (including file name) indicating location of remote
file to be retrieved
response OUT parameter; buffer for server replies.
Return value: 0 (zero) if operation is successful; FTP error code if operation
is not successful.
Exceptions: May raise UTL_TCP.NETWORK_ERROR if some networking error occurs.
May raise VALUE_ERROR if server response is ill-formed or buf is
too small for file contents.
May raise any of the UTL_FILE exceptions if file write operations
fail. See UTL_FILE documentation for additional details.
FUNCTION Get( conn IN OUT NOCOPY UTL_TCP.Connection,
local_file IN OUT UTL_FILE.File_Type,
remote_path IN VARCHAR2,
response OUT VARCHAR2 ) RETURN NUMBER;
Function: Get
Description: Retrieves a file on the remote server and stores its contents in
a local file. Opens and closes local file automatically.
Parameters:
conn IN OUT parameter that contains the connection info; to be
passed in to subsequent commands to maintain session state.
local_path Pathname of local directory in which to store the retrieved
file's contents
local_filename Name of local file in which to store retrieved file's contents
(creates new file or overwrites existing file)
remote_path Pathname (including file name) indicating location of remote
file to be retrieved
response OUT parameter; buffer for server replies.
Return value: 0 (zero) if operation is successful; FTP error code if operation
is not successful.
Exceptions: May raise UTL_TCP.NETWORK_ERROR if some networking error occurs.
May raise VALUE_ERROR if server response is ill-formed or buf is
too small for file contents.
May raise any of the UTL_FILE exceptions if file open, write, or
close operations fail. See UTL_FILE documentation for additional
details.
FUNCTION Get( conn IN OUT NOCOPY UTL_TCP.Connection,
local_path IN VARCHAR2,
local_filename IN VARCHAR2,
remote_path IN VARCHAR2,
response OUT VARCHAR2 ) RETURN NUMBER;
Function: Put
Description: Stores data as a file on the remote server
Parameters:
conn IN OUT parameter that contains the connection info; to be
passed in to subsequent commands to maintain session state.
buf IN parameter; contains data to upload
remote_path Pathname (including file name) indicating location of remote
file to be created/overwritten
response OUT parameter; buffer for server replies.
Return value: 0 (zero) if operation is successful; FTP error code if operation
is not successful.
Exceptions: May raise UTL_TCP.NETWORK_ERROR if some networking error occurs.
May raise VALUE_ERROR if server response is ill-formed.
FUNCTION Put( conn IN OUT NOCOPY UTL_TCP.Connection,
buf IN VARCHAR2,
remote_path IN VARCHAR2,
response OUT VARCHAR2 ) RETURN NUMBER;
Function: Put
Description: Uploads a local file to the remote server. Assumes an open file
handle and does not close it.
Parameters:
conn IN OUT parameter that contains the connection info; to be
passed in to subsequent commands to maintain session state.
local_file IN OUT parameter; UTL_FILE file handle for input file. File
is assumed to be open for reading.
remote_path Pathname (including file name) indicating location of remote
file to be created/overwritten.
response OUT parameter; buffer for server replies.
Return value: 0 (zero) if operation is successful; FTP error code if operation
is not successful.
Exceptions: May raise UTL_TCP.NETWORK_ERROR if some networking error occurs.
May raise VALUE_ERROR if server response is ill-formed.
May raise any of the UTL_FILE exceptions if file read operations
fail. See UTL_FILE documentation for additional details.
FUNCTION Put( conn IN OUT NOCOPY UTL_TCP.Connection,
local_file IN OUT UTL_FILE.File_Type,
remote_path IN VARCHAR2,
response OUT VARCHAR2 ) RETURN NUMBER;
Function: Put
Description: Uploads a local file to the remote server. Opens and closes local
file automatically.
Parameters:
conn IN OUT parameter that contains the connection info; to be
passed in to subsequent commands to maintain session state.
local_path Pathname of local directory in which file to upload exists.
local_filename Name of local file to upload.
remote_path Pathname (including file name) indicating location of remote
file to be created/overwritten.
response OUT parameter; buffer for server replies.
Return value: 0 (zero) if operation is successful; FTP error code if operation
is not successful.
Exceptions: May raise UTL_TCP.NETWORK_ERROR if some networking error occurs.
May raise VALUE_ERROR if server response is ill-formed.
May raise any of the UTL_FILE exceptions if file open, read, or
close operations fail. See UTL_FILE documentation for additional
details.
FUNCTION Put( conn IN OUT NOCOPY UTL_TCP.Connection,
local_path IN VARCHAR2,
local_filename IN VARCHAR2,
remote_path IN VARCHAR2,
response OUT VARCHAR2 ) RETURN NUMBER;
Function: Remote_Command
Description: Sends an arbitrary command to the server via the SITE command.
Parameters:
conn IN OUT parameter that contains the connection info; to be
passed in to subsequent commands to maintain session state.
command Command and parameter(s) to send to the server, e.g.
'CHMOD 600 foo.txt'
Return value: 0 (zero) if operation is successful; FTP error code if operation
is not successful.
Exceptions: May raise UTL_TCP.NETWORK_ERROR if some networking error occurs.
May raise VALUE_ERROR if server response is ill-formed.
FUNCTION Remote_Command( conn IN OUT NOCOPY UTL_TCP.Connection,
command IN VARCHAR2 ) RETURN NUMBER;
Function: Chdir
Description: Changes current working directory on remote server to specified
path.
Parameters:
conn IN OUT parameter that contains the connection info; to be
passed in to subsequent commands to maintain session state.
remote_path Path on remote server to change to.
Return value: 0 (zero) if operation is successful; FTP error code if operation
is not successful.
Exceptions: May raise UTL_TCP.NETWORK_ERROR if some networking error occurs.
May raise VALUE_ERROR if server response is ill-formed.
FUNCTION Chdir( conn IN OUT NOCOPY UTL_TCP.Connection,
remote_path IN VARCHAR2 ) RETURN NUMBER;
Function: Pwd
Description: Prints current working directory (on remote server) to debugging
output if debugging is turned on.
Parameters:
conn IN OUT parameter that contains the connection info; to be
passed in to subsequent commands to maintain session state.
Return value: 0 (zero) if operation is successful; FTP error code if operation
is not successful.
Exceptions: May raise UTL_TCP.NETWORK_ERROR if some networking error occurs.
May raise VALUE_ERROR if server response is ill-formed.
FUNCTION Pwd( conn IN OUT NOCOPY UTL_TCP.Connection ) RETURN NUMBER;
Function: Close_Session
Description: Closes the TCP connection to the remote server.
Parameters:
conn IN OUT parameter that contains the connection info; to be
passed in to subsequent commands to maintain session state.
Return value: 0 (zero)
Exceptions: None raised.
FUNCTION Close_Session( conn IN OUT NOCOPY UTL_TCP.Connection ) RETURN NUMBER;
Function: Close_All_Sessions
Description: Closes all currently open TCP connections.
Parameters: None.
Return value: 0 (zero)
Exceptions: None raised.
FUNCTION Close_All_Sessions RETURN NUMBER;
END FTP;
CREATE OR REPLACE PACKAGE BODY FTP IS
vDebug BOOLEAN := TRUE;
FATAL_ERROR EXCEPTION;
PROCEDURE Debug( msg IN VARCHAR2 ) IS
BEGIN
IF vDebug THEN
DBMS_OUTPUT.Put_Line( msg );
END IF;
END Debug;
FUNCTION Get_Response( conn IN OUT NOCOPY UTL_TCP.Connection,
buf IN OUT VARCHAR2 ) RETURN NUMBER IS
vLen NUMBER;
vCode NUMBER;
vResp VARCHAR2(32767);
BEGIN
vLen := UTL_TCP.READ_LINE( conn, vResp );
Debug( vResp );
-- If TO_NUMBER below fails, let the exception propagate to calling proc
vCode := TO_NUMBER( SUBSTR( vResp, 1, 3 ) );
vResp := SUBSTR( vResp, 4 );
buf := buf || SUBSTR( vResp, 2 );
IF SUBSTR( vResp, 1, 1 ) = '-' THEN
LOOP
vLen := UTL_TCP.READ_LINE( conn, vResp );
Debug( vResp );
<<Get_Code>>
BEGIN
vCode := TO_NUMBER( SUBSTR( vResp, 1, 3 ) );
vResp := SUBSTR( vResp, 4 );
IF SUBSTR( vResp, 1, 1 ) = ' ' THEN
buf := buf || SUBSTR( vResp, 2 );
EXIT;
END IF;
EXCEPTION WHEN VALUE_ERROR THEN NULL;
END Get_Code;
buf := buf || vResp;
END LOOP;
END IF;
RETURN vCode;
END Get_Response;
FUNCTION Do_Command( conn IN OUT NOCOPY UTL_TCP.Connection,
cmd IN VARCHAR2,
response OUT VARCHAR2 ) RETURN NUMBER IS
vResult NUMBER := 0;
BEGIN
vResult := UTL_TCP.WRITE_LINE( conn, cmd );
vResult := Get_Response( conn, response );
RETURN vResult;
END Do_Command;
FUNCTION Parse_Port_Number( port_string IN VARCHAR2 ) RETURN NUMBER IS
vResult NUMBER;
vNew_Port_String VARCHAR2(32767);
BEGIN
-- This stuff parses out the port number encoding from the server reply
-- Reply is in the format xyzh1,h2,h3,h4,p1,p2xyz
-- xyz = possible character data (server-dependent, may not exist)
-- h1-h4 = server IP elements; ignore since we know the host already
-- p1,p2 = port number encoding (port number = p1 * 256 + p2 )
vNew_Port_String := TRANSLATE( port_string, '0123456789', '0000000000' );
vNew_Port_String := SUBSTR( port_string,
INSTR( vNew_Port_String, '0' ),
INSTR( vNew_Port_String, '0', -1 ) -
INSTR( vNew_Port_String, '0' ) + 1 );
vNew_Port_String := SUBSTR( vNew_Port_String,
INSTR( vNew_Port_String, ',', 1, 4 ) + 1 );
vResult := 256 * TO_NUMBER( SUBSTR( vNew_Port_String,
1,
INSTR( vNew_Port_String, ',' ) - 1 ) );
vResult := vResult + TO_NUMBER( SUBSTR( vNew_Port_String,
INSTR( vNew_Port_String, ',' ) + 1 ) );
RETURN vResult;
-- Allow VALUE_ERROR to propagate
END Parse_Port_Number;
FUNCTION Open_Session( conn OUT NOCOPY UTL_TCP.Connection,
host IN VARCHAR2,
username IN VARCHAR2,
password IN VARCHAR2,
response OUT VARCHAR2,
timeout_secs IN NUMBER DEFAULT 60 ) RETURN NUMBER IS
vResp_Code NUMBER;
vGarbage NUMBER; -- For calling functions when we don't care about return val
BEGIN
conn := UTL_TCP.OPEN_CONNECTION( host,
21,
tx_timeout => timeout_secs );
vResp_Code := Get_Response( conn, response );
IF vResp_Code = 220 THEN
vResp_Code := Do_Command( conn, 'USER ' || username, response );
IF vResp_Code IN ( 331, 332 ) THEN
vResp_Code := Do_Command( conn, 'PASS ' || password, response );
IF vResp_Code NOT IN ( 202, 230 ) THEN
RAISE FATAL_ERROR;
END IF;
ELSE
RAISE FATAL_ERROR;
END IF;
END IF;
vResp_Code := Do_Command( conn, 'TYPE I', response );
Debug( 'Logged into ' || conn.remote_host || ' at port ' || conn.remote_port );
RETURN 0;
EXCEPTION
WHEN FATAL_ERROR THEN
Debug( 'Fatal error opening session:' );
Debug( ' Code: ' || vResp_Code );
Debug( ' Response: ' || response );
vGarbage := Close_Session( conn );
RETURN vResp_Code;
END Open_Session;
FUNCTION Get( conn IN OUT NOCOPY UTL_TCP.Connection,
buf OUT VARCHAR2,
remote_path IN VARCHAR2,
response OUT VARCHAR2 ) RETURN NUMBER IS
vResp VARCHAR2(32767);
vResp_Code NUMBER;
vNew_Conn UTL_TCP.Connection;
vNew_Port NUMBER;
BEGIN
-- do PASV
vResp_Code := Do_Command( conn, 'PASV', response );
IF vResp_Code = 227 THEN
<<Switch_Port>>
BEGIN
vNew_Port := Parse_Port_Number( response );
vNew_Conn := UTL_TCP.OPEN_CONNECTION( conn.remote_host,
vNew_Port,
tx_timeout => conn.tx_timeout );
Debug( 'Data connection: ' || vNew_Conn.remote_host || ':' || vNew_Conn.remote_port );
vResp_Code := Do_Command( conn, 'RETR ' || REPLACE( remote_path, CHR(12), CHR(0) ), response );
IF vResp_Code <> 150 THEN
RAISE FATAL_ERROR;
END IF;
<<Get_Download>>
BEGIN
LOOP
vResp := vResp || UTL_TCP.GET_LINE( vNew_Conn, FALSE );
END LOOP;
EXCEPTION
WHEN UTL_TCP.END_OF_INPUT THEN NULL;
END Get_Download;
vResp_Code := Close_Session( vNew_Conn );
vResp_Code := Get_Response( conn, response );
IF vResp_Code BETWEEN 400 AND 599 THEN
RAISE FATAL_ERROR;
END IF;
EXCEPTION
WHEN OTHERS THEN
Debug( SQLERRM );
RAISE FATAL_ERROR;
END Switch_Port;
ELSE
RAISE FATAL_ERROR;
END IF;
vResp_Code := Close_Session( vNew_Conn );
buf := vResp;
RETURN 0;
EXCEPTION
WHEN FATAL_ERROR THEN
Debug( 'Fatal error getting ' || remote_path || ':' );
Debug( ' Code: ' || vResp_Code );
Debug( ' Response: ' || response );
vResp_Code := Close_Session( vNew_Conn );
RETURN vResp_Code;
WHEN OTHERS THEN
Debug( vResp_Code || ': ' || SQLERRM );
RETURN vResp_Code;
END Get;
FUNCTION Get( conn IN OUT NOCOPY UTL_TCP.Connection,
local_file IN OUT UTL_FILE.File_Type,
remote_path IN VARCHAR2,
response OUT VARCHAR2 ) RETURN NUMBER IS
vResp VARCHAR2(32767);
vResp_Code NUMBER := -1;
vNew_Conn UTL_TCP.Connection;
vNew_Port NUMBER;
BEGIN
-- do PASV
vResp_Code := Do_Command( conn, 'PASV', response );
IF vResp_Code = 227 THEN
<<Switch_Port>>
BEGIN
vNew_Port := Parse_Port_Number( response );
vNew_Conn := UTL_TCP.OPEN_CONNECTION( conn.remote_host,
vNew_Port,
tx_timeout => conn.tx_timeout );
Debug( 'Data connection: ' || vNew_Conn.remote_host || ':' || vNew_Conn.remote_port );
vResp_Code := Do_Command( conn, 'RETR ' || REPLACE( remote_path, CHR(12), CHR(0) ), response );
IF vResp_Code <> 150 THEN
RAISE FATAL_ERROR;
END IF;
<<Get_Download>>
BEGIN
LOOP
vResp := UTL_TCP.GET_LINE( vNew_Conn, FALSE );
UTL_FILE.Put( local_file, vResp );
END LOOP;
EXCEPTION
WHEN UTL_TCP.END_OF_INPUT THEN NULL;
END Get_Download;
vResp_Code := Close_Session( vNew_Conn );
vResp_Code := Get_Response( conn, response );
IF vResp_Code BETWEEN 400 AND 599 THEN
RAISE FATAL_ERROR;
END IF;
EXCEPTION
WHEN OTHERS THEN
Debug( SQLERRM );
RAISE FATAL_ERROR;
END Switch_Port;
ELSE
RAISE FATAL_ERROR;
END IF;
vResp_Code := Close_Session( vNew_Conn );
RETURN 0;
EXCEPTION
WHEN FATAL_ERROR THEN
Debug( 'Fatal error getting ' || remote_path || ':' );
Debug( ' Code: ' || vResp_Code );
Debug( ' Response: ' || response );
vResp_Code := Close_Session( vNew_Conn );
RETURN vResp_Code;
WHEN OTHERS THEN
Debug( vResp_Code || ': ' || SQLERRM );
RETURN vResp_Code;
END Get;
FUNCTION Get( conn IN OUT NOCOPY UTL_TCP.Connection,
local_path IN VARCHAR2,
local_filename IN VARCHAR2,
remote_path IN VARCHAR2,
response OUT VARCHAR2 ) RETURN NUMBER IS
vFile UTL_FILE.File_Type;
vResult NUMBER := -1;
BEGIN
vFile := UTL_FILE.FOPEN( local_path, local_filename, 'w' );
vResult := Get( conn, vFile, remote_path, response );
UTL_FILE.FCLOSE( vFile );
RETURN vResult;
EXCEPTION WHEN OTHERS THEN
IF UTL_FILE.IS_OPEN( vFile ) THEN
UTL_FILE.FCLOSE( vFile );
END IF;
RAISE;
END Get;
FUNCTION Put( conn IN OUT NOCOPY UTL_TCP.Connection,
buf IN VARCHAR2,
remote_path IN VARCHAR2,
response OUT VARCHAR2 ) RETURN NUMBER IS
vResp VARCHAR2(32767);
vResp_Code NUMBER;
vNew_Conn UTL_TCP.Connection;
vNew_Port NUMBER;
BEGIN
-- do PASV
vResp_Code := Do_Command( conn, 'PASV', response );
IF vResp_Code = 227 THEN
<<Switch_Port>>
BEGIN
vNew_Port := Parse_Port_Number( response );
vNew_Conn := UTL_TCP.OPEN_CONNECTION( conn.remote_host,
vNew_Port,
tx_timeout => conn.tx_timeout );
Debug( 'Data connection: ' || vNew_Conn.remote_host || ':' || vNew_Conn.remote_port );
vResp_Code := Do_Command( conn, 'STOR ' || REPLACE( remote_path, CHR(12), CHR(0) ), response );
IF vResp_Code <> 150 THEN
RAISE FATAL_ERROR;
END IF;
vResp_Code := UTL_TCP.WRITE_TEXT( vNew_Conn, buf );
UTL_TCP.FLUSH( vNew_Conn );
vResp_Code := Close_Session( vNew_Conn );
vResp_Code := Get_Response( conn, response );
IF vResp_Code BETWEEN 400 AND 599 THEN
RAISE FATAL_ERROR;
END IF;
EXCEPTION
WHEN OTHERS THEN
Debug( SQLERRM );
RAISE FATAL_ERROR;
END Switch_Port;
ELSE
RAISE FATAL_ERROR;
END IF;
vResp_Code := Close_Session( vNew_Conn );
response := vResp;
RETURN 0;
EXCEPTION
WHEN FATAL_ERROR THEN
Debug( 'Fatal error putting ' || remote_path || ':' );
Debug( ' Code: ' || vResp_Code );
Debug( ' Response: ' || response );
vResp_Code := Close_Session( vNew_Conn );
RETURN vResp_Code;
WHEN OTHERS THEN
Debug( vResp_Code || ': ' || SQLERRM );
RETURN vResp_Code;
END Put;
FUNCTION Put( conn IN OUT NOCOPY UTL_TCP.Connection,
local_file IN OUT UTL_FILE.File_Type,
remote_path IN VARCHAR2,
response OUT VARCHAR2 ) RETURN NUMBER IS
vResp VARCHAR2(32767);
vResp_Code NUMBER;
vNew_Conn UTL_TCP.Connection;
vNew_Port NUMBER;
vNew_Port_String VARCHAR2(32767);
BEGIN
-- do PASV
vResp_Code := Do_Command( conn, 'PASV', response );
IF vResp_Code = 227 THEN
<<Switch_Port>>
BEGIN
vNew_Port := Parse_Port_Number( response );
vNew_Conn := UTL_TCP.OPEN_CONNECTION( conn.remote_host,
vNew_Port,
tx_timeout => conn.tx_timeout );
Debug( 'Data connection: ' || vNew_Conn.remote_host || ':' || vNew_Conn.remote_port );
vResp_Code := Do_Command( conn, 'STOR ' || REPLACE( remote_path, CHR(12), CHR(0) ), response );
IF vResp_Code <> 150 THEN
RAISE FATAL_ERROR;
END IF;
<<Get_Download>>
BEGIN
LOOP
UTL_FILE.Get_Line( local_file, vResp );
vResp_Code := UTL_TCP.WRITE_LINE( vNew_Conn, vResp );
END LOOP;
EXCEPTION
WHEN NO_DATA_FOUND THEN NULL;
END Get_Download;
vResp_Code := Close_Session( vNew_Conn );
vResp_Code := Get_Response( conn, response );
IF vResp_Code BETWEEN 400 AND 599 THEN
RAISE FATAL_ERROR;
END IF;
EXCEPTION
WHEN OTHERS THEN
Debug( SQLERRM );
RAISE FATAL_ERROR;
END Switch_Port;
ELSE
RAISE FATAL_ERROR;
END IF;
vResp_Code := Close_Session( vNew_Conn );
RETURN 0;
EXCEPTION
WHEN FATAL_ERROR THEN
Debug( 'Fatal error putting ' || remote_path || ':' );
Debug( ' Code: ' || vResp_Code );
Debug( ' Response: ' || response );
vResp_Code := Close_Session( vNew_Conn );
RETURN vResp_Code;
WHEN OTHERS THEN
Debug( vResp_Code || ': ' || SQLERRM );
RETURN vResp_Code;
END Put;
FUNCTION Put( conn IN OUT NOCOPY UTL_TCP.Connection,
local_path IN VARCHAR2,
local_filename IN VARCHAR2,
remote_path IN VARCHAR2,
response OUT VARCHAR2 ) RETURN NUMBER IS
vFile UTL_FILE.File_Type;
vResult NUMBER;
BEGIN
vFile := UTL_FILE.FOPEN( local_path, local_filename, 'r' );
vResult := Put( conn, vFile, remote_path, response );
UTL_FILE.FCLOSE( vFile );
RETURN vResult;
EXCEPTION WHEN OTHERS THEN
IF UTL_FILE.IS_OPEN( vFile ) THEN
UTL_FILE.FCLOSE( vFile );
END IF;
RAISE;
END Put;
FUNCTION Remote_Command( conn IN OUT NOCOPY UTL_TCP.Connection,
command IN VARCHAR2 ) RETURN NUMBER IS
vResp_Code NUMBER;
vResponse VARCHAR2(32767);
BEGIN
vResp_Code := Do_Command( conn, 'SITE ' || command, vResponse );
IF vResp_Code BETWEEN 500 AND 599 THEN
RETURN vResp_Code;
END IF;
RETURN 0;
END Remote_Command;
FUNCTION Chdir( conn IN OUT NOCOPY UTL_TCP.Connection,
remote_path IN VARCHAR2 ) RETURN NUMBER IS
vResp_Code NUMBER;
vResponse VARCHAR2(32767);
BEGIN
vResp_Code := Do_Command( conn, 'CWD ' || REPLACE( remote_path, CHR(12), CHR(0) ), vResponse );
IF vResp_Code BETWEEN 500 AND 599 THEN
RETURN vResp_Code;
END IF;
RETURN 0;
END Chdir;
FUNCTION Pwd( conn IN OUT NOCOPY UTL_TCP.Connection ) RETURN NUMBER IS
vResp_Code NUMBER;
vResponse VARCHAR2(32767);
BEGIN
vResp_Code := Do_Command( conn, 'PWD', vResponse );
IF vResp_Code BETWEEN 500 AND 599 THEN
RETURN vResp_Code;
END IF;
RETURN 0;
END Pwd;
FUNCTION Close_Session( conn IN OUT NOCOPY UTL_TCP.Connection ) RETURN NUMBER IS
BEGIN
IF conn.remote_host IS NULL THEN
RETURN 0;
END IF;
Debug( 'Closing connection on ' || conn.remote_host || ':' || conn.remote_port );
UTL_TCP.Close_Connection( conn );
RETURN 0;
EXCEPTION
WHEN UTL_TCP.NETWORK_ERROR THEN RETURN 0;
END Close_Session;
FUNCTION Close_All_Sessions RETURN NUMBER IS
BEGIN
UTL_TCP.Close_All_Connections;
RETURN 0;
END Close_All_Sessions;
END FTP;Here's another PL/SQL package that will FTP ASCII text files. It assumes that you have proper permissions on the remote host and simply want to transfer one or more text files, not perform any other miscellaneous commands.
Also, from what I have read, in 9i UTL_FILE supports reading and writing of binary data so an FTP client could be written to transfer either ASCII or BINARY files.
Regards,
Russ
CREATE OR REPLACE PACKAGE BRNC_FTP_PKG
AS
* PL/SQL FTP Client
* Created by: Russ Johnson, Braun Consulting
* www.braunconsult.com
* OVERVIEW
* This package uses the standard packages UTL_FILE and UTL_TCP to perform
* client-side FTP functionality (PUT and GET) for text files as defined in
* the World Wide Web Consortium's RFC 959 document - http://www.w3.org/Protocols/rfc959/
* The procedures and functions in this package allow single or multiple file transfer using
* standard TCP/IP connections.
* LIMITATIONS
* Currently the API is limited to transfer of ASCII text files only. This is
* primarily because UTL_FILE only supports text I/O, but also because the original
* design was for creating text files from data in the Oracle database, then transferring the file to a remote host.
* Furthermore, the API does not support SSH/Secure FTP or connection through a proxy server.
* Keep in mind that FTP passes the username/password combo in plain text over TCP/IP.
* DB versions - 8i (8.1.x) and above. 8.0.x may work if it has the SYS.UTL_TCP package.
* Note: Since UTL_FILE is used for the client-side I/O, this package is also limited to
* transfer of files that exist in directories available to UTL_FILE for read/write.
* These directories are defined by the UTL_FILE_DIR parameter in the init.ora file.
* USAGE
* Three functions are available for FTP - PUT, GET, and FTP_MULTIPLE. FTP_MULTIPLE takes
* a table of records that define the files to be transferred (filename, directory, etc.).
* That table can have 1 record or multiple records. The PUT and GET functions are included
* for convenience to FTP one file at a time. PUT and GET return true if the file is transferred
* successfully and false if it fails. FTP_MULTIPLE returns true if no batch-level errors occur
* (such as an invalid host, refused connection, or invalid login information). It also takes the
* table of file records IN and passes it back OUT. Each record contains individual error information.
* EXAMPLE
* Transfer multiple files - 1 GET and 2 PUT from a Windows machine to a host (assuming UNIX here).
* Display any errors that occur.
* DECLARE
* v_username VARCHAR2(40) := 'rjohnson';
* v_password VARCHAR2(40) := 'password';
* v_hostname VARCHAR2(255) := 'ftp.oracle.com';
* v_error_message VARCHAR2(1000);
* b_put BOOLEAN;
* t_files BRNC_FTP_PKG.t_ftp_rec; -- Declare our table of file records
* BEGIN
* t_files(1).localpath := 'd:\oracle\utl_file\outbound';
* t_files(1).filename := 'myfile1.txt';
* t_files(1).remotepath := '/home/oracle/text_files';
* t_files(1).transfer_mode := 'PUT';
* t_files(2).localpath := 'd:\oracle\utl_file\inbound';
* t_files(2).filename := 'incoming_file.xml';
* t_files(2).remotepath := '/home/oracle/xml_files';
* t_files(2).transfer_mode := 'GET';
* t_files(3).localpath := 'd:\oracle\utl_file\outbound';
* t_files(3).filename := 'myfile2.txt';
* t_files(3).remotepath := '/home';
* t_files(3).transfer_mode := 'PUT';
* b_put := BRNC_FTP_PKG.FTP_MULTIPLE(v_error_message,
* t_files,
* v_username,
* v_password,
* v_hostname);
* IF b_put = TRUE
* THEN
* FOR i IN t_files.FIRST..t_files.LAST
* LOOP
* IF t_files.EXISTS(i)
* THEN
* DBMS_OUTPUT.PUT_LINE(t_files(i).status||' | '||
* t_files(i).error_message||' | '||
* to_char(t_files(i).bytes_transmitted)||' | '||
* to_char(t_files(i).trans_start,'YYYY-MM-DD HH:MI:SS')||' | '||
* to_char(t_files(i).trans_end,'YYYY-MM-DD HH:MI:SS'));
* END IF;
* END LOOP;
* ELSE
* DBMS_OUTPUT.PUT_LINE(v_error_message);
* END IF;
* EXCEPTION
* WHEN OTHERS
* THEN
* DBMS_OUTPUT.PUT_LINE(SQLERRM);
* END;
* CREDITS
* The W3C's RFC 959 that describes the FTP process.
* http://www.w3c.org
* Much of the PL/SQL code in this package was based on Java code written by
* Bruce Blackshaw of Enterprise Distributed Technologies Ltd. None of that code
* was copied, but the objects and methods greatly helped my understanding of the
* FTP Client process.
* http://www.enterprisedt.com
* VERSION HISTORY
* 1.0 11/19/2002 Unit-tested single and multiple transfers between disparate hosts.
* Exceptions
ctrl_exception EXCEPTION;
data_exception EXCEPTION;
* Constants - FTP valid response codes
CONNECT_CODE CONSTANT PLS_INTEGER := 220;
USER_CODE CONSTANT PLS_INTEGER := 331;
LOGIN_CODE CONSTANT PLS_INTEGER := 230;
PWD_CODE CONSTANT PLS_INTEGER := 257;
PASV_CODE CONSTANT PLS_INTEGER := 227;
CWD_CODE CONSTANT PLS_INTEGER := 250;
TSFR_START_CODE1 CONSTANT PLS_INTEGER := 125;
TSFR_START_CODE2 CONSTANT PLS_INTEGER := 150;
TSFR_END_CODE CONSTANT PLS_INTEGER := 226;
QUIT_CODE CONSTANT PLS_INTEGER := 221;
SYST_CODE CONSTANT PLS_INTEGER := 215;
TYPE_CODE CONSTANT PLS_INTEGER := 200;
* FTP File record datatype
* Elements:
* localpath - full directory name in which the local file resides or will reside
* Windows: 'd:\oracle\utl_file'
* UNIX: '/home/oracle/utl_file'
* filename - filename and extension for the file to be received or sent
* changing the filename for the PUT or GET is currently not allowed
* Examples: 'myfile.dat' 'myfile20021119.xml'
* remotepath - full directory name in which the local file will be sent or the
* remote file exists. Should be in UNIX format regardless of FTP server - '/one/two/three'
* filetype - reserved for future use, ignored in code
* transfer_mode - 'PUT' or 'GET'
* status - status of the transfer. 'ERROR' or 'SUCCESS'
* error_message - meaningful (hopefully) error message explaining the reason for failure
* bytes_transmitted - how many bytes were sent/received
* trans_start - date/time the transmission started
* trans_end - date/time the transmission ended
TYPE r_ftp_rec IS RECORD(localpath VARCHAR2(255),
filename VARCHAR2(255),
remotepath VARCHAR2(255),
filetype VARCHAR2(20),
transfer_mode VARCHAR2(5),
status VARCHAR2(40),
error_message VARCHAR2(255),
bytes_transmitted NUMBER,
trans_start DATE,
trans_end DATE);
* FTP File Table - used to store many files for transfer
TYPE t_ftp_rec IS TABLE of r_ftp_rec INDEX BY BINARY_INTEGER;
* Internal convenience procedure for creating passive host IP address
* and port number.
PROCEDURE CREATE_PASV(p_pasv_cmd IN VARCHAR2,
p_pasv_host OUT VARCHAR2,
p_pasv_port OUT NUMBER);
* Function used to validate FTP server responses based on the
* code passed in p_code. Reads single or multi-line responses.
FUNCTION VALIDATE_REPLY(p_ctrl_con IN OUT UTL_TCP.CONNECTION,
p_code IN PLS_INTEGER,
p_reply OUT VARCHAR2)
RETURN BOOLEAN;
* Function used to validate FTP server responses based on the
* code passed in p_code. Reads single or multi-line responses.
* Overloaded because some responses can have 2 valid codes.
FUNCTION VALIDATE_REPLY(p_ctrl_con IN OUT UTL_TCP.CONNECTION,
p_code1 IN PLS_INTEGER,
p_code2 IN PLS_INTEGER,
p_reply OUT VARCHAR2)
RETURN BOOLEAN;
* Procedure that handles the actual data transfer. Meant
* for internal package use. Returns information about the
* actual transfer.
PROCEDURE TRANSFER_ASCII(u_ctrl_con IN OUT UTL_TCP.CONNECTION,
p_localpath IN VARCHAR2,
p_filename IN VARCHAR2,
p_pasv_host IN VARCHAR2,
p_pasv_port IN PLS_INTEGER,
p_transfer_mode IN VARCHAR2,
v_status OUT VARCHAR2,
v_error_message OUT VARCHAR2,
n_bytes_transmitted OUT NUMBER,
d_trans_start OUT DATE,
d_trans_end OUT DATE);
* Function to handle FTP of many files.
* Returns TRUE if no batch-level errors occur.
* Returns FALSE if a batch-level error occurs.
* Parameters:
* p_error_msg - error message for batch level errors
* p_files - BRNC_FTP_PKG.t_ftp_rec table type. Accepts
* list of files to be transferred (may be any combination of PUT or GET)
* returns the table updated with transfer status, error message,
* bytes_transmitted, transmission start date/time and transmission end
* date/time
* p_username - username for FTP server
* p_password - password for FTP server
* p_hostname - hostname or IP address of server Ex: 'ftp.oracle.com' or '127.0.0.1'
* p_port - port number to connect on. FTP is usually on 21, but this may be overridden
* if the server is configured differently.
FUNCTION FTP_MULTIPLE(p_error_msg OUT VARCHAR2,
p_files IN OUT t_ftp_rec,
p_username IN VARCHAR2,
p_password IN VARCHAR2,
p_hostname IN VARCHAR2,
p_port IN PLS_INTEGER DEFAULT 21)
RETURN BOOLEAN;
* Convenience function for single-file PUT
* Parameters:
* p_localpath - full directory name in which the local file resides or will reside
* Windows: 'd:\oracle\utl_file'
* UNIX: '/home/oracle/utl_file'
* p_filename - filename and extension for the file to be received or sent
* changing the filename for the PUT or GET is currently not allowed
* Examples: 'myfile.dat' 'myfile20021119.xml'
* p_remotepath - full directory name in which the local file will be sent or the
* remote file exists. Should be in UNIX format regardless of FTP server - '/one/two/three'
* p_username - username for FTP server
* p_password - password for FTP server
* p_hostname - FTP server IP address or host name Ex: 'ftp.oracle.com' or '127.0.0.1'
* v_status - status of the transfer. 'ERROR' or 'SUCCESS'
* v_error_message - meaningful (hopefully) error message explaining the reason for failure
* n_bytes_transmitted - how many bytes were sent/received
* d_trans_start - date/time the transmission started
* d_trans_end - date/time the transmission ended
* p_port - port number to connect to, default is 21
* p_filetype - always set to 'ASCII', reserved for future use, ignored in code
FUNCTION PUT(p_localpath IN VARCHAR2,
p_filename IN VARCHAR2,
p_remotepath IN VARCHAR2,
p_username IN VARCHAR2,
p_password IN VARCHAR2,
p_hostname IN VARCHAR2,
v_status OUT VARCHAR2,
v_error_message OUT VARCHAR2,
n_bytes_transmitted OUT NUMBER,
d_trans_start OUT DATE,
d_trans_end OUT DATE,
p_port IN PLS_INTEGER DEFAULT 21,
p_filetype IN VARCHAR2 := 'ASCII')
RETURN BOOLEAN;
* Convenience function for single-file GET
* Parameters:
* p_localpath - full directory name in which the local file resides or will reside
* Windows: 'd:\oracle\utl_file'
* UNIX: '/home/oracle/utl_file'
* p_filename - filename and extension for the file to be received or sent
* changing the filename for the PUT or GET is currently not allowed
* Examples: 'myfile.dat' 'myfile20021119.xml'
* p_remotepath - full directory name in which the local file will be sent or the
* remote file exists. Should be in UNIX format regardless of FTP server - '/one/two/three'
* p_username - username for FTP server
* p_password - password for FTP server
* p_hostname - FTP server IP address or host name Ex: 'ftp.oracle.com' or '127.0.0.1'
* v_status - status of the transfer. 'ERROR' or 'SUCCESS'
* v_error_message - meaningful (hopefully) error message explaining the reason for failure
* n_bytes_transmitted - how many bytes were sent/received
* d_trans_start - date/time the transmission started
* d_trans_end - date/time the transmission ended
* p_port - port number to connect to, default is 21
* p_filetype - always set to 'ASCII', reserved for future use, ignored in code
FUNCTION GET(p_localpath IN VARCHAR2,
p_filename IN VARCHAR2,
p_remotepath IN VARCHAR2,
p_username IN VARCHAR2,
p_password IN VARCHAR2,
p_hostname IN VARCHAR2,
v_status OUT VARCHAR2,
v_error_message OUT VARCHAR2,
n_bytes_transmitted OUT NUMBER,
d_trans_start OUT DATE,
d_trans_end OUT DATE,
p_port IN PLS_INTEGER DEFAULT 21,
p_filetype IN VARCHAR2 := 'ASCII')
RETURN BOOLEAN;
END BRNC_FTP_PKG;
CREATE OR REPLACE PACKAGE BODY BRNC_FTP_PKG
AS
** Create the passive host IP and port number to connect to
PROCEDURE CREATE_PASV(p_pasv_cmd IN VARCHAR2,
p_pasv_host OUT VARCHAR2,
p_pasv_port OUT NUMBER)
IS
v_pasv_cmd VARCHAR2(30) := p_pasv_cmd; --Host and port to connect to for data transfer
n_port_dec NUMBER;
n_port_add NUMBER;
BEGIN
p_pasv_host := REPLACE(SUBSTR(v_pasv_cmd,1,INSTR(v_pasv_cmd,',',1,4)-1),',','.');
n_port_dec := TO_NUMBER(SUBSTR(v_pasv_cmd,INSTR(v_pasv_cmd,',',1,4)+1,(INSTR(v_pasv_cmd,',',1,5)-(INSTR(v_pasv_cmd,',',1,4)+1))));
n_port_add := TO_NUMBER(SUBSTR(v_pasv_cmd,INSTR(v_pasv_cmd,',',1,5)+1,LENGTH(v_pasv_cmd)-INSTR(v_pasv_cmd,',',1,5)));
p_pasv_port := (n_port_dec*256) + n_port_add;
EXCEPTION
WHEN OTHERS
THEN
--DBMS_OUTPUT.PUT_LINE(SQLERRM);
RAISE;
END CREATE_PASV;
** Read a single or multi-line reply from the FTP server and validate
** it against the code passed in p_code.
** Return TRUE if reply code matches p_code, FALSE if it doesn't or error
** occurs
** Send full server response back to calling procedure
FUNCTION VALIDATE_REPLY(p_ctrl_con IN OUT UTL_TCP.CONNECTION,
p_code IN PLS_INTEGER,
p_reply OUT VARCHAR2)
RETURN BOOLEAN
IS
n_code VARCHAR2(3) := p_code;
n_byte_count PLS_INTEGER;
v_msg VARCHAR2(255);
n_line_count PLS_INTEGER := 0;
BEGIN
LOOP
v_msg := UTL_TCP.GET_LINE(p_ctrl_con);
n_line_count := n_line_count + 1;
IF n_line_count = 1
THEN
p_reply := v_msg;
ELSE
p_reply := p_reply || SUBSTR(v_msg,4);
END IF;
EXIT WHEN INSTR(v_msg,'-',1,1) <> 4;
END LOOP;
IF to_number(SUBSTR(p_reply,1,3)) = n_code
THEN
RETURN TRUE;
ELSE
RETURN FALSE;
END IF;
EXCEPTION
WHEN OTHERS
THEN
p_reply := SQLERRM;
RETURN FALSE;
END VALIDATE_REPLY;
** Reads a single or multi-line reply from the FTP server
** Return TRUE if reply code matches p_code1 or p_code2,
** FALSE if it doesn't or error occurs
** Send full server response back to calling procedure
FUNCTION VALIDATE_REPLY(p_ctrl_con IN OUT UTL_TCP.CONNECTION,
p_code1 IN PLS_INTEGER,
p_code2 IN PLS_INTEGER,
p_reply OUT VARCHAR2)
RETURN BOOLEAN
IS
v_code1 VARCHAR2(3) := to_char(p_code1);
v_code2 VARCHAR2(3) := to_char(p_code2);
v_msg VARCHAR2(255);
n_line_count PLS_INTEGER := 0;
BEGIN
LOOP
v_msg := UTL_TCP.GET_LINE(p_ctrl_con);
n_line_count := n_line_count + 1;
IF n_line_count = 1
THEN
p_reply := v_msg;
ELSE
p_reply := p_reply || SUBSTR(v_msg,4);
END IF;
EXIT WHEN INSTR(v_msg,'-',1,1) <> 4;
END LOOP;
IF to_number(SUBSTR(p_reply,1,3)) IN(v_code1,v_code2)
THEN
RETURN TRUE;
ELSE
RETURN FALSE;
END IF;
EXCEPTION
WHEN OTHERS
THEN
p_reply := SQLERRM;
RETURN FALSE;
END VALIDATE_REPLY;
** Handles actual data transfer. Responds with status, error message, and
** transfer statistics.
** Potential errors could be with connection or file i/o
PROCEDURE TRANSFER_ASCII(u_ctrl_con IN OUT UTL_TCP.CONNECTION,
p_localpath IN VARCHAR2,
p_filename IN VARCHAR2,
p_pasv_host IN VARCHAR2,
p_pasv_port IN PLS_INTEGER,
p_transfer_mode IN VARCHAR2,
v_status OUT VARCHAR2,
v_error_message OUT VARCHAR2,
n_bytes_transmitted OUT NUMBER,
d_trans_start OUT DATE,
d_trans_end OUT DATE)
IS
u_data_con UTL_TCP.CONNECTION;
u_filehandle UTL_FILE.FILE_TYPE;
v_tsfr_mode VARCHAR2(3) := p_transfer_mode;
v_mode VARCHAR2(1);
v_tsfr_cmd VARCHAR2(10);
v_buffer VARCHAR2(32767);
v_localpath VARCHAR2(255) := p_localpath;
v_filename VARCHAR2(255) := p_filename;
v_host VARCHAR2(20) := p_pasv_host;
n_port PLS_INTEGER := p_pasv_port;
n_bytes NUMBER;
v_msg VARCHAR2(255);
v_reply VARCHAR2(1000);
v_err_status VARCHAR2(20) := 'ERROR';
BEGIN
/** Initialize some of our OUT variables **/
v_status := 'SUCCESS';
v_error_message := ' ';
n_bytes_transmitted := 0;
IF UPPER(v_tsfr_mode) = 'PUT'
THEN
v_mode := 'r';
v_tsfr_cmd := 'STOR ';
ELSIF UPPER(v_tsfr_mode) = 'GET'
THEN
v_mode := 'w';
v_tsfr_cmd := 'RETR ';
END IF;
/** Open data connection on Passive host and port **/
u_data_con := UTL_TCP.OPEN_CONNECTION(v_host,n_port);
/** Open the local file to read and transfer data **/
u_filehandle := UTL_FILE.FOPEN(v_localpath,v_filename,v_mode);
/** Send the STOR command to tell the server we're going to upload a file **/
n_bytes := UTL_TCP.WRITE_LINE(u_ctrl_con,v_tsfr_cmd||v_filename);
IF VALIDATE_REPLY(u_ctrl_con,TSFR_START_CODE1,TSFR_START_CODE2,v_reply) = FALSE
THEN
RAISE ctrl_exception;
END IF;
d_trans_start := SYSDATE;
IF UPPER(v_tsfr_mode) = 'PUT'
THEN
LOOP
BEGIN
UTL_FILE.GET_LINE(u_filehandle,v_buffer);
EXCEPTION
WHEN NO_DATA_FOUND
THEN
EXIT;
END;
n_bytes := UTL_TCP.WRITE_LINE(u_data_con,v_buffer);
n_bytes_transmitted := n_bytes_transmitted + n_bytes;
END LOOP;
ELSIF UPPER(v_tsfr_mode) = 'GET'
THEN
LOOP
BEGIN
v_buffer := UTL_TCP.GET_LINE(u_data_con,TRUE);
/** Sometimes the TCP/IP buffer sends null data **/
/** we only want to receive the actual data **/
IF v_buffer IS NOT NULL
THEN
UTL_FILE.PUT_LINE(u_filehandle,v_buffer);
n_bytes := LENGTH(v_buffer);
n_bytes_transmitted := n_bytes_transmitted + n_bytes;
END IF;
EXCEPTION
WHEN UTL_TCP.END_OF_INPUT
THEN
EXIT;
END;
END LOOP;
END IF;
/** Flush the buffer on the data connection **/
--UTL_TCP.FLUSH(u_data_con);
d_trans_end := SYSDATE;
/** Close the file **/
UTL_FILE.FCLOSE(u_filehandle);
/** Close the Data Connection **/
UTL_TCP.CLOSE_CONNECTION(u_data_con);
/** Verify the transfer succeeded **/
IF VALIDATE_REPLY(u_ctrl_con,TSFR_END_CODE,v_reply) = FALSE
THEN
RAISE ctrl_exception;
END IF;
EXCEPTION
WHEN ctrl_exception
THEN
v_status := v_err_status;
v_error_message := v_reply;
IF UTL_FILE.IS_OPEN(u_filehandle)
THEN
UTL_FILE.FCLOSE(u_filehandle);
END IF;
UTL_TCP.CLOSE_CONNECTION(u_data_con);
WHEN UTL_FILE.invalid_path
THEN
v_status := v_err_status;
v_error_message := 'Directory '||v_localpath||' is not available to UTL_FILE. Check the init.ora file for valid UTL_FILE directories.';
UTL_TCP.CLOSE_CONNECTION(u_data_con);
WHEN UTL_FILE.invalid_operation
THEN
v_status := v_err_status;
IF UPPER(v_tsfr_mode) = 'PUT'
THEN
v_error_message := 'The file '||V_filename||' in the directory '||v_localpath||' could not be opened for reading.';
ELSIF UPPER(v_tsfr_mode) = 'GET'
THEN
v_error_message := 'The file '||V_filename||' in the directory '||v_localpath||' could not be opened for writing.';
END IF;
IF UTL_FILE.IS_OPEN(u_filehandle)
THEN
UTL_FILE.FCLOSE(u_filehandle);
END IF;
UTL_TCP.CLOSE_CONNECTION(u_data_con);
WHEN UTL_FILE.read_error
THEN
v_status := v_err_status;
v_error_message := 'The system encountered an error while trying to read '||v_filename||' in the directory '||v_localpath;
IF UTL_FILE.IS_OPEN(u_filehandle)
THEN
UTL_FILE.FCLOSE(u_filehandle);
END IF;
UTL_TCP.CLOSE_CONNECTION(u_data_con);
WHEN UTL_FILE.write_error
THEN
v_status := v_err_status;
v_error_message := 'The system encountered an error while trying to write to '||v_filename||' in the directory '||v_localpath;
IF UTL_FILE.IS_OPEN(u_filehandle)
THEN
UTL_FILE.FCLOSE(u_filehandle);
END IF;
UTL_TCP.CLOSE_CONNECTION(u_data_con);
WHEN UTL_FILE.internal_error
THEN
v_status := v_err_status;
v_error_message := 'The UTL_FILE package encountered an unexpected internal system error.';
IF UTL_FILE.IS_OPEN(u_filehandle)
THEN
UTL_FILE.FCLOSE(u_filehandle);
END IF;
UTL_TCP.CLOSE_CONNECTION(u_data_con);
WHEN OTHERS
THEN
v_status := v_err_status;
v_error_message := SQLERRM;
IF UTL_FILE.IS_OPEN(u_filehandle)
THEN
UTL_FILE.FCLOSE(u_filehandle);
END IF;
UTL_TCP.CLOSE_CONNECTION(u_data_con);
END TRANSFER_ASCII;
** Handles connection to host and FTP of multiple files
** Files can be any combination of PUT and GET
FUNCTION FTP_MULTIPLE(p_error_msg OUT VARCHAR2,
p_files IN OUT t_ftp_rec,
p_username IN VARCHAR2,
p_password IN VARCHAR2,
p_hostname IN VARCHAR2,
p_port IN PLS_INTEGER DEFAULT 21)
RETURN BOOLEAN
IS
v_username VARCHAR2(30) := p_username;
v_password VARCHAR2(30) := p_password;
v_hostname VARCHAR2(30) := p_hostname;
n_port PLS_INTEGER := p_port;
u_ctrl_con UTL_TCP.CONNECTION;
n_byte_count PLS_INTEGER;
n_first_index NUMBER;
v_msg VARCHAR2(250);
v_reply VARCHAR2(1000);
v_pasv_host VARCHAR2(20);
n_pasv_port NUMBER;
invalid_transfer EXCEPTION;
BEGIN
p_error_msg := 'FTP Successful'; --Assume the overall transfer will succeed
/** Attempt to connect to the host machine **/
u_ctrl_con := UTL_TCP.OPEN_CONNECTION(v_hostname,n_port);
IF VALIDATE_REPLY(u_ctrl_con,CONNECT_CODE,v_reply) = FALSE
THEN
RAISE ctrl_exception;
END IF;
/** Send username **/
n_byte_count := UTL_TCP.WRITE_LINE(u_ctrl_con,'USER '||v_username);
IF VALIDATE_REPLY(u_ctrl_con,USER_CODE,v_reply) = FALSE
THEN
RAISE ctrl_exception;
END IF;
/** Send password **/
n_byte_count := UTL_TCP.WRITE_LINE(u_ctrl_con,'PASS '||v_password);
IF VALIDATE_REPLY(u_ctrl_con,LOGIN_CODE,v_reply) = FALSE
THEN
RAISE ctrl_exception;
END IF;
/** We should be logged in, time to transfer all files **/
FOR i IN p_files.FIRST..p_files.LAST
LOOP
IF p_files.EXISTS(i)
THEN
BEGIN
/** Change to the remotepath directory **/
n_byte_count := UTL_TCP.WRITE_LINE(u_ctrl_con,'CWD '||p_files(i).remotepath);
IF VALIDATE_REPLY(u_ctrl_con,CWD_CODE,v_reply) = FALSE
THEN
RAISE ctrl_exception;
END IF;
/** Switch to IMAGE mode **/
n_byte_count := UTL_TCP.WRITE_LINE(u_ctrl_con,'TYPE I');
IF VALIDATE_REPLY(u_ctrl_con,TYPE_CODE,v_reply) = FALSE
THEN
RAISE ctrl_exception;
END IF;
/** Get a Passive connection to use for data transfer **/
n_byte_count := UTL_TCP.WRITE_LINE(u_ctrl_con,'PASV');
IF VALIDATE_REPLY(u_ctrl_con,PASV_CODE,v_reply) = FALSE
THEN
RAISE ctrl_exception;
END IF;
CREATE_PASV(SUBSTR(v_reply,INSTR(v_reply,'(',1,1)+1,INSTR(v_reply,')',1,1)-INSTR(v_reply,'(',1,1)-1),v_pasv_host,n_pasv_port);
/** Transfer Data **/
IF UPPER(p_files(i).transfer_mode) = 'PUT'
THEN
TRANSFER_ASCII(u_ctrl_con,
p_files(i).localpath,
p_files(i).filename,
v_pasv_host,
n_pasv_port,
p_files(i).transfer_mode,
p_files(i).status,
p_files(i).error_message,
p_files(i).bytes_transmitted,
p_files(i).trans_start,
p_files(i).trans_end);
ELSIF UPPER(p_files(i).transfer_mode) = 'GET'
THEN
TRANSFER_ASCII(u_ctrl_con,
p_files(i).localpath,
p_files(i).filename,
v_pasv_host,
n_pasv_port,
p_files(i).transfer_mode,
p_files(i).status,
p_files(i).error_message,
p_files(i).bytes_transmitted,
p_files(i).trans_start,
p_files(i).trans_end);
ELSE
RAISE invalid_transfer; -- Raise an exception here
END IF;
EXCEPTION
WHEN ctrl_exception
THEN
p_files(i).status := 'ERROR';
p_files(i).error_message := v_reply;
WHEN invalid_transfer
THEN
p_files(i).status := 'ERROR';
p_files(i).error_message := 'Invalid transfer method. Use PUT or GET.';
END;
END IF;
END LOOP;
/** Send QUIT command **/
n_byte_count := UTL_TCP.WRITE_LINE(u_ctrl_con,'QUIT');
/** Don't need to validate QUIT, just close the connection **/
UTL_TCP.CLOSE_CONNECTION(u_ctrl_con);
RETURN TRUE;
EXCEPTION
WHEN ctrl_exception
THEN
p_error_msg := v_reply;
UTL_TCP.CLOSE_ALL_CONNECTIONS;
RETURN FALSE;
WHEN OTHERS
THEN
p_error_msg := SQLERRM;
UTL_TCP.CLOSE_ALL_CONNECTIONS;
RETURN FALSE;
END FTP_MULTIPLE;
** Convenience function for single-file PUT
** Formats file information for FTP_MULTIPLE function and calls it.
FUNCTION PUT(p_localpath IN VARCHAR2,
p_filename IN VARCHAR2,
p_remotepath IN VARCHAR2,
p_username IN VARCHAR2,
p_password IN VARCHAR2,
p_hostname IN VARCHAR2,
v_status OUT VARCHAR2,
v_error_message OUT VARCHAR2,
n_bytes_transmitted OUT NUMBER,
d_trans_start OUT DATE,
d_trans_end OUT DATE,
p_port IN PLS_INTEGER DEFAULT 21,
p_filetype IN VARCHAR2 := 'ASCII')
RETURN BOOLEAN
IS
t_files t_ftp_rec;
v_username VARCHAR2(30) := p_username;
v_password VARCHAR2(50) := p_password;
v_hostname VARCHAR2(100) := p_hostname;
n_port PLS_INTEGER := p_port;
v_err_msg VARCHAR2(255);
b_ftp BOOLEAN;
BEGIN
t_files(1).localpath := p_localpath;
t_files(1).filename := p_filename;
t_files(1).remotepath := p_remotepath;
t_files(1).filetype := p_filetype;
t_files(1).transfer_mode := 'PUT';
b_ftp := FTP_MULTIPLE(v_err_msg,
t_files,
v_username,
v_password,
v_hostname,
n_port);
IF b_ftp = FALSE
THEN
v_status := 'ERROR';
v_error_message := v_err_msg;
RETURN FALSE;
ELSIF b_ftp = TRUE
THEN
v_status := t_files(1).status;
v_error_message := t_files(1).error_message;
n_bytes_transmitted := t_files(1).bytes_transmitted;
d_trans_start := t_files(1).trans_start;
d_trans_end := t_files(1).trans_end;
RETURN TRUE;
END IF;
EXCEPTION
WHEN OTHERS
THEN
v_status := 'ERROR';
v_error_message := SQLERRM;
RETURN FALSE;
--DBMS_OUTPUT.PUT_LINE(SQLERRM);
END PUT;
** Convenience function for single-file GET
** Formats file information for FTP_MULTIPLE function and calls it.
FUNCTION GET(p_localpath IN VARCHAR2,
p_filename IN VARCHAR2,
p_remotepath IN VARCHAR2,
p_username IN VARCHAR2,
p_password IN VARCHAR2,
p_hostname IN VARCHAR2,
v_status OUT VARCHAR2,
v_error_message OUT VARCHAR2,
n_bytes_transmitted OUT NUMBER,
d_trans_start OUT DATE,
d_trans_end OUT DATE,
p_port IN PLS_INTEGER DEFAULT 21,
p_filetype IN VARCHAR2 := 'ASCII')
RETURN BOOLEAN
IS
t_files t_ftp_rec;
v_username VARCHAR2(30) := p_username;
v_password VARCHAR2(50) := p_password;
v_hostname VARCHAR2(100) := p_hostname;
n_port PLS_INTEGER := p_port;
v_err_msg VARCHAR2(255);
b_ftp BOOLEAN;
BEGIN
t_files(1).localpath := p_localpath;
t_files(1).filename := p_filename;
t_files(1).remotepath := p_remotepath;
t_files(1).filetype := p_filetype;
t_files(1).transfer_mode := 'GET';
b_ftp := FTP_MULTIPLE(v_err_msg,
t_files,
v_username,
v_password,
v_hostname,
n_port);
IF b_ftp = FALSE
THEN
v_status := 'ERROR';
v_error_message := v_err_msg;
RETURN FALSE;
ELSIF b_ftp = TRUE
THEN
v_status := t_files(1).status;
v_error_message := t_files(1).error_message;
n_bytes_transmitted := t_files(1).bytes_transmitted;
d_trans_start := t_files(1).trans_start;
d_trans_end := t_files(1).trans_end;
RETURN TRUE;
END IF;
EXCEPTION
WHEN OTHERS
THEN
v_status := 'ERROR';
v_error_message := SQLERRM;
RETURN FALSE;
--DBMS_OUTPUT.PUT_LINE(SQLERRM);
END GET;
END BRNC_FTP_PKG;
/ -
Write records to a Flat file & Ftp to a remote server
I know this would be a basic question for most of the ppl in this forum, but I am stuck in here.
There is a "Orders" table, and when new orders are made , I need to build a file with relevant information(extracted from tables) and FTP to a remote server.There should be a SQL job that would run for every 30 mins to see if there are any new orders made , and if so, Write them to a file and FTP back to a remote server.
The orders that were written to a file previously shouldn't appear when new files are created.
How can this be done..?
Thanks in advance..You'd need 3 basic components here
1) Something to identify new orders
2) Something to write whatever data you want to a flat file
3) Something to FTP that file
#2 is going to be the UTL_FILE package
#3 is going to require a third-party PL/SQL (or Java) FTP library. If you do a Google search on UTL_FTP, you'll find a few such PL/SQL packages or you can download an appropriate Java class and load that into the database.
#1 can be as simple as a Status column that gets set to NEW initially and PROCESSED when the file is generated. Or it could get a lot more complicated with something like Streams capturing changes to the table and sending those change records to a separate consumer process that would then generate the file and FTP it.
Justin -
Data Transfer Port ranges in FTPS with SSL in File Adapter
Hi,
I would appreciate if you could give me pointers reagrding the below issue.
We are on XI 3.0.
For one interface, I have to configure the FTP File adapter to pick up the files from external server.
The connection is secure and should be FTPS with SSL.
I have the certificate from the 3rd party and have it installed on our XI development server.
The change has been made in our firewall to allow the connection to the host IP and port 21 which is configured at the target party as Explicit FTPS port and they have allowed access to our Server IP in their firewall.
I have configured other FTPS connections and they worked fine but this is the only one that has been giving me so much trouble.
The error i get today is:
Error occurred while connecting to the FTP server "60.234.48.106:21": java.net.SocketException: Connection reset
Yesterday, i got the below error:
Error occurred while connecting to the FTP server "60.234.48.106:21": iaik.security.ssl.SSLException: Server certificate rejected by ChainVerifier
The Vendor has suggested to get the firewall ports 21 and 28000:30000 (data transfer) to be opened.
He has also provided with the certificate passphrase additionally to the user name and password needed to make the connection.
When i tried the connection from the XI development to the vendor server, via the Telnet, it looked like it worked.
Please advice.
Regards,
Archana>
Archana Singhai wrote:
> Hi,
> I would appreciate if you could give me pointers reagrding the below issue.
> We are on XI 3.0.
> For one interface, I have to configure the FTP File adapter to pick up the files from external server.
> The connection is secure and should be FTPS with SSL.
> I have the certificate from the 3rd party and have it installed on our XI development server.
> The change has been made in our firewall to allow the connection to the host IP and port 21 which is configured at the target party as Explicit FTPS port and they have allowed access to our Server IP in their firewall.
> I have configured other FTPS connections and they worked fine but this is the only one that has been giving me so much trouble.
> The error i get today is:
> Error occurred while connecting to the FTP server "60.234.48.106:21": java.net.SocketException: Connection reset
> Yesterday, i got the below error:
> Error occurred while connecting to the FTP server "60.234.48.106:21": iaik.security.ssl.SSLException: Server certificate rejected by ChainVerifier
> The Vendor has suggested to get the firewall ports 21 and 28000:30000 (data transfer) to be opened.
> He has also provided with the certificate passphrase additionally to the user name and password needed to make the connection.
> When i tried the connection from the XI development to the vendor server, via the Telnet, it looked like it worked.
> Please advice.
> Regards,
> Archana
1. Open the port ranges. FTPS usually requires you to open ports in the range of 65024 through 65535 for Passive FTP data
connections
2. Use the CA name in the certificate. it should be same as of the host name of the FTPS server -
Integrating FTP with JDeveloper
Can anyone help me with integrating FTP with JDeveloper (10.1.3)
I am developing jsp pages for a web site. the website runs on a Sun Solaris UNIX server.
At present i develop my jsp pages in JDeveloper and save then to a file on my PC. I then have to use an external tool (Ultraedit) to FTP them to my webserver for testing.
I have seen in this forum that there is something called 'ant' which will allow you to FTP direct from JDeveloper. I know zero about 'ant' and after spending a couple of hours trawling arround the web i'm still no wiser.
Can someone give me a hands held, idiot friendly explanation of what i have to do to integrate FTP?
johnHere is a basic explanation of the FTP task in ANT.
You can just create a new Ant build file in your project, add this task with the correct parameters and then right-click run on the build file.
Another options is to use JDeveloper to create standard WAR file for deployment and then passing it to the server to deploy. -
Ftp connection in oracle server
dear all,
i need some ideas...
Fact: We have an application made by programmers. This app enter a lot of external users through internet browsers. Now the application will have to upload PDF files and save into a directory. This files will be read with UTL_FILE in order to identify the file name.
We were thinking that we have to open an ftp connection (in oracle server) through this application in order to save the pdf files into directory (another server) but this directory will have to connect through NFS to my oracle server.
I think that this could be a potential risk in my oracle server if i open ftp...
can you give me some ideas o antoher ways in order to do that i want ???
Thanks a lotNo version number.
No operating system.
No hardware platform.
No DDL.
Uploading PDF files from the client to the database server?
Uploading PDF files from the database server to another server in the data center?
Uploading to the file system?
Uploading to a BLOB?
What you are doing is totally unclear. But what is most unclear is why you chose to post this in a group named "Database Upgrade." What does this have to do with upgrading? -
Could not able to execute FTP commands in windows server machines 2012/ windows server 2008.
Could not able to execute FTP commands in windows server machines 2012/ windows server 2008.
From windows server 2012 and windows server 2008, Opened port 20,21,22 in firewall bidirectionally. After Establishing connection by passing credentials 230 log in successful.
ftp commands executing getting as " 425 Use Port or PASV first" , "500 Illegal PORT command".
But I could able to do windows client machines like windows 7 and windows 8 with same environment
Note : Firewall ports are opened. have tested by making firewall down to avoid filters.
Pandiyan MuthuramanHi Pandiyan Muthuraman,
Did you mean even you disable or open the related port the FTP issue still exist? I found this errors most time occur when we use the ISA firewall and the FTP configured passive
mode, if you have ISA firewall please refer the following KB to fix this issue.
How to enable passive CERN FTP connections through ISA Server 2000, 2004, or 2006
http://support.microsoft.com/kb/300641
The have a specific form for the IIS question, if you have the further IIS related question you can ask in IIS forum.
IIS support forum
http://forums.iis.net/
Thanks for your understanding and support
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Hello
I search some where with know how about a ftps connection to gxs (http://www.gxs.com/) with sap ftps adapter. I want send gxs with the adapter a
edi messages.
In the ws-ftp client i need a script with the command cd edi(receiver id).
Have somebody a connection to gxs with xi ftps or a other protocol. (HTTPS , SOAP, ...)
Thank you for response
Regards TomHi Dimitri,
thanks for your reply!
Yesterday we were in contact with the GXS hotline. They asked us to install CoreFTP Pro and we did the following configuration:
This configuration works but I have absolutely no idea how to put this configuration 1:1 to our PI system. (e.g. connection "FTPS (ssl direct)" and server type "GXS").
Do you have an idea how to implement it?
Thank you very much!
Regards
Christian -
Dreamweaver CS 5.5 not working with Godaddy FTP with TLS/SSL
I've upgraded to CS 5.5 and tried to connect to a client's Godaddy account with FTP with TLS/SSL it fails. Works perfectly with my mac app Transmit every time as it always has. It doesn't work with implicit or explicit settings with authentication set to none or otherwise.
Can someone please let me know if Dreamweaver will ever be compatible with FTP with TLS/SSL and Godaddy? Or is there some setting I can try that will make it work now somehow?
Been waiting years for this....SnakEyez02 wrote:
First, that's a Godaddy problem if their security isn't up to par.
That may be the case that Godaddy is also at fault, but every other FTP app I use with Godaddy works fine. It's just Dreamweaver and has always been just Dreamweaver not working with a secure connection to Godaddy. Considering Godaddy is the largest webhost in the USA, you'd think Adobe would have fixed this years ago. I should also mention I'm not endorsing Godaddy and I understand there's plenty of people that don't like Godaddy for very good reasons.
Sent you PM with FTP account with Godaddy yesterday. Thank you for taking a look!
UPDATE: Whoops, I see you responded via private message already. I'll paste most of it here in hopes it helps others to understand the issue:
via SnakEyez02 PM:
Ok this took a lot of digging. I won't say it's not a DW issue 100% and I will report a bug for your problem, but DW is not the problem alone Godaddy needs to share the blame here for a bad certificate. Here is what is happening:
I'll start with DW:
- The settings are correct that were in the post. Port 21, FTP explicit, and the authentication should be set to None (encyprtion only). This is where the transmission is encrypted using SSL, but the certificate is shared and not specific to the domain owner. That is the difference between DW's "none" and "trusted". It's a poor choice of words I'll give them that. However, Godaddy seems to want all connections to be trusted thus the other error you get when you turn on the None option. Now could DW do what Transmit does, warn you and write in an unsigned certificate into the Keychain app, probably, is it best practice for security reasons to "Trust" an unsigned certificate probably not.
Now Transmit:
- As explained above Transmit opens up a prompt to override and create a fake-trusted signed certificate. Thus by forcing the OS to think a legitimate certificate is there it gets you through albeit through unconventional methods.
The problem:
- A good portion of this problem lies with Godaddy. Now I use a shared hosting account and set one up on an independant host for a friend of mine and both of them accept the shared certificates (SSL explicit). The difference is the hostname of the certificate. I ran a traceroute (from Network Utility in Utilities folder) on your website and came up with the following address: 173.201.23x.x.
The problem is that the certificate on your server is actually not for that server which is the reason DW seems to have such an issue with it. The SSL certificate that Godaddy put on your shared server is for host - 173.201.19x.5x. As you can see, it's a certificate for another server. Honestly the fact that Panic's Transmit allows this override scares me a little bit and the fact that Godaddy never noticed this issue either scares me to. So while DW could write in a bad certificate I can see why this is happening.
I know there is not much solice in my answer because it still doesn't alleviate the problem that you have with DW connecting. Unfortunately I do not have a workaround despite my numerous attempts to try and gain access over a secure connection. One alternative you could ask Godaddy for in the meantime is an SSH connection which would allow you to use SFTP instead of FTPS. But that's a short-term solution to a long-term problem.
If you think of anything else feel free to bounce any ideas off me I don't mind. Good luck in getting this solved and I will post a bug report to make Adobe aware of the issue.
Thank you for looking into this issue in depth like you have!
I think the issue might be that Godaddy is applying cost saving measures to keep their prices down in the way they implement their certificates (but it also wouldn't surprise me to know it's simply ineptitude on Godaddy's part either). I'm not sure I fault Panic with Transmit much at all because it clearly warns you about the certificate and it's your choice to continue. And, as it stands now, it's much safer to continue to connect that way with Transmit than to stop and connect with no encryption at all at a public hotspot.
As it stands now, you really shouldn't connect to Godaddy with Dreamweaver at a public hotspot unless you set up an SSH tunnel with your connection first. But enabling SSH is an added expense in many ways including paying for the service, using more computer resources for tunneling and time setting it up and implementation... all because Dreamweaver won't just allow developers the option like Transmit does.
Once again, thank you for looking at this and I hope someone at Adobe finally address this issue for the security of its customers who use Godaddy (which is often not their choice and was, instead, the choice of their clients to use Godaddy as a webhost).
Just a side note, I contacted Godaddy support about this several years ago and they were unresponsive and even hostile about it - So that's definitely another vote against Godaddy from me as well.
Message was edited by: greenbluewave -
FTP Access on OSX Server via a browser
I have a number of ftp clients set up which can succesfully upload/download files using ftp client software (Fetch/Easy FTP).
I have a windows user who wants to upload his stuff via ftp in his web browser (IE presumably).
Not had any success (Guest access is disabled) with his account settings in browser though I can get in using same settings in ftp client.
Is this possible with the built in ftp element of OSX Server without having to install something like Rumpus?IE is the only browser I know of that supports FTP upload via the web browser window. Most Mac browsers that I'm aware of simply pass the FTP connection off to the Finder to deal with.
The Finder, of course, doesn't support FTP upload.
So unless your clients are comfortable working in the command line, you're going to need some additional software. That software could be as simple as an AppleScript application that performs the upload, but you're going to need something.
Maybe you are looking for
-
How to create a Z Function Module
Hi, I am trying to create a Z function module in BI 7.0 that i can use in Transformations. SE37> Name of FM.Create..> It is prompting me to enter Function Group. What is Function Group and How can i create a new function group (Detail Steps please)
-
[SOLVED] Virtual Box Installation - vboxdrv setup
Hello, second day on Arch here and learning as much as I can but can't seem to get VirtualBox up and running. I am following the guide found here: https://wiki.archlinux.org/index.php/VirtualBox So far I have run pacman -S virtualbox-ose gpasswd -a
-
Generating sales order and reserve invoice in a row
Hi all, i'm using B1iSN PL14 with sap B1 8.8. I need to build the following scenario : I receive an xml file representing a sales order, i have to create : - a sales order - a reserve invoice based on the sales order I've create two BIUs that current
-
Hello, I have an excel list with some columns. I changed the name of some of the column. When I export this list to excel, I always get the first column name, which was created by the creation of the column, and not the new one. Is there some possibi
-
"sent" mail doesn't show up, missing reply emails, sudden "deleted" emails
I have been hving some problems with Mail recently, three issues have become major Pains in the ***: 1. Just about every 3 or 4 emails that I send from my .mac account seem to go through but a copy or receipt of them don't show up in the "sent" mail