FTP works in site Mgr but won't upload DW8 Mac

Hi,
I've just read through several pages of ftp-related posts and
have not found the exact problem I'm having. Nothing has changed
recently on my Mac, but Dreamweaver will not connect to the host to
upload files. The "test" in the Sites dialog box works fine, but I
am getting an error when I try to upload through any method: save
to remote server, preview in browser, "put"--nothing works and I
get this message:
An FTP error occurred. Cannot make connection the the host.
Your login or password is incorrect. Please check your connection
information.
The FTP log shows:
< 220 Microsoft FTP Service
> USER imfcus
< 331 Password required for imfcus.
> PASS
< 230 User imfcus logged in.
> PWD
< 257 "/IMFCUS" is current directory.
> PWD
< 257 "/IMFCUS" is current directory.
> CWD /
< 250 CWD command successful.
> PWD
< 257 "/" is current directory.
> CWD /
< 250 CWD command successful.
> PASV
< 227 Entering Passive Mode (64,202,189,113,4,109).
> TYPE A
< 200 Type set to A.
> LIST
< 125 Data connection already open; Transfer starting.
< 226 Transfer complete.
> QUIT
< 221
> CWD /
after two attempts.
Since everything works in the test and also in Fetch, I am
stumped. I have updated to 8.2, but only after the problem began.
I'd appreciate any help.
Thanks!

First make sure the passive FTP box is checked in your FTP
settings. If it is and this problem exists, continue below to trash
the preferences file:
What you will need to do is go into your user account, then
into the Library folder and then into the Preferences folder. Do a
quick search (because there are so many files) for dreamweaver and
you should find a .plist file. Delete that.
The next time you start up DW it may take a little longer
than normal because OS X will have to build a new preferences file.
Then try again and see if that solves the problem.

Similar Messages

  • My canon 5320 has ink but won't print on mac os 10.7.5

    my canon 5320 has ink but won't print on mac os 10.7.5

    Hi olschoolmike_1,
    To try and resolve the issue, you will want to confirm that the inkjet nozzles are dispensing the ink correctly by printing a nozzle check pattern from the printer.  If the pattern does not print correctly, we recommend performing at least one cleaning and two deep cleanings on the printer to try and get the ink to print..  To print the nozzle check pattern and perform the cleanings, please follow the steps located here.  If you still experience difficulty after performing the cleanings, please call or email us using one of the methods on the Contact Us page for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Printer connected, printer works, but won't print from Mac

    I'm helping someone with a printer problem, and I have a mystery on my hands.
    The printer is connected (directly), shows up in the printer list, can print a test page, but won't print any document from this computer (it's fine from my laptop).
    It's a Mid-2011 Mini, 2.3Ghz, running 10.7.5. The printer is an Epson WF-2540.
    This is a USB printer, connected directly to their Mac.
    In "Settings", when you select Print/FAX and print a "Test Page" - Success! This is a process that invokes the Epson Driver directly [and bypasses the MAC print queuing mechanism]
    When "Printing" from within any application (firefox, TextEdit, winders...)   The job starts to queue, but errors before engaging the printer.
    R & R the Epson Drivers,  Clear the Printer "stuff" on the Mac, Reinstall drivers from the Epson website, Mac wants to update the "newest" Epson Drivers (kinda' funny when I think about it...).
    Still errors.
    I attached directly to a USB port on my MacBook Pro.  Download drivers, etc..  Works like a champ!
    We have deleted the printer from System Prefs, rebooted, and added it back.
    We have even gone into Terminal and...
    sudo bash
    cd /etc/cups/ppd
    ls
    found EPSON_WF_2540_Series.ppd
    cp * /var/tmp/
    ls /var/tmp/*.ppd
    rm /etc/cups/ppd/*
    Still doesn't work.
    Anybody have any suggestions?

    Hi, it's not clear... did you Rest the Printing system on the Mac?
    10.5/10.6/10.7/10.8 instructions...
    In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
    if you hold option and click the "-" tab it resets the printing system.
    http://www.macosxhints.com/article.php?story=20031215144430486
    Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
    Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
    Resetting the printing system in Mac OS X 10.5.x+++
        1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
        2.    Choose System Preferences from the Apple menu.
        3.    Choose Print & Fax from the View menu.
        4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..." 
   
  As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
    http://support.apple.com/kb/ht1341
    Reboot.

  • Apple TV2 airplay audio (via Airport Express) works well with music, but won't work with any video.

    I have an ATV2 and Airport Express connected to speakers all connected to the same network. It all works with music, but won't work with any video audio. In my ATV's settings I've selected my AirPort Express speakers. It works for music, why not everything else? Is there a fix or work around?

    Netflix is first on that list...What I mean is, if there is a feature that allows for a wireless audio connection to the Apple TV, why wouldn't the developer allow it. To keep me from enjoying a more convient connection? I can have the same listening experience on a wired connection...

  • Streaming Audio Works Fine...But Won't Stream Video

    Just bought an ATV2 earlier today, and I'm experiencing an odd problem: I can stream audio but not video.
    My Mac desktop computer is in a different room from my ATV2 and TV setup. I downloaded the Remote App onto my iPhone, turned on Home Sharing, and things work fine for the most part. When I use the Remote App to stream music and audio podcasts to my TV, I have no problem. But when I try to stream video from iTunes (including movies, music videos, and TV shows I purchased in iTunes on the computer) the videos start playing on the computer instead of the TV.
    In other words, the Remote App on my iPhone seems to be controlling the ATV2 for audio content, but it's controlling the computer for video content.
    All my video content in iTunes is in the .MP4 format. Can't figure out what step or setting I might be missing.
    Any thoughts on this?
    Thanks!
    Eric

    Solved the issue by upgrading to iTunes 10.

  • Streaming radio works in Test Movie but won't work in browser

    Hi all,
    I've built a simple radio interface that has only Play, Stop and volume adjuster controls.
    Play button starts an online stream:
    play_btn.onRelease = function () {
         stream= new Sound();
         stream.loadSound("http://radio.xyz.org:9050", true);
         stream.start(0, 50);
    When I test movie inside the Flash Pro, i see that it is fully functional.
    Running the swf on the local with Flash Player works perfect also.
    But after uploading to server, I can hear no sound at all.
    I've set "allowScriptAccess" to "always", but it didn't help: ( http://www.erkanbeyaz.com/radyo )
    Briefly, the local swf works but the remote one doesn't. And I'm sure this is not a path issue.
    I  guess this is a flash (and/or browser) security issue and could be  overcome by setting the appropriate parameters within the Publish  Settings.
    But how?
    Any help would greatly be appreciated.
    Best.

    Hi Atul,
    I have checked my bindings but the only values the method needs, is the releasecode (which is filled) and the object BUS2012 (which is also filled). The method gives back the exception 1006  responsibility_fail. I have checked the FM BAPI_PO_RELEASE and I even have made sure that the containerelement UseExceptions is marked with X (should be done by the program itself).
    What I also see when I generate my testworkflow is the message Indicator "Results Parameter" missing in BOR method RELEASE, but I cannot find out what I need to do to make sure I have this Results Parameter.
    Hope you can help me further!
    Best regards,
    Monique

  • I have made an iphoto book but when I try to purchase it, it compiles the  book but won't upload. Please help., I have made an iphoto book but when I try to purchase it, it compiles the  book but won't upload. Please help.

    I have made an iphoto book.When I tries to purchase it, it compiled but would not upload the book. Please help

    Boot into Safe Mode and try again.

  • HT204032 Powernap works for timemachine backups but NOT for Find My Mac. Mid 2011 mba. osx 10.8.2. Anyone else have this problem?

    Hi,
    I'm looking for a solution to this issue. Console shows that mba wakes up for timemachine backups but when firing Find My Mac on iPhone or iMac, it does not succeed in locating my mba and it is listed as offline.
    How to solve this?
    Cheers
    Kris

    http://support.apple.com/kb/HT5394
    This states that you need to do an smc reset for full powernap functionality. It could be effecting it if it was an older macbook air that you updated to mountain lion?
    Ryan

  • IMAC will work with 3GB RAM but won't boot with $GB RAM

    I have a 20inch iMAC and it came with 1 GB RAM. I received 4 GB of RAM and did the upgrade. But I found that unless I had the original 1 GB RAM in either slot, the computer would turn on the fan, but never the screen and it would never boot. If I put the original 1 GB RAM in one slot and one of the new 2 GB RAM in another slot, it would come up and recognize 3 GB of RAM. I tried out both my 2 GB RAM and they both worked (to rule out bad RAM). But once I had both 2 GB RAM in the computer I run into trouble. This computer supports 4 GB of RAM according to the book and the new RAM says it is the right kind (Kingston 4 GB kit PC2-6400 for 800/667/533 MHz. I need the 667, so I should be good to go. Can you replace the original 1 GB or does that original RAM have something to allow the computer to boot? I have the latest MAC OS X updates....

    Okay I did get around this and got my iMAC working. It cost me an extra $92 dollars, but it was still cheaper than buying the 4 GB from the APPLE store.
    I exchanged my 800 MHZ backward compatible to 667 MHZ Kingston 4 GB kit for a PNY 4 GB kit that is meant for 667 MHZ and not just backward compatible.
    http://www.bestbuy.com/site/olspage.jsp?skuId=8725427&st=memory&lp=3&type=produc t&cp=1&id=1201306785090
    I installed this and my computer came right up and says it has 4 GB of memory when I do the Apple->About this computer. It seems to work fine now.

  • HTMLResources works when tested local but won't work when the folio is uploaded

    hi there,
    creating a DPS app with on the cover, inside a popup, a button that calls a pdf in the HTMLResources.zip
    Button's function
    HTMLResources/cover/filename.pdf
    filename.pdf sits in the folder 'cover' inside the HTMLResources folder before zipping.
    This works when I test it local, and it has worked online some days ago in a previous release of the folio.
    But since this morning I always get this error:
    "The requested url was not found an this server." (-1100)
    I've checked everything twice and the online Folio Producer tells the HTMLResources.zip is uploaded
    Any ideas what could be wrong ? How to solve this ?
    Thanx in advance,
    Herman Belgy

    -> [[Troubleshooting extensions and themes]]
    Check and tell if its working.
    Not related to your problem but your plugins needs to be updated.
    -> Your Flash plugin is quite older. You need to update it.
    * Adobe Flash Player 11.0.1.152 (3.59 MB)
    * http://get.adobe.com/flashplayer/
    -> Your Java plugin is quite older. You need to update it.
    * Java Version 6 Update 29
    * http://java.com/en/download/index.jsp
    * [[Using the Java plugin with Firefox]]
    -> Update All your Firefox Plugins
    * https://www-dev.allizom.org/en-US/plugincheck/
    * http://www.mozilla.com/en-US/plugincheck/
    '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''

  • Application worked under Adminstrator account but won't work under standard

    I wanted to setup the Toontown Launcher application for my son under his "standard user" account. But the application only works when I log in as an administrator, it won't work when my son log in as a standard user. It said "Cannot run application from this location. Copy app to desktop." I tried to copy it to desktop but it still won't work with same error message. FYI, I did not turn on Parent Control for the standard user account. Anybody knows why? I'm new to Mac and am pulling my hair out trying to fix this!!! Thanks for reading.

    Most apps for a Mac are just drag & drop, although some require installers. Those that do usually have uninstallers. I've never used a 3rd-party uninstaller in 25 years of using Macs, so can't comment on them. However, since you're new to the Mac world, pause a moment and get up to speed before going down the road any further. See these:
    Switching from Windows to Mac OS X,
    Basic Tutorials on using a Mac,
    Mac 101: Mac Essentials,
    Anatomy of a Mac,
    MacFixIt Tutorials,
    MacTips, and
    Switching to the Mac: The Missing Manual, Snow Leopard Edition.
    Additionally, *Texas Mac Man* recommends:
    Quick Assist.
    Welcome to the Switch To A Mac Guides,
    Take Control E-books, and
    A guide for switching to a Mac.

  • HELP PLEASE**Curve Fell In Toilet. Dried It Out & Worked Ok 1st Try But Won't On A Second Time.

    Ok my curve fell into the toilet, i quickly grabbed it out nd took out batt ns sim. let it air dry for maybe 2 hours til i got home and was able to put it in uncooked rice. let it be for a day then put batt back in without SIM. it loaded up good nd seemed fine, so i decided to turn it off so i could put in my SIM. but when i put in the SIM then batt, no red LED light showed and phone wouldn't turn on? PLEASE HELP ME. IM DESPERATE! Should i let it dry out a few more days and try again? Has Anyone ever done that? Is my phone completely lost? or any way possibleto have it fixed?

    Well, you did good up until the part of replacing the battery after only one night in the dry uncooked rice.
    If it was immersed completely, you're going to need 3-5 days of drying if it is not already damaged too much from trying it after the first night.
    Wet BlackBerrys are easily dried out. but patience is the key.
    1. Remove the battery immediately!! Do not attempt to turn on your BlackBerry.
    2. Let the device dry in a warm, dry place for 3 to 5 days* (see below)
    3. DO NOT "check it each day" by placing the battery in. Leave it be to dry completely. This takes time. Replacing the battery to check it can only damage it more (moisture + electrical current = disaster).
    4. If the device is warm after the drying period, allow it to cool to room temperature before placing the battery back in.
    Suggestions on drying your BlackBerry in a warm place (open, with the battery out):
    *Place the BB in a container of dry UNcooked rice, and then you might also place it in any of the locations mentioned below.
    *On top of any dry heat emitting electronic component: TV cabinet or CRT, LCD, cable TV/Satellite converter box or plasma monitor
    *On the dashboard of your car on a sunny day
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Slingbox working with Airport Express but now Back To My Mac broken

    I had Back To My Mac working a couple of months ago. I have a Mac Mini connected to a Time Capsule on my Roadrunner cable modem network, and I had a Slingbox Pro (SBP) connected to my DSL Airport Extreme(n) network. I carry a MacBook Air with me on trips.
    I wanted to move the DSL Airport Extreme to another room and needed an ethernet connection for the Slingbox, so I bought the Airport Express, plugged it in, and configured it to extend the Roadrunner network. I plugged the SBP into the Airport Express and configured the AE for port forwarding. So my two networks look like this:
    Roadrunner ---> Time Capsule ---> Mini (via ethernet), and
    Roadrunner ---> Time Capsule ---> Airport Express(n) (wirelessly) ---> SBP (ethernet)
    DSL ----> Airport Extreme ----> wireless network 2
    Now when the MBA is configured on the Roadrunner wireless network I can see and access the Mini. When I change networks, either using my own DSL network or out of town on a hotel network, the computers cannot see each other and BTMM will not work. Does anyone have any ideas on how I can configure either computer or the network components to get this working again? Thanks. I will also post this in the .Mac forum.

    The Slingbox Pro connection works because Slingbox has its own system for keeping track of the WAN IP address of the Time Capsule.
    Unless your Time Capsule has an assigned static WAN IP address, you need to set up your own system to do this for the purpose of file sharing from the MBA to the Mac mini from the DSL network or from the Internet. You can use a DNS hosting service such as DynDNS for this purpose. See: http://www.dyndns.com/
    You can set up a free account with DynDNS and install client software on your Mac mini that notifies the DynDNS server whenever the WAN IP address on your Time Capsule changes. You assign a static LAN IP address to the Mac mini and forward UDP and TCP port 548 from the Time Capsule to the LAN IP address of the Mac mini.
    When you want to file share to the Mac mini, you can use the Connect to Server... function in the Finder using this address (as an example):
    afp://xxx.dyndns.info
    The DynDNS server converts the "xxx.dyndns.info" placeholder to the current WAN IP address of your Time Capsule, and you end up connecting to the Mac mini—either from the other network or from the Internet.
    You also may be able to use the Back to My Mac function with a .Mac account, but I am unfamiliar with it and have never tried to use it.

  • EOS 6D-images won't upload to MAC. Error reads file unrecognizable format.

    This is my third Canon EOS camera on the same MAC OS x 10.6.8 desktop.  Have not experienced any trouble uploading images into iPhoto before.  My new camera is a 6D.  I formatted the memory card in the camera.  I even thought it was a bad card & bought a new one, only to receive the same error.  The error says the file is in an unrecognizable format.  It is only images taken on the 6D.  I tried importing directly from the camera via a usb cord & by using a card reader.  I was successfully able to upload images from my 5D Mark III.  Any ideas why I can't import the images from the 6D?
    Thanks!

    The 6D is newer, so make sure your software is up to date. Check this list: http://support.apple.com/kb/HT4757
    Weekend Travelers Blog | Eastern Sierra Fall Color Guide

  • Can't FLIP a quick RENDER! Works fine in SHAKE but not to flip or Disk!

    Learning with Lynda.com!
    Part 1 has you rendering two files, one is a still image, the other a quicktime movie, I don't have the money for premium so I got my own clouds movie (.mov) and added a still plane.
    I key framed 1 - 100 and playing it back its fine in shake, but not on FLIP or DISK, its nothing but a still image. Have done it 5 times making sure that all the right buttons are on, or not, and as I said, it works INSIDE of shake but won't RENDER to FLIPBOOK!
    I don't suppose anyone wants to send me the exercise files? (on knees begging LOL) I am a member, just can't afford $300 for one pop and this is really the only program I need to learn.
    Thanks!

    Sorry if I'm pointing out something obvious that you already know. Have you checked the time range in the render dialog? Shake does not fill in the values for you automatically, and defaults to "1" so only renders the 1st frame. It needs to be set to eg "1-100".

Maybe you are looking for