FTP x64 Install - Error at Selecting Packages

After I begin the 2nd step from the main menu, to select the packages, I get to choose a server, but after doing so it just shows me a message saying something about "refreshing" before it quickly closes and returns me back to the main menu again. I then press select packages again and get to select the server again, after which the checklist appears (that would normally display the packages to select), but instead of the names of the packages, it just says "Error: ^" on the first line and "Expected ^" on the second. If I try again it just adds another pair of "Error: ^" and "Expected ^" on the third and fourth line and so on as I keep trying (If I select cancel the lines are cleared).
Edit: btw, this is what the "Select Package Categories" checklist looked like after the first try
[*] Error: ^
[*] Expected ^
[*] at ^
[*] least ^
[*] 7 ^
[*] tokens ^
[*] for ^
Any ideas?
Last edited by MicrosoftSam (2008-07-31 18:21:22)

I had considered that my last post wasn't my usual 'as thorough as possible' was busy and also not quite sure what I could add that would be helpful.
Basically whether I was installing in vbox or not is probably a non-issue..
i've had the error before with FTP installs...
as I recall I could ALWAYS get around the problem by making SURE I had a net connection via wire that worked and then the actual problem my end I could always overcome by re-formatting the drive FROM within the arch install routine....
so basically if I went back and repartitioned the drive all would be well....
my guess is that there may be something that's fixed or soon to be fixed in the install.....dunno though...
Also, I LOVE and ONLY do FTP installs now.... I get a better sense of 'clean' when doing one...
Well, I hope you can see from the above that I didn't really know how to elaborate earlier.... this all may not be that helpful.
best wishes
Last edited by yvonney (2008-08-24 01:44:28)

Similar Messages

Installing: hotkeys for Select Packages, Install Packages,

Hi everyone.
Ive been trying to install arch but because I dont know what keys to press to select something I am stuck at stupid places.
So I was wondering if someone could tell me the proper keys (and If its allowed Im thinking about adding them to the "Beginners Guide", because I really think they are needed there).
The first time I got stuck was when I was supposed to "select packages". What key(s) are to be pressed to select it?
I asume its the same keys as for window after that one. If not so, could someone write those aswell.
Later I found a problem with "nano" where I didnt know how to select, and stuff like that.
I got some help with how to save and exit. Also I never got that ^ meant control before they said so.
http://bbs.archlinux.org/viewtopic.php?id=55023
ctrl+o save
ctrl+x exits
ctrl is what the ^ means on the bottom menu.
I tried searching for it and read in the manual. But I guess its to "basic" to be in it.
Does anyone see a problem with me adding an explanation for:
^ = ctrl
and what key to press to select something when selecting packages
to the "Beginners Guide"?

I assume you use space for selecting categories and packages, at least it's the normal thing to assume (maybe as normal as ^ meaning ctrl), it has been some time that I installed Arch.
If you feel putting these things in the Beginner's Guide would be a good thing, just go ahead. That's why it's a wiki.

Visual C++ 2005 Redistributable (x64) install error

I am trying to install a management product's agent for package distribution. I have worked with the vendor and they are stating its a Microsoft issue with the OS.
Here is the error:
Product: Microsoft Visual C++ 2005 Redistributable (x64) -- Error 1935.An error occurred during the installation of assembly 'Microsoft.VC80.CRT,type="win32",version="8.0.50727.4053",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64"'.
Please refer to Help and Support for more information. HRESULT: 0x80073715. assembly interface: IAssemblyCacheItem, function: Commit, component: {844EFBA7-1C24-93B2-A01F-C8B3B9A1E18E}
I can install other versions of the Visual C++ redist without issue. I cannot find an install for the version listed in the error message. From what I have gathered the server (Windows Server 2008 SP2) is missing assemblies in the winsxs folder.
Is it possible to copy these assemblies from another server and create the associated registry keys? Can someone point me to the correct folders and registry values if this is possible?
I have tried installing from an elevated command prompt using the agent install file supplied by the vendor. I have exported the version of C++ redist from install package and tried installing it from an elevated command prompt.
I also ran an sfc /scannow and it found corruption that it cannot repair. I can post the log if needed. If shows a lot of transactions with the following output:
0000000c Call to uninstall failed, the TLC is not currently installed by that installer
I have tried using the .net framework repair tool as well. I have also tried reinstalling .net framework 3.5 sp1.
Suggestions and thoughts? This server cannot be rebuilt as it is highly utilized.

Hello Justin,
The problem is not clear just from the error 1935. Could you please try the solution listed on the following page and see the results?
http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/error-1935an-error-occurred-during-the/7105ee7e-ab45-4bd2-b5db-a3e9002f7f9e
You may need to do some clean reboot on your OS. The problem is indeed related to your OS.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

PROBLEM SOLVED--CS5 WIN7 X64 INSTALL ERROR DEPENDENCY FAILURE

PROBLEM SOLVED!!!!!!!!!!!!
I just spent 9 hours straight on this, but will was stronger than "its". Now I have both cs4 and cs5, but hopefully it will work if you just have cs5 as well. I also did not try runnning cs5 installer first after implementing the fix, maybe that will work too..And when getting the cs5 error, I went to re-install cs4 but got an error as well so that is why I took the steps I did. On 7x64 do the followin
First run the cs5 cleanup tool and reboot.
Second, go into c:\program file(x86)\common files\adobe\installers . Delete everything in it
Then go into you registry (start, run, then type regedit) and expand to this registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\ Components ...(if this isnt there, try an install again, then go to the folder that you deleted the files from a moment ago and extract the log from the zip file and open it and go to the end. where it says error 1402 will be followed by a unknown\components\(a bunch of numebers right here)\(more numbers) ...
Copy the numbers directly after the components\ and go back into registry and click edit then "find" paste those numbers into the box and hit find..when you get to the key, scroll ALL the way back up to components again. Right click components and hit permissions.. Go to advanced and then the ownership tab up top.. click edit, hightlight administrator(s), check the box to "replace subcontainers" and click apply. respond yes to everything and close that and hit apply again if asked. then click the add button above the advanced button you just clicked. when the new box appears, click advanced and then click find now. Highlight Administrators and SYSTEM and hit OK. Then give both of them full rights and hit apply. Then click advanced again and in the first window check the box that says "replace all child objects...." and hit apply. accept the prompts and hit okay.
Now go into c:\windows and on the system32 folder, right click and go to properties. Go to the security tab. Click advanced and then "owner" and click edit. highlght administrators and check the box "replace all child object....." again and hit apply....
Now give Administrators, SYSTEM, AND TrustedInstaller full rights by clicking edit above the advanced tab in the first properties box.. Then click advanced again and in the first window click replace all child object....." again and hit apply....
Now do the same for the winsxs folder and (for good measure i did syswow64 but not sure if its necessary)...
Now you should be able to install both versions..(as i said, I installed cs4 first, maybe it was not necessary)...
If you dont like the idea of just blindly giving administrators full rights to all system folders, you can spend MANY MANY hours running the installs over and over and getting the faulty registry value that caused it to fail and create specific permissions for that and then go on to the next value that fails......what a pain
Message was edited by: DarkMatter78

Thank you for this.
I have been trying to install CS5 MC now for weeks. I first got it to install everything except After Effects and Premiere Pro. Then trying to follow all the suggestions on this forum I wound up not being able to install any part of it at all. Now..
Well...following your kind suggestions as much to the letter as I could I have now been able to install everything...except Affter Effects and Premiere Pro. Sigh.
At least I can get back to work on everything that doesn't require AE and PPro. I still need to get them installed and working.

R12 Install - error when selecting a professional form

Hi Guys,
Just installed R12 on Linux accessing via VM machine on windows desktop. The application has installed correctly and i can log into the application self service screen but soon as i try to go into
professional forms i get an error on my IE page. When i look at the details i get Error Permission denied... any ideas as i dont want to reinstall again ?
Bal

What is the exact release of R12 you have installed?
What is the OS version?
but soon as i try to go into professional forms i get an error on my IE pageWhat is the client OS? What is the browser?
When i look at the details i get Error Permission deniedWhat is the complete error message?
Can you reproduce the issue from another machine/browser?
Can you find any details about the error in Apache log files?
any ideas as i dont want to reinstall again ?Does AutoConfig complete successfully?
Thanks,
Hussein

Itunes install error message - program not found ...x64/difxinst64.exe

itunes install error message - program not found ...x64/difxinst64.exe
no problems with ITunes on Dell Inspiron Windows 7 until yesterday. ITunes version 11.0.2. iphone won't connect stating required software is not installed. uninstall and install 64 bit version of iTunes. I have 64 bit version already. I have uninstalled and reinstalled 5 times already. When re-installing ITunes get error message c:\programdata\34be82c4-e596-4e99-a191-52c6199ebf6\x64\difxinst64.exe. file does not have a program associated with it for performing this action. please install or create an association in the Default Programs control panel. iTunes install continues after the difxinst64.exe error message but then get the iphone cannot be used error message again. therefore, I can't sync my iphone with iTunes until I figure this out.
can't win for losing. had iTunes on my windows 7 laptop for 4 years. first time I've ever encountered this.

I am a PC Tech and had a customer with this issue. Ran across this post in my search and ended up finding the solution on my own. The problem isn't with the iTunes software but the installer for the GEARAspi drivers. Really the issues is with the file type asssociations in the windows registry. On the system I was working on the HKCR key for .exe should point to the exefile key but pointed to nothing. To fix it create a new txt document and paste the following in (only paste what is in between the [code][/code] tags):
[code]
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\.exe]
@="exefile"
"Content Type"="application/x-msdownload"
[HKEY_CLASSES_ROOT\.exe\PersistentHandler]
@="{098f2470-bae0-11cd-b579-08002b30bfeb}"
[/code]
Now change the extension from .txt to .reg. Then right click and select merge. iTunes should now install properly.

While installing itunes i am getting error "this installation package could not be opened.verify that the package exists and that you can access it,or contact the appliacation vendor to verify that this is a valid windows installer package"

While installing itunes i am getting error "this installation package could not be opened.verify that the package exists and that you can access it,or contact the appliacation vendor to verify that this is a valid windows installer package"

I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

Error while installing Grid Control 12c (ERROR STREAM: *sys-package-mgr*: skipping bad jar)

Hi all,
   OS: OEL 6.3 64 bits
   DB: 11.2.0.3
   Grid: 12.1
   While installing Grid Control 12c, the following error appears to me:
INFO: SaveInvWCCE JRE files in Scratch
INFO: oracle.installer.mandatorySetup property is set to false, so skipping the execution of additional tools
INFO: oracle.installer.installUpdates property is set to false, so skipping the checking of updates
INFO: Config Initialize JRE files in Scratch
INFO: no env vars set, no envVars.properties file is generated
INFO: none of the components are configurable
INFO: This is a shared oracle home or remote nodes are null. No copy required.
INFO: Adding iterator oracle.sysman.oii.oiif.oiifw.OiifwRootShWCDE
INFO: Updating the global context
INFO: Path To 'globalcontext.xml' = /gridControl/WLS/jdk16/install/chainedInstall/globalcontext
INFO: Since operation was successful, move the current OiicAPISessionDetails to installed list
INFO: Install Finished at: 2013-07-04_11-12-49-PM
INFO: The ARU ID found in shiphomeproperties.xml file is 226
INFO: ARUId present in shiphomeproperties.xml matches with the 64 bit OMS Platforms ARU ID 226, so -d64 is passed for wls install.
INFO: Executing the command /gridControl/WLS/jdk16/jdk/bin/java   -d64 -Djava.io.tmpdir=/gridControl/WLS/.wlsinstall_temp -Xms128m -Xmx1024m -jar /u01/binaries//wls/wls1035_generic.jar -mode=silent -silent_xml=/gridControl/WLS/.wlsinstall_temp/wls.xml -log=/u01/oraInventory/logs/installActions2013-07-04_11-07-45PM.log.wls -log_priority=debug
INFO: Extracting 0%....................................................................................................100%
INFO: ERROR STREAM: *sys-package-mgr*: skipping bad jar, '/u01/binaries/wls/wls1035_generic.jar'
INFO: #
INFO: # A fatal error has been detected by the Java Runtime Environment:
INFO: #
INFO: # SIGSEGV (0xb) at pc=0x0000003a23689cdc, pid=24834, tid=139710737405696
INFO: #
INFO: # JRE version: 6.0_24-b50
INFO: # Java VM: Java HotSpot(TM) 64-Bit Server VM (19.1-b02 mixed mode linux-amd64 compressed oops)
INFO: # Problematic frame:
INFO: # C [libc.so.6+0x89cdc]
INFO: #
INFO: # An error report file with more information is saved as:
INFO: # /tmp/hs_err_pid24834.log
INFO: #
INFO: # If you would like to submit a bug report, please visit:
INFO: #   http://java.sun.com/webapps/bugreport/crash.jsp
INFO: #
INFO: Return value is 134
INFO: POPUP ERROR:Installation of Oracle WebLogic Server has failed, check log files for more details.
   The line "skipping bad jar, '/u01/binaries/wls/wls1035_generic.jar'" is the one that's worring me. Can it be corrupt? Or it is something else?
   Thanks in advance.

Its too early to conclude the issue is a bug with out looking into the logs. For the same reason i requested you to open an SR so that we can have a look at the logs and identify the cause. If you are Oracle employee then you can share the VM details else we need logs to debug this further. If any one from your company can open an sr and share logs then that will be helpful. Can you also check if the shiphome that you downloaded is all correct and checksum/byte matches to what is mentioned on OTN.

ERROR: DW006: Apple Package failed to install successfully. ERROR: Third party payload installer Adobe Photoshop Lightroom 5.pkg failed with exit code: 1

Hi,
i have the following message when i tried to install LR 5.6
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR: DW006 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s)
----------- Payload: Adobe Photoshop Lightroom 5 5.6.0.0 Adobe Photoshop Lightroom 5.pkg_5.6 -----------
ERROR: DW006: Apple Package failed to install successfully.
ERROR: Third party payload installer Adobe Photoshop Lightroom 5.pkg failed with exit code: 1
how can i solve this issue?
I am running on Mac with OSX 10.9.4
thanks in advance
Olivier

olebreth wrote:
how can i solve this issue?
A search of the site would probably be a good start:
https://forums.adobe.com/search.jspa?q=dw006

Error in select table from package

hi all,
I am using Oracle 10.02.04. I have a package named as N_UTL.
In this package (N_UTL) I have a select as
      SELECT COUNT (*)
        INTO n
        FROM MDSYS.sdo_index_metadata_table
       WHERE sdo_index_owner = USERI get a complication error in N_UTL package
Error: PL/SQL: ORA-00942: table or view does not exist
Line: 121
Text: FROM MDSYS.sdo_index_metadata_tableWhen I execute this command from sql windows
SELECT * FROM MDSYS.sdo_index_metadata_table
       WHERE sdo_index_owner = USERIt return rows, but from the package it does not return rows.
I have also granted grant execute any procedure to my_user
Could some one pls help me out
Thanks and regards
Saz

Hi;
Can you give below grant to user and retest issue pelase
GRANT EXECUTE ON PROCEDURE PROCEDURE_NAME TO SOME_USER;
Regard
Helios

ERROR: DW006: Apple Package failed to install successfully. ERROR: Third party payload installer Adobe Acrobat XI Pro Installer.pkg failed with exit code: 1

Hi All, anyone with this problem with Acrobat Pro XI, IM USING MAC, also Yosemite if that helps.
Also Adobe CC, BASICALLY IT just quit and i had to uninstall, re install, and I get this
ERROR: DW006: Apple Package failed to install successfully.
ERROR: Third party payload installer Adobe Acrobat XI Pro Installer.pkg failed with exit code: 1
Anyone with same issues...

Same problem. Creative Cloud subscriber running Mac 10.10.2 on iMac (Retina 5K, 27-inch, Late 2014). All apps work fine EXCEPT for Adobe Acrobat XI. I have tried 100 times and 100 solutions. NOTHING works.

Load from Infoprovider with selection package error

Hello,
Requirement: Data transfer from one application to another application in BPC
Version: BPC 7.5 NW SP08
Source application: MGMT
Target Application: LEGAL
Transformation File: Yes
Conversation File: Yes for Location Dimension
Source records: 103 (The data is for only one Location)
When I run Load from Infoprovider with selection Package (/CPMB/LOAD_INFOPROV_UI package) i am able to load 99 records loading and 4 records are getting error.
Error Message: 121 ,41513000,,N,AVER,Y,2011,,1030,1030,,,0.0000000
Line 121 :Dimension:LOCATION member: convert failed in line 121; rejected
Analysis: Location conversion is already in place and other 99 records are able to success on the same conversion rule. I have checked transformation, Conversion files. When I validate the transformation file with data then also i am seeing same error.
Note: I am using same package to load data from BW Cube to MGMT application that time i am able to load without error, When I load the same data from MGMT to LEGAL then this error is coming.
I appreciate any clue on this error.
Thanks,
Sri
Edited by: sribpc on Oct 10, 2011 8:02 PM

We are able to solve the problem,
In the Account Dimension for one of the property we maintained some value with comma in it. That created a bad data and system throwing error.
After changing Account dimension attribute then the package is working fine.
Thanks for the support.

How can pkg-get resolve and install dependancies for a selected package?

Hi all,
i am using pkg-get for installing phpmyadmin an a solaris 10 os.
when i do "pkg-get -i phpmyadmin", hi try to install apache2 but he cannot because he don't want to install the dependancies for his package
-bash-3.00# pkg-get -i phpmyadmin
WARNING: gpg not found
No existing install of CSWphpmyadmin found. Installing...
Pre-existing local file phpmyadmin-3.1.2,REV=2009.02.27-SunOS5.8-all-CSW.pkg.gz matches checksum
Keeping existing file
Analysing special files...
Trying to install dependancy apache2
No existing install of CSWapache2 found. Installing...
Pre-existing local file apache2-2.2.11,REV=2009.03.29-SunOS5.8-all-CSW.pkg.gz matches checksum
Keeping existing file
Analysing special files...
Trying to install dependancy apache2c
Error: dependancies for apache2c not up to date.
You may call pkg-get again with '-v -u apache2c' to see which ones
Or, call pkg-get with 'upgrade all' to bring all installed pkgs up to date
ERROR: install of CSWapache2c failed
ERROR: could not install required dependancies for CSWapache2
Once dependancies are up to date, call
/opt/csw/bin/pkg-get -i apache2
to (re)install
ERROR: install of CSWapache2 failed
ERROR: could not install required dependancies for CSWphpmyadmin
Once dependancies are up to date, call
/opt/csw/bin/pkg-get -i phpmyadmin
to (re)installif i want to install apache2c, he don't want, because he don't have the dependancies, etc....it's infernal, i try "pkg-get -u" for upgrade all package, but it's don't resolve any thing.....
have we a way for configuring pkg-get for installing the dependancies by himself? (like apt-get)
another pb : when i try to install one of the dependancies, i have the messsage "Les conventions d'administration syst�me n'autorisent la cr�ation que
d'une seule copie du module <CSWggettextrt>. Or, le nombre maximal de
copies de module admis en m�me temps et sur le m�me syst�me est d�j
atteint.
"sorry it's in french but it said that he don't want to install the package because "the system administrattion convention allow only one copy of the package", it is because it's already installed?
thank for your help....

Hi
For the last problem, what does
pkginfo | grep gettext
show?
Paul

Glibc error when installing OEL 5.8 packages for 10g install

Hi, I have the following errors occurring when installing the pre-requisite packages for a 10g install. I'm following the instructions on
http://www.oracle-base.com/articles/10g/OracleDB10gR2InstallationOnRHEL5.php
file /usr/lib/gconv/libISOIR165.so from install of glibc-2.5-81.i386 conflicts with file from package glibc-2.5-81.i686
file /usr/lib/gconv/libJIS.so from install of glibc-2.5-81.i386 conflicts with file from package glibc-2.5-81.i686
file /usr/lib/gconv/libJISX0213.so from install of glibc-2.5-81.i386 conflicts with file from package glibc-2.5-81.i686
file /usr/lib/gconv/libKSC.so from install of glibc-2.5-81.i386 conflicts with file from package glibc-2.5-81.i686
file /usr/libexec/getconf/POSIX_V6_ILP32_OFF32 from install of glibc-2.5-81.i386 conflicts with file from package glibc-2.5-81.i686
file /usr/libexec/getconf/POSIX_V6_ILP32_OFFBIG from install of glibc-2.5-81.i386 conflicts with file from package glibc-2.5-81.i686
file /usr/sbin/iconvconfig from install of glibc-2.5-81.i386 conflicts with file from package glibc-2.5-81.i686
[root@oravm1 Server]# rpm -Uvh glibc-2.5-81.i86.rpm
I'm not sure what to do as the 10g install complains that the glibc package is not installed as a requirement for the db software install.

yum list glibcLoaded plugins: rhnplugin, security
This system is not registered with ULN.
ULN support will be disabled.
Installed Packages
glibc.i686 2.5-81.el5_8.1 installed
Available Packages
glibc.i386 2.5-81.el5_8.1 el5_latest
Should I really have the i686 version installed?
The 5.8 install includes the i686 version and the i386 version. Perhaps only the i386 version should have been installed. Am I right? If so should I remove the i686 version and how?
yum install glibcLoaded plugins: rhnplugin, security
This system is not registered with ULN.
ULN support will be disabled.
Setting up Install Process
Package glibc-2.5-81.el5_8.1.i686 already installed and latest version
Nothing to do
[root@oravm1 ~]#
Also.....
The install warned that the swap was not lareg enough, I recall something like 2.7GB when I have actually made it 2GB.
And the other things was ....
Checking for shmmax=536870912; found shmmax=33554432
The instructions I followed say nothing of setting this so high.
Edited by: ImiDataMan on Apr 11, 2012 4:49 PM

What does ERROR: DW050: - SQL Server Compact 3.5 SP2 x64: Install failed

What does ERROR: DW050: - SQL Server Compact 3.5 SP2 x64: Install failed mean

What Adobe software are you trying to install? Which operating system are you using? You may also want to review Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html as the error your posted is not very actionable at the moment.

FTP x64 Install - Error at Selecting Packages

Similar Messages

Maybe you are looking for