FTP2IDoc - SYSTEM_NOT_CONFIGURED_AS_XMB

Hi, well my scenario ran but now it's stucked.
In channel Monitoring the text-file is read from FTP, transformed but don't show up in SXMB_MONI because i have been told:
ErrorCode: SYSTEM_NOT_CONFIGURED_AS_XMB ErrorText: ErrorStack: System not configured as XI Integration Engine
Well i checked SXMB_ADM, configure IE and there it is configured as Integration Engine. I re-saved this configuration in thought of this might help but i doesn't so far.
Queues are also empty (otherwise message would show up in SXMB_MONI).
Any help appreciated....
br Jens

Hi Raj,
i already checked the configuration at XI side - as mentioned it worked so far the days before.
At receiver system there was nothing configured in SXMB_ADM -> Integration engine....refering on the HTTP-Destination (dest://....)
But i don't see a need to do this now because it worked so far.....
When getting IDocs from this systems, XI works fine....
any ideas?!

Similar Messages

SOAP Adapter Problem

Hi,
I 've the following scenario:
Legacy (File)->XI-(Split the message)-->Proxy
I receive the file, into XI, I split the message and send one message for each line, and send to proxy.
The communication channel for proxy is not able to with multiple structures, for solved it i have a communication channel SOAP Receiver and SOAP Send.
The systems are:
BS_LEG (Sender)
BS_XI
BS_SAP (Receiver)
In configuration i have:
Sender BS_LEG
Interface: MT_File_OUT
CC: CC_File_Send
Receiver: BS_XI
Interface: MT_File_ABS (Split)
CC:CC_SOAP_Rec
Message send one to one.
Sender: BS_XI
Interface:MT_File_ABS (Split)
CC: CC_SOAP_Send
Receiver: BS_SAP
Interface:MT_File_IN
CC: CC_Proxy_Rec
In Communication channel SOAP Adapter Receiver returns the following error:
SYSTEM_NOT_CONFIGURED_AS_XMB
I have check all configurations and it seems ok.
Please, could somebody help me? Thanks.
Gemma

Hello Gamma,
go thru the below threads might help
SYSTEM_NOT_CONFIGURED_AS_XMB
FTP2IDoc - SYSTEM_NOT_CONFIGURED_AS_XMB
SYSTEM_NOT_CONFIGURED_AS_XMB Error
Cheers
Agasthuri Doss

SYSTEM_NOT_CONFIGURED_AS_XMB

HI,
I have defined the communication channel for XI adapter for the receiver system and when i try to pass the vendor details from R/3 thro BD14 i am getting the following error in XI (SXMB_MONI)
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SYSTEM_NOT_CONFIGURED_AS_XMB</SAP:Code>
<SAP:Stack>System not configured as XI Integration Engine</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
Plz help me out i have checked in SXMB_ADM the role of the business system is HUB,
and i have also checked all the business system the sender and receiver system is Application system with the related integration server as XI server and the business system for the XI server the role is the integration server and corresponding URL as http://<host>:<port>/sap/xi/engine?type=entry.
Request you to guide me for this problem
Regards,
Anand

Anand,
enter the following in SXMB_ADM->IntergationEngineConfiguratin->sepcific configuration.
add the following.
Category:RUNTIME Parameter:IS_URL Value:http://<host>:<port>/sap/xi/engine?type=entry.
Regrards
Sreeram.G.Reddy

SYSTEM_NOT_CONFIGURED_AS_XMB problem

Hi All,
     Am trying to construct a simple XI Scenario as described in the following blog.
/people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-ii
My application is able to read the xml file but the receiver is not able to get the file.Am trying this out with a single XI server installation as this is a simple type (Netweaver 2004s, SP9).When i checked the runtime workbench i found the following messages
Time Stamp Status Description
2008-05-16 16:32:59 Success Channel cc_xmlfile_sender: Send binary file "c:\XI_FILES\SENDER\xi_input.dat". Size 188 with QoS EO
2008-05-16 16:32:59 Success Application attempting to send an XI message asynchronously using connection AFW.
2008-05-16 16:32:59 Success Trying to put the message into the send queue.
2008-05-16 16:32:59 Success The message was successfully retrieved from the send queue.
2008-05-16 16:32:59 Success File "c:\XI_FILES\SENDER\xi_input.dat" deleted after processing
2008-05-16 16:32:59 Success The message status set to DLNG.
2008-05-16 16:32:59 Success Message successfully put into the queue.
2008-05-16 16:32:59 Success The application sent the message asynchronously using connection AFW. Returning to application.
2008-05-16 16:32:59 Error Received XI System Error. ErrorCode: SYSTEM_NOT_CONFIGURED_AS_XMB ErrorText:   ErrorStack: System not configured as XI Integration Engine
2008-05-16 16:32:59 Error Transmitting the message to endpoint http://<sysname>:8000/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: SYSTEM_NOT_CONFIGURED_AS_XMB:.
Can someone please help me out with this
Regards,
karthik

Hi,
   Thanks for that reply.As given in the blog which i have mentioned earlier am using Third party systems only.But still thereceiver is not able to receive the message.
This is the response of the check integration Engine Configuration Data
     Current Configuration (local):
     Role of Business System: Integration Server
     Client 001 is Integration Server
     Corresponding Integration Server: http://<sysname>:8000/sap/xi/engine?type=entry
     System Landscape:
     Role of Business System: Integration Server
     http://<sysname>:8000/sap/xi/engine?type=entry
     Comparison of Current Configuration with System Landscape
     Role of Business System: Current Configuration = System Landscape
     Corresponding Integration Server: Current Configuration = System Landscape
don't have a clue what the issue is???
Regards,
karthik

Error:INTERNAL.SYSTEM_NOT_CONFIGURED_AS_XMB

in http->xi->file
when i use http sender adapter with http client
i got the error message as follow:
<SAP:Error><SAP:Category>XIServer</SAP:Category>
<SAP:Code>INTERNAL.SYSTEM_NOT_CONFIGURED_AS_XMB</SAP:Code>
<SAP:Stack>System not configured as Integration Engine</SAP:Stack></SAP:Error>
any reply is appreciated
Thank you very much

Hi,
you can check:
- TCODE - SXMB_ADM
- integration server
- edit - change global config - check if you have: integration server set
Regards,
Suraj

SYSTEM_NOT_CONFIGURED_AS_XMB Error

Hi
I'm doing simple File to File scenario.. both sides i'm using Business Services only.. if i kept the file in the sender directory file was picking .. but the Reciver file was not loaded.. if i check in the RWB i'm getting the following Error..
SYSTEM_NOT_CONFIGURED_AS_XMB
i used both sides Business services only.. then why i'm getting this message.. i had gone through the several links also.. but they are telling we need to configure the systems in SLD.. but i'm using business services.. so, please provid eme the solution..
Thanks
Babu

Hi Babu !!
Check the OSS Note on this - 764176.
Follow all the steps as mentioned in this blog.
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
just try this also----
>>>>>
run transaction SXMB_ADM
choose option as "Integration Engin Configuration"
then Edit > Change Global configuration Data"
and choose "Application System" as a Role of Business System.
& corresponding integartion server as "http://ipaddr:httpServicePort/sap/xi/engine?type=entry"
Regds
Abhishek

Error in XI: INTERNAL.SYSTEM_NOT_CONFIGURED_AS_XMB System not c

When I run program UKM_TRANSFER_ITEMS it throws the following error. I suspect from the error message it is related to XI but I don't know what it means. Does anybody know?
Message number is UKM_PI008

run transaction SXMB_ADM
choose option as "Integration Engin Configuration"
then Edit > Change Global configuration Data"
and choose "Application System" as a Role of Business System.
& corresponding integartion server as "http://ipaddr:httpServicePort/sap/xi/engine?type=entry"
example : http://172.25.8.117:8000/sap/xi/engine?type=entry
and save it

System not configured as XI Integration Engine

Hi
I trigger an interface and get the error " System not configured as XI Integration Engine ". I get this error at the Call Adapter stage. How do I check in the receipient system ?
Regards

Hey,
You can find similar issue faced by other and solution in SDN.
Have a look at these threads.
System not configured as XI Integration Engine
SYSTEM_NOT_CONFIGURED_AS_XMB
regards
Ramesh

Error: System not configured as XI Integration Engine

Hi All,
I a getting this following error in RWB-->message monitoring -->adapter engine -->audit log
"2007-11-29 09:28:45 Error Received XI System Error. ErrorCode: SYSTEM_NOT_CONFIGURED_AS_XMB ErrorText: ErrorStack: System not configured as XI Integration Engine
2007-11-29 09:28:45 Error Transmitting the message to endpoint http://p2p:8003/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: SYSTEM_NOT_CONFIGURED_AS_XMB:.
what might be the possible errors..
regards,
Rajesh

Hi Rajesh,
you can go through these chek steps
1)go to SLD-->Business systems...and check the role of business system Web AS ABAP (tht was created during installation)...check if the role is integration server
2) go to sxi_cache and in the menu tool bar goto "GoTo" and click AE cache and see if the link is fine? whether the link in sxi_cache for AE cache is showing green traffic signal and also perform a delta refresh.
3)Check whether your business system is tied to the integration server in SLD.
4)In the transaction sxmb_adm -> Integration Engine Configuration can you check whether that role has been defined as Integration Server.
hope these checks will solve your problem
Thanks
sandeep sharma
PS:If helpful Plz reward points
Also you may check whether in specific configuration you may need to add Category as Runtime Engine_Type and current value as HUB.

ValueMappingReplication

HI
Please check this thread ,may help you.
Error in XI: INTERNAL.SYSTEM_NOT_CONFIGURED_AS_XMB System not c

Hi
I created a program to execute the RFC.
When I go to MessagingSystem I see the following error for the call I executed:
XI_J2EE_MESSAGING_SYSTEM
CALL_CONSUMER_ERROR
and
Returning synchronous error notification to calling application: com.sap.aii.af.ra.ms.api.RecoverableException: java.net.ConnectException: Connection refused: connect.
Transmitting the message using connection http://<host>:8090/sap/xi/engine?type=entry failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: java.net.ConnectException: Connection refused: connect.
Best Regards
ROn

XI_J2EE_ADAPTER_XI_HANDLER Error

Hi Experts,
I have done file to idoc scenario and file to file scenario.
after activating the objects in integ.directory , i couldnt see the processed msgs in sxmb_moni for both scenario.
In RWB comoponent monitoring when i see communication channel monitor it shows only outbound msgs but both comm.channel functioning properly.even i could see the msgs in mesage monitoring(except outbound msgs). the outbound log shows the msg executed succesfully waiting in que. after some times it shows status: system error, error category:XI_J2EE_ADAPTER_XI_HANDLER , error code:SEND_CONSUMER_ERROR. I think the mesages not going in to integ.engine.
                i thought it might be a cache problem .So I execute the Tcode SXI_CACHE it shows following error 1,Unable to Refresh Cache Contents 2, Error During Last Attempt to Refresh Cache. i double click the above error it shows following details.
                                           Incorrect XML display for AlertCategory
                                            Error during deserialization
                                             Data loss occurred when converting 011136c23c9430359b57c0ef8949c630
     Can you give me the solution
Thanks
Raja Mohamed

Hi,
Check these threads...
Re: File is picked up but never show the XML message in SXMB_MONI
SYSTEM_NOT_CONFIGURED_AS_XMB
CCM2.0 Config in NW2004s (PI7.0) u0096 XI Error
Regds,
Pinangshuk.

XI_J2EE_ADAPTER_XI_HANDLER

Hello experts,
We are facing a critical problem .
We are getting the following error in IFR.
Message Data
Attribute Value
Engine Adapter Engine
Status System Error
Repeatable Yes
Cancelable Yes
Start 17.01.2008 17:11:50
End 17.01.2008 22:11:29
Sender Party
Sender Service BS_OSX
Sender Interface urn:sap-com:document:sap:rfc:functions
CONTROL_RECIPE_DOWNLOAD
Receiver Party
Receiver Service
Receiver Interface
Quality of Service Exactly Once
Error Category XI_J2EE_ADAPTER_XI_HANDLER
Error Code GENERAL_ERROR
Message 2870CC28B18314610720F1C004D00808
I have checked all setting in SLD,smicm,sxmb_adm,communication channels are working fine, SLD cache has been refreshed, Business system has Integration server attached to it.
But still i am not able to rectify the problem.
Please suggest something . How to rectify this problem
This is very urgent .
Regards
SAras Jain

RFC adapter received tRFC for CONTROL_RECIPE_DOWNLOAD with TID A0473CAB6356478FB7A2088D from OSX/070. Attempting to send message asynchronously
2008-01-17 22:17:00 Success Application attempting to send an XI message asynchronously using connection AFW.
2008-01-17 22:17:00 Success Trying to put the message into the send queue.
2008-01-17 22:17:00 Success Message successfully put into the queue.
2008-01-17 22:17:00 Success The application sent the message asynchronously using connection AFW. Returning to application.
2008-01-17 22:17:00 Success The message was successfully retrieved from the send queue.
2008-01-17 22:17:00 Success The message status set to DLNG.
2008-01-17 22:17:00 Error Received XI System Error. ErrorCode: SYSTEM_NOT_CONFIGURED_AS_XMB ErrorText:   ErrorStack: System not configured as XI Integration Engine
2008-01-17 22:17:00 Error Transmitting the message to endpoint http://orxidd01:8002/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: SYSTEM_NOT_CONFIGURED_AS_XMB:.
2008-01-17 22:17:00 Success The asynchronous message was successfully scheduled to be delivered at Thu Jan 17 22:22:00 EET 2008

XI_J2EE_ADAPTER_XI_HANDLER - GENERAL_ERROR

Hi,
Scenario: RFC adapter to File adapter.
I am getting the following error:
Message Data
Attribute Value
Engine Adapter Engine
Status Waiting
Repeatable Yes
Cancelable Yes
Start 15.05.2007 19:57:18
End 15.05.2007 19:57:18
Sender Party
Sender Service CD1
Sender Interface urn:sap-com:document:sap:rfc:functions
ZXI_TEST
Receiver Party
Receiver Service
Receiver Interface
Quality of Service Exactly Once
Error Category XI_J2EE_ADAPTER_XI_HANDLER
Error Code GENERAL_ERROR
Message 0092C60810453891061093C41CD2CD1C
Reference
Can anyone help?
Thanks,
Leanne

Hi,
I have found error is the message, please help:
2007-05-15 20:07:18 Success The asynchronous message was successfully scheduled to be delivered at Tue May 15 20:12:18 SAST 2007.
2007-05-15 20:07:18 Success The message status set to WAIT.
2007-05-15 20:12:18 Success Retrying to send message. Retry: 3
2007-05-15 20:12:18 Success The message was successfully retrieved from the send queue.
2007-05-15 20:12:18 Success The message status set to DLNG.
2007-05-15 20:12:18 Error Received XI System Error. ErrorCode: SYSTEM_NOT_CONFIGURED_AS_XMB ErrorText:   ErrorStack: System not configured as XI Integration Engine
2007-05-15 20:12:18 Error Transmitting the message to endpoint http://jssxid0:8000/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: SYSTEM_NOT_CONFIGURED_AS_XMB:.
Thanks,
Leanne

Error while sending JDBC Results to XI

Dear members ,
I have configured a JDBC Sender based on PLain J2SE Adapter Engine.
When i start the adapter ,i get an error message
ERROR: Finished sending query result to Integration Engine with error "com.sap.aii.messaging.net.TransportException: Sending message '8ba707a0f78911d98f64c565c0a8004d' to Integration Server failed with 'SYSTEM_NOT_CONFIGURED_AS_XMB': '', context '?' , must retry". Skip confirmation and proceed with next query
Can anybody help me out.
My Configuration is as follows :-
jdbc adapter java class
classname=com.sap.aii.messaging.adapter.ModuleDB2XMB
version=30
mode=DB2XMB
Integration Engine address and document settings (example, see docu)
XI.TargetURL=http://hwsapxi:8000/sap/xi/engine?type=entry
XI.User=xiappluser
XI.Password=welcome1
XI.QualityOfService=EO
XI.SenderParty=
XI.SenderService=Factory_Sender
XI.ReceiverParty=
XI.ReceiverService=Factory_Receiver
XI.Interface=FactoryMessageInterface
XI.InterfaceNamespace=http://sap.com/factorydata

Ravindra,
It could be that the AE was not configured properly during installation. Please refer to the below link and see it helps you narrow down your problem.
Installation - Plain J2SE Adapter Engine
http://help.sap.com/saphelp_nw04/helpdata/en/b3/cc633c3a892251e10000000a114084/frameset.htm
regards,
SK

Error while developing Custom Module in PI

Hi Friends,
We have developed Module for converting XL file to XML file and deployed on PI server. We have followed the link
/people/sap.user72/blog/2005/07/04/read-excel-instead-of-xml-through-fileadapter
We got the following error, please help in this:
Received XI System Error. Error Code:SYSTEM_NOT_COFIGURED_AS_XMB Error Text: ErrorStack:System not configured as XI Integration Engine
Transmitting the message to endpoint http://BASIS1:8000/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException:SYSTEM_NOT_CONFIGURED_AS_XMB.
Regards,
Lakshmi Prasad.

Hi Lakshmi,
it is missing role "Integration Server" at transaction SXMB_ADM / Configuration Integration Engine.
Regards,
Udo

FTP2IDoc - SYSTEM_NOT_CONFIGURED_AS_XMB

Similar Messages

Maybe you are looking for