FTPEx: 550 : Cannot create a file when that file already exists.

Hi experts,
I am working on idoc to file scenario and PI 7.1. The idoc is split into 3 files.
In sxmb_moni , the message is successful , but in rwb( Message montoring) i am geeting the fllowing Error message.
' Delivering the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: An error occurred while connecting to the FTP server '172.19.125.190:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 /Storedata/Outbound/0000001802: Cannot create a file when that file already exists. '. For details, contact your FTP server vendor..'
and this error message is not displayed for all the target files , some files are getting created succesfully.
After some times , the file in error status , gets created automatically.
What may be the reason.?
Thanks in advance .
Best Regards,
Anil

There seem to be already some files in your Target Directory with the same name as your new files (which the CC is trying to place) and the CC is not able to overwrite the existing files and hence the error...check this.
Check: http://help.sap.com/saphelp_nwpi71/helpdata/EN/44/69d7cfa4b633eae10000000a1553f6/content.htm
14. Select the File Construction Mode.
u25CB Create
The file is created. The document received last is saved in each case.
If you want the created file to be overwritten, select Overwrite Existing File. If you do not set the indicator, processing is stopped until the created file is processed.
You can only set the indicator if you select Use Temporary File under Put File below.
Regards,
Abhishek.
Edited by: abhishek salvi on Jul 28, 2009 6:59 PM

Similar Messages

Cannot create a file when that file already exists, but should overwrite

Hi,
I need the same file name which is at Sender side and when it reaches to Receiver directory without timestamp.
for eg., Sender side : Yeswanth.txt
and also receiver side : Yeswanth.txt
but, here it should overwrite the existing file (because, the sender side file name is always constant) at receiver directory when the job schedules for each time.
Processing parameters i has given on Receiver side:
File Construction Mode : Create
put file : Use Temporary File
and I enabled the Adapter Specific Message Attributes at Sender side and Receiver side.
Error getting receiver side at communication channel :
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException:
Yeswanth.txt: Cannot create a file when that file already exists. : com.sap.aii.adapter.file.ftp.FTPEx: 550
Yeswanth.txt: Cannot create a file when that file already exists.
Reward points for useful answers.
Regards,
Yeswanth.
Edited by: YeswanthRaj Kumar on May 23, 2008 8:20 AM

Hi Yeswanth
Then you can try with a "Add Counter". This will create new file each time with the same name but a counter will be added to the file name at the end specifying the number of times it is created.
You can also the specify the format to create the counter once select this option u can correspondingly fill the Format and step fields.
Will this be fine.
Regards
Ashmi

Cannot rename DC, "Cannot create a file when that file already exists."

Hi,
A long time ago we used a domain controller named jacob.mydomain.lan. It was removed, possibly in a 'dirty' way, and now we cannot re-use that name for another domain controller. In the meantime we have upgraded to Win 2012 domain controllers
now, and when I enter this to rename:
netdom computername ourdc.mydomain.lan /add:jacob.mydomain.lan
I get the error: "Unable to add jacob.mydomain.lan as an alternate name for the computer. The error is: Cannot create a file when that file already exists."
If I enter:
netdom computername ourdc.mydomain.lan /remove:jacob.mydomain.lan
I get: "The command completed successfully", but it still refuses to add jacob.mydomain.lan
After each attempt to add a forward zone dns record 'jacob.ourdomain.lan' has been created. I always erase this manually afterwards.
What is the problem? How can I search to find the offending 'file' named 'jacob'?
Thanks a lot for help on this.
regards Tor

Kevin,
I suggest you wait 30 days instead of 3 days before you enthusiastically close threads. Some people might think you are being a jerk if you don't.
"K_evin Zhu" wrote in message
news:[email protected]...
Hi,
As this thread has been quiet for a while, we will mark it as �??Answered�?? as the information provided should be helpful. If you need further help, please feel free to reply this post directly so we will be notified to follow it up. You can also choose to
unmark the answer as you wish.
BTW, we�??d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar problems. Thanks for your understanding and efforts.
Best Regards
Kevin
Tomás Mason

The cluster service terminated, error 7024, cannot create a file when that file already exists

I have a test 2-node Failover cluster using Server 2012 R2
As of last night the cluster service on one of the 2 nodes is down with this error:
The Cluster Service service terminated with the following service-specific error:
Cannot create a file when that file already exists.
EventID 7024
The Cluster service waits 60 sec, tries to start, and the same error occurs again.
Any idea where to look to identify which file this error is referring to, or how to go about identifying root cause and getting a solution?
thank you.
samb

Hi Yeswanth
Then you can try with a "Add Counter". This will create new file each time with the same name but a counter will be added to the file name at the end specifying the number of times it is created.
You can also the specify the format to create the counter once select this option u can correspondingly fill the Format and step fields.
Will this be fine.
Regards
Ashmi

Cannot create a file when that file already exists

When i try to use Photoshop filters: Adaptive Wide Angle, Shake Reduction and Liquify. An error pop up saying "Cannot create a file when that file already exists".
Just one detail: The liquify filter doen't pop up the error right away, the error occurs just after i press the "ok" button to accept the changes.
I have already tryed to Reset the preferences, tryed to reinstall the PS, Update the PS, download (and install) the latests drivers to my pc.
My Pc fit in all the requirements, have the openGL version: 3.0
I also have Photoshop CS5 installed, in which the liquify filter works perfectly.
Here i have two Print Screen, how it looks:
The first image is just right before a click the "Adaptive Wide Angle"
The second one is right after i clicked it
If you could help me, i already thank you for wasting you time reading this!

Resetting the Photoshop preferences does not reset the preferences for the plugins.
There should be a Plugins folder. If the folder cannot be created it would cause the error you are seeing.
Can you check the permissions on the ‘Adobe’ folder at: C:\Users\jworthin\AppData\Roaming\Adobe.
Can you manually create a Plugins folder in that location or do you get an error?

Spotlight/Finder can't find a file, yet when I search the timecapsule for they find it. If I try to restore the file I get "file with that name already exists...." What is wrong?

I was trying to find a file (iTunes Backup). When using finder/Spotlight they couldn't find the file.
I then opened up my timecapsule and searched for the file....tick-a-de-da it found it in yesterdays backup. I attempted to restore the file and got the prompt "A file with that name already exists in this location, would you like to keep both, replace the file or cancel the request.
So if the file is there why can't spotlight/finder find the file??
If it helps I get this from the terminal when checking if indexing was enabled.
$ mdutil -s -a
Indexing enabled.
/Volumes/Data:
2014-11-18 18:09:39.542 mdutil[1472:572531] Metadata.framework [Error]: mdsCopyStoreAttributes failed: (8) (os/kern) no access
No index.
/Volumes/Time Machine Backups:
Indexing and searching disabled.
/Volumes/Time Machine Backups/Backups.backupdb:
Indexing enabled.

Hi Danielle,
Is there any possibilty that some of your files (a VI or DLL?) have been moved, renamed, or deleted? Also, what version of LabVIEW are you using and are you using any .NET DLLs? Another option to consider would involve VISA or DAQmx property nodes. Are you using any of these property nodes in your code? Here is a KnowledgeBase article to describe more about the VISA and DAQmx property nodes in a source distribution:
Error Creating Source Distributions Involving rc Files: http://digital.ni.com/public.nsf/allkb/833BFD5E9CA0224886257584004DAA4C?OpenDocument
I hope this is able to help.
Anna L
Applications Engineer
National Instruments

Quicktime displaying "A file by that name already exists."

When I try and play a video on my MacBook Pro off the internet that isnt youtube I get this stupid messsage from quicktimeX (A file by that name already exists.) and then it doesnt play the video.
Can anybody help me as this is really annoying.

Hi, not sure if this is the answer to your problem but maybe it will help. I was having this same issue the other day. I was trying to convert some movie files into iPhone format and I kept getting this error right near the end of the conversion. I have done these conversions many times with no trouble but this time it just wouldn't work. I tried everything and it kept happening. Then I got another weird error message. And then I finally realized that the destination disk for the converted files didn't have enough room on it for the file! I guess I just assumed that Quicktime would tell me there wasn't enough room when I tried to start the conversion, not pretend that it was working then crap out when the disk reached its fill level.
Who knows, maybe the same thing is causing your error. Hope this helps!

Getting error "Cannot create a BACPAC from a file that does not contain exported data." from SqlManagementClient.Dac.ImportAsync

We're trying to import a dacpac to azure via the new SqlManagementClient DacOperations ImportAsync api I get an exception with the error: "Cannot create a BACPAC from a file that does not contain exported data."
This same dacpac imports fine using an alternate but less friendly API from sql server's tooling. We'd like to use the new management SDK instead for various reasons.

Hi Kyle A Wilt,
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

LMS 3.2 - Backup-Error -- ERROR(908): Cannot create or back up tar file

Hello again,
with performing backup (LMS 3.2 on Solaris 9) the following errors will arise.
dbbackup.log
/opt/CSCOpx/bin/tar: Removing leading `/' from absolute path names in the archive Apps file : /opt/CSCOpx/backup/manifest/upm/upminfo/datafiles.txt
[Tue Dec 8 08:56:54 2009] Archiving the contents of the following directories into /enbw/backup/files/cw_db_backup/0/upm/filebackup.tar
[Tue Dec 8 08:56:54 2009] /opt/CSCOpx/hum/conf/upm-snmp.properties
/opt/CSCOpx/hum/thresholdscript /opt/CSCOpx/MDC/tomcat/webapps/upm/reports
/opt/CSCOpx/MDC/tomcat/webapps/upm/WEB-INF/classes/com/cisco/nm/upm/properti
es/common/UPM.properties
/opt/CSCOpx/bin/tar: Removing leading `/' from absolute path names in the archive
/opt/CSCOpx/bin/tar: Cannot add file
/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/virt32841308_657_658_-718594975:
No such file or directory
/opt/CSCOpx/bin/tar: Cannot add file
/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/virt32841308_658_659_1465769167:
No such file or directory
/opt/CSCOpx/bin/tar: Error exit delayed from previous errors [Tue Dec 8 09:07:30 2009] ERROR(908): Cannot create or back up tar file. Backup cancelled. Verify that you have write-access to this directory. [Tue Dec 8 09:07:30 2009] Backup failed: 2009/12/08 09:07:40 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Is seems to be problem related to maximal filesize handling of GNUtar implemented in CW2000.
The problem is with tar'ing HUM-Reports in /opt/CSCOpx/MDC/tomcat/webapps/upm/reports, and with reaching
tarfile-size of 2,9GByte error is thrown.
</exxx/backup/files/cw_db_backup/0/upm># ls -lh
total 6126448
-rw-r-----   1 casuser casusers    2.9G Dec 8 09:07 filebackup.tar
</exxx/backup/files/cw_db_backup/0/upm># ls -al
total 6126452
drwxr-x---   2 casuser casusers     512 Dec 7 14:30 .
drwxr-x--- 11 casuser casusers     512 Dec 7 14:30 ..
-rw-r-----   1 casuser casusers 3135201280 Dec 8 09:07 filebackup.tar
GNUtar-Version
# /opt/CSCOpx/bin/tar --version
tar (GNU tar) 1.13
Copyright (C) 1988, 92,93,94,95,96,97,98, 1999 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Written by John Gilmore and Jay Fenlason.
Is this a know problem?
Thanks for any thoughts.
Best Regards
Lothar

Hi Joe,
thanks for your feedback.
These files to be tarred aren't there directly after backup stops with error.
It seems that some process stores data about reports in that file and when trying to
pack these reports via tar they are delete by any cleanup method.
Does this help.
P.S. Backup usually takes about more than 1hour

LMS Backup - Cannot create or back up tar file

Hello,
We have LMS 3.2 installed and the backup is failing with the following message
"Cannot create or back up tar file. Backup cancelled. Verify that you have write-access to this directory."
I have removed Cygwin and also the set the backup to offline yet the same result. Please assist on this issue.
Thanks.

Hi Dedra,
I will not give you as much help as Joseph, but will provide you an idea for possible problem explanation.
Just following your sentence:
I removed all traces of mentioned line but still the same problem. Backup failed with the following message. I have noticed that all these backup fail after writing 4GB of data into the backup directory.
Are you sure you don't generate any file bigger than 4GB on a FAT32 file system support, which cannot be possible (external USB storage) ?
It could be the reason for such a error message returned from your tar.exe process....
D:/CiscoWorks_Backup/0/upm/filebackup.tarC:\PROGRA~1\CSCOpx\bin\tar.exe: Write error: No space left on device would be the error message returned code from this situation oversizing file maximum size.
Any simple solution would be to format your USB storage to NTFS or change backup destination to NTFS partition somewhere else for test and eliminate this supposition.
regard,
andré

HT1347 When I add a folder to the library, does that mean that 'later' when I drop a new file into that folder (already added) it will automatically end up in iTunes? (or do I have to add file/folder to library every time I have a new file??) I'm using XP

When I add a folder to the library, does that mean that 'later' when I drop a new file into that folder (already added) it will automatically end up in iTunes? (or do I have to add file/folder to library every time I have a new file??) I'm using XP...

iTunes does not actively scan the media folders. If you manually add content to a folder, then you must add that content to iTunes manually via the File > Add File/Folder feature.
The only folder that gets scanned is the "Automatically add to iTunes" folder.

Recently installed OSX 10.8.2 and found that there was NO ~/Library and when I tried to create one I was told that it already exists.

Recently installed OSX 10.8.2 and found that there was NO ~/Library and when I tried to create one I was told that it already exists.
Does anyone know why ?

It's hidden. Choose Go to Folder from the Finder's Go menu and supply that path to access it.
(71284)

How do I split a pdf file when the file size is too large?

How do I split a pdf file when the file size is too large? Thanks!

With Adobe Acrobat. It can also optimize your document to make the size smaller.

Media Source - 'file of this name already exists' transfering tracks from Zen Micro to

I've come home for the weekend, and I'm trying to transfer a few albums from my Zen Micro to my Mum's PC for her. Normally this works fine, but for some reason today I keep getting the message 'A file of this name already exists' for about 80% of the tracks I try to transfer. One or two tracks from each album will work and the rest will fail.
These are new tracks and they definitely aren't already in her music library - I've double checked the C dri've too.
I'm given the option to overwrite the exisiting tracks, so I gave that a try with one album, but the tracks still aren't didn't show on there once I'd transfered, despite the track number not going up, so god knows what's been overwritten with those!
Can anyone help?
Cheers!

Your firmware is not the PlaysForSure version.
Anyway, I just want to make sure that you have set up the directory and file naming convention correctly for MediaSource. Here is what you should do:
- Launch Creative MediaSource Oragnizer.
- Go to Tools->Settings->PC Music Library and click Properties. Set your preferred folder and file naming convention. Close the setting page.
- In the Sources window, click to view PC Music Library.
- Go to View->Right Panel View and select to view your MP3 player.
- Transfer the tracks from your MP3 player to MediaSource's PC Music Library by clicking the arrow pointing from right to left.
- If you have updated the track information of the tracks in your MP3 player, the updated track information will also be imported into the PC Music Library database. However, the tags of the files are not updated. Here is what you need to do. Right click the PC Music Library node in the Sources window or right click on any tracks in the PC Music Library window and select "Update Tag". This will update the tag of all the tracks or the selected tracks with the track information as seen in the PC Music Library.

File Error: A file of this name already exists

im using Final Cut Pro 5.1.4 and whenever I tried to export a sequence using compressor, I get that error message "File Error: A file of this name already exists". I tried reinstalling the program, nothing. What can I do to fix that?

Sounds like you already have a file by that name located in the place you want to export to. Try changing the name of your new file.
b

FTPEx: 550 : Cannot create a file when that file already exists.

Similar Messages

Maybe you are looking for