Ftping without password

On my Tiger machine, I can ssh into a redhat machine without a password. I can then ftp back to the Tiger machine . On my Leopard Machine, I can ssh to the redhat machine without a password but cannot ftp back to it even though I can ssh to the red hat machine from the Leopard MAC without. I think everything in sharing is set right.
What am I missing?

Use sftp, not ftp.

Similar Messages

  • How do I delete an Apple iCloud account from my iPhone without password, security questions, or email?

    For some reason, an old iD is stuck on my phone. My iPhone 4s is nearly filled with documents and data, to the point where I cannot take pictures, and I can't reset it without using this old iD. I don't know why this is now popping up instead of the one I am registered with. I gained access to the old email the iD is under, but none of the iTunes emails are coming in so I assume it is set up under a different email. For the security question of birthdays, I tried every household member's birthday, and none worked. I have tried the password we used on that account when it was active, along with every other possiblility. I don't know what to do anymore and I have very limited use of my phone if I don't get this sorted out and deleted from my phone.
    Thank you for any help!

    Not without password.

  • How i ccould delete my old icloud account without password

    how i could delete my old icloud account without password???
    please help

    You can't if you have iOS 7.  Reset your password as explained here: http://support.apple.com/kb/PH2617 or contact the Apple account security team for your country for assistance: http://support.apple.com/kb/HT5699.

  • Reader plug-in, save copy of password protected pdf without password

    Hello,
    We currently have an Acrobat Reader plugin (using the 8.1 SDK) and are having trouble with password protected PDFs.
    The sole purpose of our plug-in is to pass a copy of the currently open PDF to a different folder on the user's computer. The problem we are facing is with the password protected PDFs. We would like to pass a copy of the PDF that doesn't have the readonly password protection.
    Scenario:
    1. The user opens a password protected PDF in Adobe Reader.
    2. They are prompted for the password, they enter it and can see the PDF. 3. Now they click our custom button.
    4. Save a copy of the currently open PDF without password protection
    Since we already know they have entered the correct password, in theory we should be able to either save all of the content to a new file, or simply remove the password protection.
    Can anyone point me in the right direction so that I will be able to get a PDF without the password?
    Thanks,
    Ryan

    Hi again,
    I was doing some research in the API reference and examples and I think that for my business problem, it will be sufficient if I can get the read access password. I found that I am able to use the following:
    AVCryptGetPassword(pdDoc, permsWanted, (void **)&password)
    This prompts the user to enter the password and puts the actual password in the &password variable, which will will work for us. Ideally though, I would like to not have to prompt the user again for the password since they already entered when opening the pdf, is it possible to get access to the plain text of the password that they typed when opening the pdf or another way?
    I tried:
    StdSecurityDataRec* secData;
    secData = (StdSecurityDataRec*)PDDocGetNewSecurityData (pdDoc);
    if (secData) {
    if (secData->hasUserPW)
    char* mypw = secData->userPW;
    However, the password is encrypted. Thanks for your help!
    Thanks,
    Ryan

  • The user which does not exist can login BI Answers without password

    Hi I got an Issue in the BI Answers login.
    Any non-exist username can login to the BI answers without password.
    And the exist-user need the correct password.
    Does anybody have the same issue before?
    And also, any non-exist username can login to BI Answers if the password is provided as the same as username, even the user account doesn't exist.
    After the non-exist user login, the system would automatilly create this user account.
    Edited by: Jinfeng Ling on Dec 19, 2008 7:04 AM

    Hi Madan
    The Security Section in my NQSConfig.INI file is following:
    # Security Section
    # Legal value for DEFAULT_PRIVILEGES are:
    # NONE READ
    [ SECURITY ]
    DEFAULT_PRIVILEGES = READ;
    PROJECT_INACCESSIBLE_COLUMN_AS_NULL     =     NO;
    MINIMUM_PASSWORD_LENGTH     =     0;
    #SSL=NO;
    #SSL_CERTIFICATE_FILE="servercert.pem";
    #SSL_PRIVATE_KEY_FILE="serverkey.pem";
    #SSL_PK_PASSPHRASE_FILE="serverpwd.txt";
    #SSL_PK_PASSPHRASE_PROGRAM="sitepwd.exe";
    #SSL_VERIFY_PEER=NO;
    #SSL_CA_CERTIFICATE_DIR="CACertDIR";
    #SSL_CA_CERTIFICATE_FILE="CACertFile";
    #SSL_TRUSTED_PEER_DNS="";
    #SSL_CERT_VERIFICATION_DEPTH=9;
    #SSL_CIPHER_LIST="";
    # There are 3 types of authentication. The default is NQS
    # You can select only one of them
    #----- 1 -----
    #AUTHENTICATION_TYPE = NQS; // optional and default
    #----- 2 -----
    #AUTHENTICATION_TYPE = DATABASE;
    # [ DATABASE ]
    # DATABASE = "some_data_base";
    #----- 3 -----
    #AUTHENTICATION_TYPE = BYPASS_NQS;
    Can you see any problem?
    Thanks!
    Jinfeng

  • Obiee 11.1.1.6 logging in without password

    We have upgraded from obiee 11.1.1.5 to 11.1.1.6. Its a linux machine.
    Issue is when any user tries to log in to anlaytics, it allows user to log in without password.
    For example suppose user id is
    asingh and username for that user is Ajay Singh, then it allows the user to log in without entering password and it gives username after "signed in as"...
    How is this authentication possible!
    What log can I check for this?
    And the user is able to access reports...
    The process I followed was upgrade and then import security settings files from another server thats still on .5.
    Please help!

    shobhanks1987 wrote:
    We have upgraded from obiee 11.1.1.5 to 11.1.1.6. Its a linux machine.
    Issue is when any user tries to log in to anlaytics, it allows user to log in without password.
    For example suppose user id is
    asingh and username for that user is Ajay Singh, then it allows the user to log in without entering password and it gives username after "signed in as"...
    How is this authentication possible!
    What log can I check for this?
    And the user is able to access reports...
    The process I followed was upgrade and then import security settings files from another server thats still on .5.
    Please help!Did you check the flags set on the providers in the weblogic? Make sure one of the flag's from the list of providers are set to required.

  • Is it possible to login into the Java instance without password's input, using only my Windows workstation authorization?

    Dear Sirs,
    I try to do an authorization to my NW 7.3 Java instance through my Windows domain authorization.
    I done:
    1) Create connection to LDAP-server and tested it.
    2) Add windows domain certificate to TrustedCAs
    3) Configure SPnego
    Now, I can to login in my NW7.3 Java instance with my windows password, but however I must to input password when I open NW7.3 Java homepage.
    Is it possible to login into the Java instance without password's input, using my windows workstation login/password?
    What I have to do for that?
    I use Windows XP on my workstation and IE 8.0.6 & Chrome 38.0.2125.
    Best regards,
    Alexey Lugovskoy

    Please check
    Using Kerberos Authentication on SAP NetWeaver AS Java - User Authentication and Single Sign-On - SAP Library (NW7.3)
    Using Kerberos Authentication for Single Sign-On - User Authentication and Single Sign-On - SAP Library (NW7.0)

  • WebService to RFC without PASSWORD u00BFpossible?

    Hi guys,
    I have an scenario WS to RFC (sync). Some of them are standard (with password) and customer is asking me to access to one of them without password
    What or where should i configure anything??
    I dont think it is possible is WSDL, it may be in Netweaver Configuration or somewhere like this.
    Any idea to help me??
    Thanks in advance!!!
    S
    Edited by: ademiv on Sep 21, 2011 3:38 PM

    Hello,
    According to this thread, Sender SOAP adapter without authentication
    appending the username/password in the URL only work for adapters that lie on the ABAP stack. If you want, you can try using the URL in the Propose URL when generating the WSDL.
    To completely remove user authentication for SOAP Adapter, read Bhavesh's reply in the thread below
    Re: SOAP User ID/Password  - Authoraization
    Note that by doing so, all username/password authentication will be removed for all scenarios that use SOAP Adapter.
    Hope this helps,
    Mark

  • Multiple accounts without passwords

    Are you able to switch between accounts without entering a user password? Automatic login is enabled for both users in account settings. However, passwords are required for both users. In security, automatic login is not disabled. Thanks

    {quote} Automatic login is enabled for both users in account settings{quote}
    I'm not sure how this is possible. The login options can only choose one "Automatic Login" user.
    I also don't understand your header and the text. Header says multiple accounts without passwords, but text says passwords are required for both users.

  • Logon with multiple users goes directly into user without password prompt?

    I upgraded to Lion after Hard drive crashed and was replaced by apple even though I had Lion OSX they insisted that I upgraded which I eventually had to do.
    The problem is as follows:
    When PC is intially turned on the User selection screen does not appaer and the system goes straight into the first account created without password validation. All accounts setup have PW added to prevent my kids from accessing th PC. However if I loggoff the user screen appears and PW must be used. This does this on ever restart or turn on. Tried resetting & re adding the accounts but same issue occurs.
    Any help on this issue will be appreciated.
    Thanks

    System Preferences -> Security -> General -> Disable automatic login

  • How to disable purchases without password

    Purchases can now be done from my Ipod touch without password. How do I change the settings to require password for all purchases, but allow free downloads?

    A password is required for all app purchases, free pr paod inclided updateds.  Once you enter your password, you will not have to reenter it for about 15 minutes.  You can go to Settings>General>Resetrictions and set restrictions that prevent app purchases, prevent in-app purchases, and require a password for in-app purchases.

  • How to share the Mac folder to open windows without password?

    como compartilhar pasta do mac para abrir no windows sem senha?
    how to share the Mac folder to open windows without password?

    No easy way. Unless you use the same username and the same password on both system then you have to enable Windows File Sharing (SMB) in Sharing, add your Mac username and type in your password in the options of Sharing and then set a NetBIOS name and a workgroup name that is the same on both Windows and Mac. That is in the Network section under advanced WINS tab.

  • DSEE 7 online backup without password

    According to [Chapter 8 Directory Server Backup and Restore|http://docs.sun.com/app/docs/doc/820-4809/bcaim?l=en&a=view]
    You can back up directory data while the server is running by using the command dsconf backup command.
    dsconf backup asks for a password. This is not good for cron job backup.
    # dsadm backup /ldap_instance /tmp/backup
    The instance must be stopped.
    dsadm export, also requires offline (ldif export)
    I managed to do online backup from dscc console but not from command line.
    Is there any other way to take online backups (while server is running) without password?
    Best regards,
    Giannis

    Hi Giannis,
    if you only want to create database backups and not ldif exports, you even do not need a read-all user. I was able to run dsconf backup after adding the following user / acis :
    dn: cn=backupuser,cn=config
    changetype: add
    cn: backupuser
    objectclass: top
    objectclass: person
    sn: Backup User
    description: custom service user for generating backups
    userpassword: <enter-password-here>
    dn:
    changetype: modify
    add: aci
    aci: (targetattr = "*") (target = "ldap:///cn=backup,cn=tasks,cn=config") (version 3.0; acl "Allow rsca access for user backupuser on cn=backup,cn=tasks,cn=config"; allow(read,search,compare,add) userdn = "ldap:///cn=backupuser,cn=config"; )
    aci: (targetattr = "objectclass || nsslapd-config-magic") (target = "ldap:///cn=config") (targetscope = "base") (version 3.0; acl "Allow rsc access for user backupuser"; allow(read,search,compare) userdn="ldap:///cn=backupuser,cn=config"; )I do not have anonymous read access enabled and I cross checked with a dsconf backup run as directory manager, the files were identical.
    If you also want to do ldif exports or database restores, the acis need to be adapted accordingly. Probably I will have a try and post my results later on.
    Regards,
    Jakob
    Edited by: jaydir on Mar 9, 2010 2:57 AM
    Edited by: jaydir on Mar 9, 2010 2:58 AM

  • Hi ! I got an iPhone 5 from someone who I don't know the real owner. Then I wanna change iCloud on it, but I don't know the password of owner. How can I log out that iCloud account without password ? Please help me, thank you

    Thank you, please help me !

    How can I log out that iCloud account without password ?
    You can't.
    Return the phone to whoever you bought it from and get a refund. Without the previous owners password you will not be able to enter your own iCloud acount, and when you update the phone, you won't be able to re-activate it as it will be locked to the previous owners account.
    You should've checked the phone was not locked to someone else's iCloud account BEFORE buying it.
    Instructions here: http://support.apple.com/kb/ht5818

  • How can I disconnect from iCloud without password.

    Hi,
          I have lost my Apple ID password, So I have lost my iCloud password too. I am unable to login on iCloud service. I was unable to Off option "Find my iPhone"
    I tried everything but nothing is happen, i cant logout from iCloud, The mail ID which registered with apple that is also blocked. So nothing is option balance, then I reset device to Factory Restore option. But now again iPhone is asking the same icloud account and password. Now this iPhone is useless.
          Actually one of my colleague bought this iPhone 4 from second hand market one year back, he took the same apple ID what seller has given him and he is using it since 1 year, Now that guy may change his password and this guy is unable to use appstore. To put new ID we need to log out from old ID and to log out from old ID phone is asking password, so there is the problem started.
       Can anyone help me to log out from iCloud without password, please...
    Thanks
    Pramod

    From what you say the phone has been 'Activation Locked' by a previous owner - who presumably either sold it to the second-hand market or had it stolen and it landed up there.
    If this is the case, only the person who set the lock can unlock it. If you can't get hold of them to do this then the phone is permanently unusable.
    Even if you had set up a new Apple ID and logged into that the Activation Lock would have kicked in when you reset or updated the phone.

Maybe you are looking for