FTPS and SSLVLDCRT=N

Hi there..
I have a lot of SFTP and some FTP jobs running with no issues. I've received my first request to setup a FTPS job. My problem is in the agent.ini for all UNIX boxes and Window boxes I have the line SSLVLDCRT=N  Will I need SSLVLDCRT=Y to run this job? If I do that I'll have issues with my other SFTP.
Thanks for any info on this.  I did look over Devns pdf on 3.0 Agents and the UNIX SSL doc, but not sure I get it.
Here we are running Tidal 5.3.1.324
Unix Agents 3.0.1.06
Windows Agents 3.0.1.28 and 3.0.1.18 and 3.0.1.13
Informatica Solution Connector 1.61
Informatica Adapter 1.15
SAP Adapter 5.0.1.9
MS_SQL Adapter 1.1.0.16
Business Objects Adapter 1.48a

I've never liked the SSLVLDCRT=N option as it defeats one of the key reasons to use ftps.  You can run FTPS jobs with
SSLVLDCRT=N, however you are disabling the certificate validation.  This leaves you more susceptible to man-in-the-middle and spoofing attacks.

Similar Messages

  • Ftp and http access over XDB repository is not allowed...

    When I try to execute the following command on a reasonably fresh Oracle 11 installation:
    insert into "XMLTEST" ( "name", "xmlfof" ) values ( 'small', DBMS_XDB.GETCONTENTXMLTYPE('/public/small.xml') );
    -- The schema is correctly registered, the file "small.xml" is in the /public repository folder, the user has every conceivable role and priviledge
    -- http access works fine from a remote location, tried to execute the command on the server and from remote system...
    I get the following error message:
    ORA-31020: Der Vorgang ist nicht zulässig, Ursache: For security reasons, ftp and http access over XDB repository is not allowed on server side ORA-06512: in "XDB.DBMS_XDB", Zeile 1915
    Searching for an answer on the forum didn't produce any concreate explanation... Does anyone have any idea how to solve this problem?

    As it turns out, the XML file contained a reference to a DTD at an external web-site, which caused the problem - it was identical to that described here:
    Re: ORA-31020 when using XML with external DTD or entities
    After removing the reference, everything works perfectly...

  • I was running Foxfire 3.6.9 and wanted to use FTP Program add-on and it did not appear to load but appeared but then would be installed but not run or appear under tools. So I deleted Foxfire 3.6.9 and down loaded to 3.5.9 so it could get FTP and it is do

    I was running Foxfire 3.6.9 and wanted to use FTP Program add-on and it did not appear to load but appeared but then would be installed but not run or appear under tools. So I deleted Foxfire 3.6.9 and down loaded to 3.5.9 so it could get FTP and it is doing the same could not install. Even after I registered my copy. The last time I used this program it showed up under tools and worked great. any suggestions on whats going on and how I can get around this?.by ralphd3g

    Delete the files extensions.* (extensions.rdf, extensions.cache, extensions.ini) and compatibility.ini in the Firefox [[Profiles|profile folder]] to reset the extensions registry.
    See "Corrupt extension files": http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
    If you see disabled extensions that are not compatible on the next start in "Tools > Add-ons > Extensions" then click the "Find Updates" button to do a compatibility check.

  • Difference between Seeburger FTP and OFTP adapters

    hi,
    Can anybody tell me the difference between Seeburger FTP and OFTP adapters?
    On what basis should one make a business decision as to which adapter to go for?
    Kindly help urgently.
    Regards,
    Loveena

    Hi ! Loveena
    Seeburger EDI Adapter provides an EDI solution on internet via HTTP or AS2 to replace the expensive VAN. It provides some pre-built mappings for IDOC to ANSI X12(810,850,855,856 etc.,) and Idoc to EDIFACT(ORDERS,DESADV,INVOIC etc.,) and has the ability to build your own. These pre-defined mappings transform the IDOC-XML to EDI-XML format.
    Seeburger Adapters are used to Connect the applications which are using Message protocol/Transport protocol as CrossIndustry(payment), VAN, OFTP, AS2(EDIINT), Generic and EDI based applications.
    Re: Seeburger Adapter
    Reg seeburger seeburger
    installation
    https://forums.sdn.sap.com/click.jspa?searchID=2268965&messageID=3210111
    OFTP ist a communication protocol. This has nothing to do with the format you have to transfer.
    regards the format you have to clear at which standard you have to transfer the messages. This can be any EDI format. At OFTP area the standard are often VDA or ODETTE.
    You can create this messages using different EDI adapters (of course also the mendelson adapter ).
    Regards OFTP you need additional software which handle the transfer based on the OFTP standard. Mostly you also need an ISDN card for using this protocol.
    We can support you with this software for OFTP transport too.
    More info also available at http://www.mendelson-e-c.com/.
    have a look at the ACTIS OFTP Adapter
    Ref: http://www.actis.atosorigin.de/solutions/en/ACTIS_solutions/SAPXI.php
    refer this thread also
    When we need Seeburger AS2 & FTP?
    XI Seeburger adapters
    Adapter for OFTP?!
    Thanks !!

  • Pull compressed file (.gz format) via FTP and place on Application server

    Hello!
    Greetings.
    We have a requirement where a compressed file in the format *.gz is to be pulled via FTP and saved to the application server after extracting.
    I searched the forums and found options to pull text or XL files, but nothing about pulling a compressed file. I wished to know if there is any process for the same. After pulling the file, it is to be saved to Application server after extracting. My doubts are as below:
    1. How to pull a *.gz file via FTP (Need batch processing)
    2. Can I extract and rename th file before saving it to applciation server? Or I need a temporary location to place the file before extraction?
    Any inputs are appreciated.
    Thanks,
    Shishir.

    Hi Sandra.
    Thanks for the confirmation.
    There is a change is the requirement. We need to Poll the FTP server for the file for the duration of one week every month.
    When the file is found, we are to take the *.gz file, extract and put on the application server.
    My question is how do we poll the application FTP server? I searched  the forums and found a few threads that say that an FTP adapter is to be setup for polling the FTP server and then we can schedule it using u201CAvailability Time Planningu201D.
    /people/shabarish.vijayakumar/blog/2006/11/26/adapter-scheduling--hail-sp-19-
    I wished to know if that is the only way to approach this requirement.
    Any help is appreciated.
    Thanks and Regards,
    Shishir.
    Edited by: Shishir Kinkar on Apr 26, 2011 11:07 AM

  • Stetting up FTP and SFTP adapters for the same interface

    Experts-
    I have a situation in which client has a requirement to setup both FTP and SFTP adapters (from adapetive adapters) for the same interface. They want to have a copy of file locally and also want a file to be sent out securly using SFTP. In my interface which was previously developed they have used one business system and added FTP and SFTP to the same. If try to add new Receiver Agreement it will say that the object already exists as the Interface Mapping is same.
    Please send me any suggestions which would resolve my problem

    Hi Hari,
    As you cannot create two Receiver agreement using only one receiver interface , please create a new receiver Interface, add that in interface determination step and then assing a different channel to new receiver agreement.
    If your requirement is to store the file ,i would suggest write the file in your unix directory using NFS( /usr/sap...). then run a AFT job (if already set up in your landscape) to transfer file securly to target destination.Not sure if its feasible in your case otherwise you can use  SFTP for the secure transfer.
    Best Regards
    Srinivas

  • Write/Read cluster with ftp and datasocket

    I try to save a cluster to a file on my RT-target from my host machine via ftp and datasocket. I can use the DS examples between host and target but when I connect a cluster to either DS Write or DS Read the VI stops with error 42 (Generic error). The help for DataSocket does not mention any constriction concerning the data type. Is this a bug or a feature?
    I found a workaround by saving the cluster to a local file and transferring this to the RT-target with FTP-VI's but the DataSocket solution would be much simpler.
    LabVIEW 8.6.1
    Attachments:
    clusterDS.jpg ‏24 KB
    Error42.jpg ‏12 KB

    Hi,
    I found the reason for the generic error: the file to write or read has to have a extension "dsd" (or "wav"), otherwise  you'll get the error. With a .dsd extension I was able to save the cluster. I have not yet managed to read it back but at least DS Read does not abort with the generic error. Interesting thing is if you use an other extension than dsd when writing, an empty file is actually created on the target system.
    Attachments:
    DSWriteCluster.vi ‏7 KB
    DSReadCluster.vi ‏10 KB

  • Doubt About FTP And NFS

    Hi Experts,
    1...What is the differnce between FPT and NFS( in Trasport Protocol)
    2...When we wil use FTP and NFS......In which Case
    Please Let me know in detailed
    Regards
    Khanna

    Hi Thanks for ur quick reply.
    As u told
    >>>><i>that the client's system is across ur network and the client is not ready to send u the file. At that time u have to use FTP.</i>
    This is ok.
    Q:::::And For this We should be in the VPN   OR No need?????/
    <i>In scenario where the XI system could store the file on their server (e.g. cases where the organization has their XI in place and they dont want to add an extra FTP server in their scenario, they can directly paste the file on the XI file system). In these cases NFS is used.</i>
    In this case u need to put the file in the XI Server, From where u wil get the file to keep it in the server(means via internet or by hand  or like.....)
    Please let me know all the details
    Regards
    Khanna

  • Passive FTP and the Leopard firewall

    Hi,
    We have an staff upload server that uses the built-in Leopard firewall. It is fed by two proprietary applications, one of which uses passive ftp only. We are getting a small number of incidents where the passive upload is unsuccessful. Initial contact is made (visible in the logs and as a connection in the server admin gui) but the upload doesn't proceed. A user might try uploading several times without success. On other occasions, the same user from the same computer has no problems at all.
    We have the ftp service enabled on port 20-21 and the FTP service PASV port range enabled 49152-65535.
    If I add the uploading computers' ip number to an access group with no port restrictions on the firewall, the uploads are always successful.
    With my very limited knowledge of ftp and firewalls, this suggest that the negotiated port for the data transfer is outside the default port range used by Apple. Is this likely? Are there any implications in changing the range?
    Or am I totally confused and should I be looking elsewhere?
    Thanks,
    Ross Glover

    By default, the FTP server doesn't restrict itself to any particular passive port range. To make it match what the firewall claims it should be, edit the file /Library/FTPServer/Configuration/ftpaccess and add the line:
    passive ports 0.0.0.0/0 49152 65535
    ...then restart the FTP service and retest.

  • Scripting with FTP and HTTP

    Hi All,
    To help us with future planning, we would like to get a feel for how many developers are using the FTP and HTTP objects that are available with scripting in CS3 (through webaccesslib). If you are using them could you send me a quick email describing how you use the component? My email address is [email protected]
    Thanks in advance.
    Alan Morris
    Dev Tech Engineer
    Adobe Systems

    Yeah, this is so aggrevating!
    Adobe builds all of these cool ideas, then doesnt test them.
    The HTTPConnection object does not do POST at all. I have tried nearly every possibility. The documentation is either way off or the object just does not work. I can see the post in raw form and the POST variables are not coming across.
    After working on this for a few hours i thought to myself, hey maybe i should just create a flash pane instead and load the files into it, then have the flash object upload. Well i ran into a big fat wall there too! As it is with patchpanel and bridge, these technologies only accept swf objects. This whole concept of using SWF and crossscripting has a huge flaw. The SWF file's security format does not allow for local file access for doing simple things like upload. If i can't synchronize file data to web based clouds, then i cant do much worth talking about.
    I love these products and their possibilities but i have to have the ability to communicate with the world. HTTP is the way!
    Also a side note, FTP is an insecure/inflexible solution and looks like a lot more time was spent on this aspect of the scriptable product.
    PLEASE HELP ADOBE!!!!!

  • Help w/FTP and manage site

    I am trying to get to my Comcast personal web site and I am
    trying to use Dreamweaver to create the site. When I login to the
    site on IE/FireFox useing the FTP address ftp://upload.comcast.net/
    I get in OK but in DW 8.0 I go to manage site and enter in all of
    the same info I use in IE/Fire Fox or even Front Page and I get
    that DW can not connect and the following Error:
    AN FTP Error occured. Cannot make a connection to host. The
    remote host cannot be found. If I try it on another commercial site
    I maintain and I get the same results. Is there a way to check my
    DW 8 to confirm it is working correctly?

    Please go to SITES | Manage Sites..., select the site name,
    and click on
    Edit. Click on the Advanced tab at the top. Tell me the
    following -
    Under LOCAL INFO
    The contents of "Local root folder:"
    Under REMOTE INFO
    What happens when you press Test?
    The contents of "Host directory:"
    Thanks!
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "tripleo" <[email protected]> wrote in
    message
    news:ej4vth$h0a$[email protected]..
    > Hi I am having a problem with FTP and Dreamweaver MX.
    >
    > I can log in correctly, the ftp connects to my webhost
    and everything is
    > fine
    > however when i want to upload a page or something for my
    site. it gives me
    > these errors:
    >
    > ERROR1
    >
    > dreamweaver cannot determine the remote server time.
    > the select newer and synchronize commands will not be
    available.
    >
    > ERROR2
    >
    > an FTP error occurred - cannot put FILENAME.
    > 500 Unable to service PORT commands.
    >
    > Can anybody help?
    >

  • FTPS and SFTP

    hi, what is the difference between FTPS and SFTP and does XI support FTPS and SFTP.  Please elaborate.
    krishnan

    Hi also have a look at this
    if u want to view the difference between FTPS (that XI supports) and SFTP, please refer this link
    http://www.enterprisedt.com/forums/viewtopic.php?p=136&sid=28d66491b43c6bf90448deea4936bc15
    HTTPS / SFTP with XI
    Hey have a look at the following also
    http://en.wikipedia.org/wiki/FTPS
    Thanks !!

  • Automator Service to Upload to FTP and Send Email With Links

    Hello.
    Since updating my client server machines at work to 10.7, the automator workflow that I have been using for years isn't working correctly.  Basically it's a simple workflow that uses upload to FTP action version 1.5 that uploads a video file to an FTp server, copies the links to the clipboard, creates new mail message and sends it.
    For some reason, it only does 1 file at a time now.  Interestingly, it uploads the files to the server but only sends the email with the first link this worked perfectly fine on 10.6  Before you could highlight 10 files and it would upload and send the links to all of them.
    Basically, I think it's the upload to FTP action that is causing the problems.  I need applescript to upload to the FTP and copy the url's and send the email.  See attached screenshot of the workflow.  I'm an applescript newbie so any help would be great.

    I don't know what is calling your function, but you should read the file before your call to the function and pass the contents as a byte array argument. You can process the byte array like you already do in your function.
    Regards,
    Marco

  • CS6, FTP and MySQL Connection ERRORs

    Adobe CS6 Dreamweaver
    I have the latest + updates of CS6 for Mac OS X 10.7.4.latest
    I can FTP, but files are not readable after the upload, on any web hosting provider.
    I have to use a thrid party FTP application (CyberDuck or Trnsmit) to make this happen.
    NOT HAPPY about this £2500 CS6 Master Collection spend not working !!!!
    When I try to connect via MySQL I get this error and failed actions:
    https://dl.dropbox.com/u/5485939/adobe_CS6_dreamweaver_FTP_MySQL/Screen%20Shot%202012-07-1 3%20at%2011.11.57.png
    https://dl.dropbox.com/u/5485939/adobe_CS6_dreamweaver_FTP_MySQL/Screen%20Shot%202012-07-1 3%20at%2011.11.45.png
    https://dl.dropbox.com/u/5485939/adobe_CS6_dreamweaver_FTP_MySQL/Screen%20Shot%202012-07-1 3%20at%2011.11.19.png
    I have checked the folders & content for ...
    _mmServerScripts
    Connections
    are uploaded properly (having to use a third party FTP application, see above).
    I have the correct logins details for FTP and MySQL, as other MySQL Apps (Sequel Pro) have no problem connecting to any web hosting proivdier for MySQL using the exact same login details.
    This is the same on my iMac or my MacBook Pro.

    Hello David, I am having this issue getting errors while trying to get my SQL to connect with the server. I clicked on the link you provided and I get a "you do not have permission to view this" message. Can you please share what ever solution that adobe has with me too.
    I am really really irritated with this issue, as someone else stated this is really inconvenient when I want to get some work done. I am also upset that I bought this software, especially if I cant find a solution.

  • Dreamweaver to CFB (FTP and other gripes)

    I 'get' the potential benefits of moving to CFB from Dreamweaver. I have watched all the videos and read the manual and I love the integration with Flex.
    BUT
    It appears very little thought has been put into the FTP and synchronisation tools..
    Ideally:
    I would like to set the destination FTP address for each project (at the moment although it asks me from the subdirectory, it shows me the top level root and I have to drill down each time for the destination where I want to upload)
    I don't want to see nor have editing capabilities on my remote files by default.
    Accidents happen and I'd rather they happened locally.
    Accidentally deleting a directory remotely could be disastrous.
    When the FTP client is busy, the rest of the IDE goes to sleep.  Dreamweaver sorted this out two versions ago.
    There appears no way to stop the interaction with the remote server.
    So until all these (pretty fundamental) issues get sorted. I ill probably use FB to play with CF9 and jump back to Dreamweaver to use their robust FTP tools.  (which just leaves me with the version control issues now that I have to put my FB source files into the wwwroot of my local server). Again a real pain !
    Has anyone else found these problems - or worked out how to get around them ?
    R8_UK

    R8_UK, I hear your concerns, and they're rather common. I hope I can address
    (and resolve) some of them here for you.
    First, I use the FTP feature all the time and it never makes the IDE
    "sleep". You may want to turn on the progress view (window>show
    view>other>general>progress). It will tell you what's happening as FTP
    processes are running. It will also tell you other processes going on in the
    editor. You may be surprised to find something else causing the "sleeps" you
    sense.
    As for you saying that "it shows me the top level root and I have to drill
    down each time for the destination where I want to upload", again I don't
    have that problem. Are sure you didn't just make a mistake in setting up the
    FTP connection? Admittedly, changing them is tough. You have to go to the
    File view, and there you'll see what FTP (or FTPS or SFTP) connections
    you've made.
    Or do you mean that you ARE using the File view, and it's when you open that
    that it makes you drill down? Well, you don't need to do that. You can
    instead connect your project to an FTP connection (either in the project
    properties and its synchronization section, or by just right-clicking
    anywhere in the project and choose Synchronize>Create New Synchronize
    Connection).
    If you do that, then it also solves a common complaint I hear from some,
    that it's complicated to do an FTP upload in CFBuilder. Well, I just right
    click on the file (or on the editor workspace to upload the file I'm working
    on, such as after changing and testing it locally), then choose
    Synchronize>Upload. Bang, done.
    There is also a more evolved "synchronize" feature that lets you do more
    (including comparing the contents of a file locally to remote, which comes
    in really handy). There's an even still more evolved interface in
    Window>Show View>Other>HTML Standard Views>Sync Explorer. The latter two
    come closer to the kind of two-paned interface for managing local/remote
    files that some expected in DW.
    Of course, different people have different desires for FTP access. You have
    said you do NOT want to edit the file directly on the remote server. I hope
    what I share above helps you. But those who DO like editing on the remote
    server (indeed, at their peril) will groan that they wish they didn't have
    to do even that simple manual effort to upload: they wish that on save it
    would upload. I don't know if we can ever expect that from within a local
    project in Eclipse. It just goes against the grain of better development
    practices, and it's one area where perhaps it's a good thing if the IDE
    pushes one to reconsider that.
    Until then, though, they can indeed use the File view, which does provide
    direct access to a remote server and its files. With that, you do open the
    remote file in the IDE and when you save it, it's pushed immediately to the
    server.
    Hope some of this helps you (and others) with your consternation with CFB
    and FTP. Come on in, the water's fine. (But I'll grant that's a relative
    statement. If you're still not sold, keep pointing out your concerns.)
    /charlie

Maybe you are looking for