FTPs and supported cipher

Hi,
I'm implementing a connection with a supplier using FTPs. They need to know what ciphers PI supports. According to SAP 'The application of FTPS follows specification RFC 4217'. That specification doesn't describe the cipher-suites that can be used. I've searched sap notes and can't find anything that describes the ciphers used.
Does anyone know what ciphers are available within PI, I'm on PI 7.0(2004s) SP13.
Thanks in advance.

Hello Rob
Firstly, you need to have the SAP Java Cryptographic library installed. See the link:
SAP Java Cryptographic Toolkit and Policy Jurisdiction Files
http://help.sap.com/saphelp_nw04s/helpdata/en/8d/cb71b8046e6e469bf3dd283104e65b/content.htm
You can also try checking in the Visual Administrator
VisualAdmin
-> Services
-> "Security Provider"
-> "Cryptography Providers"
I think the information on what cipher suites are used is stored in the SSL Provider Service -
http://help.sap.com/saphelp_nw04s/Helpdata/EN/8a/a7ca5cf214d246be16affcdef1ff03/content.htm
As a test you can select under the Dispatcher -> Services the SSL Provider and start the service. You now should get all the supported Cipher Suites.
Regards
Mark

Similar Messages

Difference between Seeburger FTP and OFTP adapters

hi,
Can anybody tell me the difference between Seeburger FTP and OFTP adapters?
On what basis should one make a business decision as to which adapter to go for?
Kindly help urgently.
Regards,
Loveena

Hi ! Loveena
Seeburger EDI Adapter provides an EDI solution on internet via HTTP or AS2 to replace the expensive VAN. It provides some pre-built mappings for IDOC to ANSI X12(810,850,855,856 etc.,) and Idoc to EDIFACT(ORDERS,DESADV,INVOIC etc.,) and has the ability to build your own. These pre-defined mappings transform the IDOC-XML to EDI-XML format.
Seeburger Adapters are used to Connect the applications which are using Message protocol/Transport protocol as CrossIndustry(payment), VAN, OFTP, AS2(EDIINT), Generic and EDI based applications.
Re: Seeburger Adapter
Reg seeburger seeburger
installation
https://forums.sdn.sap.com/click.jspa?searchID=2268965&messageID=3210111
OFTP ist a communication protocol. This has nothing to do with the format you have to transfer.
regards the format you have to clear at which standard you have to transfer the messages. This can be any EDI format. At OFTP area the standard are often VDA or ODETTE.
You can create this messages using different EDI adapters (of course also the mendelson adapter ).
Regards OFTP you need additional software which handle the transfer based on the OFTP standard. Mostly you also need an ISDN card for using this protocol.
We can support you with this software for OFTP transport too.
More info also available at http://www.mendelson-e-c.com/.
have a look at the ACTIS OFTP Adapter
Ref: http://www.actis.atosorigin.de/solutions/en/ACTIS_solutions/SAPXI.php
refer this thread also
When we need Seeburger AS2 & FTP?
XI Seeburger adapters
Adapter for OFTP?!
Thanks !!

Help w/FTP and manage site

I am trying to get to my Comcast personal web site and I am
trying to use Dreamweaver to create the site. When I login to the
site on IE/FireFox useing the FTP address ftp://upload.comcast.net/
I get in OK but in DW 8.0 I go to manage site and enter in all of
the same info I use in IE/Fire Fox or even Front Page and I get
that DW can not connect and the following Error:
AN FTP Error occured. Cannot make a connection to host. The
remote host cannot be found. If I try it on another commercial site
I maintain and I get the same results. Is there a way to check my
DW 8 to confirm it is working correctly?

Please go to SITES | Manage Sites..., select the site name,
and click on
Edit. Click on the Advanced tab at the top. Tell me the
following -
Under LOCAL INFO
The contents of "Local root folder:"
Under REMOTE INFO
What happens when you press Test?
The contents of "Host directory:"
Thanks!
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"tripleo" <[email protected]> wrote in
message
news:ej4vth$h0a$[email protected]..
> Hi I am having a problem with FTP and Dreamweaver MX.
>
> I can log in correctly, the ftp connects to my webhost
and everything is
> fine
> however when i want to upload a page or something for my
site. it gives me
> these errors:
>
> ERROR1
>
> dreamweaver cannot determine the remote server time.
> the select newer and synchronize commands will not be
available.
>
> ERROR2
>
> an FTP error occurred - cannot put FILENAME.
> 500 Unable to service PORT commands.
>
> Can anybody help?
>

FTPS and SFTP

hi, what is the difference between FTPS and SFTP and does XI support FTPS and SFTP. Please elaborate.
krishnan

Hi also have a look at this
if u want to view the difference between FTPS (that XI supports) and SFTP, please refer this link
http://www.enterprisedt.com/forums/viewtopic.php?p=136&sid=28d66491b43c6bf90448deea4936bc15
HTTPS / SFTP with XI
Hey have a look at the following also
http://en.wikipedia.org/wiki/FTPS
Thanks !!

Supported Cipher suites.

Hi All,
I am successfully communicating with the server using HTTPS with HttpsConnection from my J2ME Midlet. I am using APACHE as HTTP Server. However, the best cipher suite negutiated between the device and the server used by HTTPS was DES-CBC3-SHA. As you can see, it uses DES, which is not quite as secure as AES.However despite a lot of effort, i am just not able to get it to use an AES cipher suite. Is AES part of any supported cipher suite by MIDP? If not, can anyone tell me how i can enumeration the cipher suites supported on the MIDLet?
Thanks in advance
Edited by: AUTOMATON on Sep 14, 2007 3:38 AM

@superena,
Thanks for the links, but they actually dont give me the info I need. What I want to do is to find out how many SSL cipher suites are supported by J2ME. I mean if there is a list somewhere, of if i can write a program that can enumerate them for me..

Since I have update to Lion I have my print not scanning .My classic FTP not supported anymore

Since I have update to Lion I have my print not scanning,. My classic FTP not supported anymore!!!! what is goin on with this update??????

Recover the backup you made before you installed. If you didn't backup, make a backup down, and selectively recover pieces of the backup that will work with the older operating system after erase and reinstalling 10.6. See my backup FAQ*:
http://www.macmaps.com/backup.html
Before you do, you may find your scanner preferences in your printer just need to be set in the Print & Scan preferences in Apple menu -> System Preferences, or some open source scanner and printer drivers can work better*: http://www.macmaps.com/printersx.html
http://www.macmaps.com/macosxnative.html#SCANNER
And in the future ALWAYS backup your data before you install anything. That way you can recover where you went before. Don't cross post in the forum if you can avoid it. Remember this is a user to user forum, so responses may take awhile if you didn't post in an area that really is related to your question. Issues with Lion are best handled in the Lion forum. But as long as I have a chance, I'll respond to this thread.

NAS FTP and DYNDNS anyone?

my girlfriend has a NAS server attached to the router and wants access without having to run her laptop all day and night, which is the way I would want it.
Her router supports dyndns and we've forwarded port 21 to the NAS which has built-in FTP. The problem is when we access it over dyndns we get the http NAS configuration and not the shares!
so, we can access the shares directly over FTP with an FTP client or HTTP
and we can connect to the NAS over DYNDNS but only to the setup not to the shares.
anyone with an answer?

The NAS is a Buffalo Link Station 160 and the router is from Sphairon.
When we don't forward port 21 we get the router setup and I believe this is what is intended by the router, to remotely access and configure it. So it (almost) makes sense that we access the same level on the NAS when the port is forwarded via HTTP. Obviously if there were server software on the first IP (router) we would be there already, so I'm thinking the router is not forwarding for FTP correctly. Unfortunately the NAS device has only FTP and not HTTP built in.

Muse can't validate my domain name, FTP and folder....? when I try to upload it to Host FTP

When I try to publish my additions in Muse, an error message tells me that it can't validate my domain, FTP and server folder. Has anyone had this problem?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

HP Live Photo FAQ, Help, and Support

HP LIVE PHOTO
HP Live Photo app - available on iOS and Android devices
Make your photos come to life with HP Live Photo! HP Live Photo is a free, fun, and easy app for iOS and Android that lets you share your experiences with friends and family by creating photos that launch short personal videos on a smartphone or tablet.
Share your Live Photos with friends and family by printing, ordering prints from Snapfish (US only), and via Facebook or email.
For more information on HP Live Photo you can:
1. Watch this short video
2. visit the HP Live Photo app page.
To install the app:
iOS: App Store link Look in the Apple App Store for HP Live Photo.  Available in English only at this time.    Supports iOS 6.0 and above.
The app is designed for the iPhone, and can be run on the iPad2 and above and iPad Mini in 2X mode, and on the iPod Touch 5th generation.   If you want to install the app on your iPad2 or above, do not filter for apps that are designed for the iPad in the app store.
Android: Google Play Store link. Available in English only at this time. Supported at this time only on the following devices:
HTC One
HTC OneX
Nexus 4
Samsung Galaxy S2
Samsung Galaxy S3
Samsung Galazy S3 Mini
Samsung Galaxy S4
Samsung Galazy S4 Mini
Samsung Galaxy Nexus
Samsung Galaxy NoteII
Sony Experia Z
You'll find the following Help and Support information below:
FAQ - Frequently Asked Questions
Help Printing Live Photos
Troubleshooting Help for Creating, Sharing, and Viewing Live Photos
How to get more Support
FAQ
Can I see an example of what the app does?
Yes. Watch this short video, and the HP Live Photo also app includes a video and an example Live Photo you can print and view from the Live Photo app. Go to Settings and scroll down to the Tools section and select “Print a Sample” to print the sample Live Photo and then view it with the app.
If I have a question about my Snapfish Live Photo order, who should I talk to? (US only)
When you place a Snapfish order from the Live Photo app, you will receive an order confirmation from Snapfish to your email address. Review that email to confirm your order and contact Snapfish if your order appears to be late or does not arrive, or you have questions about the quantities you receive after your order arrives. Check your spam folder if you don't see the Snapfish order confirmation email in your inbox. If you need assistance from Snapfish and cannot find your confirmation email, here is the US Snapfish Help and Support page.
What iOS devices support Live Photo?
The iPhone, iPad2 and later, and iPad Mini, and iPod Touch 5th generation on iOS 6.0 and above. The app runs in 2X mode on iPad devices. Currently, HP Live Photo is supported in the US in English only.
Do I need an iOS or Android device to both create and view Live Photos?
Yes. Currently Live Photos may only be created and viewed on iOS or Android devices at this time.
Can I use any video in Live Photo?
You may use any video recorded on your mobile device using the video function, up to 45 seconds in length. If the video is longer than 45s, the HP Live Photo app will allow you to select a 45 second or less segment from the video.
Where are the Live Photo videos saved when I create a Live Photo?
The videos for your Live Photos are saved over the internet to the cloud. The original video on your device is not affected or modified in any way. HP Live Photo is not a video backup solution, so be sure to save images and videos using your own storage solutions. The live photo videos are not saved to your Facebook account.
When I share a Live Photo via email or Facebook is the video included in the email or post?
No. Only the Live Photo is included in the email or Facebook post. The video is only accessed from the cloud when the HP Live Photo app is used to scan a Live Photo.
If I print a Live Photo to give to family/friends, how will the recipient know how to view it?
The HP Live Photo app allows you to choose between printing just the Live Photo itself, or printing the Live Photo and a set of simple instructions for your recipient on 4x6 or 5x7 photo paper. The instructions explain how to install the HP Live Photo app and view the Live Photo.
Can I share my Live Photos with anyone?
Yes. You can share with any friends/family using a live photo nametag. Even easier, if you log into Facebook from the Live Photo app your Facebook friends are automatically enabled to view any live photos you share with them without having to enter your Live Photo nametag.
What is a Live Photo Nametag?
A Live Photo nametag allows you to share live photos with friends and family who are not a Facebook friend. The Live Photo app will prompt you to create your own custom nametag. This nametag allows Live Photo users who are not your Facebook friends to view your live photos.
Your nametag is printed on the bottom right corner of all your live photos. When you share your live photo with someone who is not a Facebook friend, they can simply enter your nametag in the nametag field on the View screen of the Live Photo app, and then view any of your live photos you share with them. This is a one-time operation - once your friend or family member enters your live photo nametag they will be able to view any of your live photos. Anyone who is a Facebook friends can view your live photos w/out having to enter your nametag.
How do I print a Live Photo from an iOS device?
You can print Live Photos from the Live Photo app on your iOS device in the same way you print other photos on iOS, using the built-in iOS Airprint feature. Airprint supports a range of printers from HP and other companies. If you need help with Airprint, follow the steps in “How do I send a print job using Apple AirPrint?” section in these instructions.
How do I print a Live Photo from an Android device?
Printing from Android devices is supported via the HP ePrint app, and is currently only enabled for HP printers. (See the next section for printing to non-HP printers or printers not supported by the HP ePrint app.) The ePrint app must be installed separately from the Live Photo app, and supports all web-connected HP printers released in the past several years and many legacy HP printers. If the HP ePrint app is not installed on your Android device you will be prompted to install it when you select the Print option in the Live Photo app. For more information see the HP ePrint app in the Google Play store.
Note on HP ePrint app Activation: After the HP ePrint app completes installing you will be prompted by the HP ePrint app to Activate it. You do not have to complete the “Activation” step in the HP ePrint app to print to your local wi-fi connected HP printers. HP ePrint app Activation is only required if you wish to print to HP web-connected printers on your HP Connected or HP ePrintCenter account, over an internet connection.
Once the HP ePrint app is installed, when you select Print from the Live Photo app the HP ePrint app will be automatically launched w/the live photo displayed and ready to print. All you have to do is select an HP printer on your wi-fi network, ensure you have photo paper inserted, and hit print.
Can I print from my Android device to non-HP printers and HP printers that the ePrint app does not support?
Yes. There are some third-party printing apps available for Android devices in the Google Play store (one example is Printershare). If your HP printer is not supported by the HP ePrint app, or if your HP printer compatible is not compatible with the HP ePrint app, you may be able to use a third-party print app to print your HP live photos.
Send the photo to yourself via the Share via email option from Live Photo. Then open the email on your phone and tap on the photo when it displays after downloading. Select the Android Menu option and choose Share. Your print app should appear on the Share list. Select the print app and complete your print as you normally do using that app.
Can I print Live Photos from my computer?
Yes. Simply share your photo via email from the Live Photo app to your own email address and then open the email and print the live photo as you normally do from your computer. You can print live photos from your computer to any printer you have attached to it that supports photo printing.
Can I print Live Photos on plain paper?
Always print Live Photos on photo paper to provide the necessary color, saturation, and depth for the best Live Photo experience. You may have success printing on plain paper, but results will be much less predictable.
Do I need a Facebook account to use HP Live Photo?
Viewing: No. A Facebook account is not required to view live photos using the Live Photo app.
Creating: No. A Facebook account is not required to create Live Photos. You can create and share them using your Live Photo Nametag. However: If you create live photos without logging into Facebook, we cannot make your live photos available to you in the Live Photo app on other devices. Any live photos you create on a device using just a Live Photo nametag will be added to your Live Photo gallery and available on other devices if you sign into the app using Facebook.
Do I need an internet connection to use this app?
Yes, HP Live photo requires an internet connection for launch/use.
I played the introduction video in the app but why is there no sound – what’s wrong?
Make sure that you have sound enabled on your iOS device...if you are set to virbrate mode you will not hear audio with the video.
How can I provide feedback on Live Photo features that I’d like added or changed?
In the HP Live Photo app, select Settings and scroll down to the Send Feedback option. We would love to hear from you! Note that this option is for feedback and is not monitored for support questions. For support questions see the
Printing Live Photos, Troubleshooting, and Support sections below.
I am having an issue with the HP Live Photo app – where can I get help?
See the Printing Live Photos and Troubleshooting sections below. If you can’t find what you need and would like to contact HP Live Photo support, see the Support section below.
PRINTING LIVE PHOTOS
Always print Live Photos on photo paper to provide the necessary color, saturation, and depth for the best Live Photo experience.
You can print from your iOS device on 4x6 or 5x7 photo paper using Airprint if you have an Airprint compatible printer.
You can print from your Android device on 4x6 or 5x7 photo paper via the HP ePrint app if you have an HP wireless/Ethernet connected printer.
Printing Live Photos shared via email on an iPhone/iPad using Airprint:
Long-press on the image in the email and select “Save Image” from the pop-up list of options and select the Save option.
Go to your Camera Roll and open the image.
Ensure you have 4x6 or 5x7 photo paper in your printer’s photo paper tray, or main tray if you do not have a separate photo paper tray, select the Action icon and choose the Print option.
If you need help with Airprint, follow the steps in “How do I send a print job using Apple AirPrint?” section in these instructions
More information on Airprint:
- HP Airprint support forum discussion thread: Click here.
- All Airprint enabled printers: http://support.apple.com/kb/HT4356
Printing Live Photos shared via email on an Android device (requires HP printer):
Tap on the image in the email to open the image.
While viewing the image, select Menu>Share
Select the HP ePrint app as the share target, or another print app that you prefer to use if you have one installed. If you select another print app, complete the print as you normally do.
If you select the HP ePrint app it will open displaying the image – select Print in the HP ePrint app to print the image. Ensure you have 4x6 or 5x7 photo paper in your printer’s photo paper tray, or main tray if you do not have a separate photo paper tray, and select either 4x6 or 5x7 print size in the HP ePrint app settings.
More information on the HP ePrint mobile app.
HP ePrint mobile app FAQs: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01923321
Printing Live Photos shared via email on PC and Mac:
You can also use the Email option to send a Live Photo to yourself, open the email on your computer and save and print the photo as you normally print photos on your computer.
On a PC, right-click on the photo in the email and select the Save option.
On a Mac, see this information.
If you need additional help printing photos from your PC, Click here.
Printing Live Photos shared via Facebook:
It’s usually easiest to save the photo from Facebook and then print it on your computer or device.
Computer: Select the photo and select “Options>Download” to save the photo to your computer.
Mobile: Long-press on the photo and select “Save Photo” to save the photo to your device.
After saving the Live Photo print it as you normally print on your computer or device.
Printing Photos Directly from Facebook on Your Computer:
You may also want to try the HP Facebook Photo and Album printing option to print live photos from Facebook shares.
However, it may be simpler to save and print the photo from your computer or device using a process that you are more familiar with.
https://apps.facebook.com/hpprint/
TROUBLESHOOTING
Create:
Can I change the images that the app pulled from the video for the Live Photo?
It is not possible to directly select a specific frame of the video to print as the Live Photo. You can try the refresh button in the upper-right corner of the “Choose Image” screen to re-scan your video.
What can I do if the HP Live Photo app is unable to find an image in my video for the Live Photo?
The most likely reason for not finding an appropriate image to print for the Live Photo is that the content of the video does not provide enough contrast. For example, a video of a white dog walking on the sidewalk, or black dog walking on asphalt. The best way to try to resolve this issue is to shoot the video with more lighting to increase the contrast. You can also try to include a few “still shots” in the video where camera and subject movement is minimized.
What if I don’t want to share the entire video?
After you select your video, you can use standard iOS video trim functions within the HP Live Photo app to choose your desired begin and end points.
What if my video is longer than 45 seconds?
The HP Live Photo app will display the video trim controls automatically with a 45 second segment selected so you can choose what portion of the video to include.
Can I use a video from another source?
HP Live Photo currently only supports videos created on your iOS device.
It’s taking a very long time to save my Live Photo project. What can I do to speed it up?
Saving the project requires uploading both the video clip and the photo, and completing several tasks in the cloud to link the Live Photo to the video. Depending on the length of your video and the speed of your internet upload connection (which can vary significantly over time), this can take several minutes.
If you are on Wi-Fi and the save is taking more than five minutes or not completing, try changing to 3G or 4G, which usually have faster upload speeds than home or public Wi-Fi connections. (Data charges may apply.) You can also try using a shorter video clip.   (If you are interested, you can use services like www.speedtest.net to test your Wi-Fi and 3G/4G upload speeds.)
How do I view or share Live Photos I’ve already created?
Select the Live Photos option (icon looks like a small stack of photos) in the Live Photo app to view the Live Photos you have created. Select one of them to view the photo and choose a print or share option.
How do I delete a Live Photo from my list of saved Live Photos?
iOS: Go to the Live Photo tab and slide your finger left-to-right on the Live Photo you want to delete. A “Delete” button will appear – select it to delete the photo.
Android: Select the Live Photo icon (at the top of the Live Photo app, looks like a stack of photos) to view your live photos. Long press on a live photo a context menu will appear with Delete and Share options. Select the Delete option.
Share
I’m having problems printing a Live Photo that was shared to me.
See the Printing Live Photos section above for general information and assistance with printing HP Live Photos.
Can I use the app to view a Live Photo on my computer screen?
Yes. If you share the Live Photo via email or Facebook, recipients can use the HP Live Photo app to view the Live Photo on screen and see the video. Results can be affected by the monitor display resolution and type, as well as ambient lighting.
My friend doesn’t have an iOS or Android device. Can I share my Live Photo with her?
At this time an iOS or Android device is required to view the videos associated with your Live Photos.
I just need the viewing instruction sheet – how can I print that?
Go into app Settings and scroll down and select the “Print Instructions” option. If you prefer not to print the instructions on 4x6 or 5x7 media, remove photo media from the photo tray before you send the print.
View:
I have a Live Photo that does not play when I view it through the HP Live Photo app. What’s wrong?
Below are some reasons why this could occur:
The photo is not an HP Live Photo. Look for the small blue icon of a bird in the lower-right corner of the photo to confirm it is a Live Photo.
The person who created the Live Photo must be either one of your Facebook friends, or you must connect to them by entering their nametag (printed on the bottom-right of the live photo) in the View screen in the Live Photo app.
The Live Photo needs to be printed on photo paper for best results.
Ensure sufficient light is available for viewing, and minimize any glare or shadows on the photo.
The creator of the Live Photo may have deleted the Live Photo project from their app. Contact them to confirm it is still available.
An internet connection that is too slow/unstable.
Can I view Live Photos with other augmented reality apps?
No. HP Live Photo requires the HP Live Photo app to view the images and display the video.
SUPPORT
If you are unable to find an answer to your question in the FAQ, Printing Live Photos, and Troubleshooting sections above, you can get support via email for the HP Live Photo application at the following email address:
[email protected]
To ensure a quick resolution of your support question, please provide:
A clear subject line - e.g., “Live Photo – printing problem”
A complete description of your problem – what you are trying to do and what is going wrong.
What iOS mobile device you are using
Your printer make/model
Note that we do not have the necessary information to provide support for photo printing on non-HP printers.
I am an HP employee.

Connybelle wrote:
My HP Photosmart 5514 is set up on wireless. It will not let me print a picture from my computer. No matter what I do, it tells me to insert a memory card. I want to print what is in my pictures on the computer. Any ideas?
If you're trying to print from your computer to your printer via wireless, you have a basic printing question...You can get help for those types of questions in this forum:
http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/bd-p/PostPrint
I am an HP employee.

What is up with the Help and Support Section for Business Catalyst?

It has been very difficult for my customers and myself to access the help and support section of the site for Business Catalyst issues as we are constantly diverted to non-related Abode issues. The portal for support on Business Catalyst issue needs to be ISOLATED from ADOBE's main support section. It is bad enough that there are so many issues to deal with, but to add all the issues for all the applications is simply impossible to decipher and discover a solution.
Before the Adobe integration on the Cloud services it was much more simpler, wiith a much more efficient and cleaner layout, now every page looks like its generated by a bot that doesn't understand what I am looking for. Even the actual URL of the page is hidden so I can't even book mark it without opening the frame in a new window. My clients will not know how to do that.
Simplify plesase!
Teejay

Teejay,
Yes we are looking into this very thing and hope to improve this very soon. Not only making things a bit clearer but also a central location for all your BC support needs.
Kind regards,
-Sidney

Unable to open "Help and support"

When i click on help and support i get the error message:
"Internet explorer cannot download / from help"
How do i fix this?

Ahh.. i know how to solve that.. This problem happens when the default application which is assigned for .xml files is replaced with another one (which is trying to downlod help files, obviously). Download this reg key that will restore default values in your registry.
http://www.sendspace.com/file/xmrpjn
Goodluck!

All of a sudden, my ipod touch will only recognize/play purchased items. I then have to completely reset the ipod and re-sync. I've had to do this 6 times, and support has been no help.

All of a sudden, my ipod touch will only recognize/play purchased items. I then have to completely reset the ipod and re-sync. I've had to do this 6 times, and support has been no help.

So you also rebooted your router correct? Does the iPod still connect okay to other networks?
B-rock

An error ocurred during the installation of assembly 'Microsoft. VC80.crt,type="win32", version="8.0.50727.4053".publickKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="amd64".Please refer to help and support for more information. HRESULT: 0x80071A30

An error ocurred during the installation of assembly 'Microsoft. VC80.crt,type="win32", version="8.0.50727.4053".publickKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="amd64".Please refer to help and support for more information. HRESULT: 0x80071A30
Instale iTunes perfectamente, conecte mi iPone y me dijo que necesitaba otra version que borrase la actual y instalase la nueva, borre la que tenia, y al instalar la nueva me salia esto y no tengo forma de instalarla. Ya hice los tutoriales de la pagina, y nada.

OK. If both of you are Windows 7. Make sure you go to Windows update (START button, type in Windows Update). Check for updates and update whatever that are available. (especially Microsoft .NET Framework 4 )
After that see if you still get this error message.
The last resort would be to unistall and reinstall the whole thing.
Follow the steps below:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

ITunes Installation error: "Microsoft VC80.CRT.TYPE="win 32".version=8.0.50727.6195".publicKeyToken='1fc8b3b9a1e18e3b".processorArchitec ture "x86"".Please refer to help and support for more information. HRESULT:0X800700C1

Hi!
I am trying to install iTunes on my laptop that runs Windows 8.1
I have tried several solutions discussed in similar questions but none worked
-uninstalled and reinstalled
-cleaned C drive for all Apple products
-tried to install security update’ Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update’ but the same error appeared
-Windows module installer is enabled
I always get this error
an error occured during the installation fo assembly "Microsoft.VC80.CRT.type="win32", version="8.0.50727.6195, public key token=,1fc8b3b9a1e18e3b", processor architecture="x86", please refer to help and support for more information. HRESULT: 0x80070422
If i ignore and proceed another error appears
Service 'Apple Mobile device' failed to start. Verify that you have sufficient privileges to start system services
If i ignore one more time, itunes is installed but when i try to run it
Apple application support was not found. Apple Application Support is required to run iTunes Helper- please uninstall iTunes and then install itunes again-error 2
Can someone help me please? Thank you!

Hi M2i7guel,
Welcome to Apple Support Communities.
It sounds like there is an issue installing iTunes and other Windows updates on your PC. The article linked below provides troubleshooting suggestions that will resolve most issues like the one that you've described.
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
I hope this helps.
-Jason

An error occurred during the installation of assembly 'policy e0.Microsoft.VC80.CRT.type="win32-policy" version "8.0.50727.4053", publicKeyToken="1fc8b3b9a1e18e3b" ,processorArchitecture="amd64"'. Please refer to Help and Support for more information. H

An error occurred during the installation of assembly 'policy 80.Microsoft.VC80.CRT.type="win32-policy" version+"8.0.50727.4053", publicKeyToken="1fc8b3b9a1e18e3b" ,processorArchitecture="amd64"'. Please refer to Help and Support for more information. HRESULT: x...
Encountered during reinstall of iTunes. Any ideas?

It is a big issue for many users. There is no clear fix yet, but some users have had success with some of the solution on this thread.
https://discussions.apple.com/message/16751339#16751339

FTPs and supported cipher

Similar Messages

Maybe you are looking for