FTPS file adapter setup fields not visible after SP13 install
After installation of SP13, I was looking for file adapter FTPS setup (fields described in SP13 release notes). I could not see any. It's just like the old adapter.
Java cryptolib is installed, and we checked it is there.
we recycled the whole thing.
Any idea what could be missing ?
Solved. We had applied SP12 file.
Note that this originates from the SP stack download tool.
We had followed the generic download process and it did not contain the SP13 tpz file.
I tried again this morning, when selecting source sp11 target sp13, The selection of packages selects
SAPBASIS12_0-10002900.zip... and not the SP13 one.
Watch out if you move two SP up !
Detailed solution :
Downloaded the SP13 zip file. the following way.
service.sap.com download/entry by app grp/sap content
process integration (XI content)/ XI_CONTENT_SAP_BASIS/ XI_CONTENT_SAP_BASIS_6.40/DB independant/ selected sp13 from the list
Unzipped, and put the tpz file in the import directory
of the repository. file name is XI3_0_SAP_BASIS_6.40_13_02.tpz
Imported it
And it works now
Thanks a lot for your help.
Similar Messages
-
Fields not visible after replication ?(hide tick removed)
Hi experts,
I have added fields from LO communication structure to extract structure and i have removed the Hide option in maintain datasource.When i am replicating in BI those fields are not visible.What is the reason?
I am eagerly waiting for reply.
Regards,
lapHi Lap,
U can delete the data source in RSA6, u can activate again from RSA5,
Here u dont need to do any setup tables, u will get the enhanced fields with Hide Mark,
U have to remove the Hide tick and Replicate ..
U will get the added fields in BI then u map the transformation
I have done this once It works fine
Assign points if it Helpful to you,
I appreciate Geo quick Response..
Regards,
SHAIK -
Photosmart 7760 drivers not visible after manual install, blocking network access
Hello --
I have an HP Photosmart 7760 installed and working on a Mac Mini connected to a wired ethernet LAN. The printer has been configured to be shared by the Mac and I am able to print to it from other Macs. However, I am unable to install this shared network printer on Windows XP despite being otherwise able to connect to the Mac Mini from the XP machine.
When going through the Add Printer wizard on XP, I am able to browse to and see the printer on the Mini. After double-clicking the printer, I get:
You are about to connect to a printer on MINI, which will automatically install a print driver on your machine. Printer drivers may contain viruses or scripts that can be harmful to your computer. It is important to be certain that the computer sharing this printer is trustworthy. Would you like to continue?
I click Yes and then get:
The server for the printer does not have the correct printer driver installed. If you want to search for the proper driver, click OK. Otherwise, click Cancel and contact your network administrator or original equipment manufacturer for the correct printer driver.
I then click OK and browse through the list of printer manufacturers to HP, but don't see any Photosmart printers in the printer list (lots of Deskjets, Paintjets, Officejets, etc).
I have downloaded and installed the XP drivers by hand, (HP Photosmart Printer Software and Driver version 5.3 from http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=228&lc=en&cc=us&dlc=en&product=305375.) However, I still am not able to see the appropriate driver
My questions:
1. Is there an alternate way to install these drivers (e.g. via the Have Disk button) such that they will appear in the above printer list?
2. If not, is there an alternate printer I can use that will work from XP with a network-attached 7760?
3. Barring the above, are there any other things anyone can recommend I try in order to resolve this?
Thanks!
Regard,
RamonHello thecousin,
you have tried a lot of things and if you are sure that the problem is not hardware (sometimes even when the lights are blinking there might be a problem with the hardware itself) i recommend you to do the following:
1. Try to reinstall the network driver (download new/latest one from Lenovo.com) and see if this could help.
2. Try to think of any software you have installed prior to the problems... some software might be affecting your network settings/connections
3. Sometimes i have seen problems with the windows "services" so you might have a look there (it is in the control panel/administrative tools/services) and see what is started and what isn't
4. Well the last one would be to reinstall the OS
Good Luck
Delfy -
HDD not visible after SSD install
I installed a Crucial M4 SSD into my late model 2011 macbook pro. I originally had intended on it living in the optical drive bay until I read the numerous threads about how the SSD can't be used to it's full potential in that place. So, I swapped the HDD into the optical drive bay and placed the SSD in the old HDD bay. When I booted this am, it booted fast into the SSD, but now I can't see the HDD in disk utility or on an 'option' startup. Any help appreciated! Hope Kappy is out there today!
I hear the fans running, so I'm assuming it's trying to spin the HDD perhaps?
Thanks,
Jarrodnevermind I got it! connecter had come loose. boy i feel silly :-/
-
How to Create a Flat File using FTP/File Adapter
Can any body done workaround on creating the Flat file using FTP/File Adapter?.
I need to create a simple FlatFile either using of delimiter/Fixed length. using the above said adapters we can create XML file, i tried concatinating all the values into a single String and writing into a file, but it does not have proper structure
Can any body help me out on this..
Thanks
RamYou can create a text schema while creating a File Adapter. If schema is specified for File Adapter, it takes care of converting XML into fixed length or delimited format.
Thanks,
-Ng. -
Hello,
I am using FTP - file adpter receiver in which Data conncetion is is Active. When I ran scenario I got following error on FTP file adapter.
11.04.2008 16:11:53 Success Connect to FTP server "CorpFTP.UHC.COM", directory "/ftp/418p/put"
11.04.2008 16:11:54 Success Write to FTP server "CorpFTP.UHC.COM", directory "/ftp/418p/put", file "FREEMANF.U.200804111610.gsf.pgp"
11.04.2008 16:11:54 Success Transfer: "BIN" mode, size 368397 bytes, character encoding -
11.04.2008 16:11:56 Success Connect to FTP server "CorpFTP.UHC.COM", directory "/ftp/418p/put"
11.04.2008 16:11:56 Error Attempt to process file failed with java.net.SocketException: Connection reset
11.04.2008 16:11:56 Error MP: exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Connection reset: java.net.SocketException: Connection reset
11.04.2008 16:11:56 Error Exception caught by adapter framework: Connection reset
11.04.2008 16:11:56 Error Delivery of the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Connection reset: java.net.SocketException: Connection reset.
11.04.2008 16:11:56 Success The asynchronous message was successfully scheduled to be delivered at Fri Apr 11 16:16:56 CDT 2008.
11.04.2008 16:11:56 Success The message status set to WAIT.
I also tried with Passive Data Connection without any success. I got following error when I tried with passive data connection.
11.04.2008 16:02:23 Success Connect to FTP server "CorpFTP.UHC.COM", directory "/ftp/418p/put"
11.04.2008 16:02:23 Success Write to FTP server "CorpFTP.UHC.COM", directory "/ftp/418p/put", file "FREEMANF.U.200804111600.gsf.pgp"
11.04.2008 16:02:23 Success Transfer: "BIN" mode, size 368397 bytes, character encoding -
11.04.2008 16:02:23 Success Connect to FTP server "CorpFTP.UHC.COM", directory "/ftp/418p/put"
11.04.2008 16:02:24 Error Attempt to process file failed with com.sap.aii.adapter.file.ftp.FTPEx: 425 Can't open passive connection.
11.04.2008 16:02:24 Error MP: exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Can't open passive connection.: com.sap.aii.adapter.file.ftp.FTPEx: 425 Can't open passive connection.
11.04.2008 16:02:24 Error Exception caught by adapter framework: Can't open passive connection.
11.04.2008 16:02:24 Error Delivery of the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Can't open passive connection.: com.sap.aii.adapter.file.ftp.FTPEx: 425 Can't open passive connection..
11.04.2008 16:02:24 Success The asynchronous message was successfully scheduled to be delivered at Fri Apr 11 16:07:24 CDT 2008.
11.04.2008 16:02:24 Success The message status set to WAIT.
I also tried ftp directly fron the XI server using command line and also using winftp utility. In both cases I was successful to ftp the file. The ftp server says we need to run in only active connection mode.
I wonder if any one experienced same problem and how was it resolved? I appreciate your help.
Thank you,
BalajiSrini,
Thank you for the reposne. THe Q.26 is as follows.
Q: I have configured a File Adapter channel to connect to an FTP server, but receive one of the following error messages in the adapter monitor:
Error connecting to ftp server '<hostname>': SocketException: Connection reset
Error connecting to ftp server '<hostname>': SocketException: Connection refused
Error connecting to ftp server '<hostname>': ConnectException: Connection timed out
A: This problem is either caused by incorrect firewall / packet filter settings or an incorrect configuration of the FTP server. Also make sure that you have correctly specified the host name / IP address and port of the FTP server.
Changing the connection type from 'active' to 'passive' (or vice versa) might additionally help to work around the incorrect firewall configuration.
I was successful in transmitting file via ftp from XI box without any issues. If there are fire wall issues,command line ftp shall fail. I also verified that the file size is good after transmission. I have tried with both active and passive mode without any success.
By the way I have about 6 other ftp communication channels configured and working correctly from the XI box. Please let me know if you want me know.
Thank you,
Balaji -
How to know file name in FTP/file Adapter
Iam new to FTP/file Adapter,
when ever we use ftp/file adpter,
afrter pick file from remote server/local system.
how can i fine filename,?
how can handling a fault,if file picked,but data is wrong ?
How we know the picked date, time of that picked file ?
please give me solutionCheck this : http://docs.oracle.com/cd/E25178_01/integration.1111/e10231/adptr_propertys.htm#CHDJBDHC
Search for this topic : Table A-5 JCA Properties for Oracle File Adapter: Normalized Properties.
After the file has been picked up, you can easily fetch the file details using "jca.file.FileName" etc (see above).
Rest should be dealt by you, depending upon the scenario you have.
HTH -
EOIO service on Receiver FTP/File Adapter
Hi,
I have a scenario where I would like the sender adapter to be quality of service, EO (Exactly Once), and the receiver ftp/file adapter to be of quality of service, EOIO (Exactly Once in Order). Is there a way to change the quality of service on the receiver adapter only so that it differs from the sender adapter?
Thanks in advance.
Best Regards,
DukeHi,
Unfortunately changing the QoS in the adapter module does not solve the issue. The message appears to be put into the queue prior to the module being called. Below is the audit log.
2007-10-26 09:58:30 Success Using connection AFW. Trying to put the message into the receive queue.
2007-10-26 09:58:30 Success Message successfully put into the queue.
2007-10-26 09:58:30 Success The message was successfully retrieved from the receive queue.
2007-10-26 09:58:30 Success The message status set to DLNG.
2007-10-26 09:58:30 Success Delivering to channel: XXXXXXX
2007-10-26 09:58:30 Success ChangeQoS: Module called
2007-10-26 09:58:30 Success File adapter receiver: processing started; QoS required: ExactlyOnceInOrder
As you can see the QoS has been changed to EOIO from the adapter module, but the message is still in Qos EO.
Am I missing something or is there another way this can be achieved? Can we do this in the mapping somehow before it ever gets to the AFW?
Thanks in advance.
Best Regards,
Duke -
Portal content not visible after installation nw2004s
Hello
Portal Content folders not visible after logon to EP after installation
using the url http://172.22.218.120:50400/irj
logon is using Administrator id.
top level navigation is displayed. but no folder hierarchy in PCD.
Please help
regards
JohnHello John,
Used the host name instead of the ip address in the url http://<host name>:50400/irj/portal.
Maintain the host name in the host file of the OS.
ip address host name.
Regards
Deb
[Reward Points for helpful answers] -
LM13: Verification field not cleared after [Enter] key
Hi Experts,
I'm facing the issue as stated in the OSS note 916654 - LM13: Verification field not cleared after [Enter] key. My current system is ECC, that is why the OSS is already applied to the ECC version. But the problem is, i still faced the problem stated in the OSS.
Symptom
In customizing:
- You have defined [ENTER] in destination screen 302 to SAVE items.
- You want to verify the destination bin information.
You use 'Confirm Transfer Order Clustered' RF transaction LM13.
You scan several SUs and press enter.
You press [F4-Next pushbutton] to confirm the associated TO(s).
In the destination screen 302, you scan the verification value for the first item and press [ENTER] key.
==> The item is confirmed correctly but when the system proposes the next item, the verification value of the first item is displayed.
Anyone know how to fix this issue? Pls help.
thanks
Hooi FungHi,
For example itab-matnr is your screen field
in PAI
field: itab-matnr,
module check_matnr_0700.
module check_matnr_0700 input.
move itab_matnr to v_matnr.
endmodule.
in PBO.
move v_matnr to itab-matnr.
a® -
NEF files from Nikon d800 not visible in bridge and photoshop cs6- using mac ver.10.8.5. downloaded plugin from site 8.3 but issue unresolved
You can install and use Camera Raw 8.8 with OSX 10.8 Go to Help > Updates in Photoshop CS6
-
Note 916654 - LM13: Verification field not cleared after [Enter] key
Hi Experts,
I'm facing the issue as stated in the OSS note 916654 - LM13: Verification field not cleared after [Enter] key. My current system is ECC, that is why the OSS is already applied to the ECC version. But the problem is, i still faced the problem stated in the OSS.
Symptom
In customizing:
- You have defined [ENTER] in destination screen 302 to SAVE items.
- You want to verify the destination bin information.
You use 'Confirm Transfer Order Clustered' RF transaction LM13.
You scan several SUs and press enter.
You press [F4-Next pushbutton] to confirm the associated TO(s).
In the destination screen 302, you scan the verification value for the first item and press [ENTER] key.
==> The item is confirmed correctly but when the system proposes the next item, the verification value of the first item is displayed.
Anyone know how to fix this issue? Pls help.
thanks
Hooi FungThanks a lot for your prompt answer. Well yes if i clear in the PBO the value gets cleared, but then i wanted to get the next records value into the value field, well the problem got solved in a much easier way i put everything into one chain endchain statement.
-
Google toolbar buttons (other then print) are not visible after installing Firefox 4 for Mac.
Yes - there is a fix... called IE9... http://windows.microsoft.com/en-US/internet-explorer/downloads/ie-9/worldwide-languages
-
Autocad 2010 drawing pasted in microsoft excel 2007 spread sheet not visible after converting excel
Hello, I am having an issue with Autocad 2010 drawings not showing up in a pdf document. Normally, I cut and paste part of an Autocad 2010 drawing into a Microsoft Excel 2007 spread sheet. Then, using Adobe Distiller, I convert the Excel spread sheet into a pdf document for propriatary purposes. However, recently the drawing pasted into Excel will not fully appear on the pdf, the drawing is cut off past a certain point. The drawing will print normally in Excel, but in pdf will not print normally. If the drawing is shrunk below the "cut off" point, it appears normally. If the drawing is expanded above the "cut off" point, any additional image is lost. Any suggestions on how to fix the problem would be appreciated.
See "[Creating, Editing & Exporting PDFs] How to correct bad PDFdisplay
of Excel 2007 graph-Adobe ProX?" and similar discussions. Are you
scaling it to less than 100%?
Jeffry Calhoun
Workforce Analytics Manager
Ohio Department of Job & Family Services
P.O. Box 1618, Columbus, OH 43216-1618
InterAgency: F376, 4020 E. 5th Avenue
614-644-0564
Fax 614-728-5938
[email protected]
OhioMeansJobs.com -
The next best thing to having an HR department.
OhioMeansJobs.com -
Ohio's premier website for connecting businesses and job seekers -
quickly, easily, and for free!
>>> jblairdynis <[email protected]> 4/19/2012 10:44 AM >>>
autocad 2010 drawing pasted in microsoft excel 2007 spread sheet not
visible after converting excel created by jblairdynis (
http://forums.adobe.com/people/jblairdynis ) in Creating, Editing &
Exporting PDFs - View the full discussion (
http://forums.adobe.com/message/4346704#4346704 )
Hello, I am having an issue with Autocad 2010 drawings not showing
up in a pdf document. Normally, I cut and paste part of an Autocad 2010
drawing into a Microsoft Excel 2007 spread sheet. Then, using Adobe
Distiller, I convert the Excel spread sheet into a pdf document for
propriatary purposes. However, recently the drawing pasted into Excel
will not fully appear on the pdf, the drawing is cut off past a certain
point. The drawing will print normally in Excel, but in pdf will not
print normally. If the drawing is shrunk below the "cut off" point, it
appears normally. If the drawing is expanded above the "cut off" point,
any additional image is lost. Any suggestions on how to fix the problem
would be appreciated.
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page:
http://forums.adobe.com/message/4346704#4346704
To unsubscribe from this thread, please visit the message page at
http://forums.adobe.com/message/4346704#4346704. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in Creating, Editing & Exporting PDFs by email (
mailto:discussions-community-acrobat-creating__editing_%[email protected]
) or at Adobe Forums (
http://forums.adobe.com/choose-container!input.jspa?contentType=1&containerType=14&contain er=4697
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746.
Ohio Means Jobs
You're looking for something unique. Use more than an ordinary site.
http://www.ohiomeansjobs.com
This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain private, confidential, and/or privileged information. Any unauthorized review, use, disclosure, or distribution is prohibited. If you are not the intended recipient, employee, or agent responsible for delivering this message, please contact the sender by reply e-mail and destroy all copies of the original e-mail message. -
SHCess field not appearing after using utilization tab in excise invoice
Dear All,
SHCess field not appearing after using utilization tab in excise invoice.The other fields and values releated to SHCess are appearing.
Please give the inputs.
Regards,
deeptiissue resolved
Maybe you are looking for
-
My computer isn't communicating with my HPDeskjet3054A. I turned it off and now the wireless light is flashing. HELP
-
Issue on Adobe Flash Player 11.5.502.110
Hi all, At every update of this ** flash player pug in, I have an issue : flash contents is not available in the next couple of weeks. And then the issue occurs an a low frequency. I don't know how to start with this. Re-installation and explorer u
-
Safari unexpectedly quitting ALL the time?
Over the past few Months, Safari has just been unexpectedly quitting. I may have just opened up the Mac again, and Safari would be closed, or attempt to open Safari as usual, and it quits and the 'Send Report?' error message comes up. This hasn't jus
-
Internal Error has occurred. Check the log file for details.
Hello Experts, After installing Oracle 11g R2 in Windows XP (32-bit), I get the following error message when logging into https://localhost:1158/em - "Internal Error has occurred. Check the log file for details." I have extracted the following files
-
Do you have to be a FULL time student to purchase the student/teacher edition of Photoshop cs6?