FTPS: scenario configuration

hi gurus....
now i am able to confure the FTP server as mentioned in the blog "Along came a File Adapter, Mr. 'FTP' and Rest of the Gang By Shabarish Vijayakumar", it is working fine.
but now i want to work on FTPS configuration. is it sufficieant to work?, if it is so, how can i proceed with this existing one for FTPS ?, or else anything is required..?
please help me regarding this.....
thanks,
Kumar

Hi,
Not every FTP server supports FTPS and many that do require a configuration change to activate the FTPS protocol extension. Contact your FTP server software vendor for detailed information.
The File Adapter checks whether a trusted certificate chain exists for the X.509 certificate of the FTP server it is connecting to. A certificate chain is considered trusted if the chain is valid and at least one of its certificates is directly trusted. If the certificate chain is untrusted, the above exception is thrown. To configure a single certificate or a certification authority's CA certificate as directly trusted, add the respective X.509 certificate to the "Trusted CAs" view of the "Key Storage" service in the SAP J2EE Visual Administrator. In most cases, this will be the CA certificate that was used to sign the server certificate.
Regards,
Surya

Similar Messages

Activate Business Scenario Configuration Error in SCL SOAMANAGER

Hi Holger,
With your assistance, I managed to solve my issue creating the business scenario as posted in
Re: 3.3.8 Create a Business Scenario Configuration .
However, now I face another situation.
Once I have created the 3 required business scenario's on my SCL, I then proceed to activate them.
I face the similar error as posted by Simon Kemp previously on Activate Logical Ports Fails with UDDI error
Error Message:
Activate logical ports for service group /IWCNT/BPC_SERVICE_GROUP and application PS_ER4_100/APP_ER4CLNT100 in scenario STARTER_SERVICES
I have created the SAPLOGONPROFILE version 1, exported from the backend and imported into the SCL. The versions are the same.
Thanks.
Regards,
Haridev

Hi,
the troubleshooting guide I have created is now online:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/603ab5a0-184b-2e10-98a7-fa7e7e9da7a1
Can you take a look at the chapters:
7. An unexpected error occurred while executing the specified Action
18. When opening a Workspace in the Start Services scenario you get an unexpected error occurred
Maybe when you look through the Analysis and Resolution you get some points.
If it does not help please provide more information of the error that you get when activating the service.
Regards,
Holger.

FTP to FTP scenario. Pls advice urgent

Hi,
I have FTP to FTP scenario.
Do I need to install FTP server on both
Sender and Receiver File Systems
Regards

Hi Aashish,
Since my Sender File System and Receiver File System are different:
1. I will install FTP Server A on Sender File System.
2. I will install FTP Server B on Receiver File System.
3. I will open the port for FTP request -- Port 21
4. I will open the port for FTP response -- Port 21
5. I will provide all authrozaitions
Pls let me know if anything missing

Web Service to FTP scenario - MAPPING.NO_MAPPINGPROGRAM_FOUND error

Hi,
I am developing a Web Service to FTP scenario in XI, I am testing the interface by writing a client program using AXIS. when I invoke the service from the client, it is able to hit the service and writing the file to FTP with the data However the client is program receiving a fault with the below error.
"SystemError:<context/><code>MAPPING.NO_MAPPINGPROGRAM_FOUND</code><text>Unable to determine name of mapping program</text>"
I set quality of service to 'Exactly Once' on the SOAP sender adapter.
Would appreciate any help on this.

Hi,
What is the URL to which you are posting the SOAP message?
Is it?
http://<host>:<j2ee-port>/XISOAPAdapter/MessageServlet? channel=<party>:<service>:<channel>
If yes, then like mentioned the QOS is picked from the Sender SOAP adapter.
But, if the URL is ,
http://<server>:<ABAP-port>/sap/xi/engine?type=entry&version=3.0&Sender.Service=<YourService>&Interface=<YourNamespace>%5E<YourInterface>
Then you need to give the QOS as <b>,&QualityOfService=ExactlyOnce</b> appended to the above URL.
More, /people/stefan.grube/blog/2006/09/21/using-the-soap-inbound-channel-of-the-integration-engine
Regards
Bhavesh

Integration Scenario Configurator

Hello!
I want to generate the receiver determination for an integration process on XI 3.0 SP10 with the Integration Scenario Configurator.
I have created an Integration Scenario in the Integration Repository, there are no errors when checking with F7.
If I open it in the Integration Directory and go to Integration Scenario Configurator -> Check Configurability I get the following error message:
"Component View /Role <my Integration Process>: Only connections with interfaces that belong to the integration process interface are permitted"
What does the error message mean? What do I need to change to eliminate this error message?
The connections point to interfaces I have defined in the same software component as the integration scenario and process. For the integration process I have created abstract interfaces.
Regards, Tanja

Hi Simon!
I was able to solve this problem some weeks ago but thanks for your hint anyway.
As you have mentioned the problem was that in the Integration Repository the integration scenario was not consistent with the used integration process as it contained a wrong interface.
After I have corrected the integration process in the Integration Repository and updated the changes in the Integration Directory the generation with the Integration Scenario Configurator worked without any problems and the status of the process changed to 0 in SXI_CACHE.
Regards, Tanja

Scenario Configurator and Business Service without party

HI all
Quick question. I can't seem to assign a business service(without party) to an A2A connection in the scenario configurator on the ID. I have an email router service I created to push some emails to internal users, and it only allows me to choose Business systems. It does not seem to give the option of using the business services.
Is that correct, or am I missing something.
Thanks,
Chris

Hi Richard,
If in IR u had seleced the check box "External party with B2B Communication" under Application Component, only then u may c a business service under the scenario onfigurator.
So in ur case u couldnt view the business service.
Regards,
Prateek

Configuration assistant, business scenario configurator

Hi All,
We have two tools used in ID, namely,
1. configuration assistant,
2. business scenario configurator
Can anyone tell the difference between them ..
Regards,
Mona

Mona,
If you maintain your Integration Scenario in the repository with the Actions , Connections , etc... then Configuration Wizard will take you through a wizard to create the ID objects .... automatically
That case you do not need to create the objects manually...
However I do not use it and prefer to create the objects manually .. and also in XI3.0 there is a bug in the wizard for the sender agreement creation and you have to delete and create the sender agreement manually....
Cheers,
Himadri

3.3.8 Create a Business Scenario Configuration

Hi,
I am trying to create Business Scenario Configuration via the SCL SOAMANAGER site.
I click New, key in STARTER_SERVICES as the name and then proceed Next.
I click on Add, the Search page is displayed.
But I only have the option to search by Service. The guide states to change it to search by ServiceGroup.
I dont have that option.
Is there another way of doing this?
Thank you in advance.
Haridev

Hi Haridev,
all these steps should be taken care of by the installation Wizard.
However, if you want to do it manually, then make sure that you are in Step 3 Consumer Side. Click on Add and a new Window should open. In here the "Search By" field has "ServiceGroup" selected by default.
My guess would be that you are still in step 2 "Provider Side" where you can only search for Services.
Regards,
Holger.

Help on Business Scenario Configuration Guide for SRM Server 5.5

hai friends
where can i get Business Scenario Configuration Guide.for Version SRM server 5.5
i found for 4.0 and 5.0 but not for 5.5 Please let me know the link of market place
thanks
Regards
Krishna

Hi Krishna,
You can find all configuration guides at http://service.sap.com/ibc. For SRM server 5.5 (SRM5.0), the configuration guide has to be downloaded from Solution Manager.
Solution Manager is must for all new version implementations now.
Regards,
Prashant
Do reward points for helpful answers

Looking for Business Scenario Configuration Guide for ECO CRM

hi,
I have the SAP E-Commerce for mySAP ERP: Business Scenario Configuration Guide (for ECO). I am looking for the same document for ECO CRM. Does anyone know where I can find this document?
kind regards
Michael

Hi
Check the following Configuration guides
C14: CRM E-Commerce available on
http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/html/BBlibrary.htm
Hope this helps
Regards
Rekha Dadwal

FTP-FTP scenario...problem with FCC

Hi,
Iam doing a FTP to FTP scenario.I have specified the following parameters-
source.fieldNames
source.fieldSeparator -> ;
source.endSeparator ->'nl'
ignoreRecordsetName
source.fieldContentFormatting->nothing
source.missingLastfields->add
Target.fieldFixedLengths
Target.fixedLengthTooShortHandling ->Cut
Target.fieldSeparator -> ;
Target.endSeparator ->'nl'
There are 2 fields in source file that has blank values,so the source file is like
In the target file, the fields upto those fields with blank values are coming...but fields from those blank values are missing.so the output file looks like this.
The fields with blank values has lengths 50,50.
I want all the fields in output file .Every thing is direct mapping.
Please suggest something that will do this.Its urgent.

HI,
From sender side if you get blank value then that particular node will not be generated on target side XML structure in mapping. and you have used Target.fixedLengthTooShortHandling ->Cut so the further fields are not considerd properly.
Can you plesae add mapWithDefault api while mapping. Double click on it and pass blank value. This will create the Blank node on target side.
Source --> mapWithDefault ( [] ) --> Target
i hope this will solve your problem
Thanks
Swarup

The FTP server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the

When i tried to login in inbrowserediting.adobe.com i see that:
The FTP server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the same user.
What does it mean? What is problem?

Hi,
I have just created my First website using Muse and Its all been uploaded to my FTP server but i cant access the in browser editing which was the whole reason why i re-done the website for my client using muse
its saying the following
"The FTP server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the same user. server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the same user."
Yet i Can access my website fine "www.calmwood.com.au"
My ftp server responds to either the IP Address or the DNS Address www.calmwood.com.au
so i am not understanding how it thinks its different. when its fully referenced
any help would be appreciated.
thanks

Finding out which scenario configuration is used

Hi all,
is there a way to find dynamically which scenario configuration is been used? I have multiple scenario configurations for the same application and I will like to know at the header level (i.e. in header.jsp) which scenario the app was called with (e.g. which was the value of scenario.xcm at runtime.) Thanks.

Hi,
May i know which app you are talking about.
If you are talking about IPC then, you can generate the trace of the Product Configuration web page and in the source code you get, you can see which scenario was chosen.
If you are talking of ISA, then you can either see this in the URL that launches the app or in the XCM setting page, which scenario has been set to the default one.
Let me know in case you need more info.
Regards,
Kunal

FTP SCENARIO

hi gurus..............
i would like to do FTP scenario, like file to jdbc.
what r the pre requisits?
if i dont have any file server , and how can get it?
is any free downloads that can install in my local machine and use it as FTP Server?
can anybody help me?
thanks in advance....
          kumar

Hi,
If you dont have FTP Server and you want to place the file on XI Server's Directory(AL11) means,
1) goto SXDA_TOOLS Transaction code
2) Provide the Following details
Object Type : DXPROJECT
Program Type: BAPI
Program/Method: CREATE
3) Click on Copy Button
4) Select the Source as Presentation Server
     a) Select the File where you saved in your Local machine
5) Select the Target as Application server
     a) Check the check box Remote Server
     b) Select the File type as Physical
     c) In File name give /usr/sap/SSD/DVEBMGS00/work\Your file name (This the Server path
Where the file is going to save)
6) Click on Continue
Go to AL11 and check whether the File has been create in the following path //usr/sap/SSD/DVEBMGS00/work
Provide this path in the Communication channel path when you select the Transport Protocol as NFS and you place the file in AL11 directory.
Regards
Seshagiri

XI scenario configuration?

We have a fairly complex XI configuration scenario that I would like to make a renamed copy of.
For example,
we have a configuration scenario called "TENANT001_SCENARIO"
It contains a Business Service called "TENANT001" with 30+ communication channels (all file adapter with FTP login info)
It contains 10 Integration Processes (bpms)
It then contains a set of receiver determinations, interface determinations, sender agreements, and receiver agreements...
all connecting the above stuff together.
what I need to do is the following:
create another configuration scenario called "TENANT002_SCENARIO".
It must contain a Business Service called "TENANT002" that has copies of all of the same communication channels. These communication channels are exactly the same as those for TENANT001 except that they will be using a different FTP username/password and will be going to a different directory on the ftp server.
I then need copies of all the other objects, updated to use the new business service (i.e. communication channels).
I see that I can copy the Business Service object to my new scenario, which will make copies of all the communication channels (which have to be edited for the new ftp login info).
that's tedious, but acceptable.
however, the remaining objects... bpms, determinations, and agreements... can those be copied or do they have to be recreated?
Is there a simpler way to achieve all this. Essentially, we want to have the SAME EXACT mapping and processing happen, but be able to do it against multiple FTP accounts.
For example...
All communication to this XI box is done via FTP.
System 1 creates "file1.csv" and FTPs it to the ftp server into /tenant1/outbound.
XI picks it up, processes it and outputs it as "file1.xml" and FTPs it into /tenant1/inbound.
System 2 creates "file1.csv" and FTPs it to the ftp server into /tenant2/outbound.
XI picks it up, processes it and outputs it as "file1.xml" and FTPs it into /tenant2/inbound.
so the processing is exactly the same, except we need to differentiate only on the ftp account being used.
so, unfortunately, it seems that we have to replicate this whole XI configuration scenario structure to achieve this.
anyway, is that enough information to go on?
Bheem
<b></b>

hi,
most routing objects have to be recreated
so I guess it will be faster to recreate all of them
how long can it get 2-3 hours ?
Regards,
michal

FTPS: scenario configuration

Similar Messages

Maybe you are looking for