Fuji X-trans problem with blue channel (clipping)

One member on Dpreview forum reported this problem:
Lightroom 4.4 bug with new X-Trans handling algorithms. It looks like the blue channel is clipping in some instances, severely distorting handling of highlights. Here's an example
http://i.imgur.com/IyXI7C5.jpg
Link to raw: http://dl.dropbox.com/u/37346336/1275.raf

One might expect an Export function is single-threaded so the number of files exported wouldn’t matter, but perhaps if you are very close to the limit, memory fragmentation comes into play, where LR is requiring contiguous blocks and there aren’t any big enough. It’s probably time to upgrade to a 64-bit Windows system and start getting used to the Metro interface which isn’t bad as long as your frequently-used programs have tiles on the first screen.
Go to Help / System Info… and see how much memory LR has available. On my 32-bit system with 4GB of RAM installed LR only has 716.8MB available which is typical for 32-bit Windows applications:
Built-in memory: 3327.0 MB
Real memory available to Lightroom: 716.8 MB
Real memory used by Lightroom: 160.5 MB (22.3%)
Virtual memory used by Lightroom: 160.8 MB
Memory cache size: 33.2 MB
You could change your VM settings to allocate a multi-gigabyte minimum pagefile size to see if it makes any difference, in case LR is waiting on the VMM to allocate more and then gives up, but I’d expect LR is requiring actual RAM for processing images, not VM which is much , much slower.

Similar Messages

Encore CS4 (version 4.0.0.258) will not finish burning to blu-ray disc when using a menu template. DVD burning works fine. Anyone know the problem with blu-ray? HELP!

Encore CS4 (version 4.0.0.258) will not finish burning to blu-ray disc when using a menu template. DVD burning works fine with menu template. Anyone know the problem with blu-ray? HELP!

For CS4 you must update the Roxio component, especially with Win8
http://forums.adobe.com/thread/1309029 http://docs.roxio.com/patches/pxengine4_18_16a.zip
http://corel.force.com/roxio/articles/en_US/Master_Article/000012592-PX-Engine-Description -and-Download

Problem with scanning channels

We are trying to use BB 1.2 with a PCI-1200 card and the NI-DAQ that is included on the BB1.2 CD.
The real problem comes when the program is opened and we've configured the channels to have more than one channel scanning and the others disconnected. (The following does not occur with only one connected channel.) The first sign of troubles comes after calibration when we try to change the vertical scale. The software gives the same number for max and min (usually 25 one channel and 0 on the other). When I attempt to change these, the computer gives two consecutive errors: the first saying that the max cannot be greater than 25 (for example) and the second saying that the min cannot be less than 25 (always the same number as the max).
I've only gone as far as to try the scale for two channels.
Accepting the unacceptable settings on the vertical scale, I press the go button. At this point, I get Error -10007 (my old LabVIEW nemisis). If I select only one channel on the scan list, this does not happen. I should note that I have had this problem with the PCI-1200 on two different computers. One brand new Dell and one that already has a PCI-6034E installed. I cannot cause the error with the 6034E, which tells
me that it cannot be my computer settings. (If I acquire a few seconds of data with the 6034E, press stop, select the other card in the Channels window, and press GO, the same old problems arise.) When I use the test panels in MAX, the channels all work fine.
Travis Bendele
Manager of R&D
Millar Instruments

The patch mentioned above is attached to this comment.
Wilbur Shen
National Instruments
Attachments:
BioBench12P.exe ‏9058 KB

IPhone 5S, problem with blue screen

I have big problem with my Iphone 5s: about a month ago it start to go in "screen of death". In other words began to appear blue screen and reboot Iphone. When restoring iTunes gives an error (9). Sorry for my English. Thanks in advanced for your help.

WHAT?

Problem with fibre channel card and raid system after upgrading to 10.4.7

Hello, I have a problem with our Xserve G4 DP. After the installation of 10.4.7 everything works fine exept our fibre channel card. This card is connected to a Hitachi Raid System which worked fine over a year. But after the update the volume was no longer mounted. I even reinstalled the server to 10.4.4 and no sign of our raid volume. Using the apple fibre channel utiltiy 2.0, I see that there is a connection - but still the raid volume is not mounted. When I restart the server the lights on the back of the card are shortly flickering and sending some packets to the raid system but that´s all. Has anybody an idea?
Greetings from Heidelberg
Klaus
Xserve G4 DP 1 GHz Mac OS X (10.4.6) Mac OSX Server 10.4.7

You could re-update, by downloading the 10.4.7 Combination Updater from Apple.

Problem with blue color in Photoshop CS4 after calibrating monitor

Hi to all! I would appreciate if someone can help me!
Before some days I calibrated my monitor with Pantone Huey Pro and after that I find out that photoshop doesn't show blue color corectly. I create a blue (0,0,255) page and it looks a bit like violet, while I don't have any problems with red and green (which are perfect), or with other programs (other programs display blue and all colors correctly). But when I save this blue page and open it with a different program I see the real blue color. So the problem is that during editing in Photoshop blue color isn't correct, it's a bit violet.
Can anyone tell me why blue color doesn't behave properly in Photoshop? Is there any setting I should change in Photoshop Color Settings?
I use sRGB on my camera, and sRGB in Photoshop (North America General Purpose 2, sRGB IEC61966-2.1, U.S. Web coated (SWOP) v2, Dot Gain 20%, Dot Gain 20).
Thanks for your time!
George

Thanks for your quick responce!
I update Huey and Photoshop and did the calibration again but it didn't fix the problem. Is it possible that the calibrator doesn't work properly?
My monitor isn't very new, so I don't think it has wide gamut display.
When you say that "if your display is not truely sRGB" you mean that maybe the profile created Huey isn't correct? I have done many times the calibration and the result is always the same.
I think that Paintshop uses color management, too, shouldn't it display the same wrong blue color if Huey's profile is wrong?
How can I check if Huey works properly? Maybe I should try it on a different PC?
Thanks for your time!!!
Best regards,
George

Question: Quick Look in Finder; problems with alpha channels

Hi
"Quick look" in Finder is great for quick presentations of a folders selected contents but it only works with images that contains no alpha channels or masks. Is there any way to work around this to display say PhotoShop documents with alpha channels? Or any plug-ins/applications that can help?
thanks.

This has been broken forever in OS X, and I don't know why, because it used to work just fine. I suspect the engineers did something to QuickTime that causes this problem, but it has been borked for so long I don't remember when the ability to correctly display files went wrong. I just remember that once upon a time all sorts of things from Apple worked correctly in displaying such files, but pretty much nothing does now. This includes the Finder, Preview, QuickLook, and various third-party image browsers that use Apple's own system level image handling abilities, such as VitaminSee or CocoaViewX. When I need to actually see what's there, I browse with Adobe's Bridge.
Francine
Francine
Schwieder

Sync Problem with Blu Ray

I have a sync problem when using Premiere Pro CS5 to burn Blu Ray DVDs and wondered if anyone has had similar problems and has found a simple solution.
Equipment: Panasonic HMC-150 (AVCHD), shot at 59.94 fps, 720. MacPro with operating system up to date, quad core, 16 GB RAM, Nvidia Quadro 4000. PP CS5 also has all current updates downloaded.
When the AVCHD files are imported, they tend to be out of sync by 8 to 22 frames. I manually resync and edit. Then burn a Blu Ray DVD using Encore and end up out of sync again. I must be doing something wrong but can't figure it out. At this point, the only solution I can think of is to try to figure out how far out of sync I am once the DVD is burned and offset the audio that amount before transcoding.
Has anyone encountered this problem before? Any suggestions?
Thanks.

I have done some more tests and have determined that the problem only exists with Blu-ray. When I burn a non blu-ray dvd, video and audio remain in sync. I attempted to export to Final Cut Pro 7 using the export xml feature, but it doesn't work. I brought the original footage into FCP and burned a portion of it to blu-ray using the Share feature and there was no sync problem. So I guess my only alternative at this point is to re-edit the entire video in FCP.
In Premiere Pro I've checked to make sure that both the camera and the intake were set for no drop frame and they were. I've tried double checking the audio sync using the audio line out from the Mac rather than the firewire out to the Mackie Mixer, just in case there was a latency problem, which didn't seem logical and there wasn't any difference. It can't be a problem with the blu-ray burner since it works in FCP7. I'm running out of ideas of things I can tweak in Premiere, other than guessing just how far out of sync the program pushes the audio and then unlinking audio and pushing it the same number of frames the other direction before burning the blu-ray, but that will be hit and miss and it will start getting expensive throwing away blu-ray disks.
Any other ideas would be appreciated. Thanks. Jon

Mouse problem with FCP: drops clips or do not respond to clicks.

hi to all.
since i bought my macpro i've been noticing a very annoying problem when using FCP. there's a moment when the mouse stops to work properly and begins to drop clips when i try to move it or do not respond to clicks. two examples: 1- i want to move a clip from the end of the timeline to its beggining. in the middle of the way, it just drops the clip, as if i stoped pressing the mouse button. 2- i choose the pen tool so i can play with opacity and create fades. in the middle of the process of adjusting, it stops to work. i have to keep pressing several times to complete the action.
the problem is basically with the CLICK function. the cursor responds to the mouse properly, but when you click something to move it, it doesn't recognizes when you stop it and drops things. it happens only with fcp.
i'm using fcp 6.0.1, though the problem happened when i was using fcp 5.

I have a similar problem with my mouse in FCP. Perhaps not the same thing, but I think I figured out it's due to the design of the mouse. It's an Apple A1152, a white one-button mouse with a little scroll wheel. The thing is the whole top presses down for the click, and if I don't grab the two little tabs on the side that give you the leverage to keep on pressing the top, across larger distances I lose the pressure necessary and I drop whatever it is I was dragging. It's a pain because my hand is not the right size or shape to naturally get a hole of those little tabs. I don't know if your problem is related in any way but I thought I'd mention it just in case...,

Having trouble with blue ant s 4 hands free system.it will not correctly voice dial. using a g3 s iphone.read that g4 and g3'shave problems with blue tooth.any suggestions?

having trouble with blue ant s4 and iphone 3g or 3gs. voice commands to call a contact bring up wrong contact or playes an a song. read there are problems with iphones and this device. any suggestions or fixs?

You welcome

P45 Platinum - Problem with Dual Channel

Hi,
As Topic says I have a problem with my new board, it gets stuck at checking memory (that is what the status-led shows) it's a rev 1.1 and had it replaced once before for the same problem, so I think it's a Software-problem..... I have 2x2GB "Crucial Ballistix Union Jack CL4"-kit it works fine in single channel (DIMM 1&2) but not in dual channel (DIMM 1&3) so if someone knows PLEASE help me with the problem...
Sorry for my English , English is my 3rd language
Anyway Thanking everyone that replies with an answer that is OnT....
EDIT: Bios is V1.0 forgot to write it in the post...
CPU Intel E4600
RAM Crucial BallistiX CL4 Union Jack 2x2GB
VGA Gigabyte GeForce 9600GT 512MB Heatpipe
HDD Samsung F1 320GB 16MB SATA300
PSU FSP 450W

Quote from: Alex.Ethuba on 06-August-09, 02:27:46
Question:
The first time you took the board in did they replace it on the spot or did you have to wait for a few days?
If I may ask where did you purchase the board?
they tested it, bought it online so it took some days for the package to go and return. They also tested the board.
Quote from: Alex.Ethuba on 06-August-09, 02:27:46
When did you buy the board?
Bought it last month, and the board is new I think because I forgot to return the bracket(got one in the replacement) and the box isn't teared like the one I turned in ...

Problem with Duplicate Movie Clip which is tracked in an Array

I have a problem with my inventory code using Shared Objects.
What i did was to track the collected items in an array. Each time
the user collects an item, the original iconMC is duplicated and
loads a picture of the item (function loadImage). However, my
problem is that this retains the original array so even if I
already added new items into the inventory, the newest item doesn't
show. original array length = 2, new array length = 3; the last
item doesn't show. If I reload my flash, its the only time that
this shows. Now if I get an item and lessen the inventory, it still
retains the original length and doubles (or triples, depending on
how many items i lessened) the last item.
var so:SharedObject = SharedObject.getLocal("lakbayUser",
var i:Number = so.data.currentUserIndex;
var ctr = 0;
var iconCtr;
var iconArray: Array; //temporary storage of items placed
inside icon
function selectIcon(num){
eval("iconMC"+num)._alpha = 0;
so.data.users
[15][0] = true;
so.data.users[15][1] = iconArray
//loads the next icon
function setNextIconMC(itemCtr, iconCtr){
if(iconCtr > 0) {
newName = "iconMC" + iconCtr;
newPos = 130 * iconCtr;
_root.itemaHolderMC.iconHolderMC.iconMC0.duplicateMovieClip(newName,iconCtr+1);//does
not duplcate if unloadMovie is called
this[newName]._x = newPos;
this["iconMC"+iconCtr].enabled = true;
this["iconMC"+iconCtr]._alpha = 100;
loadMovie("gamit/icon"+itemCtr+".jpg",_root.itemaHolderMC.iconHolderMC[newName]);
trace(_root.itemaHolderMC.iconHolderMC[newName]);
else {
iconMC0.enabled = true;
iconMC0._alpha = 100;
loadMovie("gamit/icon"+itemCtr+".jpg",_root.itemaHolderMC.iconHolderMC.iconMC0);
//loads all the icons into the container
function loadImage(){
iconCtr=0;
iconArray = new Array();
for(itemCtr = 0; itemCtr < so.data.users
[14].length; itemCtr++){
if(so.data.users[14][itemCtr] == true){
iconArray[iconCtr] = itemCtr;
setNextIconMC(itemCtr,iconCtr);
iconCtr++;
if(iconCtr==0){
iconMC0._visible = false;
else iconMC0._visible = true;
loadImage();
so.flush();
stop();

hey there yenniie - each time you update the array you must
also call 'flush' to update the SharedObject. also please use the
'attach code' button to post code, as you can see what happened in
your post with the ' i ' value. So assuming I'm interpreting the
the missing characters correctly the method should be:

Menu Problem with Blu Ray

Can anyone help? I've created a project that contains 2 edited movies. I have added a main menu, and given both movies a main menu marker, and an end marker. Normally on DVD's this would send you back to the main menu when each of the films were completed, but I cannot get this to work with Blu Ray. Am I missing something here? What happens in this case is that the Disc starts with the menu, but if you pick the first item, the film will play OK, but instead of reverting back to the main menu, it carries on and shows the next .. and on completion, just terminates - does not go to the menu. The same if you select the second item. it just plays through and terminates. It seems that the End markers are being ignored. Has anyone got any ideas ??

You can see how this product works by going to http://Muvipix.com and typing "DVD Architect" in the product search box. This will bring up a free 3-part Basic Training tutorial series where you can see the product demonstrated.
You can also see more and learn about my book here.

Help with problems with Blue tooth with ios 8.1

I recently downloaded ios 8.1 because of previous problems involving blue tooth connectivity. Any solutions?

Hi 23serenity,
Thanks for participating in the Apple Support Communities.
It seems like your iPhone is in recovery mode, but it doesn't appear in iTunes when you connect it to your computer.
Next, give the troubleshooting steps at one of the following links a try:
Learn what to do if you don't see your device in iTunes for OS X, or in iTunes for Windows.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
All the best,
Jeremy

Problems with Blue Tubes software.

hello
I have just bought Blue Tubes software from Nomad but have been dissapointed with it so far. It does not work with my version of Logic Express or Garageband (or at least - I cannot get it to work) and now I would like to maybe make some mp3 recordings and give them this 'warm analogue sound' that blue tubes is supposed to provide.
has anyone here had experience of feeding mp3s though blue tubes software - or even getting it to work with 'Blue Tubes' whats the best way to do it.
any help would be welcome as so far I have been very underwhelmed by this software - as it seems unable to work with anything (I see the options in Logic express - but they are all greyed out).
thanks
Mark

Hi,
I have their "Vintage Studio bundle" which includes those plugins.
They have worked for me snce day one.
Please tell me your exact setup, as follows:
Mac computer type (Intel or PPC)
Mac OSX version (10.4. which one???)
Logic Express version.
Garageband version.
Blue Tubes version (you do have the latest from their website, yes? juts makgin sure...)
Then I might be able to help.
Also, you could ask Nomad Factory themselves. they are very good at finsing and solvign issues when installing their plugins.
Now, I have had this question asked before, so I'll ask you:
Did you download and install the AU VERSION??? There are three different installers that Nomad provides: 1. RTAS, 2. VST, and 3. AU Universal Binary.
If you ONLY downloaded ONE version, and it is NOT the AU version, that is why you cannot see the plugins neither in Logic Express, nor Garageband.
Please verify this.
Cheers

Fuji X-trans problem with blue channel (clipping)

Similar Messages

Maybe you are looking for