Fuji Xerox DocuPrint CP205w software unavailable

I have a Fuji Xerox DocuPrint CP205 wireless printer, it shows up in the print & scan box and when I select it to install it says there is software available but after trying to retrieve it, I get a message saying software is currently unavailable. I've downloaded and installed the drivers from Fuji Xerox but the same thing happens. I've tried resetting the printing system but no joy. Any help very gratefully received.

I did but I can't remember how. I tried the "Reset Printing System" a few times in the Print screen of System Preferences and I think it eventually worked. It was one of those things where I just kept trying different stuff, rebooting a lot and eventually it worked but I'm not sure exactly what fixed it. Sorry to not be of more help.

Similar Messages

Hi.Since I upgraded to Maverick my scanner which is Fuji Xerox Docuprint CM205 fw could not be used for scanning as mac wouldn't find the scanner.Can anyone help please?

Hi.Since I upgraded to Maverick my scanner which is Fuji Xerox Docuprint CM205 fw could not be used for scanning as mac wouldn't find the scanner.Can anyone help please?

There's an alternative ...
Using Image Capture as a scanner:
Connect the scanner to your Mac whether Wi-Fi or USB.
Launch Image Capture.
Click the very small black box bottom right side of the Image Capture window.
You'll see this pop up menu: Connecting this (device) opens:
You can select a default app to scan (Image Capture) and select a folder from the Imort To pop up menu on the right to save scanned files to.

Printing Problems with Fuji Xerox DocuPrint C4350

Hi all,
Since upgrading to Snow Leopard, I keep getting problems while printing to Fuji Xerox DocuPrint C4350. The problem seem to occur whenever I tried to print large files or files with pictures in them. My MacBook Pro seemed unable to connect to the printer and i got this error message: "Unable to connect to printer; will retry in 30 seconds..."
Previously in 10.5, I set up the printer as an Appletalk printer and it worked flawlessly. In Snow Leopard, I've tried setting up the printer as LPD as well as IPP but neither of them worked.
Does anyone have any solution to this problem? I would very much appreciate if anyone can help me.
Regards,
Norman

Hi Norman and Welcome to Apple Discussions...
It's possible the drivers for your printer need to be updated to run with 10.6. Check the Fuji / Xerox site for updates.
Carolyn
Message was edited by: Carolyn Samit

Can someone tell me the correct driver for the fuji xerox docuprint p205b for os x as the one on the fuji site does not work thank you!

I am desperate to find the correct driver for the p205b docuprint priner i know that the one on the fuji site is wrong and you need to install a driver for anothe rmodel as I found this in a forum last year and successfully installed on another mac but now I don't know where I got the info from, help !!! =)

I have the same printer and I'm using Lion 10.7.4.
I'm facing problems getting the mac to print via wireless.
I've installed the driver from http://support.apple.com/kb/DL904 as suggested by sig.
I've linked up the printer to the router via usb. It works like a charm with usb on Lion and wireless on windows.
Could anybody help ? I've included photos for more information. Many thanks.

Scanning with Fuji Xerox DocuPrint C1190 FS.

Does anyone know how to scan with DocuPrint C1190 FS on Mavericks? While I can find an updated print driver, I cannot find a scanner driver update. It worked well until Mavericks, but now can't seem to scan anything or even see the printer/scanner from software like VueScan (which it did previously). I hate to get rid of the beast as everything else works fine. Any help would be appreciated.
Thanks,
Dan

Hi Dan,
Just interested if you found a solution to this as I now have the same problem.
I have updated the system and now I have lost the scan function of the printer. I have updated the driver to 3.2 for the c1190fs but has made no difference. I have tried everything and still can't get it to work.
If you or anyone else has a solution and urgent one would be appreciated.
Many thanks
Jai

Fuji xerox scanning still not working under 10.9.1 mavericks

Mac OS releases up until 10.8.x have allowed me to scan documents to my MacBook Pro from my (USB connected) Fuji-Xerox Docuprint M205b. Since updating to 10.9 and now 10.9.1, the scanner is not recognised. Printing works fine. (My last driver update file was FujiXeroxPrinterDrivers2.5.dmg).

Firmware v130 adds Mavericks compatibility http://www.fujixeroxprinters.com.au/en/Downloads.aspx?product=9934&category=5726 &os=8192

Fuji xerox printer wont install

I have a new iMac, and I want to install my current office printer onto it, but it doesnt work. i downloaded the for the fuji xerox docuprint c525A from the website, and installed, although in the dialog box it only said upgrade. It doesnt show up in my "Printers" folder in the "Library", and although i have gone through the add IP printer menu, i still get the dialogue box saying that the printer address is busy, trying again in 30 seconds. Problem is, it doesnt try again, or it gets the same answer, I dont know. the same box stays there. the printer is on my office network, connected through a network hub. Anyone have any ideas?

I have a new iMac, and I want to install my current
office printer onto it, but it doesnt work. i
downloaded the for the fuji xerox docuprint c525A
from the website, and installed, although in the
dialog box it only said upgrade. It doesnt show up
in my "Printers" folder in the "Library",
Looking at the Xerox web site, it seems that there is really only a ppd for this old beast. So the file will most likely end up in the PPDs section of the printer library.
although i have gone through the add IP printer menu,
i still get the dialogue box saying that the printer
address is busy, trying again in 30 seconds.
This message can be the result of selecting the wrong type of connection during the installation or an incorrect queue name. Check what the other computers in you office have configured for this printer (if they are Windows, go to Properties > Ports > Configure Port).
The error can also be the result of incorrect network addressing. Make sure your iMac is on the same subnet as the printer.

CS4 : unable to print / stops printer / halts print job on Fuji Xerox c2255

Morning,
This discussion posting may or may not have some relevance to my previous posting, CS4 : memory leak errors (?) in Os X console log
I am working on a clients workstation and they are having a few problems. Specific hardware and software details are at the bottom of this posting.
THE PROBLEM
The problem is that I can not seem to print from CS4. The problem seems to be specifically Adobe CS4 related as I will explain below.
From the end user perspective, the CS4 suite appears to function normally with one exception - CS4 will not print. In the below example, I am referring to mainly Adobe Acrobat CS4 and InDesign CS4 as these are the programs that they use the most. The artist can still work with all the CS4 applications - opening new or existing indesign/acrobat documents, adding text, import, export, create pdfs, saving to same name or new name, etc... but they can't print out to a printer (Fuji Xerox c2255). For example, using InDesign, the artist can open an existing Indesign document and make changes to the Indesign document. She can save the document using the same name or a new name, but when she attempts to print the Indesign document, the document will not printed. If she saves the file as a pdf and using Acrobat to open the pdf and attempts to print the document, it will not print. BUT, if she uses preview to open the document and attempts to print, then it WILL print.
When attempting to print, the following happens,
- in acrobat CS4 or Indesign CS4, choose 'Print'
- choose A4 or A3 format
- click print
The job processes and is set to the printer spool as per normal. About a couple of second later, after the processing is done, the Printer Queue starts jumping up and down in the dock. Open up the printer queue, shows the following message 'Printer has stopped'. The job is present in the printer queue list. Restart the Printer, and restart the job, and then about 5 seconds later, the message appears again, 'Printer has stopped'. This continues ad nauseum until the job is manually deleted from the queue. No print outs.
PRINTER or PRINTER DRIVER
I have installed and uninstalled the printer driver half a dozen times. I have source the driver from different locations (US, Asia and Australia). In all three cases,the Fuji Xerox printer drivers look identical (I've opened them up in text edit). Every other application, on the Mac, appears to access the printer without any problems -Office 2008 ( Word, Excel), Preview, Text Edit, Text Wrangler, Mail, etc can all address the printer and print to the printer without any problems. Using any of these programmes, I can access all the functionality of the printer (A4 in Tray 1, A3 in Tray 2, Levels of the inks, etc) via the driver. When I installed the generic printer drive, I have no access to any of the Fuji Xerox Printer functionality. This leads me to think that the Fuji Xerox printer driver is not the problem.
Interestingly, using Apple's Preview, I can print any existing Acrobat documents without any problems - in either A4 or A3. However, if I attempt to print the SAME Acrobat document from Acrobat CS4, it will not print.
USE 'PRINTER DRIVER' option rather then choosing paper size.
I read in another posting, in the Adobe forum, of a similar problem with Duplex printing - if the the paper size is manually set (A3/A4) in the 'print document options', printers do not print duplex. The answer seemed to be instead of manually choosing the paper size (A4/A3), allow CS4 to determine the paper size. So, in the 'print document' dialog option, one should choose 'use printer driver' instead of specifying A3 or A4. An explanation suggested that the print engine refers to the printer driver to find out what options are availible and then CS4 chooses what size it wants to send the print job to. Forcing CS4 seems to stop duplex printing from working.
I will look at this suggestion next week when I return to the site.
NETWORK PRINTER
The fuji Xerox c2255 is a network printer. Both Mac Pro and printer have a fixed IPs. I have eliminated the network as a problem, by running a network cable directly from Mac Pro ethernet port to Fuji Xerox ethernet port. I can ping the printer directly from the Mac Pro; I can see the printer from the Mac. I can print directly to the printer from the Mac, using Text edit or any other application EXCEPT CS4. CS4 will not print.
CLIENT HAS UPDATED ALL DOCUMENT FILES TO CS4 via INX
I have since been informed that a staff member had (recently) updated all the documents to CS4 via INX. I wonder if this anything to do with the problems ? Unfortunately, I don't have any 'old' documents to test with. I wonder if the conversion process had 'modified' the pdf wrapper in some way ? I have tested this in the following manner - I opened a 'updated' CS4 document in Indesign CS4. If I try to print straight out of CS4, then the above problem occurs (i.e. the document will not print as descibed above). BUT, if I copy all the contents - from the updated CS4 document - and paste the contents directly into a NEWLY created document, then it WILL print.
UNINSTALL CS4 AND REINSTALL
Yes, this has been done three times so far with no further improvement. Each time, the steps that I have taken are as follows,
- repaired disk permissions.
- fsck in single user mode to confirm directory structure is fine
- uninstalled CS4 using the uninstaller.
- manually searched and remove any file, folder, cache that has the word 'adobe' in it from both User account, System Library and Library.
- used Onyx manual and automatic functions to clear all logs, font caches, spotlight databases, kernal caches, etc, etc
- ZapRAM Cmmd-Option-P-R (wait for start up chime 3 times)
- fsck again
- start Mac in Safe mode
- reinstalled CS4 from media (see version above)
- Following reinstallation, restarted mac as per normal.
- run Disk Utility to repair permissions
I have tried printing an existing CS4 document file with a freshly installed CS4 suite - directly from the media file (will not print). And I have attempted to print a CS4 document file after applying all updates (will not print) Neither approach improves the situation.
USE CS3
This has been considered but as the client(s) have already done the conversion of all their documents to the CS4 format using INX, then they are really committed to working with CS4. What I am attempting to do at this time is to find out WHY CS4 is doing what it is doing, and if there is a fix to this problem. If there is no fix, then I know I should use a different approach.
I am posting this message in the hope that someone may have already come across this problem or perhaps may be able to spot something that I have overlooked. This problem has really got me stumped - I have had experience with Adobes products since Photoshop 1.0 (1990s / Pre-CS1) but never had a problem as annoying or time consuming as this one - this is a dousy. I have lodged a case number with Adobe Technical Support.
Thank you for taking the time to read this longish posting. I would be most grateful for any feedback solutions, or suggestions.
Have a wonderful weekend.
Thank you,
Fred
Workstation specs are as follows,
MACINTOSH MODEL (Intel) 8 core - new model Mac Pro; just 1 month old.
Model Name: Mac Pro
Model Identifier: MacPro4,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 2.26 GHz
Number Of Processors: 2
Total Number Of Cores: 8
L2 Cache (per core): 256 KB
L3 Cache (per processor): 8 MB
Memory: 6 GB
SMC Version (system): 1.39f5
SMC Version (processor tray): 1.39f5
System Version: Mac OS X 10.5.7 (9J61)
ADOBE CS4 VERSION - Installed from media. No updates applied (but have already done with with an earlier installation)
Adobe Acrobat Pro 9.0 v9.0.0, Adobe Bridge CS4 v3.0.0.464, Dreamweaver CS4 v10.0.0.4117, Adobe Flash CS4 v10.0.0.544, Adobe InDesign 6.0.3.557, Adobe Media Encoder CS4 v4.0, Adobe Media Player v.11, Adobe Photoshop CS4 v11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch]), Adobe Updater 6.0.1.1464

Try resetting the printer subsystem.

Print quality problems on Fuji Xerox printers when printing from ArchiCAD and/or Preview.

Hello,
We experience major print quality problems when printing directly from Graphisoft's ArchiCAD, Nemetscheks Vectorworks and from Apple's Preview.
Basically we see various artefacts on our printed drawings, e.g. line thicknesses change and hatched patterns / fills are reproduced with patches where the lineweights and clours change completely... which is not acceptable.
This affects the following Fuji Xerox printer models on both 10.6.x and 10.7.x with the latest FJX PPDs:
ApeosPort C5540I
Xerox LF6605 MF
The workarounds for us are to either print PDFs from Adobe Acrobat Reader or via the rather dated Accxess Tools, besides that we prefer at times to print directly from a given Software it is also not always possible to generate a PDF and print it from Acrobat Reader... especially since the latest Adobe Reader update to its print dialogue makes printing from it extremely tedious - in fact we are considering going back to 9.5.2
Obviously, we have approached FJX Tech Support and are awaiting a reply - however we are disappointed that this is happening on relatively new equipment and wonder if anybody else has already found a solution.

The symptoms you mention could be related to the FJX engine and Acrobat is masking this fault. To test, you can create a Postscript file from the print dialog of ArchiCAD or VectorWorks and then download this to the Apeos RIP. If this produces the same result as when using the printer driver from the applications, then it would indicate that the engine is not capable of handling the data being sent to it from these applications.

Acrobat 8 Print Error, Xerox Docuprint Windows 2000

Windows 2000 SP4
Adobe Acrobat 8.12 Standard
Xerox DocuPrint 92C printer
Driver: Xerox Windows 2000/XP Production Printer Driver v 3.7.52 (2004)
PDF file version is 1.5
When I print the first page of the PDF file prints fine. The next set of pages prints a box outline, then fails. The printer prints an error report that says
Error: PostScriptJobAborted, job has error termination.
When I print the same document with Acrobat 7 Std, on the same machine (install/uninstall) it prints fine.
I do know that the Xerox drivers are OLD (2004), but I verified that it is the latest version available on the Xerox Web site.
This does print fine to another HP laser printer (unfortunately I can't use that one except for testing).
I've compared PostScript setting etc, but everything is set the same between the two versions. This seems like I will probably stick with version 7. After searching the forum, it seems like Acrobat 8 created a lot of printing problems.
Any thoughts/suggestions would be appreciated.

Just for the record, in case anyone else comes looking for a solution to the same problem, the issue appears to be with my Kaspersky Anti-Virus software. By setting a check mark against most of the exclusions in the Kaspersky application control for Acrobat Distiller everything now seems to be working OK.
Thanks to everyone who took the time to read my original posting.

Fuji Xerox Basic B&W Laser Priner P205B - Any chance?

Just purchased this laser printer without checking driver support, doh!
It seems a relatively new printer and most google searches related to fuji/linux/drivers bring up older (more industrial heavy weight) models.
http://www.fujixeroxprinters.com.au/en/ … p205b.aspx
I appreciate there is obviously no magic driver, but if I wanted to troubleshoot this myself where would I start?

Firstly, I found a project 'a linux printer driver for HBPL protocol' contains some HBPL printer drivers.
foo2hbpl contains driver of p105b/p205b .
The website is http://foo2hbpl.rkkda.com/
I tested it in archlinux.
Works very smoothly with cups.
Enjoy it.
Secondly,most FUJI XEROX provide Mac OSX drivers. In this drivers ,PPDs can directly be used in CUPS.
Steps of extraing PPD file as following:
1. Download the Mac OSX drivers from Fuji Xerox's site as name fxdpm255df_z0039m109ml.img
2. $ yaourt -S dmg2img
3. Convert the dmg file into an image:
$ dmg2img fxdpm255df_z0035m108ml.dmg m255.img
4. Mount the obtained image:
# pacman -S hfsprogs
$ mkdir img
# mount -t hfsplus -o force m255.img img
5. Use xar (yum install xar) to extract the pkg file:
$ yaourt -S xar
$ cp img/FX\ DocuPrint\ M255\ df_z\ Installer.pkg .
$ mkdir m255 && cd m255
$ xar -xf ../FX\ DocuPrint\ M255\ df_z\ Installer.pkg
6. Inside the extracted folders, locate and copy the Payload file with the PPDs:
$ cp 105ppdsm255df.pkg/Payload ../Payload.cpio.gz
7. Gunzip the file and extract the cpio archive:
$ cd ..
$ gunzip Payload.cpio.gz
$ mkdir ppd && cd ppd
$ cpio -id < ../Payload.cpio
8. Voilà! your PPD files :
$ cd PPDs/Contents/Resources/
$ ls
FX DocuPrint M255 df Fax.ppd.gz FX DocuPrint M255 z Fax.ppd.gz
FX DocuPrint M255 df.ppd.gz FX DocuPrint M255 z.ppd.gz
9. import FX DocuPrint M255 df.ppd.gz or FX DocuPrint M255 z.ppd.gz to cups and then printer is OK.
Lastly,I install p205b drivers in this way. I get error like this: /usr/lib/cups/fxhr2ap is not found.
I extra the fxhr2ap like above, the error is still there.
And, I guess the error cause by this:
$ file fxhr2ap
fxhr2ap: Mach-O universal binary with 2 architectures: [ppc: Mach-O ppc executable] [i386: Mach-O i386 executable]
fxhr2ap cannot run in archlinux.

HT3669 Correct Xerox printer driver for Fuji Xerox Apeos Port APIVC 3370 for a MacBook Air MAC OSX Version 10.7.4

May I please have information regarding the correct Xerox printer driver for Fuji Xerox Apeos Port APIVC 3370 for a MacBook Air running MAC OSX Version 10.7.4 software. Thank you Derek

Go to: http://www.fujixerox.com/eng/download/index.html
Select your country at bottom of page
Type in your printers Model number.

??? XEROX DOCUPRINT XJ8C

HOLA BUENAS
MI NOMBRE ES JOHN VERGARA.
TENGO:
HARDWARE
MS-6380E v1.X
ATHLON 1900XP
2 DISK WESTER DIGITAL 60GB.
VIDEO MSI G4MX420
CD-RW CREATIVE 121032E
XEROX DOCUPRINT XJ8C
128MB DDR PC 2100 (16MX64 MICRON -7.5)
SOFTWARE
WINDOWS ME
DRIVERS PLACA MADRE
?( NO ME FUNCIONAN LOS PROGRAMAS DE LA IMPRESORA, ESTA 100% OPERATIVA EN OTRO PC, PERO EN ESTE NUEVO EQUIPO QUE ME HE ARMADO NO QUIERE FUNCIONAR, HE BAJADO DEL SITIO DE XEROX LOS ULTIMOS DRIVERS DE LA IMPRESORA Y NADA
OJALA QUE ME RESPOMDAN YA QUE NO SE QUE HACER PARA PODER IMPRIMIR
JOHN VERGARA

hi
can you post in english please if possible

How to set fuji xerox m205fw

How to stup printer on the new ipad with fuji xerox m205fw docuprint m205

Drivers up to 10.6
http://www.fujixeroxprinters.com.au/en/support/Downloads.aspx?product=5411&categ ory=5726&os=8192&dl=1
Might try this driver:
http://www.fujixerox.co.jp/download/apeosport/download/4_c5570series/prt_macx105 e/

Cannot print to a Fuji-Xerox CP 305 d printer using an iPad

Cannot print to a Fuji-Xerox CP 305 d printer using an iPad. I note that there appears to be support for the 405 models only. C'mon Apple - get with the program

To print from the iPad your going to have to install some more software:
-- many printer makers have iPad applications for their printers. Look in the app store
-- generic software like Printopia
For a comprehensive list of links, see Texas Mac Man list:
https://discussions.apple.com/message/21291967#21291967
Helper app -- /print n share
Print directly to the widest range of network or WiFi printers available in any app. Alternatively print via your computer to ALL printers including USB & Bluetooth printers. View read and display large PDF, Office & iWork files. Easily transfer & store files from the Cloud or your computer.
https://itunes.apple.com/us/app/print-n-share/id301656026?mt=8
Software for your computer's printer:
Mac and Windows
http://osxdaily.com/2010/12/01/make-any-printer-airprint-compatible/
FingerPrint
http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/

Fuji Xerox DocuPrint CP205w software unavailable

Similar Messages

Maybe you are looking for