Fujifilm S5 Pro RAW-Files: Aperture unable to recover the R-Pixel values ?
I have some overexposed S5 Pro RAW files. With Adobe ACR it is easily possible to recover the hightlight areas - ACR also takes the R-Pixel into account and recovers a photo with a huge dynamic range.
Prior buying i am currently using Apple Aperture. Aperture seems unable to take the R-Pixel into account and seems using only the S-Pixel. I am unable to revover the whole dynamic range in the same photos with Aperture. Sky areas are mostly clipped and clouds can not be recovered. But with Adobe ACR its easy and not a problem.
Maybe Aperture uses only the basic S-Pixel and not the R-Pixel, maybe Apple has forgotten this important feature of the Fujifilm S5 Pro.
Its also possible that i am overlooking some small checkerboxes to invoke this extra feature ?
Does someone has any ideas ?
Thanks in advance
Barny
I have the same problem using the RAW-Files of the S5 pro with Aperture. I really would use this greate Apple-Software but I switched to Adobe Lightroom. In Lightroom my Camera is fully supported.
Daniel
Similar Messages
-
HT4757 When will Aperture support Fujifilm X-Pro1 raw files?
When will Aperture support Fujifilm X-Pro1 raw files?
I firmly disencourage people to purchase Aperture these days.
To everyone asking me for advise as a Pro photographer.
Apple attitude on this issue is of abandonement and ignorance of users needs.
Unfortunately, the feeling is that this is going to be the permanent standard.
They are not providing translations, not providing support to models such as X-Pro1 that has received inmediate reaction from major developers, neither do care for users that openly claim for RAW support for an extended model as X-10.
This is somehow another sign of apple arrogance in term of market predominant coompany.
If Apple do not begin to lose sales and an importan market share this is going to be worse and worse.
Best way: Ignore Aperture.
Adobe is nowadays the ONLY option for photographers.
I don't like Lightroom so I must select my shots with Photo Mechanic, or Xnview and then go to photoshop.
Sick of Apple. -
After reinstalling CS6 the bridge photo downloader isn't able to read raw files and fails to convert the raw files to DNG. Previously downloaded raw files, now DNG, open up successfully in Camera Raw 7. How do I get the photo downloader to read and convert raw files. MacBook Pro with Snow Leopard. No such problem before this reinstallation.
You should install Camera Raw 4.6.
Visit this page and follow the instructions carefully:
PC: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4040
Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4039
-Noel -
Bridge 5.0.2.4 with camera RAW 8.4.0.199 ON a MAC 10.10.1. Trying to update to camera RAW 8.7 to get my canon 7dMK2 raw files to work. But the updater say I have the latest update! Witch I clearly don't have . And my Photoshop have to different camera RAW plug-ins. The old 8.4 and the new 8.7. But it doesn't work. Have removed and reinstalled several times. What is going on? Why can't I update bridge to the latest version 8.7 or read my raw files from the Canon 7dmk2?
Try this:
http://blogs.adobe.com/crawlspace/2011/03/keeping-photoshop-up-to-date.html#notconnected -
I have downloaded Adobe camera raw 8.4 so that I can open raw files with pictures taken with the Sony a6000 camera. However it is not opening the images in camera raw. What can I do?
Close and restart Photoshop if you have not already done so.
In Photoshop, go to the Help - About Plug-in... menu then choose Camera Raw. What version does it say there?
-Noel -
I just purchased the new Canon SX60 camera. Despite downloading and installing the latest version of Adobe DNG converter, I receive an error message saying that Photoshop CS4 can't open up/convert raw files (.CR2). This is the same file format as used by the SX50, with which I never had any problem. Does anyone have a suggestion on how to fix this problem? Thanks.
Camera Raw plug-in | Supported cameras I do not see that SX60 as supported. Just how new is the SX60 when was it announces. Its support is not even listed in ACR 8.7 RC
-
Question?
I have accidentally deleted a large number of develped images in Lightroom before I did a backup. I reimported the original raw files back into Lightroom hoping the develop settings would be re-established but no luck. Notice system mau have done an auto-backup as have an lrcat-journal file. Can I use this to restore my develop settings. I also have jpgs generated from all the deleted images.Hello,
if you have a backup of your catalog you can do the following:
1. Backup your catalog first
2. Restore your backup catalog to some location
3. Open your current catalog and select "files->import from another catalog".
4. Select your backup catalog and your lost images. LR ask you if you want to overwrite the current settings or save them as a virtual copy.
As an alternativ you can open your backup catalog, select the "lost" images and save the development settings as xmp sidecar fiels (using ctrl-s). Then open your current catalog, seletct the images and use "Metadata->Read Metadata from files". -
Is it possibe to get an adobe acrobat 6.0 pro setup file if you have misplaced the setup disk?
Is it possibe to get an adobe acrobat 6.0 pro setup file if you have misplaced the setup disk? I need to repair the software on my computer.
Hi Levi,
I am sorry to inform you that Adobe Acrobat 6.0 Pro is an outdated version, Adobe doesn't support it & the download link doesn't exist anymore.
Regards,
Aadesh -
Why does my raw file show editing changes in the Organizer?
When I edit a raw (CR2) image and then save as a .tiff file and close, my original raw file also appears edited in the Organizer.
I have received advice telling me how to reset to default to get back my unedited CR2, but this is time consuming and I never had to do this in the past. How can I retain my CR2 in the Organizer after editing?brevardlady wrote:
When I edit a raw (CR2) image and then save as a .tiff file and close, my original raw file also appears edited in the Organizer.
I suppose everyone expects the edits in the conversion of raw files to be shown in the organizer thumbnail... but that's your choice.
I have received advice telling me how to reset to default to get back my unedited CR2, but this is time consuming and I never had to do this in the past. How can I retain my CR2 in the Organizer after editing?
Instead of using 'Open', try using 'Alt Open'. The edited conversion is transferred to the editor, but the edits are not saved in the xmp sidecar filee. They are lost, and you are shown the default ACR settings, if that's what you want. -
I have just purchased the new Canon 7D II. I am using CS6 and Lightroom 5.0, neither of which can open the RAW files although I see from the list of supported cameras that the 7D II is covered. I have updated both CS6 and LR so that is not the problem. Not sure what to do next.
It has been indicated that both of those cameras will be supported in the final release of Camera Raw 8.7. But there is no announced release date. There never is. I assume it will be before December 31. But that is only my guess based on the fact that the release candidate expires then.
-
Hey People,
Ive set up an SSL Clientless VPN on the Cisco 2821. Ive set up WINS, and the NBNS entries in the VPN config. When i log onto the VPN , i can access the file servers by typing in their names in the network fi
le box, but when i click browse network and select the network name i get the following message
"The following error occurred while attempting the file operation:
Unable to view the contents of the Domain/Workgroup. "
Has anyone come accross this before?
Im using Windows Server 2008R2 for the DC, Windows Server 2003 R2 For WINS and File Sharing.
The connection goes WAN->BROADBANDROUTER>CISCO2821
Any helo would be much greatly appreciated.
Thanks in advance!Please see old threads which discuss the same topic -- http://forums.oracle.com/forums/search.jspa?threadID=&q=An+error+occurred+while+attempting+to+establish+an+Applications+File+Server+connection+with+the+node&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein -
When does Photoshop cc supports the raw files wich are coming from the Nikon D5500 ?
Hello,
When does Photoshop cc supports the raw files wich are coming from the Nikon D5500 ?
Iam a very happy user of Photoshop, specially for my raw files... i find it frustrated that i can't work on my files for now..
Greatings DannyThe D5500 was just released and Adobe is working on support. Cannot say how long for sure, but it should be within a month or two. Meanwhile, you could shoot in NEF+JPEG and set Camera Raw to open your JPEGs as well. Not as much data, but will be better than nothing..
Benjamin -
CI********C13 is the serial no. Mac book pro. Blinking folder unable to connect the hard drive why?
CI********C13 is the serial no. Mac book pro. Blinking folder unable to connect the hard drive why?
<Personal Information Edited by Host>That means that a valid startup disk can't be found.
A flashing question mark or globe appears when you start your Mac - Apple Support
Your startup disk could be corrupted, the disk failed, or poor connections
Reset the SMC and NVRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM
Try booting to Recovery and repairing the HD
OS X: About OS X Recovery - Apple Support
Next reinstall the OS if Disk Utility in Recovery can see the HD
OS X Yosemite: Reinstall OS X
If the HD can be found check the connection. Next replae tthe HD
Last:
Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I was running Lightroom 3.6 with the OS Windows XP (Sp3). The whole system crashed, I am unable to recover the serial number. I then upgraded my OS to Windows 7 (x64) and down loaded Lightroom 4.4, I wanted to buy a licence so I then upgraded to Lightroom 5, now when I try to register I am asked for the original licence/serial number. Where do I go from here??????
If you upgraded from 3.6 to 5 (you didn't indicate buying 4.4) then you will need the serial number from 3.6 in order to be able to use 5. If you did not keep a record of it there is a chance it might be available thru your Adobe account online, but if not, there is likely not much you can do except to return the upgrade and purchase a full version. Try contacting support using chat and explain your situation to see if they can help.
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )
If you did purchase 4.4 then that should be sufficient to use to activate 5.
I can never be sure what goes on with Lightroom, and the Adobe site (even when it works properly) makes finding information about products difficult these days so I am at a loss to confirm anything I say. -
Any plan to support Fujifilm IS PRO RAW(.RAF) file?
Hi,
Fujifilm FinePix IS PRO is UV/IR capable camera with S5 PRO system (Nikon D200 body).
It's RAW structure is 99% identical if not 100%.
Unfortunately, all Apple products is not support its RAW image because it's not on its supporting list although the file structure is (almost) same.
Please let me know is there any chance to support this camera in future.
I can supply sample RAW files if you require.
Adobe is currently supporting FinePix IS PRO in Camera Raw.
Regards
Message was edited by: KiwiRiderI have the same problem using the RAW-Files of the S5 pro with Aperture. I really would use this greate Apple-Software but I switched to Adobe Lightroom. In Lightroom my Camera is fully supported.
Daniel
Maybe you are looking for
-
I have been trying to get elements 13 working for a couple of weeks, after many hours of chat with support and them using remote access, it has still not worked. However, having been on several websites I have made progress and it is now running as t
-
Require a Message mapping for this Logic.
Hi Experts, I require a Message mapping for this Logic. In the Source there are 4 fields and, the Target side, the fields should appear like this. Source Structure- File Record |-> Header Order_No Date |-> Item Mat_No Quantity Target Structure-IDoc I
-
How do I get photos to display in landscape?
When I want to look at photos in landscape the image is not rotating. I've looked in settings, but can't find anything I can change. Help! :)
-
Luxembourg phone number formatting in iOS = 4.0
Hello, Since upgrading to iOS 4, phone numbers here in Luxembourg are no longer displayed in a readable way, the formatting is incorrect. Example : the correct phone number 26 52 26 52 would be displayed as 2 652 2652. That's bizarre, not logical and
-
Adobe Acrobat Print Preview not supported
I have Adobe Acrobat 8.2.0 and have been having this issue (not really a problem but it bugs me) where when I go to print a PDF and click on preview before sending the document to the printer I always get this message pop up that says "Preview is not