Fujitsu-Siemens Myrica V32-1 DVI-D

Hi all,
I tried to connect this LCD-TV to a Mac mini using the DVI-D connection without success. VGA works fine. I suspect a problem with HDCP, which the Myrica V32 supports/needs on its DVI-D port.
Any suggestions or do we have to wait for another video card / software update on the Mac side ??
Thanks, Thilo

Try using DisplayConfigX to build a custom timing with reduced blanking. This should add stability to the DVI connection. In DisplayConfigX, click on the Resolutions tab and then click on the "+" at the lower left corner of the window to start a new resolution. Set the scroll menu at the top of the New resolution window to "Timing" and enter the following values in all the boxes:
1680 [Active] 1050
48 [Front porch] 3
32 [Sync] 6
80 [Back porch] 21
Click on the "Refresh rate" button at the bottom of the page and type 60 (Hz). Now click Enabled and Done and the timing should become saved and selectable. Good luck.

Similar Messages

  • Fujitsu-Siemens P24W-3 LCD flickers

    Hi guys,
    i connected a Fujitsu-Siemens P24W-3 LCD (1920 x 1200, 60 Hz) to my new MacBook Air using the Apple Mini DisplayPort to DVI Adapter and the display flickers.
    If I connect it with the Apple Mini DisplayPort to VGA Adapter it does not flicker but the image looks terrible, washed out.
    If I connect the display to the DVI port of my old MacBook Pro, it does not flicker.
    Therefore, I think the issue is with the adaptor, which should support the specs of 1920 x 1200 at 60 Hz.
    I tried another Apple Mini DisplayPort to DVI Adapter: the image flickers, albeit less.
    Help? Shall I try to return the adapter?

    Do you think it will help if I buy a Mini DisplayPort to HDMI Cable?

  • [Solved]Synaptics Touchpad not working at all on Fujitsu Siemens UH552

    Hi,
    I have just installed Arch on my Fujitsu Siemens UH552 laptop. Everything works except for the touchpad which seems to get loaded by Xorg, but when in X it doesn't work. I have tried both using /dev/input/event* and /dev/input/mouse0 as device paths, neither works.
    xf86-input-evdev and xf86-input-synaptics are installed.
    I have tried running both with the default 10-evdev.conf, with 10-synaptics.conf, with both, and without both.
    TLDR SOLUTION: https://bbs.archlinux.org/viewtopic.php … 3#p1189603
    My current 10-synaptics.conf:
    Section "InputClass"
    Identifier "Touchpad Catchall"
    MatchIsTouchpad "on"
    MatchDevicePath "/dev/input/event*"
    Driver "synaptics"
    Option "TapButton1" "1"
    Option "TapButton2" "2"
    Option "TapButton3" "3"
    EndSection
    Xorg.0.log
    [ 2275.127]
    X.Org X Server 1.12.4
    Release Date: 2012-08-27
    [ 2275.130] X Protocol Version 11, Revision 0
    [ 2275.131] Build Operating System: Linux 3.4.8-1-ARCH x86_64
    [ 2275.132] Current Operating System: Linux corvo 3.5.3-1-ARCH #1 SMP PREEMPT Sun Aug 26 09:14:51 CEST 2012 x86_64
    [ 2275.132] Kernel command line: root=/dev/sda2 rootflags=subvol=__active ro initrd=/boot/initramfs-linux.img BOOT_IMAGE=/boot/vmlinuz-linux
    [ 2275.134] Build Date: 27 August 2012 08:04:39AM
    [ 2275.135]
    [ 2275.136] Current version of pixman: 0.26.2
    [ 2275.138] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 2275.138] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 2275.142] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Sep 1 13:16:01 2012
    [ 2275.143] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 2275.144] (==) No Layout section. Using the first Screen section.
    [ 2275.144] (==) No screen section available. Using defaults.
    [ 2275.144] (**) |-->Screen "Default Screen Section" (0)
    [ 2275.144] (**) | |-->Monitor "<default monitor>"
    [ 2275.144] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 2275.144] (**) | |-->Device "Intel Graphics"
    [ 2275.144] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 2275.144] (==) Automatically adding devices
    [ 2275.144] (==) Automatically enabling devices
    [ 2275.144] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 2275.144] Entry deleted from font path.
    [ 2275.144] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 2275.144] Entry deleted from font path.
    [ 2275.144] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 2275.144] Entry deleted from font path.
    [ 2275.144] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 2275.144] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 2275.144] Entry deleted from font path.
    [ 2275.144] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 2275.144] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 2275.144] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 2275.144] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 2275.144] (II) Loader magic: 0x7c8b00
    [ 2275.144] (II) Module ABI versions:
    [ 2275.144] X.Org ANSI C Emulation: 0.4
    [ 2275.144] X.Org Video Driver: 12.1
    [ 2275.144] X.Org XInput driver : 16.0
    [ 2275.144] X.Org Server Extension : 6.0
    [ 2275.144] (--) PCI:*(0:0:2:0) 8086:0166:10cf:16c2 rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00002000/64
    [ 2275.144] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 2275.144] (II) LoadModule: "extmod"
    [ 2275.144] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 2275.145] (II) Module extmod: vendor="X.Org Foundation"
    [ 2275.145] compiled for 1.12.4, module version = 1.0.0
    [ 2275.145] Module class: X.Org Server Extension
    [ 2275.145] ABI class: X.Org Server Extension, version 6.0
    [ 2275.145] (II) Loading extension MIT-SCREEN-SAVER
    [ 2275.145] (II) Loading extension XFree86-VidModeExtension
    [ 2275.145] (II) Loading extension XFree86-DGA
    [ 2275.145] (II) Loading extension DPMS
    [ 2275.145] (II) Loading extension XVideo
    [ 2275.145] (II) Loading extension XVideo-MotionCompensation
    [ 2275.145] (II) Loading extension X-Resource
    [ 2275.145] (II) LoadModule: "dbe"
    [ 2275.145] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 2275.145] (II) Module dbe: vendor="X.Org Foundation"
    [ 2275.145] compiled for 1.12.4, module version = 1.0.0
    [ 2275.145] Module class: X.Org Server Extension
    [ 2275.145] ABI class: X.Org Server Extension, version 6.0
    [ 2275.145] (II) Loading extension DOUBLE-BUFFER
    [ 2275.145] (II) LoadModule: "glx"
    [ 2275.145] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 2275.145] (II) Module glx: vendor="X.Org Foundation"
    [ 2275.145] compiled for 1.12.4, module version = 1.0.0
    [ 2275.145] ABI class: X.Org Server Extension, version 6.0
    [ 2275.145] (==) AIGLX enabled
    [ 2275.145] (II) Loading extension GLX
    [ 2275.145] (II) LoadModule: "record"
    [ 2275.145] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 2275.145] (II) Module record: vendor="X.Org Foundation"
    [ 2275.145] compiled for 1.12.4, module version = 1.13.0
    [ 2275.145] Module class: X.Org Server Extension
    [ 2275.145] ABI class: X.Org Server Extension, version 6.0
    [ 2275.145] (II) Loading extension RECORD
    [ 2275.145] (II) LoadModule: "dri"
    [ 2275.145] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 2275.145] (II) Module dri: vendor="X.Org Foundation"
    [ 2275.145] compiled for 1.12.4, module version = 1.0.0
    [ 2275.145] ABI class: X.Org Server Extension, version 6.0
    [ 2275.145] (II) Loading extension XFree86-DRI
    [ 2275.145] (II) LoadModule: "dri2"
    [ 2275.145] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 2275.145] (II) Module dri2: vendor="X.Org Foundation"
    [ 2275.145] compiled for 1.12.4, module version = 1.2.0
    [ 2275.145] ABI class: X.Org Server Extension, version 6.0
    [ 2275.145] (II) Loading extension DRI2
    [ 2275.145] (II) LoadModule: "intel"
    [ 2275.146] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 2275.146] (II) Module intel: vendor="X.Org Foundation"
    [ 2275.146] compiled for 1.12.3.901, module version = 2.20.5
    [ 2275.146] Module class: X.Org Video Driver
    [ 2275.146] ABI class: X.Org Video Driver, version 12.1
    [ 2275.146] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
    Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
    Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
    Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
    Haswell Server (GT2+), Haswell SDV Desktop (GT1),
    Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
    Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
    Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
    Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
    Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
    Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
    Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
    Haswell ULT Server (GT1), Haswell ULT Server (GT2),
    Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
    Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
    Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
    Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
    Haswell CRW Server (GT2), Haswell CRW Server (GT2+)
    [ 2275.146] (--) using VT number 7
    [ 2275.149] drmOpenDevice: node name is /dev/dri/card0
    [ 2275.149] drmOpenDevice: open result is 7, (OK)
    [ 2275.150] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    [ 2275.150] drmOpenDevice: node name is /dev/dri/card0
    [ 2275.150] drmOpenDevice: open result is 7, (OK)
    [ 2275.150] drmOpenByBusid: drmOpenMinor returns 7
    [ 2275.150] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    [ 2275.150] drmOpenDevice: node name is /dev/dri/card0
    [ 2275.150] drmOpenDevice: open result is 8, (OK)
    [ 2275.150] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    [ 2275.150] drmOpenDevice: node name is /dev/dri/card0
    [ 2275.150] drmOpenDevice: open result is 8, (OK)
    [ 2275.150] drmOpenByBusid: drmOpenMinor returns 8
    [ 2275.150] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    [ 2275.150] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 2275.150] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 2275.150] (==) intel(0): RGB weight 888
    [ 2275.150] (==) intel(0): Default visual is TrueColor
    [ 2275.150] (**) intel(0): Option "AccelMethod" "sna"
    [ 2275.150] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
    [ 2275.151] (**) intel(0): Framebuffer tiled
    [ 2275.151] (**) intel(0): Pixmaps tiled
    [ 2275.151] (**) intel(0): 3D buffers tiled
    [ 2275.151] (**) intel(0): Throttling enabled
    [ 2275.151] (**) intel(0): Delayed flush enabled
    [ 2275.151] (**) intel(0): "Tear free" disabled
    [ 2275.151] (**) intel(0): Forcing per-crtc-pixmaps? no
    [ 2275.151] (II) intel(0): Output LVDS1 has no monitor section
    [ 2275.152] (II) intel(0): found backlight control interface acpi_video0 (type 'firmware')
    [ 2275.152] (II) intel(0): Output VGA1 has no monitor section
    [ 2275.153] (II) intel(0): Output HDMI1 has no monitor section
    [ 2275.193] (II) intel(0): Output DP1 has no monitor section
    [ 2275.193] (II) intel(0): EDID for output LVDS1
    [ 2275.193] (II) intel(0): Manufacturer: LGD Model: 371 Serial#: 0
    [ 2275.193] (II) intel(0): Year: 2012 Week: 0
    [ 2275.193] (II) intel(0): EDID Version: 1.3
    [ 2275.193] (II) intel(0): Digital Display Input
    [ 2275.193] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 16
    [ 2275.193] (II) intel(0): Gamma: 2.20
    [ 2275.193] (II) intel(0): No DPMS capabilities specified
    [ 2275.193] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 2275.193] (II) intel(0): First detailed timing is preferred mode
    [ 2275.193] (II) intel(0): redX: 0.589 redY: 0.347 greenX: 0.343 greenY: 0.555
    [ 2275.193] (II) intel(0): blueX: 0.160 blueY: 0.124 whiteX: 0.313 whiteY: 0.329
    [ 2275.193] (II) intel(0): Manufacturer's mask: 0
    [ 2275.193] (II) intel(0): Supported detailed timing:
    [ 2275.193] (II) intel(0): clock: 70.0 MHz Image Size: 293 x 165 mm
    [ 2275.193] (II) intel(0): h_active: 1366 h_sync: 1402 h_sync_end 1438 h_blank_end 1476 h_border: 0
    [ 2275.193] (II) intel(0): v_active: 768 v_sync: 772 v_sync_end 780 v_blanking: 790 v_border: 0
    [ 2275.193] (II) intel(0): LG Display
    [ 2275.193] (II) intel(0): LP133WH2-TLF1
    [ 2275.193] (II) intel(0): EDID (in hex):
    [ 2275.193] (II) intel(0): 00ffffffffffff0030e4710300000000
    [ 2275.193] (II) intel(0): 00160103801d10780afc359658578e29
    [ 2275.193] (II) intel(0): 1f505400000001010101010101010101
    [ 2275.193] (II) intel(0): 010101010101581b566e500016302424
    [ 2275.194] (II) intel(0): 480025a5100000190000000000000000
    [ 2275.194] (II) intel(0): 00000000000000000000000000fe004c
    [ 2275.194] (II) intel(0): 4720446973706c61790a2020000000fe
    [ 2275.194] (II) intel(0): 004c503133335748322d544c463100ce
    [ 2275.194] (II) intel(0): EDID vendor "LGD", prod id 881
    [ 2275.194] (II) intel(0): Printing DDC gathered Modelines:
    [ 2275.194] (II) intel(0): Modeline "1366x768"x0.0 70.00 1366 1402 1438 1476 768 772 780 790 -hsync -vsync (47.4 kHz eP)
    [ 2275.194] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 2275.194] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 2275.194] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 2275.194] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 2275.194] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    [ 2275.194] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    [ 2275.194] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 2275.194] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    [ 2275.194] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    [ 2275.194] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    [ 2275.194] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    [ 2275.194] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
    [ 2275.194] (II) intel(0): Printing probed modes for output LVDS1
    [ 2275.194] (II) intel(0): Modeline "1366x768"x60.0 70.00 1366 1402 1438 1476 768 772 780 790 -hsync -vsync (47.4 kHz eP)
    [ 2275.194] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
    [ 2275.194] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
    [ 2275.194] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
    [ 2275.194] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
    [ 2275.194] (II) intel(0): EDID for output VGA1
    [ 2275.195] (II) intel(0): EDID for output HDMI1
    [ 2275.236] (II) intel(0): EDID for output DP1
    [ 2275.236] (II) intel(0): Output LVDS1 connected
    [ 2275.236] (II) intel(0): Output VGA1 disconnected
    [ 2275.236] (II) intel(0): Output HDMI1 disconnected
    [ 2275.236] (II) intel(0): Output DP1 disconnected
    [ 2275.236] (II) intel(0): Using exact sizes for initial modes
    [ 2275.236] (II) intel(0): Output LVDS1 using initial mode 1366x768
    [ 2275.236] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 2275.236] (**) intel(0): Display dimensions: (290, 160) mm
    [ 2275.236] (**) intel(0): DPI set to (119, 121)
    [ 2275.236] (II) Loading sub module "dri2"
    [ 2275.236] (II) LoadModule: "dri2"
    [ 2275.237] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 2275.237] (II) Module dri2: vendor="X.Org Foundation"
    [ 2275.237] compiled for 1.12.4, module version = 1.2.0
    [ 2275.237] ABI class: X.Org Server Extension, version 6.0
    [ 2275.237] (==) Depth 24 pixmap format is 32 bpp
    [ 2275.237] (II) intel(0): SNA initialized with IvyBridge backend
    [ 2275.237] (==) intel(0): Backing store disabled
    [ 2275.237] (==) intel(0): Silken mouse enabled
    [ 2275.237] (II) intel(0): HW Cursor enabled
    [ 2275.237] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 2275.238] (==) intel(0): DPMS enabled
    [ 2275.239] (II) intel(0): [DRI2] Setup complete
    [ 2275.239] (II) intel(0): [DRI2] DRI driver: i965
    [ 2275.239] (II) intel(0): direct rendering: DRI2 Enabled
    [ 2275.239] (==) intel(0): hotplug detection: "enabled"
    [ 2275.239] (--) RandR disabled
    [ 2275.239] (II) Initializing built-in extension Generic Event Extension
    [ 2275.239] (II) Initializing built-in extension SHAPE
    [ 2275.239] (II) Initializing built-in extension MIT-SHM
    [ 2275.239] (II) Initializing built-in extension XInputExtension
    [ 2275.239] (II) Initializing built-in extension XTEST
    [ 2275.239] (II) Initializing built-in extension BIG-REQUESTS
    [ 2275.239] (II) Initializing built-in extension SYNC
    [ 2275.239] (II) Initializing built-in extension XKEYBOARD
    [ 2275.239] (II) Initializing built-in extension XC-MISC
    [ 2275.239] (II) Initializing built-in extension SECURITY
    [ 2275.239] (II) Initializing built-in extension XINERAMA
    [ 2275.239] (II) Initializing built-in extension XFIXES
    [ 2275.239] (II) Initializing built-in extension RENDER
    [ 2275.239] (II) Initializing built-in extension RANDR
    [ 2275.239] (II) Initializing built-in extension COMPOSITE
    [ 2275.239] (II) Initializing built-in extension DAMAGE
    [ 2275.250] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 2275.250] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 2275.250] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 2275.250] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 2275.250] (II) AIGLX: Loaded and initialized i965
    [ 2275.250] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 2275.251] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0)
    [ 2275.276] (II) intel(0): Setting screen physical size to 361 x 203
    [ 2275.319] (II) config/udev: Adding input device Power Button (/dev/input/event6)
    [ 2275.319] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 2275.319] (II) LoadModule: "evdev"
    [ 2275.319] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 2275.320] (II) Module evdev: vendor="X.Org Foundation"
    [ 2275.320] compiled for 1.12.3.901, module version = 2.7.3
    [ 2275.320] Module class: X.Org XInput Driver
    [ 2275.320] ABI class: X.Org XInput driver, version 16.0
    [ 2275.320] (II) Using input driver 'evdev' for 'Power Button'
    [ 2275.320] (**) Power Button: always reports core events
    [ 2275.320] (**) evdev: Power Button: Device: "/dev/input/event6"
    [ 2275.320] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 2275.320] (--) evdev: Power Button: Found keys
    [ 2275.320] (II) evdev: Power Button: Configuring as keyboard
    [ 2275.320] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
    [ 2275.320] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 2275.320] (**) Option "xkb_rules" "evdev"
    [ 2275.320] (**) Option "xkb_model" "evdev"
    [ 2275.320] (**) Option "xkb_layout" "se"
    [ 2275.355] (II) config/udev: Adding input device Fujitsu FUJ02E3 (/dev/input/event3)
    [ 2275.356] (**) Fujitsu FUJ02E3: Applying InputClass "evdev keyboard catchall"
    [ 2275.356] (II) Using input driver 'evdev' for 'Fujitsu FUJ02E3'
    [ 2275.356] (**) Fujitsu FUJ02E3: always reports core events
    [ 2275.356] (**) evdev: Fujitsu FUJ02E3: Device: "/dev/input/event3"
    [ 2275.356] (--) evdev: Fujitsu FUJ02E3: Vendor 0 Product 0x6
    [ 2275.356] (--) evdev: Fujitsu FUJ02E3: Found keys
    [ 2275.356] (II) evdev: Fujitsu FUJ02E3: Configuring as keyboard
    [ 2275.356] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/FUJ02E3:00/input/input3/event3"
    [ 2275.356] (II) XINPUT: Adding extended input device "Fujitsu FUJ02E3" (type: KEYBOARD, id 7)
    [ 2275.356] (**) Option "xkb_rules" "evdev"
    [ 2275.356] (**) Option "xkb_model" "evdev"
    [ 2275.356] (**) Option "xkb_layout" "se"
    [ 2275.357] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
    [ 2275.357] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 2275.357] (II) Using input driver 'evdev' for 'Video Bus'
    [ 2275.357] (**) Video Bus: always reports core events
    [ 2275.357] (**) evdev: Video Bus: Device: "/dev/input/event9"
    [ 2275.357] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 2275.357] (--) evdev: Video Bus: Found keys
    [ 2275.357] (II) evdev: Video Bus: Configuring as keyboard
    [ 2275.357] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9/event9"
    [ 2275.357] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
    [ 2275.358] (**) Option "xkb_rules" "evdev"
    [ 2275.358] (**) Option "xkb_model" "evdev"
    [ 2275.358] (**) Option "xkb_layout" "se"
    [ 2275.359] (II) config/udev: Adding input device Fujitsu FUJ02B1 (/dev/input/event2)
    [ 2275.359] (**) Fujitsu FUJ02B1: Applying InputClass "evdev keyboard catchall"
    [ 2275.359] (II) Using input driver 'evdev' for 'Fujitsu FUJ02B1'
    [ 2275.359] (**) Fujitsu FUJ02B1: always reports core events
    [ 2275.359] (**) evdev: Fujitsu FUJ02B1: Device: "/dev/input/event2"
    [ 2275.359] (--) evdev: Fujitsu FUJ02B1: Vendor 0 Product 0x6
    [ 2275.359] (--) evdev: Fujitsu FUJ02B1: Found keys
    [ 2275.359] (II) evdev: Fujitsu FUJ02B1: Configuring as keyboard
    [ 2275.359] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/FUJ02B1:00/input/input2/event2"
    [ 2275.359] (II) XINPUT: Adding extended input device "Fujitsu FUJ02B1" (type: KEYBOARD, id 9)
    [ 2275.359] (**) Option "xkb_rules" "evdev"
    [ 2275.359] (**) Option "xkb_model" "evdev"
    [ 2275.359] (**) Option "xkb_layout" "se"
    [ 2275.360] (II) config/udev: Adding input device Power Button (/dev/input/event5)
    [ 2275.360] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 2275.360] (II) Using input driver 'evdev' for 'Power Button'
    [ 2275.360] (**) Power Button: always reports core events
    [ 2275.360] (**) evdev: Power Button: Device: "/dev/input/event5"
    [ 2275.360] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 2275.360] (--) evdev: Power Button: Found keys
    [ 2275.360] (II) evdev: Power Button: Configuring as keyboard
    [ 2275.361] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5/event5"
    [ 2275.361] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 10)
    [ 2275.361] (**) Option "xkb_rules" "evdev"
    [ 2275.361] (**) Option "xkb_model" "evdev"
    [ 2275.361] (**) Option "xkb_layout" "se"
    [ 2275.362] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
    [ 2275.362] (II) No input driver specified, ignoring this device.
    [ 2275.362] (II) This device may have been added with another device file.
    [ 2275.362] (II) config/udev: Adding input device FJ Camera (/dev/input/event7)
    [ 2275.362] (**) FJ Camera: Applying InputClass "evdev keyboard catchall"
    [ 2275.362] (II) Using input driver 'evdev' for 'FJ Camera'
    [ 2275.362] (**) FJ Camera: always reports core events
    [ 2275.362] (**) evdev: FJ Camera: Device: "/dev/input/event7"
    [ 2275.363] (--) evdev: FJ Camera: Vendor 0x10f1 Product 0x1a44
    [ 2275.363] (--) evdev: FJ Camera: Found keys
    [ 2275.363] (II) evdev: FJ Camera: Configuring as keyboard
    [ 2275.363] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input7/event7"
    [ 2275.363] (II) XINPUT: Adding extended input device "FJ Camera" (type: KEYBOARD, id 11)
    [ 2275.363] (**) Option "xkb_rules" "evdev"
    [ 2275.363] (**) Option "xkb_model" "evdev"
    [ 2275.363] (**) Option "xkb_layout" "se"
    [ 2275.364] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
    [ 2275.364] (II) No input driver specified, ignoring this device.
    [ 2275.364] (II) This device may have been added with another device file.
    [ 2275.364] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
    [ 2275.364] (II) No input driver specified, ignoring this device.
    [ 2275.364] (II) This device may have been added with another device file.
    [ 2275.365] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
    [ 2275.365] (II) No input driver specified, ignoring this device.
    [ 2275.365] (II) This device may have been added with another device file.
    [ 2275.365] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 2275.365] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 2275.365] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 2275.366] (**) AT Translated Set 2 keyboard: always reports core events
    [ 2275.366] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 2275.366] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 2275.366] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 2275.366] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 2275.366] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 2275.366] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
    [ 2275.366] (**) Option "xkb_rules" "evdev"
    [ 2275.366] (**) Option "xkb_model" "evdev"
    [ 2275.366] (**) Option "xkb_layout" "se"
    [ 2275.366] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
    [ 2275.366] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Touchpad Catchall"
    [ 2275.366] (II) LoadModule: "synaptics"
    [ 2275.366] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 2275.367] (II) Module synaptics: vendor="X.Org Foundation"
    [ 2275.367] compiled for 1.12.2, module version = 1.6.2
    [ 2275.367] Module class: X.Org XInput Driver
    [ 2275.367] ABI class: X.Org XInput driver, version 16.0
    [ 2275.367] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    [ 2275.367] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 2275.367] (**) Option "Device" "/dev/input/event8"
    [ 2275.367] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
    [ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    [ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    [ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
    [ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
    [ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 2275.367] (**) Option "TapButton1" "1"
    [ 2275.367] (**) Option "TapButton2" "2"
    [ 2275.367] (**) Option "TapButton3" "3"
    [ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 2275.367] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 2275.367] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event8"
    [ 2275.368] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
    [ 2275.368] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    [ 2275.368] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
    [ 2275.368] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
    [ 2275.368] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 2275.368] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    [ 2275.368] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 2275.368] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 2275.368] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 2275.368] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
    [ 2275.368] (II) No input driver specified, ignoring this device.
    [ 2275.368] (II) This device may have been added with another device file.
    [ 2275.368] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
    [ 2275.368] (II) No input driver specified, ignoring this device.
    [ 2275.368] (II) This device may have been added with another device file.
    xinput
    ⎡ Virtual core pointer id=2 [master pointer (3)]
    ⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
    ⎜ ↳ SynPS/2 Synaptics TouchPad id=13 [slave pointer (2)]
    ⎣ Virtual core keyboard id=3 [master keyboard (2)]
    ↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
    ↳ Power Button id=6 [slave keyboard (3)]
    ↳ Fujitsu FUJ02E3 id=7 [slave keyboard (3)]
    ↳ Video Bus id=8 [slave keyboard (3)]
    ↳ Fujitsu FUJ02B1 id=9 [slave keyboard (3)]
    ↳ Power Button id=10 [slave keyboard (3)]
    ↳ FJ Camera id=11 [slave keyboard (3)]
    ↳ AT Translated Set 2 keyboard id=12 [slave keyboard (3)]
    running
    dmesg | grep -i synaptics
    doesn't show anything. However running
    dmesg | grep -i psmouse
    returns a lot of
    psmouse serio1: bad data from KBC - timeout
    Last edited by flako (2012-11-08 09:44:59)

    I have tried doing that with both linux mint, and now fedora live usb. Neither one loads the touchpad correctly.  So yeah, our problems weren't really related
    Anyway, I tried looking into the
    psmouse serio1: bad data from KBC - timeout
    messages, and tried running psmouse proto (defined in /etc/modprobe.conf/psmouse.conf) as both raw and imps as per https://answers.launchpad.net/ubuntu/+s … ion/206950 Unfortunately, that didn't solve anything. Using the raw setting meant that the touchpad wasn't loaded at all (as in not appearing in the Xorg.log at all).
    The laptop is quite new, but at the same time what i figured from the touchpad vendor & product ID, the touchpad itself isn't. So it should technically work. Before installing arch i booted into windows to see if everything worked, and found no issues with the touchpad. So I have ruled out any hardware errors. Maybe its just the Fn-key that doesn't work yet in Linux? But that doesn't explain the "psmouse serio1: bad data from KBC - timeout" Any pointers to where I should look/ what commands I should run to delve deeper into this issue?
    Last edited by flako (2012-09-09 12:10:51)

  • How do i connect my macbook pro to another screen (a fujitsu siemens) i got the cable for it but i want to know the settings so i transfer desc to the fujitsu screen.

    How do i connect my macbook pro to another screen (a fujitsu siemens) i got the cable for it but i want to know the settings so i transfer desc to the fujitsu screen.

    Welcome to Apple Support Communities
    If you have the cable, just connect it to both and the desktop will show up on the external display. Then, you can select different modes, changing arrangement in System Preferences > Displays > Arrangement, or using shortcuts > http://support.apple.com/kb/ht5019

  • Mac Mini using Fujitsu Siemens monitor

    I am using a Fujitsu Siemens monitor with my new Mac Mini. 
    What is displayed on it is too large for the screen and I have to keep moving the bar from left to right and using the up and down arrows.
    Also I can't see the Apple icon so that I can get the Apple menu .
    Any help please?

    Under Display settings u can change the zoom....so u can get in the screen. I'd the same problmen with my TV.

  • Time Capsule WiFi disconnects when a Fujitsu Siemen Laptop with b/g network

    Time Capsule WiFi disconnects when a Windows Vista based Laptop with "b/g" network connects. When i use Macbook with "n" Network.
    Surprising that TC and MacBook both from Apple can't stay connected when Fujitsu Siemens Laptop joins through WiFi.
    I use a DSL Modem (Speed 1 Mbps) connected thru ethernet to Time Capsule on Bridge Mode.

    Yes, n is better, but if you have it running on b/g/n (since you have to with your b/g only notebooks) the n is inactive. Kind of a waste. Others have resorted to adding another wireless router which one set to b/g/n and the other n-only.

  • Fujitsu-Siemens Amilo 3000-series

    I'm thinking about replacing my Asus EEE with a laptop which is "more capable". I was going to buy Fujitsu-Siemens Amilo Pa 3515 when I read that Ati radeon HD3200 is now supported in catalyst. Still wanting to know if anyone in the arch community has these new stylish black and white laptops from Fujitsu-Siemens.
    Here are the specs for 3515:
        * AMD Turion™ 64 X2 Mobile Technology RM-70
        * Windows® Vista® Home Premium (Arch is going to replace this, ofcourse)
        * 2048 Mt DDR II 667 Mhz
        * 250 Gt SATA
        * Super Multi Dual Layer DVD-drive
        * 15,4" TFT WXGA Brilliant View
        * WLAN
        * Webcam and mic
    So does anyone know how well these devices are supported. Thanks for replies in advance

    Okay here is the listing from lsmod when run in ubuntu:
    Is anyone willing to tell me what I'm looking for. What should i configure in order to make my arch install boot without acpi=off?
    Module                  Size  Used by
    ipv6                  267780  10
    af_packet              23812  2
    rfcomm                 41744  2
    l2cap                  25728  13 rfcomm
    bluetooth              61156  4 rfcomm,l2cap
    ppdev                  10372  0
    cpufreq_stats           7104  0
    cpufreq_powersave       2688  0
    cpufreq_conservative     8712  0
    cpufreq_userspace       5284  0
    cpufreq_ondemand        9740  0
    freq_table              5536  2 cpufreq_stats,cpufreq_ondemand
    dock                   11280  0
    sbs                    15112  0
    sbshc                   7680  1 sbs
    container               5632  0
    iptable_filter          3840  0
    ip_tables              14820  1 iptable_filter
    x_tables               16132  1 ip_tables
    aes_i586               33536  0
    dm_crypt               15364  0
    dm_mod                 62660  1 dm_crypt
    parport_pc             36260  0
    lp                     12324  0
    parport                37832  3 ppdev,parport_pc,lp
    joydev                 13120  0
    snd_hda_intel         344728  3
    snd_pcm_oss            42144  0
    snd_mixer_oss          17920  1 snd_pcm_oss
    snd_pcm                78596  2 snd_hda_intel,snd_pcm_oss
    sdhci                  19076  0
    evdev                  13056  8
    battery                14212  0
    snd_page_alloc         11400  2 snd_hda_intel,snd_pcm
    snd_hwdep              10500  1 snd_hda_intel
    ac                      6916  0
    mmc_core               51460  1 sdhci
    fglrx                1555468  27
    rt2860sta             519512  0
    snd_seq_dummy           4868  0
    agpgart                34760  1 fglrx
    snd_seq_oss            35584  0
    snd_seq_midi            9376  0
    snd_rawmidi            25760  1 snd_seq_midi
    snd_seq_midi_event      8320  2 snd_seq_oss,snd_seq_midi
    video                  19856  0
    snd_seq                54224  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
    output                  4736  1 video
    snd_timer              24836  2 snd_pcm,snd_seq
    snd_seq_device          9612  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
    psmouse                40336  0
    serio_raw               7940  0
    wmi_acer                9644  0
    snd                    56996  17
    snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
    button                  9232  0
    i2c_piix4               9612  0
    soundcore               8800  1 snd
    i2c_core               24832  1 i2c_piix4
    pcspkr                  4224  0
    shpchp                 34452  0
    pci_hotplug            30880  1 shpchp
    ext3                  136712  1
    jbd                    48404  1 ext3
    mbcache                 9600  1 ext3
    sg                     36880  0
    sr_mod                 17956  0
    cdrom                  37408  1 sr_mod
    sd_mod                 30720  3
    usbhid                 31872  0
    hid                    38784  1 usbhid
    r8169                  32900  0
    ehci_hcd               37900  0
    ahci                   28420  2
    ohci_hcd               25348  0
    usbcore               146028  4 usbhid,ehci_hcd,ohci_hcd
    libata                159344  1 ahci
    scsi_mod              151436  4 sg,sr_mod,sd_mod,libata
    thermal                16796  0
    processor              36872  1 thermal
    fan                     5636  0
    fbcon                  42912  0
    tileblit                3456  1 fbcon
    font                    9472  1 fbcon
    bitblit                 6784  1 fbcon
    softcursor              3072  1 bitblit
    fuse                   50708  3

  • MS-6353 (fujitsu-siemens)

    ogy? If you read this please help.  I have read a thread about this board but nothing was made concrete to me from what I got out of it.
      I can say that I got that it will run a 1.1 gig but didn't get where he found the bios to upgrade it to take the 1700 xp.  Also if anyone can point me to a manual (mine came without one) much appreciated.

    http://www.nforcershq.com/forum/viewtopic.php?t=870&highlight=6353
    http://manuals.fujitsu-siemens.com/PCDOCS/A26361-K619-Z100-US.PDF
    http://www.nforcershq.com/forum/viewtopic.php?t=1340
    http://www.amdforums.com/showindex.php?s=&threadid=188008
    lots of good info in them
    seems manual link may no longer work
    but the boards a small version of this
    and i know the bios from the 420 works in it as well
    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=10&MODEL=MS-6373

  • [Solved] No sound after reboot [FUJITSU-SIEMENS Amilo Pro V3205]

    I have an Intel 82801G sound card, which works fine with alsa/snd-hda-intel after I configure it with alsaconf. But after reboot alsa doesn't work until I reconfigure it again.
    Here stays, that it should work properly, but it doesn't.
    Please, could somebody help me?
    Edited: Or could somebody tell me how should I step by step install it? (I tried arch wiki)
    Last edited by dudko (2010-05-15 14:59:12)

    Solved on #alsa irc. Thank's gnubien, it was missing @alsa in rc.config.

  • Mac Mini and LCD TV - Screen looks pink

    I am using a Fujitsu-Siemens Myrica V27-1 LCD TV as the monitor of my Mac Mini. They are connected by a VGA cable through the Minis DVI/VGA adapter.
    The screen looks pink although the Mini detects the Myrica correctly. When I open Displays from the system settings (hope everything is translated right since I am using the German version of OS X 10.4.5), switch to the colors tab there is already a color profile called Myrica V27-1.
    I tried to calibrate again starting from that profile - but with no success. Still the white looks pink. The TV as such works perfect.
    Has anybody a hint? Could it be a solution to use DVI to DVI (The TV also has a DVI input)?
    Thanks in advance
    Falk

    It was indeed the VGA connection. I bought a DVI to DVI cable and now everything looks great.

  • Moving Zones between Sun and Fujitsu

    Hi,
    I have two new M4000 running some zones. Is it possible to use my old hardware, which is Fujitsu Siemens PrimePower 650, as a backup.
    I want to move the zones with zoneadm detach/attach from M4000 (sun4u) to PP650 (sun4us). With the -u Option, it should be possible to move zones between different architectures (e.g. from sun4u to sun4v).
    Does this also work with Fujitsu`s architecture sun4us?
    I am using sparse zones, so only /etc and /opt are moved between the systems.
    Regards,
    Hans-Jürgen
    Edited by: hjeiben on Sep 9, 2009 9:29 AM

    With the intention of what? SPARC and X86 are not binary compatible.........

  • Imaging Fujitsu Workstations

    hi all
    has anybody try to imaging the new fujitsu siemens Esprimo 5710 series
    with sata-cdrom drives ?

    HotPatch2 -no
    could not found the download for this patch
    > [email protected] wrote:
    > > hi all
    > > has anybody try to imaging the new fujitsu siemens Esprimo 5710 series
    > > with sata-cdrom drives ?
    > >
    >
    > Have you tried the latest imaging kernel from HotPatch 2?
    >
    > ---Kurt

  • PHP refuses to be rendered

    Hi,
    I've used the default PHP installation on OSX with no problems in the past (after uncommenting the 2 lines in httpd and enabling Personal Web Sharing), but after a recent reinstallation of the operating system (having re-updated all software) PHP refuses to render. HTML files render fine, but when I load up a PHP file, its source is displayed instead of being properly rendered. I like to think I know what I'm doing, but I'm befuddled :/
    Any help would be much appreciated.
    Here's my httpd.conf, if it helps:
    <pre>
    ## httpd.conf -- Apache HTTP server configuration file
    # Based upon the NCSA server configuration files originally by Rob McCool.
    # This is the main Apache server configuration file. It contains the
    # configuration directives that give the server its instructions.
    # See <URL:<a class="jive-link-external-small" href="http://">http://httpd.apache.org/docs/> for detailed information about
    # the directives.
    # Do NOT simply read the instructions in here without understanding
    # what they do. They're here only as hints or reminders. If you are unsure
    # consult the online docs. You have been warned.
    # After this file is processed, the server will look for and process
    # /private/etc/httpd/srm.conf and then /private/etc/httpd/access.conf
    # unless you have overridden these with ResourceConfig and/or
    # AccessConfig directives here.
    # The configuration directives are grouped into three basic sections:
    # 1. Directives that control the operation of the Apache server process as a
    # whole (the 'global environment').
    # 2. Directives that define the parameters of the 'main' or 'default' server,
    # which responds to requests that aren't handled by a virtual host.
    # These directives also provide default values for the settings
    # of all virtual hosts.
    # 3. Settings for virtual hosts, which allow Web requests to be sent to
    # different IP addresses or hostnames and have them handled by the
    # same Apache server process.
    # Configuration and logfile names: If the filenames you specify for many
    # of the server's control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path. If the filenames do not begin
    # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
    # with ServerRoot set to "/usr/local/apache" will be interpreted by the
    # server as "/usr/local/apache/logs/foo.log".
    ### Section 1: Global Environment
    # The directives in this section affect the overall operation of Apache,
    # such as the number of concurrent requests it can handle or where it
    # can find its configuration files.
    # ServerType is either inetd, or standalone. Inetd mode is only supported on
    # Unix platforms.
    ServerType standalone
    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    # NOTE! If you intend to place this on an NFS (or otherwise network)
    # mounted filesystem then please read the LockFile documentation
    # (available at <URL:<a class="jive-link-external-small" href="http://">http://www.apache.org/docs/mod/core.html#lockfile>);
    # you will save yourself a lot of trouble.
    ServerRoot "/usr"
    # The LockFile directive sets the path to the lockfile used when Apache
    # is compiled with either USEFCNTL_SERIALIZEDACCEPT or
    # USEFLOCK_SERIALIZEDACCEPT. This directive should normally be left at
    # its default value. The main reason for changing it is if the logs
    # directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
    # DISK. The PID of the main server process is automatically appended to
    # the filename.
    #LockFile "/private/var/run/httpd.lock"
    # PidFile: The file in which the server should record its process
    # identification number when it starts.
    PidFile "/private/var/run/httpd.pid"
    # ScoreBoardFile: File used to store internal server process information.
    # Not all architectures require this. But if yours does (you'll know because
    # this file will be created when you run Apache) then you must ensure that
    # no two invocations of Apache share the same scoreboard file.
    ScoreBoardFile "/private/var/run/httpd.scoreboard"
    # In the standard configuration, the server will process httpd.conf (this
    # file, specified by the -f command line option), srm.conf, and access.conf
    # in that order. The latter two files are now distributed empty, as it is
    # recommended that all directives be kept in a single file for simplicity.
    # The commented-out values below are the built-in defaults. You can have the
    # server ignore these files altogether by using "/dev/null" (for Unix) or
    # "nul" (for Win32) for the arguments to the directives.
    #ResourceConfig /private/etc/httpd/srm.conf
    #AccessConfig /private/etc/httpd/access.conf
    # Timeout: The number of seconds before receives and sends time out.
    Timeout 300
    # KeepAlive: Whether or not to allow persistent connections (more than
    # one request per connection). Set to "Off" to deactivate.
    KeepAlive On
    # MaxKeepAliveRequests: The maximum number of requests to allow
    # during a persistent connection. Set to 0 to allow an unlimited amount.
    # We recommend you leave this number high, for maximum performance.
    MaxKeepAliveRequests 100
    # KeepAliveTimeout: Number of seconds to wait for the next request from the
    # same client on the same connection.
    KeepAliveTimeout 15
    # Server-pool size regulation. Rather than making you guess how many
    # server processes you need, Apache dynamically adapts to the load it
    # sees --- that is, it tries to maintain enough server processes to
    # handle the current load, plus a few spare servers to handle transient
    # load spikes (e.g., multiple simultaneous requests from a single
    # Netscape browser).
    # It does this by periodically checking how many servers are waiting
    # for a request. If there are fewer than MinSpareServers, it creates
    # a new spare. If there are more than MaxSpareServers, some of the
    # spares die off. The default values are probably OK for most sites.
    MinSpareServers 5
    MaxSpareServers 10
    # Number of servers to start initially --- should be a reasonable ballpark
    # figure.
    StartServers 5
    # Limit on total number of servers running, i.e., limit on the number
    # of clients who can simultaneously connect --- if this limit is ever
    # reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
    # It is intended mainly as a brake to keep a runaway server from taking
    # the system with it as it spirals down...
    MaxClients 150
    # MaxRequestsPerChild: the number of requests each child process is
    # allowed to process before the child dies. The child will exit so
    # as to avoid problems after prolonged use when Apache (and maybe the
    # libraries it uses) leak memory or other resources. On most systems, this
    # isn't really needed, but a few (such as Solaris) do have notable leaks
    # in the libraries. For these platforms, set to something like 10000
    # or so; a setting of 0 means unlimited.
    # NOTE: This value does not include keepalive requests after the initial
    # request per connection. For example, if a child process handles
    # an initial request and 10 subsequent "keptalive" requests, it
    # would only count as 1 request towards this limit.
    MaxRequestsPerChild 0
    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, instead of the default. See also the <VirtualHost>
    # directive.
    #Listen 3000
    #Listen 12.34.56.78:80
    # BindAddress: You can support virtual hosts with this option. This directive
    # is used to tell the server which IP address to listen to. It can either
    # contain "*", an IP address, or a fully qualified Internet domain name.
    # See also the <VirtualHost> and Listen directives.
    #BindAddress *
    # Dynamic Shared Object (DSO) Support
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule' lines at this location so the
    # directives contained in it are actually available before they are used.
    # Please read the file http://httpd.apache.org/docs/dso.html for more
    # details about the DSO mechanism and run `httpd -l' for the list of already
    # built-in (statically linked and thus always available) modules in your httpd
    # binary.
    # Note: The order in which modules are loaded is important. Don't change
    # the order below without expert advice.
    # Example:
    # LoadModule foo_module libexec/mod_foo.so
    #LoadModule vhostaliasmodule libexec/httpd/modvhostalias.so
    #LoadModule env_module libexec/httpd/mod_env.so
    LoadModule configlogmodule libexec/httpd/modlogconfig.so
    #LoadModule mimemagicmodule libexec/httpd/modmimemagic.so
    LoadModule mime_module libexec/httpd/mod_mime.so
    LoadModule negotiation_module libexec/httpd/mod_negotiation.so
    #LoadModule status_module libexec/httpd/mod_status.so
    #LoadModule info_module libexec/httpd/mod_info.so
    LoadModule includes_module libexec/httpd/mod_include.so
    LoadModule autoindex_module libexec/httpd/mod_autoindex.so
    LoadModule dir_module libexec/httpd/mod_dir.so
    LoadModule cgi_module libexec/httpd/mod_cgi.so
    LoadModule asis_module libexec/httpd/mod_asis.so
    LoadModule imap_module libexec/httpd/mod_imap.so
    LoadModule action_module libexec/httpd/mod_actions.so
    #LoadModule speling_module libexec/httpd/mod_speling.so
    LoadModule userdir_module libexec/httpd/mod_userdir.so
    LoadModule alias_module libexec/httpd/mod_alias.so
    LoadModule rewrite_module libexec/httpd/mod_rewrite.so
    LoadModule access_module libexec/httpd/mod_access.so
    LoadModule auth_module libexec/httpd/mod_auth.so
    #LoadModule anonauthmodule libexec/httpd/modauthanon.so
    #LoadModule dbmauthmodule libexec/httpd/modauthdbm.so
    #LoadModule digest_module libexec/httpd/mod_digest.so
    #LoadModule proxy_module libexec/httpd/libproxy.so
    #LoadModule cernmetamodule libexec/httpd/modcernmeta.so
    #LoadModule expires_module libexec/httpd/mod_expires.so
    #LoadModule headers_module libexec/httpd/mod_headers.so
    #LoadModule usertrack_module libexec/httpd/mod_usertrack.so
    LoadModule logforensicmodule libexec/httpd/modlogforensic.so
    #LoadModule uniqueidmodule libexec/httpd/moduniqueid.so
    LoadModule setenvif_module libexec/httpd/mod_setenvif.so
    #LoadModule dav_module libexec/httpd/libdav.so
    #LoadModule ssl_module libexec/httpd/libssl.so
    #LoadModule perl_module libexec/httpd/libperl.so
    LoadModule php4_module libexec/httpd/libphp4.so
    LoadModule hfsapplemodule libexec/httpd/modhfsapple.so
    # Reconstruction of the complete module list from all available modules
    # (static and shared ones) to achieve correct module execution order.
    # [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
    ClearModuleList
    #AddModule modvhostalias.c
    #AddModule mod_env.c
    AddModule modlogconfig.c
    #AddModule modmimemagic.c
    AddModule mod_mime.c
    AddModule mod_negotiation.c
    #AddModule mod_status.c
    #AddModule mod_info.c
    AddModule mod_include.c
    AddModule mod_autoindex.c
    AddModule mod_dir.c
    AddModule mod_cgi.c
    AddModule mod_asis.c
    AddModule mod_imap.c
    AddModule mod_actions.c
    #AddModule mod_speling.c
    AddModule mod_userdir.c
    AddModule mod_alias.c
    AddModule mod_rewrite.c
    AddModule mod_access.c
    AddModule mod_auth.c
    #AddModule modauthanon.c
    #AddModule modauthdbm.c
    #AddModule mod_digest.c
    #AddModule mod_proxy.c
    #AddModule modcernmeta.c
    #AddModule mod_expires.c
    #AddModule mod_headers.c
    #AddModule mod_usertrack.c
    AddModule modlogforensic.c
    #AddModule moduniqueid.c
    AddModule mod_so.c
    AddModule mod_setenvif.c
    #AddModule mod_dav.c
    #AddModule mod_ssl.c
    #AddModule mod_perl.c
    AddModule mod_php4.c
    AddModule modhfsapple.c
    # ExtendedStatus controls whether Apache will generate "full" status
    # information (ExtendedStatus On) or just basic information (ExtendedStatus
    # Off) when the "server-status" handler is called. The default is Off.
    #ExtendedStatus On
    ### Section 2: 'Main' server configuration
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition. These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    # If your ServerType directive (set earlier in the 'Global Environment'
    # section) is set to "inetd", the next few directives don't have any
    # effect since their settings are defined by the inetd configuration.
    # Skip ahead to the ServerAdmin directive.
    # Port: The port to which the standalone server listens. For
    # ports < 1023, you will need httpd to be run as root initially.
    Port 80
    # If you wish httpd to run as a different user or group, you must run
    # httpd as root initially and it will switch.
    # User/Group: The name (or #number) of the user/group to run httpd as.
    # . On SCO (ODT 3) use "User nouser" and "Group nogroup".
    # . On HPUX you may not be able to use shared memory as nobody, and the
    # suggested workaround is to create a user www and use that user.
    # NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
    # when the value of (unsigned)Group is above 60000;
    # don't use Group "#-1" on these systems!
    User nobody
    Group nobody
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed. This address appears on some server-generated pages, such
    # as error documents.
    ServerAdmin [email protected]
    # ServerName allows you to set a host name which is sent back to clients for
    # your server if it's different than the one the program would get (i.e., use
    # "www" instead of the host's real name).
    # Note: You cannot just invent host names and hope they work. The name you
    # define here must be a valid DNS name for your host. If you don't understand
    # this, ask your network administrator.
    # If your host doesn't have a registered DNS name, enter its IP address here.
    # You will have to access it by its address (e.g., http://123.45.67.89/)
    # anyway, and this will make redirections work in a sensible way.
    # 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your
    # machine always knows itself by this address. If you use Apache strictly for
    # local testing and development, you may use 127.0.0.1 as the server name.
    #ServerName new.host.name
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    DocumentRoot "/Users/borischerny/Sites"
    # Each directory to which Apache has access, can be configured with respect
    # to which services and features are allowed and/or disabled in that
    # directory (and its subdirectories).
    # First, we configure the "default" to be a very restrictive set of
    # permissions.
    <Directory />
    Options FollowSymLinks
    AllowOverride None
    </Directory>
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    # This should be changed to whatever you set DocumentRoot to.
    <Directory "/Users/borischerny/Sites">
    # This may also be "None", "All", or any combination of "Indexes",
    # "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
    # Note that "MultiViews" must be named explicitly --- "Options All"
    # doesn't give it to you.
    Options Indexes FollowSymLinks MultiViews
    # This controls which options the .htaccess files in directories can
    # override. Can also be "All", or any combination of "Options", "FileInfo",
    # "AuthConfig", and "Limit"
    AllowOverride None
    # Controls who can get stuff from this server.
    Order allow,deny
    Allow from all
    </Directory>
    # UserDir: The name of the directory which is appended onto a user's home
    # directory if a ~user request is received.
    <IfModule mod_userdir.c>
    UserDir public_html
    </IfModule>
    # Control access to UserDir directories. The following is an example
    # for a site where these directories are restricted to read-only.
    #<Directory /home/*/public_html>
    # AllowOverride FileInfo AuthConfig Limit
    # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
    # <Limit GET POST OPTIONS PROPFIND>
    # Order allow,deny
    # Allow from all
    # </Limit>
    # <LimitExcept GET POST OPTIONS PROPFIND>
    # Order deny,allow
    # Deny from all
    # </LimitExcept>
    #</Directory>
    # DirectoryIndex: Name of the file or files to use as a pre-written HTML
    # directory index. Separate multiple entries with spaces.
    <IfModule mod_dir.c>
    DirectoryIndex index.html
    </IfModule>
    # AccessFileName: The name of the file to look for in each directory
    # for access control information.
    AccessFileName .htaccess
    # The following lines prevent .htaccess files from being viewed by
    # Web clients. Since .htaccess files often contain authorization
    # information, access is disallowed for security reasons. Comment
    # these lines out if you want Web visitors to see the contents of
    # .htaccess files. If you change the AccessFileName directive above,
    # be sure to make the corresponding changes here.
    # Also, folks tend to use names such as .htpasswd for password
    # files, so this will protect those as well.
    <Files ~ "^\.([Hh][Tt]|[Dd][Ss]_[Ss])">
    Order allow,deny
    Deny from all
    Satisfy All
    </Files>
    # Apple specific filesystem protection.
    <Files "rsrc">
    Order allow,deny
    Deny from all
    Satisfy All
    </Files>
    <Directory ~ ".*\.\.namedfork">
    Order allow,deny
    Deny from all
    Satisfy All
    </Directory>
    # CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
    # document that was negotiated on the basis of content. This asks proxy
    # servers not to cache the document. Uncommenting the following line disables
    # this behavior, and proxies will be allowed to cache the documents.
    #CacheNegotiatedDocs
    # UseCanonicalName: (new for 1.3) With this setting turned on, whenever
    # Apache needs to construct a self-referencing URL (a URL that refers back
    # to the server the response is coming from) it will use ServerName and
    # Port to form a "canonical" name. With this setting off, Apache will
    # use the hostname:port that the client supplied, when possible. This
    # also affects SERVER_NAME and SERVER_PORT in CGI scripts.
    UseCanonicalName On
    # TypesConfig describes where the mime.types file (or equivalent) is
    # to be found.
    <IfModule mod_mime.c>
    TypesConfig /private/etc/httpd/mime.types
    </IfModule>
    # DefaultType is the default MIME type the server will use for a document
    # if it cannot otherwise determine one, such as from filename extensions.
    # If your server contains mostly text or HTML documents, "text/plain" is
    # a good value. If most of your content is binary, such as applications
    # or images, you may want to use "application/octet-stream" instead to
    # keep browsers from trying to display binary files as though they are
    # text.
    DefaultType text/plain
    # The modmimemagic module allows the server to use various hints from the
    # contents of the file itself to determine its type. The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    # modmimemagic is not part of the default server (you have to add
    # it yourself with a LoadModule [see the DSO paragraph in the 'Global
    # Environment' section], or recompile the server and include modmimemagic
    # as part of the configuration), so it's enclosed in an <IfModule> container.
    # This means that the MIMEMagicFile directive will only be processed if the
    # module is part of the server.
    <IfModule modmimemagic.c>
    MIMEMagicFile /private/etc/httpd/magic
    </IfModule>
    # HostnameLookups: Log the names of clients or just their IP addresses
    # e.g., www.apache.org (on) or 204.62.129.132 (off).
    # The default is off because it'd be overall better for the net if people
    # had to knowingly turn this feature on, since enabling it means that
    # each client request will result in AT LEAST one lookup request to the
    # nameserver.
    HostnameLookups Off
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here. If you do define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    ErrorLog "/private/var/log/httpd/error_log"
    # LogLevel: Control the number of messages logged to the error_log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    LogLevel warn
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    LogFormat "%{Referer}i -> %U" referer
    LogFormat "%{User-agent}i" agent
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here. Contrariwise, if you do
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and not in this file.
    CustomLog "/private/var/log/httpd/access_log" common
    # If you would like to have agent and referer logfiles, uncomment the
    # following directives.
    #CustomLog "/private/var/log/httpd/referer_log" referer
    #CustomLog "/private/var/log/httpd/agent_log" agent
    # If you prefer a single logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #CustomLog "/private/var/log/httpd/access_log" combined
    # Optionally add a line containing the server version and virtual host
    # name to server-generated pages (error documents, FTP directory listings,
    # mod_status and mod_info output etc., but not CGI generated documents).
    # Set to "EMail" to also include a mailto: link to the ServerAdmin.
    # Set to one of: On | Off | EMail
    ServerSignature On
    # EBCDIC configuration:
    # (only for mainframes using the EBCDIC codeset, currently one of:
    # Fujitsu-Siemens' BS2000/OSD, IBM's OS/390 and IBM's TPF)!!
    # The following default configuration assumes that "text files"
    # are stored in EBCDIC (so that you can operate on them using the
    # normal POSIX tools like grep and sort) while "binary files" are
    # stored with identical octets as on an ASCII machine.
    # The directives are evaluated in configuration file order, with
    # the EBCDICConvert directives applied before EBCDICConvertByType.
    # If you want to have ASCII HTML documents and EBCDIC HTML documents
    # at the same time, you can use the file extension to force
    # conversion off for the ASCII documents:
    # > AddType text/html .ahtml
    # > EBCDICConvert Off=InOut .ahtml
    # EBCDICConvertByType On=InOut text/* message/* multipart/*
    # EBCDICConvertByType On=In application/x-www-form-urlencoded
    # EBCDICConvertByType On=InOut application/postscript model/vrml
    # EBCDICConvertByType Off=InOut /
    # Aliases: Add here as many aliases as you need (with no limit). The format is
    # Alias fakename realname
    <IfModule mod_alias.c>
    # Note that if you include a trailing / on fakename then the server will
    # require it to be present in the URL. So "/icons" isn't aliased in this
    # example, only "/icons/". If the fakename is slash-terminated, then the
    # realname must also be slash terminated, and if the fakename omits the
    # trailing slash, the realname must also omit it.
    Alias /icons/ "/usr/share/httpd/icons/"
    <Directory "/usr/share/httpd/icons">
    Options Indexes MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
    </Directory>
    # This Alias will project the on-line documentation tree under /manual/
    # even if you change the DocumentRoot. Comment it if you don't want to
    # provide access to the on-line documentation.
    Alias /manual/ "/Library/WebServer/Documents/manual/"
    <Directory "/Library/WebServer/Documents/manual">
    Options Indexes FollowSymlinks MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
    </Directory>
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the realname directory are treated as applications and
    # run by the server when requested rather than as documents sent to the client.
    # The same rules about trailing "/" apply to ScriptAlias directives as to
    # Alias.
    ScriptAlias /cgi-bin/ "/Library/WebServer/CGI-Executables/"
    # "/Library/WebServer/CGI-Executables" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    <Directory "/Library/WebServer/CGI-Executables">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
    </Directory>
    </IfModule>
    # End of aliases.
    # Redirect allows you to tell clients about documents which used to exist in
    # your server's namespace, but do not anymore. This allows you to tell the
    # clients where to look for the relocated document.
    # Format: Redirect old-URI new-URL
    # Directives controlling the display of server-generated directory listings.
    <IfModule mod_autoindex.c>
    # FancyIndexing is whether you want fancy directory indexing or standard
    IndexOptions FancyIndexing
    # AddIcon* directives tell the server which icon to show for different
    # files or filename extensions. These are only displayed for
    # FancyIndexed directories.
    AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
    AddIconByType (TXT,/icons/text.gif) text/*
    AddIconByType (IMG,/icons/image2.gif) image/*
    AddIconByType (SND,/icons/sound2.gif) audio/*
    AddIconByType (VID,/icons/movie.gif) video/*
    AddIcon /icons/binary.gif .bin .exe
    AddIcon /icons/binhex.gif .hqx
    AddIcon /icons/tar.gif .tar
    AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
    AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
    AddIcon /icons/a.gif .ps .ai .eps
    AddIcon /icons/layout.gif .html .shtml .htm .pdf
    AddIcon /icons/text.gif .txt
    AddIcon /icons/c.gif .c
    AddIcon /icons/p.gif .pl .py
    AddIcon /icons/f.gif .for
    AddIcon /icons/dvi.gif .dvi
    AddIcon /icons/uuencoded.gif .uu
    AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
    AddIcon /icons/tex.gif .tex
    AddIcon /icons/bomb.gif core
    AddIcon /icons/back.gif ..
    AddIcon /icons/hand.right.gif README
    AddIcon /icons/folder.gif ^^DIRECTORY^^
    AddIcon /icons/blank.gif ^^BLANKICON^^
    # DefaultIcon is which icon to show for files which do not have an icon
    # explicitly set.
    DefaultIcon /icons/unknown.gif
    # AddDescription allows you to place a short description after a file in
    # server-generated indexes. These are only displayed for FancyIndexed
    # directories.
    # Format: AddDescription "description" filename
    #AddDescription "GZIP compressed document" .gz
    #AddDescription "tar archive" .tar
    #AddDescription "GZIP compressed tar archive" .tgz
    # ReadmeName is the name of the README file the server will look for by
    # default, and append to directory listings.
    # HeaderName is the name of a file which should be prepended to
    # directory indexes.
    ReadmeName README.html
    HeaderName HEADER.html
    # IndexIgnore is a set of filenames which directory indexing should ignore
    # and not include in the listing. Shell-style wildcarding is permitted.
    IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
    </IfModule>
    # End of indexing directives.
    # Document types.
    <IfModule mod_mime.c>
    # AddLanguage allows you to specify the language of a document. You can
    # then use content negotiation to give a browser a file in a language
    # it can understand.
    # Note 1: The suffix does not have to be the same as the language
    # keyword --- those with documents in Polish (whose net-standard
    # language code is pl) may wish to use "AddLanguage pl .po" to
    # avoid the ambiguity with the common suffix for perl scripts.
    # Note 2: The example entries below illustrate that in quite
    # some cases the two character 'Language' abbreviation is not
    # identical to the two character 'Country' code for its country,
    # E.g. 'Danmark/dk' versus 'Danish/da'.
    # Note 3: In the case of 'ltz' we violate the RFC by using a three char
    # specifier. But there is 'work in progress' to fix this and get
    # the reference data for rfc1766 cleaned up.
    # Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
    # French (fr) - German (de) - Greek-Modern (el)
    # Italian (it) - Korean (kr) - Norwegian (no) - Norwegian Nynorsk (nn)
    # Portugese (pt) - Luxembourgeois* (ltz)
    # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cs)
    # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
    # Russian (ru)
    AddLanguage da .dk
    AddLanguage nl .nl
    AddLanguage en .en
    AddLanguage et .ee
    AddLanguage fr .fr
    AddLanguage de .de
    AddLanguage el .el
    AddLanguage he .he
    AddCharset ISO-8859-8 .iso8859-8
    AddLanguage it .it
    AddLanguage ja .ja
    AddCharset ISO-2022-JP .jis
    AddLanguage kr .kr
    AddCharset ISO-2022-KR .iso-kr
    AddLanguage nn .nn
    AddLanguage no .no
    AddLanguage pl .po
    AddCharset ISO-8859-2 .iso-pl
    AddLanguage pt .pt
    AddLanguage pt-br .pt-br
    AddLanguage ltz .lu
    AddLanguage ca .ca
    AddLanguage es .es
    AddLanguage sv .sv
    AddLanguage cs .cz .cs
    AddLanguage ru .ru
    AddLanguage zh-TW .zh-tw
    AddCharset Big5 .Big5 .big5
    AddCharset WINDOWS-1251 .cp-1251
    AddCharset CP866 .cp866
    AddCharset ISO-8859-5 .iso-ru
    AddCharset KOI8-R .koi8-r
    AddCharset UCS-2 .ucs2
    AddCharset UCS-4 .ucs4
    AddCharset UTF-8 .utf8
    # LanguagePriority allows you to give precedence to some languages
    # in case of a tie during content negotiation.
    # Just list the languages in decreasing order of preference. We have
    # more or less alphabetized them here. You probably want to change this.
    <IfModule mod_negotiation.c>
    LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ru ltz ca es sv tw
    </IfModule>
    # AddType allows you to tweak mime.types without actually editing it, or to
    # make certain files to be certain types.
    AddType application/x-tar .tgz
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    # Despite the name similarity, the following Add* directives have nothing
    # to do with the FancyIndexing customization directives above.
    AddEncoding x-compress .Z
    AddEncoding x-gzip .gz .tgz
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #AddType application/x-compress .Z
    #AddType application/x-gzip .gz .tgz
    # AddHandler allows you to map certain file extensions to "handlers",
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action command (see below)
    # If you want to use server side includes, or CGI outside
    # ScriptAliased directories, uncomment the following lines.
    # To use CGI scripts:
    #AddHandler cgi-script .cgi
    # To use server-parsed HTML files
    #AddType text/html .shtml
    #AddHandler server-parsed .shtml
    # Uncomment the following line to enable Apache's send-asis HTTP file
    # feature
    #AddHandler send-as-is asis
    # If you wish to use server-parsed imagemap files, use
    #AddHandler imap-file map
    # To enable type maps, you might want to use
    #AddHandler type-map var
    </IfModule>
    # End of document types.
    # Action lets you define media types that will execute a script whenever
    # a matching file is called. This eliminates the need for repeated URL
    # pathnames for oft-used CGI file processors.
    # Format: Action media/type /cgi-script/location
    # Format: Action handler-name /cgi-script/location
    # MetaDir: specifies the name of the directory in which Apache can find
    # meta information files. These files contain additional HTTP headers
    # to include when sending the document
    #MetaDir .web
    # MetaSuffix: specifies the file name suffix for the file containing the
    # meta information.
    #MetaSuffix .meta
    # Customizable error response (Apache style)
    # these come in three flavors
    # 1) plain text
    #ErrorDocument 500 "The server made a boo boo.
    # n.b. the single leading (") marks it as text, it does not get output
    # 2) local redirects
    #ErrorDocument 404 /missing.html
    # to redirect to local URL /missing.html
    #ErrorDocument 404 /cgi-bin/missing_handler.pl
    # N.B.: You can redirect to a script or a document using server-side-includes.
    # 3) external redirects
    #ErrorDocument 402 http://some.other-server.com/subscription_info.html
    # N.B.: Many of the environment variables associated with the original
    # request will not be available to such a script.
    # Customize behaviour based on the browser
    <IfModule mod_setenvif.c>
    # The following directives modify normal HTTP response behavior.
    # The first directive disables keepalive for Netscape 2.x and browsers that
    # spoof it. There are known problems with these browser implementations.
    # The second directive is for Microsoft Internet Explorer 4.0b2
    # which has a broken HTTP/1.1 implementation and does not properly
    # support keepalive when it is used on 301 or 302 (redirect) responses.
    BrowserMatch "Mozilla/2" nokeepalive
    BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
    # The following directive disables HTTP/1.1 responses to browsers which
    # are in violation of the HTTP/1.0 spec by not being able to grok a
    # basic 1.1 response.
    BrowserMatch "RealPlayer 4\.0" force-response-1.0
    BrowserMatch "Java/1\.0" force-response-1.0
    BrowserMatch "JDK/1\.0" force-response-1.0
    </IfModule>
    # End of browser customization directives
    # Allow server status reports, with the URL of http://servername/server-status
    # Change the ".your-domain.com" to match your domain to enable.
    #<Location /server-status>
    # SetHandler server-status
    # Order deny,allow
    # Deny from all
    # Allow from .your-domain.com
    #</Location>
    # Allow remote server configuration reports, with the URL of
    # http://servername/server-info (requires that mod_info.c be loaded).
    # Change the ".your-domain.com" to match your domain to enable.
    #<Location /server-info>
    # SetHandler server-info
    # Order deny,allow
    # Deny from all
    # Allow from .your-domain.com
    #</Location>
    # There have been reports of people trying to abuse an old bug from pre-1.1
    # days. This bug involved a CGI script distributed as a part of Apache.
    # By uncommenting these lines you can redirect these attacks to a logging
    # script on phf.apache.org. Or, you can record them yourself, using the script
    # support/phfabuselog.cgi.
    #<Location /cgi-bin/phf*>
    # Deny from all
    # ErrorDocument 403 http://phf.apache.org/phfabuselog.cgi
    #</Location>
    # Proxy Server directives. Uncomment the following lines to
    # enable the proxy server:
    #<IfModule mod_proxy.c>
    # ProxyRequests On
    # <Directory proxy:*>
    # Order deny,allow
    # Deny from all
    # Allow from .your-domain.com
    # </Directory>
    # Enable/disable the handling of HTTP/1.1 "Via:" headers.
    # ("Full" adds the server version; "Block" removes all outgoing Via: headers)
    # Set to one of: Off | On | Full | Block
    # ProxyVia On
    # To enable the cache as well, edit and uncomment the following lines:
    # (no cacheing without CacheRoot)
    # CacheRoot "/private/var/run/proxy"
    # CacheSize 5
    # CacheGcInterval 4
    # CacheMaxExpire 24
    # CacheLastModifiedFactor 0.1
    # CacheDefaultExpire 1
    # NoCache a-domain.com another-domain.edu joes.garage-sale.com
    #</IfModule>
    # End of proxy directives.
    ### Section 3: Virtual Hosts
    # VirtualHost: If you want to maintain multiple domains/hostnames on your
    # machine you can setup VirtualHost containers for them. Most configurations
    # use only name-based virtual hosts so the server doesn't need to worry about
    # IP addresses. This is indicated by the asterisks in the directives below.
    # Please see the documentation at <URL:<a class="jive-link-external-small" href="http://">http://www.apache.org/docs/vhosts/>
    # for further details before you try to setup virtual hosts.
    # You may use the command line option '-S' to verify your virtual host
    # configuration.
    # Use name-based virtual hosting.
    #NameVirtualHost *:80
    # VirtualHost example:
    # Almost any Apache directive may go into a VirtualHost container.
    # The first VirtualHost section is used for requests without a known
    # server name.
    #<VirtualHost *:80>
    # ServerAdmin [email protected]
    # DocumentRoot /www/docs/dummy-host.example.com
    # ServerName dummy-host.example.com
    # ErrorLog logs/dummy-host.example.com-error_log
    # CustomLog logs/dummy-host.example.com-access_log common
    #</VirtualHost>
    </pre>

    sorry i forgot that... i use php5 so i guessed at the module name... upon looking closer at the conf its mod_php4.c
    <pre>
    <IfModule mod_php4.c>
    AddType application/x-httpd-php .php
    </IfModule>
    </pre>

  • PHP Issue

    I currently have been hacking around trying to get the pre-installed php that comes with Mac OS X enabled, but seem unable to get the page viewable from localhost or just simply viewing it in safari through finder. It gives me the underlying code when I try to view it, ie the php isn't running ... my httpd.conf file is below: Help greatly appreciated on this! Thanks
    ## httpd.conf -- Apache HTTP server configuration file
    # Based upon the NCSA server configuration files originally by Rob McCool.
    # This is the main Apache server configuration file. It contains the
    # configuration directives that give the server its instructions.
    # See <URL:<a class="jive-link-external-small" href="http://">http://httpd.apache.org/docs/> for detailed information about
    # the directives.
    # Do NOT simply read the instructions in here without understanding
    # what they do. They're here only as hints or reminders. If you are unsure
    # consult the online docs. You have been warned.
    # After this file is processed, the server will look for and process
    # /private/etc/httpd/srm.conf and then /private/etc/httpd/access.conf
    # unless you have overridden these with ResourceConfig and/or
    # AccessConfig directives here.
    # The configuration directives are grouped into three basic sections:
    # 1. Directives that control the operation of the Apache server process as a
    # whole (the 'global environment').
    # 2. Directives that define the parameters of the 'main' or 'default' server,
    # which responds to requests that aren't handled by a virtual host.
    # These directives also provide default values for the settings
    # of all virtual hosts.
    # 3. Settings for virtual hosts, which allow Web requests to be sent to
    # different IP addresses or hostnames and have them handled by the
    # same Apache server process.
    # Configuration and logfile names: If the filenames you specify for many
    # of the server's control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path. If the filenames do not begin
    # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
    # with ServerRoot set to "/usr/local/apache" will be interpreted by the
    # server as "/usr/local/apache/logs/foo.log".
    ### Section 1: Global Environment
    # The directives in this section affect the overall operation of Apache,
    # such as the number of concurrent requests it can handle or where it
    # can find its configuration files.
    # ServerType is either inetd, or standalone. Inetd mode is only supported on
    # Unix platforms.
    ServerType standalone
    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    # NOTE! If you intend to place this on an NFS (or otherwise network)
    # mounted filesystem then please read the LockFile documentation
    # (available at <URL:<a class="jive-link-external-small" href="http://">http://www.apache.org/docs/mod/core.html#lockfile>);
    # you will save yourself a lot of trouble.
    ServerRoot "/usr"
    # The LockFile directive sets the path to the lockfile used when Apache
    # is compiled with either USEFCNTL_SERIALIZEDACCEPT or
    # USEFLOCK_SERIALIZEDACCEPT. This directive should normally be left at
    # its default value. The main reason for changing it is if the logs
    # directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
    # DISK. The PID of the main server process is automatically appended to
    # the filename.
    #LockFile "/private/var/run/httpd.lock"
    # PidFile: The file in which the server should record its process
    # identification number when it starts.
    PidFile "/private/var/run/httpd.pid"
    # ScoreBoardFile: File used to store internal server process information.
    # Not all architectures require this. But if yours does (you'll know because
    # this file will be created when you run Apache) then you must ensure that
    # no two invocations of Apache share the same scoreboard file.
    ScoreBoardFile "/private/var/run/httpd.scoreboard"
    # In the standard configuration, the server will process httpd.conf (this
    # file, specified by the -f command line option), srm.conf, and access.conf
    # in that order. The latter two files are now distributed empty, as it is
    # recommended that all directives be kept in a single file for simplicity.
    # The commented-out values below are the built-in defaults. You can have the
    # server ignore these files altogether by using "/dev/null" (for Unix) or
    # "nul" (for Win32) for the arguments to the directives.
    #ResourceConfig /private/etc/httpd/srm.conf
    #AccessConfig /private/etc/httpd/access.conf
    # Timeout: The number of seconds before receives and sends time out.
    Timeout 300
    # KeepAlive: Whether or not to allow persistent connections (more than
    # one request per connection). Set to "Off" to deactivate.
    KeepAlive On
    # MaxKeepAliveRequests: The maximum number of requests to allow
    # during a persistent connection. Set to 0 to allow an unlimited amount.
    # We recommend you leave this number high, for maximum performance.
    MaxKeepAliveRequests 100
    # KeepAliveTimeout: Number of seconds to wait for the next request from the
    # same client on the same connection.
    KeepAliveTimeout 15
    # Server-pool size regulation. Rather than making you guess how many
    # server processes you need, Apache dynamically adapts to the load it
    # sees --- that is, it tries to maintain enough server processes to
    # handle the current load, plus a few spare servers to handle transient
    # load spikes (e.g., multiple simultaneous requests from a single
    # Netscape browser).
    # It does this by periodically checking how many servers are waiting
    # for a request. If there are fewer than MinSpareServers, it creates
    # a new spare. If there are more than MaxSpareServers, some of the
    # spares die off. The default values are probably OK for most sites.
    MinSpareServers 5
    MaxSpareServers 10
    # Number of servers to start initially --- should be a reasonable ballpark
    # figure.
    StartServers 5
    # Limit on total number of servers running, i.e., limit on the number
    # of clients who can simultaneously connect --- if this limit is ever
    # reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
    # It is intended mainly as a brake to keep a runaway server from taking
    # the system with it as it spirals down...
    MaxClients 150
    # MaxRequestsPerChild: the number of requests each child process is
    # allowed to process before the child dies. The child will exit so
    # as to avoid problems after prolonged use when Apache (and maybe the
    # libraries it uses) leak memory or other resources. On most systems, this
    # isn't really needed, but a few (such as Solaris) do have notable leaks
    # in the libraries. For these platforms, set to something like 10000
    # or so; a setting of 0 means unlimited.
    # NOTE: This value does not include keepalive requests after the initial
    # request per connection. For example, if a child process handles
    # an initial request and 10 subsequent "keptalive" requests, it
    # would only count as 1 request towards this limit.
    MaxRequestsPerChild 0
    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, instead of the default. See also the <VirtualHost>
    # directive.
    #Listen 3000
    #Listen 12.34.56.78:80
    # BindAddress: You can support virtual hosts with this option. This directive
    # is used to tell the server which IP address to listen to. It can either
    # contain "*", an IP address, or a fully qualified Internet domain name.
    # See also the <VirtualHost> and Listen directives.
    #BindAddress *
    # Dynamic Shared Object (DSO) Support
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule' lines at this location so the
    # directives contained in it are actually available before they are used.
    # Please read the file http://httpd.apache.org/docs/dso.html for more
    # details about the DSO mechanism and run `httpd -l' for the list of already
    # built-in (statically linked and thus always available) modules in your httpd
    # binary.
    # Note: The order in which modules are loaded is important. Don't change
    # the order below without expert advice.
    # Example:
    # LoadModule foo_module libexec/mod_foo.so
    #LoadModule vhostaliasmodule libexec/httpd/modvhostalias.so
    #LoadModule env_module libexec/httpd/mod_env.so
    LoadModule configlogmodule libexec/httpd/modlogconfig.so
    #LoadModule mimemagicmodule libexec/httpd/modmimemagic.so
    LoadModule mime_module libexec/httpd/mod_mime.so
    LoadModule negotiation_module libexec/httpd/mod_negotiation.so
    #LoadModule status_module libexec/httpd/mod_status.so
    #LoadModule info_module libexec/httpd/mod_info.so
    LoadModule includes_module libexec/httpd/mod_include.so
    LoadModule autoindex_module libexec/httpd/mod_autoindex.so
    LoadModule dir_module libexec/httpd/mod_dir.so
    LoadModule cgi_module libexec/httpd/mod_cgi.so
    LoadModule asis_module libexec/httpd/mod_asis.so
    LoadModule imap_module libexec/httpd/mod_imap.so
    LoadModule action_module libexec/httpd/mod_actions.so
    #LoadModule speling_module libexec/httpd/mod_speling.so
    LoadModule userdir_module libexec/httpd/mod_userdir.so
    LoadModule alias_module libexec/httpd/mod_alias.so
    LoadModule rewrite_module libexec/httpd/mod_rewrite.so
    LoadModule access_module libexec/httpd/mod_access.so
    LoadModule auth_module libexec/httpd/mod_auth.so
    #LoadModule anonauthmodule libexec/httpd/modauthanon.so
    #LoadModule dbmauthmodule libexec/httpd/modauthdbm.so
    #LoadModule digest_module libexec/httpd/mod_digest.so
    #LoadModule proxy_module libexec/httpd/libproxy.so
    #LoadModule cernmetamodule libexec/httpd/modcernmeta.so
    #LoadModule expires_module libexec/httpd/mod_expires.so
    #LoadModule headers_module libexec/httpd/mod_headers.so
    #LoadModule usertrack_module libexec/httpd/mod_usertrack.so
    LoadModule logforensicmodule libexec/httpd/modlogforensic.so
    #LoadModule uniqueidmodule libexec/httpd/moduniqueid.so
    LoadModule setenvif_module libexec/httpd/mod_setenvif.so
    #LoadModule dav_module libexec/httpd/libdav.so
    #LoadModule ssl_module libexec/httpd/libssl.so
    #LoadModule perl_module libexec/httpd/libperl.so
    LoadModule php4_module libexec/httpd/libphp4.so
    LoadModule hfsapplemodule libexec/httpd/modhfsapple.so
    # Reconstruction of the complete module list from all available modules
    # (static and shared ones) to achieve correct module execution order.
    # [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
    ClearModuleList
    #AddModule modvhostalias.c
    #AddModule mod_env.c
    AddModule modlogconfig.c
    #AddModule modmimemagic.c
    AddModule mod_mime.c
    AddModule mod_negotiation.c
    #AddModule mod_status.c
    #AddModule mod_info.c
    AddModule mod_include.c
    AddModule mod_autoindex.c
    AddModule mod_dir.c
    AddModule mod_cgi.c
    AddModule mod_asis.c
    AddModule mod_imap.c
    AddModule mod_actions.c
    #AddModule mod_speling.c
    AddModule mod_userdir.c
    AddModule mod_alias.c
    AddModule mod_rewrite.c
    AddModule mod_access.c
    AddModule mod_auth.c
    #AddModule modauthanon.c
    #AddModule modauthdbm.c
    #AddModule mod_digest.c
    #AddModule mod_proxy.c
    #AddModule modcernmeta.c
    #AddModule mod_expires.c
    #AddModule mod_headers.c
    #AddModule mod_usertrack.c
    AddModule modlogforensic.c
    #AddModule moduniqueid.c
    AddModule mod_so.c
    AddModule mod_setenvif.c
    #AddModule mod_dav.c
    #AddModule mod_ssl.c
    #AddModule mod_perl.c
    AddModule mod_php4.c
    AddModule modhfsapple.c
    # ExtendedStatus controls whether Apache will generate "full" status
    # information (ExtendedStatus On) or just basic information (ExtendedStatus
    # Off) when the "server-status" handler is called. The default is Off.
    #ExtendedStatus On
    ### Section 2: 'Main' server configuration
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition. These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    # If your ServerType directive (set earlier in the 'Global Environment'
    # section) is set to "inetd", the next few directives don't have any
    # effect since their settings are defined by the inetd configuration.
    # Skip ahead to the ServerAdmin directive.
    # Port: The port to which the standalone server listens. For
    # ports < 1023, you will need httpd to be run as root initially.
    Port 80
    # If you wish httpd to run as a different user or group, you must run
    # httpd as root initially and it will switch.
    # User/Group: The name (or #number) of the user/group to run httpd as.
    # . On SCO (ODT 3) use "User nouser" and "Group nogroup".
    # . On HPUX you may not be able to use shared memory as nobody, and the
    # suggested workaround is to create a user www and use that user.
    # NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
    # when the value of (unsigned)Group is above 60000;
    # don't use Group "#-1" on these systems!
    User nobody
    Group nobody
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed. This address appears on some server-generated pages, such
    # as error documents.
    ServerAdmin [email protected]
    # ServerName allows you to set a host name which is sent back to clients for
    # your server if it's different than the one the program would get (i.e., use
    # "www" instead of the host's real name).
    # Note: You cannot just invent host names and hope they work. The name you
    # define here must be a valid DNS name for your host. If you don't understand
    # this, ask your network administrator.
    # If your host doesn't have a registered DNS name, enter its IP address here.
    # You will have to access it by its address (e.g., http://123.45.67.89/)
    # anyway, and this will make redirections work in a sensible way.
    # 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your
    # machine always knows itself by this address. If you use Apache strictly for
    # local testing and development, you may use 127.0.0.1 as the server name.
    #ServerName new.host.name
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    DocumentRoot "/Library/WebServer/Documents"
    # Each directory to which Apache has access, can be configured with respect
    # to which services and features are allowed and/or disabled in that
    # directory (and its subdirectories).
    # First, we configure the "default" to be a very restrictive set of
    # permissions.
    <Directory />
    Options FollowSymLinks
    AllowOverride None
    </Directory>
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    # This should be changed to whatever you set DocumentRoot to.
    <Directory "/Library/WebServer/Documents">
    # This may also be "None", "All", or any combination of "Indexes",
    # "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
    # Note that "MultiViews" must be named explicitly --- "Options All"
    # doesn't give it to you.
    Options Indexes FollowSymLinks MultiViews
    # This controls which options the .htaccess files in directories can
    # override. Can also be "All", or any combination of "Options", "FileInfo",
    # "AuthConfig", and "Limit"
    AllowOverride None
    # Controls who can get stuff from this server.
    Order allow,deny
    Allow from all
    </Directory>
    # UserDir: The name of the directory which is appended onto a user's home
    # directory if a ~user request is received.
    <IfModule mod_userdir.c>
    UserDir public_html
    </IfModule>
    #<IfModule mod_php4.c>
    AddType application/x-httpd-php .php
    #AddType application/x-httpd-php .php4
    #AddType application/x-httpd-php-source .phps
    #</IfModule>
    # Control access to UserDir directories. The following is an example
    # for a site where these directories are restricted to read-only.
    #<Directory /home/*/public_html>
    # AllowOverride FileInfo AuthConfig Limit
    # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
    # <Limit GET POST OPTIONS PROPFIND>
    # Order allow,deny
    # Allow from all
    # </Limit>
    # <LimitExcept GET POST OPTIONS PROPFIND>
    # Order deny,allow
    # Deny from all
    # </LimitExcept>
    #</Directory>
    # DirectoryIndex: Name of the file or files to use as a pre-written HTML
    # directory index. Separate multiple entries with spaces.
    <IfModule mod_dir.c>
    DirectoryIndex index.html index.php index.htm
    </IfModule>
    # AccessFileName: The name of the file to look for in each directory
    # for access control information.
    AccessFileName .htaccess
    # The following lines prevent .htaccess files from being viewed by
    # Web clients. Since .htaccess files often contain authorization
    # information, access is disallowed for security reasons. Comment
    # these lines out if you want Web visitors to see the contents of
    # .htaccess files. If you change the AccessFileName directive above,
    # be sure to make the corresponding changes here.
    # Also, folks tend to use names such as .htpasswd for password
    # files, so this will protect those as well.
    <Files ~ "^\.([Hh][Tt]|[Dd][Ss]_[Ss])">
    Order allow,deny
    Deny from all
    Satisfy All
    </Files>
    # Apple specific filesystem protection.
    <Files "rsrc">
    Order allow,deny
    Deny from all
    Satisfy All
    </Files>
    <Directory ~ ".*\.\.namedfork">
    Order allow,deny
    Deny from all
    Satisfy All
    </Directory>
    # CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
    # document that was negotiated on the basis of content. This asks proxy
    # servers not to cache the document. Uncommenting the following line disables
    # this behavior, and proxies will be allowed to cache the documents.
    #CacheNegotiatedDocs
    # UseCanonicalName: (new for 1.3) With this setting turned on, whenever
    # Apache needs to construct a self-referencing URL (a URL that refers back
    # to the server the response is coming from) it will use ServerName and
    # Port to form a "canonical" name. With this setting off, Apache will
    # use the hostname:port that the client supplied, when possible. This
    # also affects SERVER_NAME and SERVER_PORT in CGI scripts.
    UseCanonicalName On
    # TypesConfig describes where the mime.types file (or equivalent) is
    # to be found.
    <IfModule mod_mime.c>
    TypesConfig /private/etc/httpd/mime.types
    </IfModule>
    # DefaultType is the default MIME type the server will use for a document
    # if it cannot otherwise determine one, such as from filename extensions.
    # If your server contains mostly text or HTML documents, "text/plain" is
    # a good value. If most of your content is binary, such as applications
    # or images, you may want to use "application/octet-stream" instead to
    # keep browsers from trying to display binary files as though they are
    # text.
    DefaultType text/plain
    # The modmimemagic module allows the server to use various hints from the
    # contents of the file itself to determine its type. The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    # modmimemagic is not part of the default server (you have to add
    # it yourself with a LoadModule [see the DSO paragraph in the 'Global
    # Environment' section], or recompile the server and include modmimemagic
    # as part of the configuration), so it's enclosed in an <IfModule> container.
    # This means that the MIMEMagicFile directive will only be processed if the
    # module is part of the server.
    <IfModule modmimemagic.c>
    MIMEMagicFile /private/etc/httpd/magic
    </IfModule>
    # HostnameLookups: Log the names of clients or just their IP addresses
    # e.g., www.apache.org (on) or 204.62.129.132 (off).
    # The default is off because it'd be overall better for the net if people
    # had to knowingly turn this feature on, since enabling it means that
    # each client request will result in AT LEAST one lookup request to the
    # nameserver.
    HostnameLookups Off
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here. If you do define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    ErrorLog "/private/var/log/httpd/error_log"
    # LogLevel: Control the number of messages logged to the error_log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    LogLevel warn
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    LogFormat "%{Referer}i -> %U" referer
    LogFormat "%{User-agent}i" agent
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here. Contrariwise, if you do
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and not in this file.
    CustomLog "/private/var/log/httpd/access_log" common
    # If you would like to have agent and referer logfiles, uncomment the
    # following directives.
    #CustomLog "/private/var/log/httpd/referer_log" referer
    #CustomLog "/private/var/log/httpd/agent_log" agent
    # If you prefer a single logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #CustomLog "/private/var/log/httpd/access_log" combined
    # Optionally add a line containing the server version and virtual host
    # name to server-generated pages (error documents, FTP directory listings,
    # mod_status and mod_info output etc., but not CGI generated documents).
    # Set to "EMail" to also include a mailto: link to the ServerAdmin.
    # Set to one of: On | Off | EMail
    ServerSignature On
    # EBCDIC configuration:
    # (only for mainframes using the EBCDIC codeset, currently one of:
    # Fujitsu-Siemens' BS2000/OSD, IBM's OS/390 and IBM's TPF)!!
    # The following default configuration assumes that "text files"
    # are stored in EBCDIC (so that you can operate on them using the
    # normal POSIX tools like grep and sort) while "binary files" are
    # stored with identical octets as on an ASCII machine.
    # The directives are evaluated in configuration file order, with
    # the EBCDICConvert directives applied before EBCDICConvertByType.
    # If you want to have ASCII HTML documents and EBCDIC HTML documents
    # at the same time, you can use the file extension to force
    # conversion off for the ASCII documents:
    # > AddType text/html .ahtml
    # > EBCDICConvert Off=InOut .ahtml
    # EBCDICConvertByType On=InOut text/* message/* multipart/*
    # EBCDICConvertByType On=In application/x-www-form-urlencoded
    # EBCDICConvertByType On=InOut application/postscript model/vrml
    # EBCDICConvertByType Off=InOut /
    # Aliases: Add here as many aliases as you need (with no limit). The format is
    # Alias fakename realname
    <IfModule mod_alias.c>
    # Note that if you include a trailing / on fakename then the server will
    # require it to be present in the URL. So "/icons" isn't aliased in this
    # example, only "/icons/". If the fakename is slash-terminated, then the
    # realname must also be slash terminated, and if the fakename omits the
    # trailing slash, the realname must also omit it.
    Alias /icons/ "/usr/share/httpd/icons/"
    <Directory "/usr/share/httpd/icons">
    Options Indexes MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
    </Directory>
    # This Alias will project the on-line documentation tree under /manual/
    # even if you change the DocumentRoot. Comment it if you don't want to
    # provide access to the on-line documentation.
    Alias /manual/ "/Library/WebServer/Documents/manual/"
    <Directory "/Library/WebServer/Documents/manual">
    Options Indexes FollowSymlinks MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
    </Directory>
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the realname directory are treated as applications and
    # run by the server when requested rather than as documents sent to the client.
    # The same rules about trailing "/" apply to ScriptAlias directives as to
    # Alias.
    ScriptAlias /cgi-bin/ "/Library/WebServer/CGI-Executables/"
    # "/Library/WebServer/CGI-Executables" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    <Directory "/Library/WebServer/CGI-Executables">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
    </Directory>
    </IfModule>
    # End of aliases.
    # Redirect allows you to tell clients about documents which used to exist in
    # your server's namespace, but do not anymore. This allows you to tell the
    # clients where to look for the relocated document.
    # Format: Redirect old-URI new-URL
    # Directives controlling the display of server-generated directory listings.
    <IfModule mod_autoindex.c>
    # FancyIndexing is whether you want fancy directory indexing or standard
    IndexOptions FancyIndexing
    # AddIcon* directives tell the server which icon to show for different
    # files or filename extensions. These are only displayed for
    # FancyIndexed directories.
    AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
    AddIconByType (TXT,/icons/text.gif) text/*
    AddIconByType (IMG,/icons/image2.gif) image/*
    AddIconByType (SND,/icons/sound2.gif) audio/*
    AddIconByType (VID,/icons/movie.gif) video/*
    AddIcon /icons/binary.gif .bin .exe
    AddIcon /icons/binhex.gif .hqx
    AddIcon /icons/tar.gif .tar
    AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
    AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
    AddIcon /icons/a.gif .ps .ai .eps
    AddIcon /icons/layout.gif .html .shtml .htm .pdf
    AddIcon /icons/text.gif .txt
    AddIcon /icons/c.gif .c
    AddIcon /icons/p.gif .pl .py
    AddIcon /icons/f.gif .for
    AddIcon /icons/dvi.gif .dvi
    AddIcon /icons/uuencoded.gif .uu
    AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
    AddIcon /icons/tex.gif .tex
    AddIcon /icons/bomb.gif core
    AddIcon /icons/back.gif ..
    AddIcon /icons/hand.right.gif README
    AddIcon /icons/folder.gif ^^DIRECTORY^^
    AddIcon /icons/blank.gif ^^BLANKICON^^
    # DefaultIcon is which icon to show for files which do not have an icon
    # explicitly set.
    DefaultIcon /icons/unknown.gif
    # AddDescription allows you to place a short description after a file in
    # server-generated indexes. These are only displayed for FancyIndexed
    # directories.
    # Format: AddDescription "description" filename
    #AddDescription "GZIP compressed document" .gz
    #AddDescription "tar archive" .tar
    #AddDescription "GZIP compressed tar archive" .tgz
    # ReadmeName is the name of the README file the server will look for by
    # default, and append to directory listings.
    # HeaderName is the name of a file which should be prepended to
    # directory indexes.
    ReadmeName README.html
    HeaderName HEADER.html
    # IndexIgnore is a set of filenames which directory indexing should ignore
    # and not include in the listing. Shell-style wildcarding is permitted.
    IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
    </IfModule>
    # End of indexing directives.
    # Document types.
    <IfModule mod_mime.c>
    # AddLanguage allows you to specify the language of a document. You can
    # then use content negotiation to give a browser a file in a language
    # it can understand.
    # Note 1: The suffix does not have to be the same as the language
    # keyword --- those with documents in Polish (whose net-standard
    # language code is pl) may wish to use "AddLanguage pl .po" to
    # avoid the ambiguity with the common suffix for perl scripts.
    # Note 2: The example entries below illustrate that in quite
    # some cases the two character 'Language' abbreviation is not
    # identical to the two character 'Country' code for its country,
    # E.g. 'Danmark/dk' versus 'Danish/da'.
    # Note 3: In the case of 'ltz' we violate the RFC by using a three char
    # specifier. But there is 'work in progress' to fix this and get
    # the reference data for rfc1766 cleaned up.
    # Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
    # French (fr) - German (de) - Greek-Modern (el)
    # Italian (it) - Korean (kr) - Norwegian (no) - Norwegian Nynorsk (nn)
    # Portugese (pt) - Luxembourgeois* (ltz)
    # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cs)
    # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
    # Russian (ru)
    AddLanguage da .dk
    AddLanguage nl .nl
    AddLanguage en .en
    AddLanguage et .ee
    AddLanguage fr .fr
    AddLanguage de .de
    AddLanguage el .el
    AddLanguage he .he
    AddCharset ISO-8859-8 .iso8859-8
    AddLanguage it .it
    AddLanguage ja .ja
    AddCharset ISO-2022-JP .jis
    AddLanguage kr .kr
    AddCharset ISO-2022-KR .iso-kr
    AddLanguage nn .nn
    AddLanguage no .no
    AddLanguage pl .po
    AddCharset ISO-8859-2 .iso-pl
    AddLanguage pt .pt
    AddLanguage pt-br .pt-br
    AddLanguage ltz .lu
    AddLanguage ca .ca
    AddLanguage es .es
    AddLanguage sv .sv
    AddLanguage cs .cz .cs
    AddLanguage ru .ru
    AddLanguage zh-TW .zh-tw
    AddCharset Big5 .Big5 .big5
    AddCharset WINDOWS-1251 .cp-1251
    AddCharset CP866 .cp866
    AddCharset ISO-8859-5 .iso-ru
    AddCharset KOI8-R .koi8-r
    AddCharset UCS-2 .ucs2
    AddCharset UCS-4 .ucs4
    AddCharset UTF-8 .utf8
    # LanguagePriority allows you to give precedence to some languages
    # in case of a tie during content negotiation.
    # Just list the languages in decreasing order of preference. We have
    # more or less alphabetized them here. You probably want to change this.
    <IfModule mod_negotiation.c>
    LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ru ltz ca es sv tw
    </IfModule>
    # AddType allows you to tweak mime.types without actually editing it, or to
    # make certain files to be certain types.
    AddType application/x-tar .tgz
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    # Despite the name similarity, the following Add* directives have nothing
    # to do with the FancyIndexing customization directives above.
    AddEncoding x-compress .Z
    AddEncoding x-gzip .gz .tgz
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #AddType application/x-compress .Z
    #AddType application/x-gzip .gz .tgz
    # AddHandler allows you to map certain file extensions to "handlers",
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action command (see below)
    # If you want to use server side includes, or CGI outside
    # ScriptAliased directories, uncomment the following lines.
    # To use CGI scripts:
    #AddHandler cgi-script .cgi
    # To use server-parsed HTML files
    #AddType text/html .shtml
    #AddHandler server-parsed .shtml
    # Uncomment the following line to enable Apache's send-asis HTTP file
    # feature
    #AddHandler send-as-is asis
    # If you wish to use server-parsed imagemap files, use
    #AddHandler imap-file map
    # To enable type maps, you might want to use
    #AddHandler type-map var
    </IfModule>
    # End of document types.
    # Action lets you define media types that will execute a script whenever
    # a matching file is called. This eliminates the need for repeated URL
    # pathnames for oft-used CGI file processors.
    # Format: Action media/type /cgi-script/location
    # Format: Action handler-name /cgi-script/location
    # MetaDir: specifies the name of the directory in which Apache can find
    # meta information files. These files contain additional HTTP headers
    # to include when sending the document
    #MetaDir .web
    # MetaSuffix: specifies the file name suffix for the file containing the
    # meta information.
    #MetaSuffix .meta
    # Customizable error response (Apache style)
    # these come in three flavors
    # 1) plain text
    #ErrorDocument 500 "The server made a boo boo.
    # n.b. the single leading (") marks it as text, it does not get output
    # 2) local redirects
    #ErrorDocument 404 /missing.html
    # to redirect to local URL /missing.html
    #ErrorDocument 404 /cgi-bin/missing_handler.pl
    # N.B.: You can redirect to a script or a document using server-side-includes.
    # 3) external redirects
    #ErrorDocument 402 http://some.other-server.com/subscription_info.html
    # N.B.: Many of the environment variables associated with the original
    # request will not be available to such a script.
    # Customize behaviour based on the browser
    <IfModule mod_setenvif.c>
    # The following directives modify normal HTTP response behavior.
    # The first directive disables keepalive for Netscape 2.x and browsers that
    # spoof it. There are known problems with these browser implementations.
    # The second directive is for Microsoft Internet Explorer 4.0b2
    # which has a broken HTTP/1.1 implementation and does not properly
    # support keepalive when it is used on 301 or 302 (redirect) responses.
    BrowserMatch "Mozilla/2" nokeepalive
    BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
    # The following directive disables HTTP/1.1 responses to browsers which
    # are in violation of the HTTP/1.0 spec by not being able to grok a
    # basic 1.1 response.
    BrowserMatch "RealPlayer 4\.0" force-response-1.0
    BrowserMatch "Java/1\.0" force-response-1.0
    BrowserMatch "JDK/1\.0" force-response-1.0
    </IfModule>
    # End of browser customization directives
    # Allow server status reports, with the URL of http://servername/server-status
    # Change the ".your-domain.com" to match your domain to enable.
    #<Location /server-status>
    # SetHandler server-status
    # Order deny,allow
    # Deny from all
    # Allow from .your-domain.com
    #</Location>
    # Allow remote server configuration reports, with the URL of
    # http://servername/server-info (requires that mod_info.c be loaded).
    # Change the ".your-domain.com" to match your domain to enable.
    #<Location /server-info>
    # SetHandler server-info
    # Order deny,allow
    # Deny from all
    # Allow from .your-domain.com
    #</Location>
    # There have been reports of people trying to abuse an old bug from pre-1.1
    # days. This bug involved a CGI script distributed as a part of Apache.
    # By uncommenting these lines you can redirect these attacks to a logging
    # script on phf.apache.org. Or, you can record them yourself, using the script
    # support/phfabuselog.cgi.
    #<Location /cgi-bin/phf*>
    # Deny from all
    # ErrorDocument 403 http://phf.apache.org/phfabuselog.cgi
    #</Location>
    # Proxy Server directives. Uncomment the following lines to
    # enable the proxy server:
    #<IfModule mod_proxy.c>
    # ProxyRequests On
    # <Directory proxy:*>
    # Order deny,allow
    # Deny from all
    # Allow from .your-domain.com
    # </Directory>
    # Enable/disable the handling of HTTP/1.1 "Via:" headers.
    # ("Full" adds the server version; "Block" removes all outgoing Via: headers)
    # Set to one of: Off | On | Full | Block
    # ProxyVia On
    # To enable the cache as well, edit and uncomment the following lines:
    # (no cacheing without CacheRoot)
    # CacheRoot "/private/var/run/proxy"
    # CacheSize 5
    # CacheGcInterval 4
    # CacheMaxExpire 24
    # CacheLastModifiedFactor 0.1
    # CacheDefaultExpire 1
    # NoCache a-domain.com another-domain.edu joes.garage-sale.com
    #</IfModule>
    # End of proxy directives.
    ### Section 3: Virtual Hosts
    # VirtualHost: If you want to maintain multiple domains/hostnames on your
    # machine you can setup VirtualHost containers for them. Most configurations
    # use only name-based virtual hosts so the server doesn't need to worry about
    # IP addresses. This is indicated by the asterisks in the directives below.
    # Please see the documentation at <URL:<a class="jive-link-external-small" href="http://">http://www.apache.org/docs/vhosts/>
    # for further details before you try to setup virtual hosts.
    # You may use the command line option '-S' to verify your virtual host
    # configuration.
    # Use name-based virtual hosting.
    #NameVirtualHost *:80
    # VirtualHost example:
    # Almost any Apache directive may go into a VirtualHost container.
    # The first VirtualHost section is used for requests without a known
    # server name.
    #<VirtualHost *:80>
    # ServerAdmin [email protected]
    # DocumentRoot /www/docs/dummy-host.example.com
    # ServerName dummy-host.example.com
    # ErrorLog logs/dummy-host.example.com-error_log
    # CustomLog logs/dummy-host.example.com-access_log common
    #</VirtualHost>

    gparker03 wrote:
    Holy cow .... http://localhost/index.php is working! So basically the php has to be run ON the apache server correct? How would I get it to run in something like Coda? It's not viewable currently in Coda's preview menu.
    Hmm. I downloaded Coda and messed with it a bit and I can't figure out how to get it to do that. Basically, you'd need a way to get it to recognize that the files need to be previewed with the Apache server instead of just reading them from the temporary files it seems to create. You might have to resort to using two apps open: Coda for editing, then just switch to your regular browser and access it through the "http://localhost" address. That's basically what I do. I edit in TextMate or BBEdit, then use a shortcut like "command-tab" to switch to my browser and preview it there.
    Also mysql is already installed correct?
    No, there's a user created for MySQL, but the server itself isn't installed. The best place to get it is from MySQL's web site. Just make sure you get the right version for your OS and CPU architecture.
    charlie

  • Bootcamp 2.0, Win XP 32bit and beamer / external monitor activation

    Hi,
    similar topics have been posted but I could not find any solution yet...
    My system: MacBook (NOT Pro, Core2Duo, with 10.5 Leopard and Bootcamp 2.0 with Win XP Pro 32bit SP2) and Mini-DVI to DVI adapter.
    Working on Leopard connecting my external monitor (Fujitsu-Siemens P19-2) is working perfectly. It is automatically detected and activated.
    When I connect the monitor on Win XP, the desktop and tasbar flicker/are reloaded, i.e. ANYTHING is detected. However, the monitor is black and says "No signal" and i cannot activate it. I considered/tried:
    - the Windows way: FN + F7 => did not work / is deactivated and tools like Input Remapper didnt work (written for Macbook Pro only afaik)
    - the 2nd Windows way: Display Properties, Settings => any changes without effect
    - via Bootcamp / GMA Driver Properties: no possibility to activate 2nd monitor: Note at "Display Devices"-menu: "Two displays must be connected to the computer before you can use this feature. Please connect another display."
    Therefore my questions:
    - any solution i did not consider?
    - is it a bootcamp / driver issue to be solved in bootcamp updates?
    - is there a keyboard tool similar to inputRemapper for Not-Pro-Macbooks? (To activate not only FN+F7 but also Del and PSC)
    Thanks in advance...
    Ben

    Thing is, I am trying this too. However, the only option I get is to clone the display. This is not what I want, I want to use the TV as the primary display. This way games will startup on the big TV and not on my Macbook Pro. Now I don't get the option to use that TV as a primary display.
    So leaves me with the option to clone the display and have same image rendered on both screens... This is NOT what i want. In Leopard everything works great... obviously...
    PLease let me know if you got any solutions for this

Maybe you are looking for