Fulfillment Error: E_ADEPT_DOCUMENT_TYPE_UNKNOWN
I receive this error when trying to open an .acsm file on my Mac: "Error getting License. License Server Communication Problem: E_ADEPT_DOCUMENT_TYPE_UNKNOWN:" I am running Mac OS X 10.8.2. When I open the ACSM file it is in XML format and is looking for a PDF document.
What do I need to do to actually download the file? Everything else seems to be configured properly in terms of authorization.
Message was edited by: JFS-NJ
I had the following error just today: Error getting License. License Server Communication Problem: E_ADEPT_DOCUMENT_TYPE_UNKNOWN.
I am using a Macbook Pro (2010) OS 10.10.3 and I have downloaded 100 books from KOBO using the ascm format. Usually, as soon as I click on the file in the downloads it opens up Adobe Digital Editions 2.0 and the ascm file loads into my library and opens. Not today with my 101st and 102nd books.
Having read some of the suggestions here I tried a mixture of a few suggestions and had success:
I went into the program Adobe Digital Editions 2.0 on my computer and clicked on Add to Library in the File menu. My computer immediately went to my Downloads but you may need to browse to get to downloads.
I scrolled through to find URLLink-101.ascm but at first it was greyed out and I couldn't select it. I went to the bottom of the screen and changed the Show button to ASCM files rather than PDF/EPUB which is what it had defaulted to. As soon as that was changed I could select URLLink-101.ascm and then clicked ADD at the bottom.
As soon as I had clicked ADD it downloaded straightaway into my library in Adobe Digital Editions 2.0. I then followed the same procedure with the second book I had purchased.
I have no idea why this happened after 100 other books have been downloaded normally. Weird but somewhat easily fixed for me. Hope this helps someone.
Similar Messages
-
EXPLAIN ERROR - E_ADEPT_DOCUMENT_TYPE_UNKNOWN
I am trying to open a .acsm file in Adobe Digital Editions 2.0.67532
I keep getting the error E_ADEPT_DOCUMENT_TYPE_UNKNOWN
I have searched the forum and found this question asked previosuly - but NOT answered.
I would like to know what this means and why I can't download my book.
Very frustrating to try and access customer support from adobe to be thrown over to a forum which has the same questions I seek the answer to posted MONTHS ago - and they are still unanswered. There has to be an easier way!Thanks for the suggestion, but no success - i'm guessing it's due to system restrictions at work.
I had redownloaded the .acsm file a ridiculous amount of times yesterday - i felt like my whole afternoon was a freakish deja vu loop!
I installed 1.7.2 today and attempted the download - now i get a new error message, lucky me
Microsoft Outlook 2007 Programming: Jumpstart for Power Users and Administrators:
IO Error on Network Request.
Please check your network connection and try again.
Network Path:
(LINK REMOVED)
Event Detail:
Error #2038
--- end ---
Annoyingly - I downloaded it at home last night using Adobe Digital Editions 2.0.67532 in about a minute. I put it in dropbox hoping i could access it today from work but to no avail thanks to security. I guess I'm just not meant to tackle this task today! Think I'll bring my laptop into the office next week and print the damn thing and be done with it. -
When I tried to buy my first ebook from WHSmith, I clicked 'buy now' and got the message fulfillment error. But I checked my device and my PC and my Adobe ID and they're all registered and activated. What am I doing wrong?
It may not be you. I don't have any direct experience with WHSmith, but the
error sounds like it's being generated at or from something at their site,
not your ADE. I'd start by checking what the process is at their site.
============ -
Fulfillment error - E_ADEPT_INTERNAL
Hi there,
I am currently evaluating ACS4, and unfortunately I'm seeing an error when attempting fulfillment of a drm'ed epub in Digital Editions:
Error getting license
Server communication problem: E_ADEPT_INTERNAL
The corresponding server side log for the fulfillment WAR contains the following error:
java.lang.NullPointerException
at java.io.ByteArrayInputStream.<init>(ByteArrayInputStream.java:89)
at com.adobe.adept.shared.request.LicenseToken.<init>(LicenseToken.java:100)
at com.adobe.adept.fulfillment.servlet.Fulfill.writeLicense(Fulfill.java:979)
at com.adobe.adept.fulfillment.servlet.Fulfill.doPost(Fulfill.java:1137)
at com.adobe.adept.fulfillment.servlet.Fulfill.doPost(Fulfill.java:73)
at com.adobe.adept.servlet.AdeptServlet.doPost(AdeptServlet.java:184)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:637)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:293)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:849)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.ja va:583)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:454)
at java.lang.Thread.run(Thread.java:619)
I would appreciate any assistance in attempting to resolve this problem. The background is that I am (seemingly) able to package epub books ok, and I am using my own prototype Java code to build and sign a ACS4 fulfillment url. My generated url looks like this:
http://<myfulfillmentserver>/fulfillment/URLLink.acsm?action=enterorder&ordersource=<mydis tributorname>&orderid=1234567890&resid=urn%3Auuid%3A5e092985-794a-468a-905e-f3201c5ee1a9&g bauthdate=02%2F11%2F2010+14%3A45+GMT&dateval=1265899545798&gblver=4&auth=5f0f9af9fd4ccb3dd 3ebaa9ec7c7261a46791059
Invoking this url appears to result in Digital Editions receiving a valid acsm file, it is just the following fulfillment part that I am having a problem with.
When I access the 'statuscheck' for the fulfillment service, everything looks good (all green ticks).
Thanks
Alex.Hi there,
Thanks, I hadn't thought of checking the content but I've tried a few books now that I know to be "well formed", so I think I can eliminate content issues as the cause of this error.
I have double-checked the way I am building the fulfillment url in Java by comparing it with the PHP code in the sample bookstore, and I appear to be generating url's correctly...
From the server side stack trace, it would appear to related to licensing? It's difficult to tell though, as there is not a lot of detailed logging and I don't have access to the source code..... any help would be appreciated!
Thanks -
Requirements not fulfilled for EK01
Hi
I'm trying to invoice some travel expenses (costs) in DP90 and i'm getting a message 'Requirements are not fulfilled for condition EK01' can anyone help.......
Thanks
SaraRefer & Check SAP Note 30903 - V1215: Requirements not fulfilled
If a condition is entered manually and its requirement is not fulfilled, error message V1215 appears: Requirements are not fulfilled for condition Example: Inserting a condition type manually which is not used during automatic pricing due to the requirement not being fulfilled.
Cause and prerequisites
Change in function PRICING_CHECK (LV61AU08): * Bedingungen prüfen
IF KOMT1-KOBED NE 0 AND INCL_KONDITIONEN NE NO.
BEDINGUNG_PRUEFEN-NR = KOMT1-KOBED.
PERFORM (BEDINGUNG_PRUEFEN) IN PROGRAM SAPLV61A.
IF SY-SUBRC NE 0.
MESSAGE E215 WITH KOMT1-KSCHL RAISING CONDITION. "<-- Reason
ENDIF.
Solution
Workaround solution: Since it mostly concerns conditions to which an access sequence is assigned but which is still to be entered manually, you should create an identical condition (apart from the name) which is only to be maintained manually and does not have this requirement. The source code should not be modified for reasons of consistency.
OR
Refer & Check: SAP Note 102060 - Exclusion when changing conditions manually
Symptom
If an exclusion indicator is set for a condition with a condition record and this indicator is called in a requirement assigned to it, the following procedure can cause the condition to exclude itself so that as a result of the error message no further processing is possible: After you manually change the condition affected on the condition screen, you carry out a new pricing and afterwards you change the condition again manually.
Cause and prerequisites
Field KOMP-KZNEP is not initialized correctly in function module PRICING_CHECK.
Solution
The error is corrected in Release 4.5A, an advance correction is attached.
OR
Refer & Check: SAP Note 668362 - Expected customer price /value with IDoc
Symptom
When you create a sales order via IDoc, the expected customer price or customer value can be assigned in segment E1J3P01. For this, condition types JED1 or JED2 are used. These condition types are set as dimension-dependent conditions by default (T685A-J_3ASZCO) and are thus created on schedule line level.
If you change this setting in Customizing, these condition types are created on item level (see Note 191742). Now, if the price or the value have different values within one item in entry segment E1J3P01, it is not possible to create this condition on item level. The system generates error message V1215 'Requirements are not fulfilled for condition JED1/2'.
Reason and Prerequisites
The system behaves correctly. In this case, condition JED1 or JED2 would have to be created explicitly for the respective schedule lines because different values are assigned in entry segment E1J3P01. However, as Customizing was changed for these condition types, this cannot occur. Error message V1215 displayed in this case is, however, incorrect.
Solution
After the implementation of the advance correction, the system does not display error message /AFS/IDOC021 'Item condition JED1/2 for nnn is not identical in all schedule lines'.
Hope it will solve your requirement.
Thanks & Regards
JP
Edited by: J Prakash on May 20, 2010 9:23 AM -
MWST condition type missing in contract creation,VA41
Hi, got a problem here during contract creation. I can't get the MWST show up in the contract condition tab. Analysis result :
010 Access not made (requirement not fulfilled)
Error Message : Pricing error: Mandatory condition MWST is missing
Things I have done :
a) checked pricing procedure V/08
b) created condition records VK11
c) checked customer tax classification : Liable for taxes
d) checked material tax data : Full tax
e) ???
what else did I miss out?
Thanks
AndyOption 1: If you do not want MWST condition as mandatory, then remove the check from check box in the pricing procedure (T.Code: V/08). MWST is tax condition & Tax condition are normally not mandatory, as it may vary according to Business Requirement.
Option 2: <b>"010 Access not made (requirement not fulfilled)"</b>: Check the access sequence maintained for Condition Type MWST (T.Code": V/06). Next, Check the Access Sequence & the access 010 assigned to it. (T.Code:V/07). Check whether Accesses & fields are assigned correctly.
Option 3: Instead of maintaining condition record for access 010, maintain for different combination & check the result. Even in my case, once the access with reference to tax classification did not give desired result, but was achieved bu maintaining another combination.
Regards,
Rajesh Banka
Reward points if helpful. -
Hi all,
we are experiencing this kind of error:
on ade we get
</msg>
<error>E_LIC_LICENSE_SIGN_ERROR http://ebo-ad-03:8080/fulfillment/Fulfill E_LSGN_NO_CERTIFICATE http://eusigningservice.adobe.com/licensesign/Sign http://XXXXXX.XXXXXX.XXXX.com/fulfilment</error>
<dependencies/>
</task>
and on fulfillment.log we get
11 Mar 2011 18:49:29,805 TRACE Fulfill: License sign: https://eusigningservice.adobe.com/licensesign
11 Mar 2011 18:49:30,106 TRACE Fulfill: Done license sign: FAILED
11 Mar 2011 18:49:30,107 TRACE DefaultSQLDatabaseConnection: rollback
11 Mar 2011 18:49:30,107 TRACE DefaultSQLDatabaseConnection: rollback
11 Mar 2011 18:49:30,107 ERROR AdeptServlet: request error [62.211.68.145]: E_LIC_LICENSE_SIGN_ERROR http://ebo-ad-03:8080/fulfillment/Fulfill E_LSGN_NO_CERTIFICATE http%3A%2F%2Feusigningservice.adobe.com%2Flicensesign%2FSign http%3A%2F%2FdXXXXXXXXXXXXXXX%2Ffulfillment
Can you help us ?
Regards
EnricoCould anyone reply to this?
I have several customers with this error today and others keep calling in. I could refer them all to Adobe, but perhaps we can solve this mystery here.
Thaks in advance! -
When trying to open Outlook in Win 8.1 I get the error message:
"Either there is no default mail client or the current mail client cannot fulfill the messaging request. Please run Microsoft Office Outlook and set it as the default mail client."
It eventually opens but none of my Mail accounts load. When I click on one of the accounts I get
"Cannot expand the folder. Internet mail is not registered properly. Re-install and try again."
Outlook is set with all its defaults. I've tried going through the Repair routine for Microsoft Office but it doesn't help.Hi,
To delete a profile, you may try the steps below:
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps
carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs.
1. Press Windows key + R to open the Run command.
2. Type regedit in the Open field and click OK.
3. Locate the key then right click on it and choose Rename:
HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows Messaging Subsystem
4. Type OLD at the end of the name.
5. Try opening Outlook and it may prompt that you need to create a new profile.
I hope this can help.
Regards,
Melon Chen
TechNet Community Support -
I've tried EVERYTHING suggested in this link (http://blog.timolthof.com/outlook-no-default-mail-client-error/) and everything google and bing and still this message keeps popping up. Now when I do a windows search for email, I'm not able to view
the email due to this message.
For the record, I am running W7 Ultimate x64 and connected via Excange Server. I do have another system that is running Office 2010 with none of these problems so I don't know if it's related to Exchange though the searches I've done don't allude
to that.
What's up?Hi,
I understand that when you tried to open Outlook 2010 beta on the Windows 7 64-bit computer, you encountered the following error:
"Either there is not default mail client of the current mail client cannot fulfill the messaging request. Please run Microsoft Outlook and
set it as the default mail client."
You have checked the settings under the registry subkey: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Clients\Mail\Microsoft Outlook
I understand the inconvenience you have encountered and appreciate the time and effort you spent on this issue. Please be assured that I
will try my best to help you.
Now let’s troubleshoot the issue by the suggestions below. Please check the results after each suggestion until the problem is resolved.
Suggestion 1: manually set Outlook 2010 as the default e-mail client on Windows 7:
===================
1.
Click Start.
2.
Type "default programs" in the
Search box.
3.
Click Default Programs under
Programs in the search results.
4.
Now click Set your default programs.
5.
Highlight Microsoft Outlook on the left.
6.
Click Set this program as default.
7.
Click OK.
Suggestion 2: Start the Outlook program in safe mode
==============
1.
Click Start, point to All Programs, and then point to
Microsoft Office.
2.
Press and hold the CTRL key, and then click the Outlook program you want to start.
If the problem does not occur in the safe mode, this issue might be related to some third-party add-ins in the Outlook program, we can try
to disable them. Normally, you could do the following to disable the conflict add-ins in your Outlook program:
Disable add-ins
Click
File menu, click Options >
Add-in, click Go button in the Manage:
Com-in Add.
Check if there are any add-ins,
clear the checkbox to disable them.
Close the Office program and
restart it.
Add one check back each time to the list of Add-In,
restart the Office program, and repeat the above procedure. Once the issue reappears again, we can determine which add-in causes this problem and then disable it.
Suggestion 3: Test the issue with a new Windows user account
==============
We can follow the steps in the articles to create a new user account to test the issue. If the problem does not occur in the new user account, some settings
in the old account are corrupted. We can copy the main user files from the old account to the new account, delete the old account, and then continue using the new account.
For the detailed steps on how to create a new user account and copy data from the old account to the new account, you can refer to the following articles:
For Windows Vista/Windows 7:
http://windows.microsoft.com/en-us/windows-vista/Create-a-user-account
http://windows.microsoft.com/en-us/windows-vista/Fix-a-corrupted-user-profile
Please take your time to try the suggestions and let me know the results at your earliest convenience. . If anything is unclear or if there
is anything I can do for you, please feel free to let me know.
Sally Tang -
Hi, I bought an e-book in PDF format that uses Adobe DRM. I've created an account on adobe.com and tried downloading the book in Adobe Digital Editions on the Mac (as well as the bookstore's e-reader--logged into my Adobe account--on an Android device).
It tries to download the book but get's the following error:
Error getting License. License Server Communication Problem:
E_ADEPT_DOCUMENT_TYPE_UNKNOWN:
Has anyone come across this? Any guidance would be most appreciated!
Thanks!
TonyPlease refer to the KB article, Public Knowledge Base
-
Hi. I need help regarding facebook for blackberry. I cannot post any status update, i keep on receiving an error prompt "the facebook server has returned an unknown error and is not able to fulfill your request. (2001)". it has been like this for the past 3 days. I already did the hard reboot many times, re-send service book though i do'nt think it's needed, and tried uninstalling and reinstalling the facebook application too but still getting the same error everytime i try to post a status update. I can comment to messages on my wall and other profiles, the news feed is updating in time too, i can also log-in and out to facebook with no problem, as well as other applications on my phone like foursquare, BBm, ubersocial, BB protect, BB app world, etc, are all working perfectly fine. And now I don't know what seems to be the problem.
I've already contacted my network provider and told me that the error i'm getting is beyond their scope.
Is anybody having the same problem as mine?
Can someone in BB support team help me regarding this issue and tell me what should I do?
Thank you in advance.I got the same issue !! Since I've updated my Facebook app 2 or 3 week ago !
I can not update my status and check-in ! It gives me "the facebook server has returned an unknown error and is not able to fulfill your request. (2001) "
I can upload photo, put comment on people, like people status/picture. The news feed update perfectly !
I also tryied to uninstall reinstall the app, reboot etc etc ! I still can't update my status !!!! I've installed 3.0.0.17 this morning and the issue is still there...
I've remarked one thing... On my facebook under "privacy setting/the Apps, Games and Websites" I used to have a "blackberry app" installed. It's not there anymore and I didn't remove it.
I don't know how to reinstall it... -
Trying to install iCloud on Win7 get error message either no default mail client or current mail client cannot fulfill messaging request. How fix?
Outlook 2013. Under Start Up Options, I have checked "Make Outlook the default program for E-mail, Contacts, and Calendar".
-
Hi,
If save and send as attachment used in MS Office 2010 then outlook 2010 displays error "Either
there is no default mail client of the current mail client cannot fulfill the messaging request-----error Outlook 2010"
Windows 7 32 bit Enterprise edition and Offoce Professional plus 2010 32 bit is installed in the machine.
I have followed the below troubleshooting steps but still getting the same error.
Method 1:
Followed the Microsoft fix
http://support.microsoft.com/kb/813745
1. On the Windows taskbar, click
Start > Run.
2. In the Open box, type the following text:
3. regedit
4. Press Enter.
5. Go to the following registry key:
6. HKEY_LOCAL_MACHINE\SOFTWARE\Clients\Mail
7. In the right pane, right-click
the following registry value:
8. PreFirstRun
9. Click Delete
10. Click Start, and then click Run.
11. In the Open box, type regedit, and then pressENTER.
12. InRegistry Editor, locate the followingsubkey in the registry:
13. HKEY_LOCAL_MACHINE\Software\Clients\Mail\Microsoft Outlook
14. Select thesubkey, and then pressDELETE.
15. Click
Yes.
Method 2:
Repaired Office
Method 3:
fixmapi.exe. Mapi32.dll
Method 4:
Created the below registry key HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Offlce\15.0\Outlook
Create the following String value if it does not exist: Bitness Set the String value for Bitness to the following if it is not already set to x86
Method 5:
Compared the installed applications
Uninstalled the below program :Microsfot Visuall C++ 2008 Redistributable - x86 - KB2467175" and installed "Microsfot Visuall C++ 2008 Redistributable - x86 - 9.0.21022"
Please help to solve the issue.
Regards,
Boopathi SHi,
Do you mean Send as Attachment button under File>Save & Send>Sending Using E-mail
in Office applications, like Excel or Word?
Is this an issue that come up recently? Have you ever made any changes to your system?
If you have installed multiple e-mail programs on the same computer, please try to make Outlook the default mail client and then try again:
http://office.microsoft.com/en-us/outlook-help/make-outlook-the-default-program-for-email-messages-contacts-and-calendar-HP010355552.aspx
http://support.microsoft.com/kb/223877
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
Adobe reader XI gives error "mail client cannot fulfill the messaging request".
I keep receiving warnings that I need to update Adobe Reader. I currently have the latest version of Adobe Reaxer X (10.1.7). When I click on "Check for Updates" I am told no updates are available.
I have tried installing Adobe Reader XI but, when I launch it, I receive an error message stating that "mail client cannot fulfill the messaging request".
I do not want to use Microsoft Outlook (or any other Mail Client). How do I install Adobe Reader XI without a default Mail Client being required?Hi,
Do you mean Send as Attachment button under File>Save & Send>Sending Using E-mail
in Office applications, like Excel or Word?
Is this an issue that come up recently? Have you ever made any changes to your system?
If you have installed multiple e-mail programs on the same computer, please try to make Outlook the default mail client and then try again:
http://office.microsoft.com/en-us/outlook-help/make-outlook-the-default-program-for-email-messages-contacts-and-calendar-HP010355552.aspx
http://support.microsoft.com/kb/223877
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
Unity Connection 10.5.1: I upgraded the Unity Connection Server from V 9.1. After that, cannot logn to ELM an error message " The server encountered an internal error that prevented it from fulfilling this request." appears. The error further displays "
type: Exception report
message:
description: The server encountered an internal error that prevented it from fulfilling this request.
exception:
ServletException Could not initialize class com.cisco.vos.platform.api.config.UpgradeStatus
root cause:
NoClassDefFoundError Could not initialize class com.cisco.vos.platform.api.config.UpgradeStatus
note: The full stack trace of the root cause is available in the logs.
Has anyone experience this issue? Any solutions? Your assistance is greatly appreciated!Hi Mesut,
you can refer the link for migration
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/10x/upgrade/guide/10xcucrugx/10xcucrug010.html
regds,
aman
Maybe you are looking for
-
Table for GL line items.
Hi , Can anybody tell me what is the table for GL line items in R3 side. Regards,
-
How to use the generated SQL of "Recommendation"
Dear Experts, I am using KXEN recommendation function. After trained the model, I expose the result in form of HANA SQL. However, I am really have no idea how to make this SQL runnable because there are some subqueries like: FROM $Dataset "SPACEIN"
-
VIPs going down frequently in 11gR1 RAC
My 11gr1 RAC virtual IPs are frequently going down, can you please help me how to dig why it is going down and how to make them always up. Thanks, Mahi
-
Personalized mail forms in portal
hi gurus, May i know what's the path to view my personalzed mail forms in the pcui/portal? Is it under the Channels tab? and how do i personalize the forms in pcui/portal?
-
Hi, I've been having constant problems sending MP3 files. I work in music so it's important that this works but it's been steadily getting worse. The average mp3 size for me is around 6.3mb so it's not the file size. The sending bar shows that it get