Full 138257 has overlapping selections with init.138246:No updates into DSO

Hi,
I am loading the data from Sourec to PSA and then into data targets in series. It is BW3.5 version info package.
I got the following issue while loading the data: "Full 138257 has overlapping selections with init.138246:No updates into CRFDS121 (Its a DSO)".
The request for Initialization got activated but when i doing Full load it is getting the above error.
Any one can please answer my question..
Thanks in advance,
Phani.

Hi Prashanth,
First I done the Init load without Data option and activated it. And then run the full load in another request and trying to activating....here it is giving that error message. (And one more thing is in that DSO, "Active Data Automatically" setting check box has Enabled. It means the DSO will be Activated automatically once the data got loaded into DSO.)
Do i need to delete the full request before running the Repqir full request?
Thanks,
Phani.

Similar Messages

Problems with transformation; infoobject not updated in DSO.

Hi all,
We are having some problems with one of our transformations between PSA and DSO.
Suddenly some of the fields are not filled in the DSO. The mapping for field Sales order number worked fine, and then I added an infoObject in the DSO to hold the info for Sales order item. I also replaced the infoobject that was supposed to hold the sales order number. After this, none of the two fields has any data in DSO. I checked the PSA, and the data is available here. I tested the rule in Rule details and for sales order number it gives the correct result, but for sales order item it gives a runtime error; assertion failed. I checked on SAP Notes, and found 929934. But the corrections are already added in our system.
Has anyone got any ideas on what to do?
BR,
Linda

Hi,
There are a number of problems in Transformation when either a source field or target field is changed.
This can lead to inconsistent transformation.
You can raise a message to SAP or best thing is if possible delete the Transformation and create a new one.
Regards,
Nitin

Know how many JPanel has been selected

Hi, i had somethings to do, and i really dont figure how to do it, i have an applet that is a kind of paint, and each draw is done on a new JPanel so is there a way to know which JPanel the user has select if i want to be able to select more than one JPanel. Dont know if you understand, my english isnt so good... Could be like a selection tool but i want to know which JPanel has been selected between x,y and width,height of a rectangle made with the mouse....
thx for the help

i could go with a getComponentAt to know which one has been under the selected rectangle, but dont know how can i move it all after i know which one has been selected with the mouse

Has ayone experienced any problems withe latest apple tv update

who has experienced problems withe latest apple tv update???

Welcome to the Apple community.
There are always a few that experience some problem or other after an update. Exactly what problems are you having please.

Why can't I launch another app using a URL scheme in a web clip set up through Configurator with the "full screen app" option selected?

My company uses web clips on iOS devices, set up through profiles on Configurator, for EVERYTHING. Most of these web clips have a transfer function on the site that allows the user to bring up other apps, like directions to a destination in Google Maps for instance (a URL scheme.) If the option for the web clip to appear as a "full screen app" is selected in Configurator (or iPhone Configuration Utility), this fuction does not work on devices that are running iOS 7. It is imparative to our company that the web clips be full page so there is no address bar, back button, etc. for the users to access. With this feature not working, I have 50+ iOS devices that are usless to us.
iOS 6 Device --> Configurator 1.3 --> Full Screen Web Clip --> WORKS
iOS 6 Device --> Configurator 1.4 --> Full Screen Web Clip --> WORKS
iOS 6 Device --> iPhone Configuration Utility --> Full Screen Web Clip --> WORKS
iOS 7 Device --> Configurator 1.3 --> Full Screen Web Clip --> DOESN'T WORK
iOS 7 Device --> Configurator 1.4 --> Full Screen Web Clip --> DOESN'T WORK
iOS 7 Device --> iPhone Configuration Utility --> Full Screen Web Clip --> DOESN'T WORK
iOS 7 Device --> Configurator 1.3 --> NOT Full Screen Web Clip --> WORKS
iOS 7 Device --> Configurator 1.4 --> NOT Full Screen Web Clip--> WORKS
iOS 7 Device --> iPhone Configuration Utility --> NOT Full Screen Web Clip --> WORKS
Somebody, please help!

Phil, I have been trying to figure out a solution to this problem since iOS 7 came out. In hindsight, I should have downloaded the beta versions of the iOS so I would have had even more time. I have talked with quite a few different developers and up until today it was a consensus that this was a "feature" of iOS in an attempt by Apple to diminish the use of webapps. Now most of these people wouldn't be considered apple apologists by any stretch, which could have contributed to their pessimism. That being said, today I finally received some news that could give us a glimmer of hope. I spent almost 2 hours on the phone today being sent "up the ladder" until I think I found the right person to help (I'm not complaining; I was surprised at how competent and helpful each person that I spoke with was, and I didn't have to explain the situation over and over again.) I think what took so long finding the right person to speak with was that this isn't an issue that any type of troubleshooting would fix. It's not an iPad, iPhone, or even an Apple Configurator issue; it's actually a bug in iOS 7. Anyways, the senior engineer that I spoke with reassured me, very adamantly, that this was not a feature of the new operating system and most definitely a bug. He said that they take webapps very seriously and are actually looking for ways to improve how webapps work on iOS devices and how they are used with Mobile Device Management software, like Configurator. I was a little concerned that he said this was the first he or anyone on his team has heard about this problem, but he did work extensively with me today and said that it looks to be a major issue, and something that he and his team are going to try to figure out as soon as possible. He said he would be calling me by Tuesday with information on how and when this will be fixed. Jon

Error in procedure with cursor which has a select query in NVL

cursor has a select statement in the NVL functiion
sample query in given
SELECT fu.user_name Core_ID,
fu.description User_Name,
fu.LAST_LOGON_DATE LAST_LOGON_DATE,
TRUNC(SYSDATE) - TRUNC(fu.LAST_LOGON_DATE) DAYS_SINCE_LAST_LOGON,
NVL((SELECT 'YES' FROM custmot.moto_rma_approvers mra
WHERE mra.primary_approver = fu.user_name),'NO') PRIMARY_RMA_APPROVER,
NVL((SELECT 'YES' FROM custmot.moto_rma_approvers mra
WHERE mra.secondary_approver = fu.user_name), 'YES', 'ALL RESPONSIBILITIES',
DECODE(fu.employee_id, NULL, 'USER ACCOUNT', 'ALL RESPONSIBILITIES' ))) END_DATE_WHAT
FROM apps.fnd_user fu
This query runs fine when it is run seperately. But when its defined in cursor in a procedure it throws up the following error.
"Encountered the symbol "SELECT" when expecting one of the following:
( - + mod not null others <an identifier>
<a double-quoted delimited-identifier> <a bind variable> avg
count c"
can you please help us with this

I noticed your statement has one additional end-bracket at the end. Probably this is just a typo. It should read like this:
SELECT fu.user_name core_id,
       fu.description user_name,
       fu.last_logon_date last_logon_date,
       TRUNC (SYSDATE) - TRUNC (fu.last_logon_date) days_since_last_logon,
       NVL ((SELECT 'YES'
               FROM custmot.moto_rma_approvers mra
              WHERE mra.primary_approver = fu.user_name), 'NO')
                                                         primary_rma_approver,
       NVL ((SELECT 'YES'
               FROM custmot.moto_rma_approvers mra
              WHERE mra.secondary_approver = fu.user_name),
            'YES',
            'ALL RESPONSIBILITIES',
            DECODE (fu.employee_id,
                    NULL, 'USER ACCOUNT',
                    'ALL RESPONSIBILITIES'
           ) end_date_what
FROM apps.fnd_user fuIf that doesn't help, you may make your cursor dynamic:
   OPEN c FOR 'SELECT fu.user_name core_id,
       fu.description user_name,
       fu.last_logon_date last_logon_date,
       TRUNC (SYSDATE) - TRUNC (fu.last_logon_date) days_since_last_logon,
       NVL ((SELECT ''YES''
               FROM custmot.moto_rma_approvers mra
              WHERE mra.primary_approver = fu.user_name), ''NO'')
                                                         primary_rma_approver,
       NVL ((SELECT ''YES''
               FROM custmot.moto_rma_approvers mra
              WHERE mra.secondary_approver = fu.user_name),
            ''YES'',
            ''ALL RESPONSIBILITIES'',
            DECODE (fu.employee_id,
                    NULL, ''USER ACCOUNT'',
                    ''ALL RESPONSIBILITIES''
           ) end_date_what
FROM apps.fnd_user fu';

How does one show full message headers in Mail 8.1? The previous 'complete header' option has been replaced with a time consuming 'custom' choice.

How does one show full message headers in Mail 8.1?
he previous 'complete header' option has been replaced with a time consuming 'custom' choice.

Customize your toolbar in Mail and add the All Headers button:

Error "Overlapping selection criteria with DTP" when transporting DTP

When transporting a DTP from Dev to QA I get the following error in the trasnport log:
Overlapping selection criteria with DTP DTP_4APJZSGKYQLUQYBCDBWK707JO
Message no. RSBK019
Diagnosis
The selection criteria for the DTP to be activated overlap with the selection criteria of DTP DTP_4APJZSGKYQLUQYBCDBWK707JO in field , for example, with regard to value . Delta transfer from a source object to a target object is only allowed to transfer each record oncce. However, this cannot be guaranteed if two DTPs have overlapping selection criteria with the 'Delta' extraction mode.
System Response
You cannot activate the DTP with the current selection criteria.
Procedure
Restrict the selection criteria so that they do not overlap with the selection criteria for DTP DTP_4APJZSGKYQLUQYBCDBWK707JO.
The DTP is a delta process which loads data from one infocube into an DSO. I understand that the error is that it is transporting the Delta parameters (something similar to a Delta initialization of infopackages I suppose) but I don´t how to access the information of the delta (selection criteria) of a DTP.
Any suggestions? or similar experiences?
Thanks in advance
nicolá

Hello,
You can modify a parameter to create and modify dtp in Production. Like normally is done with Infopackages. There is no reason to make the changes in Dev in the Infopackages and DTP, and transport to Production. This transports normally cause that kind of errors because the id's are different in Dev, QA and Prod, and it is difficult to change dtp in that way.
To change the parameter do like this:
Execute Trx. RSA1 -> Transport Connection -> Tab Object Changeability -> Change DTPA to Everything Changeable.
Do this in Dev, QA and Prod.
Regards,
Jorge Diogo

"Error occurred in the data selection" on init delta load ODS- InfoCube

Hi, gurus and experts!
I'm trying to do Init delta load from 0FIAR_O03 ODS into 0FIAR_C03 InfoCube in PRD env. by InfoPackage "Initialize with delta transfer (with data transfer)". Immediately after the load was started I got error
"Error occurred in the data selection"
with details
"Job terminated in source system --> Request set to red".
Where are no any short dumps. There are 1 activated init load in ODS - nearly 6 500 000 records.
Any ideas about error? And the way I can load data?

Hi Gediminas Berzanskis,
I faced the similar error when I tried to load data from an ODS which contained huge amount of data to a Cube. Even in your case the volume of data is more (around 6.5 million records). The error could be due to the table space issue, please contact your Basis team to check if enough table space exist for both the data targets.
Meanwhile you may also check the RFC connection of the Myself source system.
You can replicate the DSO datasource once and then reactivate the transfer rules using the program RS_TRANSTRU_ACTIVATE_ALL.
Try load with a small amount of data with a Full load option and then with a delta option..
Hope this Helps,
Prajeevan (XLNC)

How to see full size images when selecting multiple photos

In the Photos app, I click to view a photo and it shows up full screen like it used to. But now when I try to select multiple photos to upload to an email by hitting the send-to button at the lower left, suddenly all the photos are thumbnails at the top and a host of options fill the screen where the full-sized image used to be. Without full size previews I can't tell what photos in a series are really the better ones. Is there a way in iOS 8.1.1 to flip through your photos full screen and only select a few? It seems like this worked before but now this function has been removed? Thanks

Thanks for your answer. I think you are correct.
I did discover that when entering the first letter of a keyword in the box, a list comes up with suggestions. Frequently that list is only of the keywords that begin with the letter I entered. Once in a while I can get the entire list but I don't know how I do it. It seems intermittent but I suspect it is not. Any idea how that happens? Thanks again.

The mail window has overlapping buttons/headers

the mail window has overlapping buttons/headers and there is an email that wont let me delete

The double arrows do have a blue background. I have no doubt that I'm in Full Screen mode when they appear. However, when I click on the double arrows I can view the Mail screen perfectly. I assume clicking the double arrows exits Full Screen mode. I have also clicked Exit Full Screen from the menu. The issue is that my Mail app is very different from what it's typically like. It now hides the Mail menu bar until I move the pointer to above the screen. I cannot see any desk top from around the Mail screen and I cannot move the Mail screen at all. Also, the display of a new mail message; either one created or one opened looks like a something in the Preview app looks like. There is limited access to mail options and no option to Save as Draft. Also, there are no expand, minimize, close buttons (green, yellow, and red buttons) on any Mail screen.
By the way, these issues began after I used Mirror Screen with my Apple TV.
Thank you for your assistance.
Ed

Your Skype Profile Account has been awarded with t...

Today i have received a contact request named "Skype Admin" with the following message:
Congratulations!!! Your Skype Profile Account has been awarded with the sum of £250,000.00 Pounds. This is to inform you that you have won a prize money of Twe Hundred And Fifty Thousand Great Britain Pounds in the on going SKYPE SWEEP STAKES PROMO 2013 edition.
For claims and more information's contact us via:
Email: <removed for privacy>
Tel : <removed for privacy>
Once again Congratulations.
Best Regards,
Dr. Robert Walter
Cash Department
SKYPE.COM © 2013 Inc.
I am wondering how easily they are making fool. Even they dont have the skype email address.

i also get this in my e-mail
SKYPE FREE LOTTERY PROMOTION CLAIMS PROCESS MODE‏‏‏‏‏‏‏‏‏
Actions
skype teams (<removed for privacy>)
Add to contacts
4:17 PM
To: Joseph Bowen
SKYPE FREE LOTTERY PROMO
<removed for privacy>
Promo claims officer
Email: <removed for privacy>
Phone: <removed for privacy>
Dear Lucky Winner Congratulations!!!
PRIZE CONFIRMATION (CLAIMS PROCEDURE)
Skype is a well known and respected company here in UK/.
We selected your profile name as one of our lucky winners in our Skype free lottery program. This has been organized to encourage future users in your region against our up-coming improved Skype services coming soon. Your profile name was selected randomly by our sweepstakes Head office in UK. This has been done to promote Skype around the globe, please note that your account name has generated a ticket code number: SK83YPE for your interest. This automatically won you the sum of GBP1,000,000.00 (One Million Great British Pounds Sterling)
Below are your winning documents which will be presented to you.
1. WINNING CERTIFICATE FROM THE LOTTERY PROMOTIONS
2. WINNERS CERTIFIED CHECK OF GBP1,000,000.00 (One Million Great British Pounds Sterling / Cash as you may wish
3. CERTIFICATES OF ORIGIN OF FUNDS {C.O.F.}
Therefore, To facilitate the release of your Winnings, kindly reply via E-mail to this office with the following information below for verification and processing of your prize, so you can claim your Prize on time.
1. Your Full Names:..............................................
2. Contact Residential Address:.............................
3. Sex (Male/Female):.........................................
4. Age:................................................................
5. Occupation:.....................................................
6. Mobile Phone Number:......................................
7. Amount won:...................................................
Thank you for being part of this Skype Free Lottery award program and Congratulations once again from all members of staff of the Skype Team.
TERMS AND CONDITIONS:
1. Any falsification of your details will render you disqualified because you will be assumed to be impersonating.
2. As soon as your details are verified by this office, your Prize will be Officially Approved immediately without delay.
3. Friends or relatives cannot redeem your won prize on your behalf because the certified Check / Cash is covered by an Irrevocable Guarantee of Payment Bond (IGPB)
4. To avoid multiple claims, impersonation and disqualification, all winning information's should be kept strictly confidential.
Kindly reply back to this office through E-mail with your verification details as stated above for a quick processing of your Winnings immediately.
Congratulations Once again!!!
Sincerely,
Mr. Thomas Sultan (Claims Officer)
Skype Admin.

Lead selection with a tree-based table.

I've created a recursive context node to display contents of a KM folder. The structure has been mapped to a table, which works just fine. I can expand nodes of the tree and display the contents of sub-folders. Great. However, I need to know which backing KM object has been selected via the table. Since this is a recursive structure, using
wdContext.currentXXXX()
does not work, since that's the top of the tree. Parameter mapping will only give you the column and/or row of the item selected in the table, not the object itself.
I'm missing something obvious here, but I can't figure out how to get the context element behind the selected row in a table which is displaying a recursive structure.
I can do this with a Tree structure, since you can map the 'path' parameter to the actual context object. However, the Table UI doesn't offset that information (a severe oversight, at least in my mind).
Suggestions?

Thanks Armin, that works great.
Had I finished reading this page:
http://help.sap.com/saphelp_nw70/helpdata/en/60/1f1f056f057d4d962375efd3c92ed0/frameset.htm
I would have found the correct documentation.

How can i export the data to excel which has 2 tables with same number of columns & column names?

Hi everyone, again landed up with a problem.
After trying a lot to do it myself, finally decided to post here..
I have created a form in form builder 6i, in which on clicking a button the data gets exported to excel sheet.
It is working fine with a single table. The problem now is that i am unable to do the same with 2 tables.
Because both the tables have same number of columns & column names.
Below are 2 tables with column names:
Table-1 (MONTHLY_PART_1)
Table-2 (MONTHLY_PART_2)
SL_NO
SL_NO
COMP
COMP
DUE_DATE
DUE_DATE
U-1
U-1
U-2
U-2
U-4
U-4
U-20
U-20
U-25
U-25
Since both the tables have same column names, I'm getting the following error :
Error 402 at line 103, column 4
alias required in SELECT list of cursor to avoid duplicate column names.
So How can i export the data to excel which has 2 tables with same number of columns & column names?
Should i paste the code? Should i post this query in 'SQL and PL/SQL' Forum?
Help me with this please.
Thank You.

You'll have to *alias* your columns, not prefix it with the table names:
$[CHE_TEST@asterix1_impl] r
1 declare
2    cursor cData is
3      with data as (
4        select 1 id, 'test1' val1, 'a' val2 from dual
5        union all
6        select 1 id, '1test' val1, 'b' val2 from dual
7        union all
8        select 2 id, 'test2' val1, 'a' val2 from dual
9        union all
10        select 2 id, '2test' val1, 'b' val2 from dual
11      )
12      select a.id, b.id, a.val1, b.val1, a.val2, b.val2
13      from data a, data b
14      where a.id = b.id
15      and a.val2 = 'a'
16      and b.val2 = 'b';
17 begin
18    for rData in cData loop
19      null;
20    end loop;
21* end;
for rData in cData loop
ERROR at line 18:
ORA-06550: line 18, column 3:
PLS-00402: alias required in SELECT list of cursor to avoid duplicate column names
ORA-06550: line 18, column 3:
PL/SQL: Statement ignored
$[CHE_TEST@asterix1_impl] r
1 declare
2    cursor cData is
3      with data as (
4        select 1 id, 'test1' val1, 'a' val2 from dual
5        union all
6        select 1 id, '1test' val1, 'b' val2 from dual
7        union all
8        select 2 id, 'test2' val1, 'a' val2 from dual
9        union all
10        select 2 id, '2test' val1, 'b' val2 from dual
11      )
12      select a.id a_id, b.id b_id, a.val1 a_val1, b.val1 b_val1, a.val2 a_val2, b.val2 b_val2
13      from data a, data b
14      where a.id = b.id
15      and a.val2 = 'a'
16      and b.val2 = 'b';
17 begin
18    for rData in cData loop
19      null;
20    end loop;
21* end;
PL/SQL procedure successfully completed.
cheers

HT5318 Ever since I updated what looked like iTunes 10.6.1 my computer has been corrupted with Malware, which has filled up all available space on my hard drive. What do I do to get rid of the Malware?

Ever since I updated what looked like iTunes 10.6.1 my computer has been corrupted with Malware, which has filled up all available space on my hard drive. What do I do to get rid of the Malware?

First, reboot. That will temporarily free up some space. According to Apple documentation, you need at least 9 GB free for normal operation. You also need enough space left over to allow for growth of your data.
Use a tool such as OmniDiskSweeper to explore your volume and find out what's taking up the space.
Proceed further only if the problem hasn't been solved.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To really see everything, you have to run it as root.
First, back up all data if you haven't already done so. No matter what happens, you should be able to restore your system to the state it was in at the time of that backup.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
After installing ODS in the Applications folder, drag or copy — do not type — the following line into the Terminal window, then press return:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
I don't recommend that you make a habit of this. Don't delete anything while running ODS as root. When you're done with it, quit it and also quit Terminal.

Full 138257 has overlapping selections with init.138246:No updates into DSO

Similar Messages

Maybe you are looking for