Full Bars No connection

I have full bars in my house but no connection. I ran the diagnostic and got this error code
4sns/1/40000001:TB1T-12.602
Can somebody help me out

anyone?

Similar Messages

Full bars, 3g connected, but cant access internet

please help me, i'm using TELKOMSEL (indonesian) i have data plans, and it's 4gb, the thing is, as i said Full bars, 3g connected, but cant access internet, i tried to access google using safari, chrome, but still the same message, network not available, those things.... PLEASE HELP ME..

It sounds like a poor data connection. I get the same thing when I try to use AT&T here in my house. It shows 4G and 3 bars but I get little to no data at all. If that is what is happening to you, you can try another carrier if there is one.
Here, I can get LTE at my house and about 10-15Mbps on T-Mobile. Switching carriers can make the difference.

Airport Extreme, Full Bars No Connect?

Please forgive me if this has been answered, but I can't find it. I recently moved and changed service providers from Bellsouth DSL to Cable. I've tried reconfiguring my Base Station with no success. I have 2 lap tops and a Iphone ...They all show my network and full bars, but none will connect? I would like to have internet connected directly to my tower, then out of my tower to the base station. I'm pretty sure this worked for me prior to the move (Basically I don't want my tower to connect wirlessly). I'm not sure what I need to do. Please help.

First configure your network as I described in my last reply.
Then setup your AEBS as follows...
AirPort Extreme Base Station Setup (AEBS) w/High-Speed Cable Modem
Perform a "hard" reset of the AEBS
o (ref: http://docs.info.apple.com/article.html?artnum=107451)
Modem/Router Power ReCycling
o Power-off the Cable modem, AEBS, & computer(s); Wait for at least 30 minutes.
o Power-on the Cable modem; Wait at least 15 minutes.
o Power-on the AEBS; Wait at least 5 minutes.
o Power-on the computer(s)
Setup the AEBS
Either connect to the AEBS's wireless network or temporarily connect your computer directly (using an Ethernet cable) to the LAN port of the AEBS, and then, using the AirPort Admin Utility, try these settings:
AirPort tab
o Base Station Name: <whatever you wish or use the default>
o AirPort Network Name: <whatever you wish or use the default>
o Create a closed network (unchecked)
o Wireless Security: Not enabled
o Channel: Automatic
o Mode: 802.11b/g Compatible
Internet tab
o Connect Using: Ethernet
o Configure: Using DHCP
o WAN Ethernet Port: Automatic
Network tab
o Distribute IP addresses (checked)
o Share a single IP address (using DHCP & NAT) (enabled)
Once you verified that you can get Internet access for all of your computers, you should secure your wireless network. To do so, I suggest that you make these changes:
Change Wireless Security
o Wireless Security: WPA2 Personal
Base Station Options - WAN Ethernet Port
o Enable SNMP Access (unchecked)
o Enable Remote Configuration (unchecked)
o Enable Remote Printer Access (unchecked)

Shows full bars and connectvity in wifi but when hen saysim not connected

I turn on my wifi at a hotspot at d mall and it connects to a network and shows full bars and connectivity but whenev I try to open safari or my email it says im not connnected to d internet... ??? ummm no clue! a lil help plis!!

Some hotspots require additional authentication (you have to open Safari and click an Agree to Terms button, etc.). Others are 'open' networks, but require use proxy server which restricts access. If it works at home but not at the mall, the issue is with that network - you could try asking whoever's network it is.

My new IPad 3 cannot connect to WIFI even it has a full bar of the reception. In the same location, my PC and my smart phone get a full bar connection without any issues. How can I do to fix the issues (can I switch to IPad 2)?

My new Ipad 3 cannot connect to WIFI even it has a full bar of reception. In the same location, my Windows 7 PC and Andorid Smart phone can connect to the same WIFI without any issues. How can I fix it? Without WIFI, the WIFI only IPAD is nearly useless. If it cannot be fixed, can I get a replacement for IPad 2?

Take it to an Apple Store for evaluation. If defective, you'll get a replacement.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom

My macbook pro (lion 10.7.2) stopped connecting to wireless internet even though network indicates it is connected - full bars.

My macbook pro (10.7.2) just stopped connecting to the internet. 2 other macs in the house are working fine. All 3 are in the same room as the airport. The macbook network icon indicates it is connected with full bars. We have turned the computer off and on, but no effect. Any ideas?

Have you tried turning Airport off and then on again? My own q about this is somewhere in the answered q's--what worked was either the Airport on-off or something my phone company did while I was fiddling with Airport. Good luck!
Gail

My i pod touch has full bars on the airport yet it says im not connected ?

I am connected to the right network, i have full bars on my airport but it wont let me go on anything that requires internet ? it just keeps saying "Connection Error" and to check my internet connection ........ but i have full bars. ? -Thank you , Confused Chelsea

You didn't indicate if it ever worked. If it NEVER did, the problem could be caused by a firewall in the router. For reasons that I do not understand, that will affect IOS (iPod/iPad) communication but will not affect computers or other devices.
You will need administrative access to the router. If a firewall is present, turn it off and test the iPod again. If it works, turn the firewall back on but weaken it a notch and test the iPod again. Repeat as required.

My home wifi is available at full bars on the settings menu, but when selected it says it cannot be joined, and when it does connect, it only lasts a few seconds before disconnecting. My laptop connects to the wifi perfectly fine though. Help?

When in the Wi-Fi menu under settings, my iPod five will display the different wifi networks in range, including my home wifi network. The shown network has full bars and my laptop will connect to the network with no trouble. When the wifi on my ipod is selected though, it will show it is loading to connect, it will actually connect for five-ten or sometimes twenty seconds, and then it will disconnect. The wifi never automatically connects on my iPod5. It always has to be done manually and then does not establish a complete connection. No matter where I stand in the house, even if it is right beside the router, this happens. Sometimes when the network is chosen it refuses to connect and gives the message "Unable to Join". I've had it for a year and a half and for about the first six months it never had this problem. But then it began, and it would go through monthly cycles of working perfectly and doing what it is doing now. As of now I haven't been able to connect for three months. I'd like to think it's simply the wifi itself but mine and my sibling's laptops will connect with no trouble. It's extremely frustrating and I have no idea how to handle the problem. Please help?

Hey Saanasaana, Have you tried going into Settings>General>Reset and tapping Reset All Settings. If still no joy... Reset Network Settings and rebooting the router. If that doesn't do it, try Settings then tap the offending Wi-Fi Network, then tap Forget this Network and re-load it, as if it was a new network.
Your next options are to Restore. Connect to your iPod with your computer with the cable, and make new backups / copies of all your stuff to your computer first, then Restore from Backup. If that does not solve, Restore to New, a full restore. Note restore to new will wipe you iPod put it back to factory specs, that's why your need to make backups of everything on your iPod before you do it so you can reload your stuff back to your iPod. If the full restore does not solve you may have a hardware issue, contact your Apple store or Apple Genius Bar and set up an appointment to have your iPod evaluated. Good luck. Cheers.

Full bars, in and out connectivity, big problems...

Hi,
So I live in a New York City apartment where there is bound to be plenty of interference. The apartment is fairly big too so there is a decent amount of space to cover. I keep buying more things, assuming they will help, which to a certain degree they do, but nothing has ever been completly solved and I know there has got to be a solution.
Right now we have an airport extreme base station in the living room. My father's powermac g5 is hardwired via ethernet to this. We have a Dr. Bott Extendair Omni attached to the basestation. THEN, we have an airport express to relay the signal in my father's office and yet another airport express about 20 feet away, across the hall, in my room, to relay the signal once again.
For the first time I get consistant full bars in my room. When the door's open I can connect to the internet, but its fairly slow. I close my door and I get no connection, but I still have full bars. On the other side of the house my mom is connecting to the network via her powerbook g4. She also gets consistant full bars and decent speed connection.
All of this gear seems a bit excessive to begin with, but to not even have a perfect, fast running network with it all -in a space not that big - seems rediculous. We do have 2.4 ghz phones, but I did a test one day, unplugged them all, and saw no change. Just to be safe, I removed the 2.4 phones from my room and my father's office.
Finally, I'm not 100% sure that the airport expresses are doing their job relaying the signal. In the airport drop down menu I only see one "home" which is our network. But I installed MacStumbler to check things out in more detail and saw 2 "home" networks - each with a different MAC address. I'm not sure what that's about.
Sorry for the long post, but as you can see this is a fairly large, ongoing, issue that I would really love to resolve.
Powermac G5 Mac OS X (10.4.7) Airport Extreme Base Station and 2 Airport Express

...in the airport admin utility, under the Internet tab on both AX's it says connect using Airport (WDS), but on my base station it says connect using Ethernet. This is correct, correct?
Correct! That is correct!
Also, I just noticed on the AX's in the airport admin utility under the Airport tab, in the section that says Airport Network - the wireless mode is set to Create a Wireless Network (home router) and not join an existing wireless network (wireless client). Is this the correct setting?
I believe that is correct. WDS directions are in KB 107454, AirPort Extreme and Express: Using WDS to create a network from multiple base stations.
And lastly, I just tried to change the channel, but it comes up saying, "This base station is currently set up in WDS. Changing the channel will disconnect the WDS." Do I want to disconnect the WDS? Will this mess other things up?
It's a warning that you are going to need to change all of the base stations to the same channel for WDS to continue to work.

Airport network connected on full bars but "no internet connection" and missing lock icon!

this is really frustrating!
I'm using wireless in my house. when i click on my network it connects and it shows perfect connection which is full bars.
on Network Preferences it says that i'm connected to the Airport but when i go to Safari it shows "You are not connected to the Internet" so i click on Network Diagnostic where the 3 network status on top has the green indicator but the ISP, Internet and Server show red and failed.
I don't think there's anything wrong with my internet connection since I'm able to go online using my sister's computer and also on my iPhone.
There's also usually a Lock icon/symbol next to my network's name but when i'm connected to my network the Lock icon seems to be missing but it still shows full bars connection. I really don't get how it's possible to be connected to a network, but no internet connection, while i can access the internet on other devices.
Please help me out here. I've tried ways like going to library>preferences then put the system configuration into Trash, and going to Network Preferences and removing the Airport service and creating a new one.
and one more thing. all mentioned above are when i clicked on Advanced on network preferences then i clicked on TCP/IP and changed the Configure IPv4 from Using DHCP to Manually. When i'm back to using DHCP there's an exclamation point over the airport icon on the top bar and it says no internet connection.

Got my own question answered by a colleague.
He had me create another "Location" in the network pane of System Preferences, then choose it and click Apply. I created a new location which I called 'Airport', chose it and clicked Apply and sure enough, an IP address showed up and all is well.
Justin said it's a network bug in Leopard.

I have an old PowerPC and a Macbook Pro running 10.6.7 sitting side by side. Both are using AirPort to connect to the internet wirelessly to the same router, but the old Mac connects with full bars, but the MBP struggles with only 2. Pls help, thanks!

I have an old PowerPC running 10.4.11 and a Macbook Pro running 10.6.7 sitting side by side. Both are using AirPort to connect to the internet wirelessly to the same wireless router. The old Mac connects with full bars but the MBP struggles with only 2 bars. Pls help, thanks!

BDAqua,
Thanks for the response.
Apple has used the term "Digital Audio" to identify this machine. System Profiler has the following information:
Machine Name:          Power Mac G4
Machine Model:          PowerMac3,5
CPU Type:          PowerPC G4 (2.1)
Number Of CPUs:          1
CPU Speed:          800 MHz
L2 Cache (per CPU):          256 KB
Memory:          768 MB
Bus Speed:          133 MHz
Boot ROM Version:          4.3.3f2
Serial Number:          XBxxxxxMK9
Sales Order Number:
Yes, I could connect them by ethernet if all I wanted to do was transfer files, but I would like to network them so I could use wireless internet. The machines are not always so close together, I did that to simplify the testing. With the very slow transfer speeds I am reluctant to move ahead with the internet step.
<Edited By Host>

I have full bars but i can't connect to the internet. I've done all the usuall thing like reset the ipad reset my internet security but everytime it says "safari cannot open the page because it is not connected to the internet" Any ideas?y

I have full bars but i can't connect to the internet. I've done all the usuall thing like reset the ipad reset my internet security but everytime it says "safari cannot open the page because it is not connected to the internet" Any ideas?

As with previous posts this is usually a DHCP issue and occurs frequently especially with routers connected to Cable Modems or those Micro-Cell towers.
Unplug all Routers, AirPorts (or other off brand Wi-Fi broadcast units) and any other Wireless broadcast unit that might provide you with a WDS (often other AirPorts feeding off the signal of the AirPort closest to Cable/DSL Modem) and best to totally power down the Unit affected; lastly either hold a reset button on Cable/DSL modem for 30-45 seconds or actually power it down if an option (not suppose to power down Cable Modems that have Telephony for some odd never completely explained to me reason).
Let Cable/DSL Modem re-boot till 'all green lights'. Then power up each device involved in order from closest to farthest waiting each time for completion of initiation. Micro-cell towers can take 10 minutes to completely re-boot and you must wait for across the board green lights in my experience. Even WDS can add a few minutes till all green on mother AirPort unit.
Only NOW may you re-start the offending device and see if it will connect. Works about 99% of the time!

IPad 3 keeps saying it can't connect to cell network even though I've got full bars

My iPad 3 is on the O2 network in the UK. Pretty much every day on my commute or whenever I go onto 3G as opposed to wifi I will have full bars, an apparently strong connection, but the iPad will insist it can't connect to the Internet because there's no active cell connection. I have tried every trick in the book to get it to recognise the network that it can clearly see perfectly well, but the only thing that works is turning the device properly off and on again.
It actually happened while I was writing this message in fact: surfed to this page, wrote the post, pressed Submit and the iPad old me there was no Internet. Had to restart and repost.
Anyone else seeing this?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

Why does FaceTime keep saying "connection lost" when we both have full bars on our wifi?

Why does FaceTime keep saying "connection lost" when we both have full bars on our wifi? My friend in Texas has tried to call my via FaceTime but for some reason, every time she does, it keeps saying "connection lost" when we both have full bars on our wifi. Keep in mind, I am from Nebraska so we have the same time zone and I have an iPod 4 while she has a iPhone of some sort but that shouldn't matter because I am still able to FaceTime my friend in California, which is two hours behind me. So, I guess I just want to know why I cannot reach my friend in Texas. Please, someone help me!
-Mukestina

Apple has released a document which is reported to address the recent FaceTime issue.
http://support.apple.com/kb/TS5419

3G issues (full bars w/ 3G, but apps and safari won't connect)

I recently got the 3G iphone 16gb and right now it has this problem:
I would turn on 3G and get full bars and the 3G icon would appear, but when I try to open gmail and update, it would not connect and pop an error message "unable to retreive..." or take a really long time and not do anything at all. Same goes for Facebook app and Safari.
Upon the failure of the app the bars would drop to zero, the 3G icon would dissappear. I would press the home screen and exit, and while it idles in the main screen, bars would go back to full and 3G would appear again.
I would try to open Safari or apps again, and the process is repeated.
I called FIDO my provider, and they suggested a hard restart. It worked... for 5 minutes.
2nd time around I called and they suggested that since I was using a SIM card back from 2005, I needed the 3G enable SIM from the iPhone when it was delivered to me. Switched the line to the new SIM that came with it, and still no luck.
Hard resets, restarts, have no effect in solving the problem. And the funny story is, I was using the 8gb 3G before this 16gb with the old 2005 SIM and it worked perfectly.
Is it possible that something is wrong with the phone? I've made an appointment in the genius bar, but can anyone shed some light?
Message was edited by: noizz

I started having a similar problem 3 days ago. I'm with Rogers and new SIM card (never was on Rogers previously). I usually stay on 3G. I've done a restore (without backup) on iTunes, reset network settings, hard restore....no luck.
I can make & receive phone calls just fine. Safari is either slow or times out (server stopped responding) and same with e-mail.
I seem to do better with 3G disabled.
I have had my phone for more than 4 months without a problem...until Dec 2.
Personally, I'm beginning to think it's something with the Rogers/Fido network in certain cities, but no one at Rogers/Fido will admit to it.

Full Bars No connection

Similar Messages

Maybe you are looking for