Full Broadcast bars, yet unable to find signal

I was recently having problems with my cable modem as it kept dropping the connection. I received a new modem to replace the faulty modem and set up the AirPort, however, when I try to go online through the AirPort, it is unable to find the signal and times out. The meter is at full broadcast strength.
I am using a 600 MHz PowerPC G3 Graphite iMac and am running 10.2.8

The AirPort itself is white.

Similar Messages

  • My iPad Mini with retina display suddenly will not connect to the Internet. It shows full wifi bars, yet no web pages will load. My Internet is working with all other apple devices in my house. The iPad also no longer works with celluar data.

    My iPad Mini with retina display suddenly will not connect to the Internet. It shows full wifi bars, yet no web pages will load. My Internet is working with all other apple devices in my house. The iPad also no longer works with celluar data. I'm not sure what has happened. It was working fine a few hours ago. I have tried resetting it, ive restarted my browser etc. I tried to erase all data from my Ipad but I can't do that because it needs to sign into my Apple ID and use the Internet!

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I am having issues with my iphone6 bluetooth connection in my car.  When going to settings under bluetooth, it is unable to find any devices.  I did not have this issue until I downloaded IOS 8.0.2.  Do you know if there has been any resolution yet?

    I am having issues with my iphone6 Bluetooth connection in my 2013 Mercedes C Class.  When going to settings under Bluetooth, it is unable to find any devices.  I did not have this issue until I downloaded IOS 8.0.2.  Do you know if there has been any resolution from Apple yet?

    Hi susan from WSL, 
    Welcome to the Apple Support Communities!
    I understand that when your Bluetooth accessories, such as your car connection, do not work as expected it can be very frustrating. In this situation, I would recommend working through the troubleshooting steps provided in the attached article. 
    If you can’t use a Bluetooth accessory or car kit
    Cheers, 
    Joe

  • Unable to find Genius Bar confirmation

    Apologies if I'm posting this in the wrong place.
    I made an appointment with the Genius Bar last week for tomorrow (17/9/13) but I'm unable to find my email confirmation.
    Does anyone have an suggestions, or should I be ok without this?
    I booked with my apple id.
    Kind regards
    Sarah

    You do not need it.
    You can find the store you made the ap[pointment at here: http://www.apple.com/retail/
    Sign in with the Apple ID you made the appointment with and you should be able to view or edit your appointment details.
    You can also use the APple Store app on your iPhone:
    https://itunes.apple.com/us/app/apple-store/id375380948?mt=8

  • Unable to find navigation bar

    I'm following a textbook on dreamweaver cs4, but I currently have cs5. It tells me to go to the Common category, click the images list arrow and then click 'Navigation Bar.' I am unable to find the option 'Navigation Bar' in Dreamweaver CS5. Could someone please direct me to it?
    Thanks,
    Galagali

    I'm following a textbook on dreamweaver cs4, but I currently have cs5. It tells me to go to the Common category, click the images list arrow and then click 'Navigation Bar.' I am unable to find the option 'Navigation Bar' in Dreamweaver CS5. Could someone please direct me to it?
    The navigation bar feature has been deprecated as of Dreamweaver CS5:
    http://help.adobe.com/en_US/dreamweaver/cs/using/WScbb6b82af5544594822510a94ae8d65-7c18a.h tml
    HTH,
    Randy

  • Yet another "unable to find root device" problem (pacman issue) SOLVED

    During this night I've been trying to solve a problem that let me without access to my ArchLinux partition.
    Booting the kernel.
    :: Starting udevd...
    done.
    :: Running Hook [udev]
    :: Triggering uevents...done.
    Waiting 10 seconds for device /dev/by-uuid ...
    ERROR: Unable to find root device '/dev/by-uuid'.
    You are being dropped to a recovery shell
    Type 'exit' to try and continue booting
    sh: can't access tty: job control turned off
    [rootfs /]#
    The thing is that I've read about chrooting, I did chroot following the steps described on the Wiki https://wiki.archlinux.org/index.php/Change_Root but I have a problem with pacman and it's that I can't use pacman on chroot, it says: command not found. I must've done something wrong but I have no clue.
    My disk is sda1 and I don't use a special partition for /boot or /home.
    Thank you in advance.
    Last edited by ffuentes (2012-08-17 04:33:38)

    I've solved the mystery.
    Well, I realised that I had another serious issue with filesystem (that was mentioned on the Archlinux's news https://www.archlinux.org/news/filesyst … equired-1/ and https://www.archlinux.org/news/the-lib- … a-symlink/ ) so I had to figure out which packages were using /lib to remove them. Also I had to disable pacman's signature checking system because as I said before it didn't seem to work.
    After removing every package that happened to use /lib  at that time I eventually could perform the command "pacman -Syu" and later on "mkinitcpio -p linux" worked out.
    Thanks DSpider.

  • [Solved] Unable to find root device

    Hi guys,
    it's been three days now that my laptop refuses to boot with a message from systemd like this:
    ERROR: device 'UUID=xxx...' not found. Skipping fsck.
    ERROR: Unable to find root device 'UUID=xxx...'.
    You are being dropped to a recovery shell.
    That said, keep in mind that I'm saying "three days" just because it's in the past two days that I've spent most of the time searching in the Internet for a solution of what seems just to be a well-known, very common problem, especially when it arises after a kernel upgrade (as in my case).
    But believe me, I've been trying this and that through the live Arch Linux environment, but without the slightest improvement: regeneration of the initramfs, regeneration of /etc/fstab, reconfiguration of GRUB (although this was clearly unhelpful, since the problem arises when the kernel has already been booted), small changes in the hooks in /etc/mkinitcpio.conf, small changes to some modules loaded at boot, downgrading linux... Nothing works.
    I'm now writing from another computer, so I cannot post the entire output of useful commands now, but if you need to know something I will give you the necessary information.
    In the meanwhile, notice that I use Linux LVM partition with logical volumes formatted with Btrfs, without encryption.
    It's strange that even with the dowgrade from Linux 3.18.3 (the one after whose installation the system was unusable) to 3.18.2 the problem still remains.
    However, the only thing I managed to take from my system is the output of dmesg, obtained from the recovery shell, after having set the debug settings for systemd in the kernel command line before booting.
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.18.4-1-ARCH (builduser@tobias) (gcc version 4.9.2 20141224 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Jan 27 20:45:02 CET 2015
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=345f6168-2ff7-41fd-bf0e-050d4dd6795d systemd.log_level=debug systemd.log_target=kmsg log_buf_len=1M rw quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000913ff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000000091400-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c8c6cfff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c8c6d000-0x00000000dae8cfff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000dae8d000-0x00000000daeb6fff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000daeb7000-0x00000000db802fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000db803000-0x00000000dbafffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021edfffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.8 present.
    [ 0.000000] DMI: Dell Inc. Latitude E5550/0YM97J, BIOS A03 10/30/2014
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x21ee00 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0000000000 mask 7E00000000 write-back
    [ 0.000000] 1 base 0200000000 mask 7FE0000000 write-back
    [ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable
    [ 0.000000] 3 base 00DE000000 mask 7FFE000000 uncachable
    [ 0.000000] 4 base 00DD000000 mask 7FFF000000 uncachable
    [ 0.000000] 5 base 021F000000 mask 7FFF000000 uncachable
    [ 0.000000] 6 base 021EE00000 mask 7FFFE00000 uncachable
    [ 0.000000] 7 disabled
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0xc8c6d max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000fda70-0x000fda7f] mapped at [ffff8800000fda70]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff88000008b000] 8b000 size 24576
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
    [ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
    [ 0.000000] BRK [0x01b38000, 0x01b38fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x21ec00000-0x21edfffff]
    [ 0.000000] [mem 0x21ec00000-0x21edfffff] page 2M
    [ 0.000000] BRK [0x01b39000, 0x01b39fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21ebfffff]
    [ 0.000000] [mem 0x21c000000-0x21ebfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
    [ 0.000000] [mem 0x200000000-0x21bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0xc8c6cfff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
    [ 0.000000] [mem 0xc0000000-0xc8bfffff] page 2M
    [ 0.000000] [mem 0xc8c00000-0xc8c6cfff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
    [ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
    [ 0.000000] log_buf_len: 1048576 bytes
    [ 0.000000] early log buf free: 519600(99%)
    [ 0.000000] RAMDISK: [mem 0x3539c000-0x369c5fff]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x00000000000EF280 000024 (v02 DELL )
    [ 0.000000] ACPI: XSDT 0x00000000DAE960A8 0000CC (v01 DELL CBX3 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 0x00000000DAEA9C60 00010C (v05 DELL CBX3 01072009 AMI 00010013)
    [ 0.000000] ACPI: DSDT 0x00000000DAE96200 013A5B (v02 DELL CBX3 01072009 INTL 20120913)
    [ 0.000000] ACPI: FACS 0x00000000DB800F80 000040
    [ 0.000000] ACPI: APIC 0x00000000DAEA9D70 000084 (v03 DELL CBX3 01072009 AMI 00010013)
    [ 0.000000] ACPI: FPDT 0x00000000DAEA9DF8 000044 (v01 DELL CBX3 01072009 AMI 00010013)
    [ 0.000000] ACPI: FIDT 0x00000000DAEA9E40 00009C (v01 DELL CBX3 01072009 AMI 00010013)
    [ 0.000000] ACPI: MCFG 0x00000000DAEA9EE0 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
    [ 0.000000] ACPI: HPET 0x00000000DAEA9F20 000038 (v01 DELL CBX3 01072009 AMI. 00000005)
    [ 0.000000] ACPI: SSDT 0x00000000DAEA9F58 0004B5 (v01 SataRe SataTabl 00001000 INTL 20120913)
    [ 0.000000] ACPI: UEFI 0x00000000DAEAA410 000042 (v01 00000000 00000000)
    [ 0.000000] ACPI: SSDT 0x00000000DAEAA458 000C7D (v02 Ther_R Ther_Rvp 00001000 INTL 20120913)
    [ 0.000000] ACPI: ASF! 0x00000000DAEAB0D8 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
    [ 0.000000] ACPI: SSDT 0x00000000DAEAB178 00051F (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
    [ 0.000000] ACPI: SSDT 0x00000000DAEAB698 000B74 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
    [ 0.000000] ACPI: SSDT 0x00000000DAEAC210 0001C7 (v02 PmRef LakeTiny 00003000 INTL 20120913)
    [ 0.000000] ACPI: SSDT 0x00000000DAEAC3D8 0003A5 (v02 CppcTa CppcTabl 00001000 INTL 20120913)
    [ 0.000000] ACPI: PCCT 0x00000000DAEAC780 00006E (v05 PcctTa PcctTabl 00001000 INTL 20120913)
    [ 0.000000] ACPI: SSDT 0x00000000DAEAC7F0 000AC4 (v02 Cpc_Ta Cpc_Tabl 00001000 INTL 20120913)
    [ 0.000000] ACPI: SSDT 0x00000000DAEAD2B8 0041AC (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
    [ 0.000000] ACPI: SSDT 0x00000000DAEB1468 004508 (v01 DptfTa DptfTabl 00001000 INTL 20120913)
    [ 0.000000] ACPI: SLIC 0x00000000DAEB5970 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
    [ 0.000000] ACPI: MSDM 0x00000000DAEB5AE8 000055 (v03 DELL CBX3 06222004 AMI 00010013)
    [ 0.000000] ACPI: DMAR 0x00000000DAEB5B40 0000B0 (v01 INTEL BDW 00000001 INTL 00000001)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021edfffff]
    [ 0.000000] NODE_DATA(0) allocated [mem 0x21ecfa000-0x21ecfdfff]
    [ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880216800000-ffff88021e3fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x21edfffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x00090fff]
    [ 0.000000] node 0: [mem 0x00100000-0xc8c6cfff]
    [ 0.000000] node 0: [mem 0x100000000-0x21edfffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x21edfffff]
    [ 0.000000] On node 0 totalpages: 1997309
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3984 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 12786 pages used for memmap
    [ 0.000000] DMA32 zone: 818285 pages, LIFO batch:31
    [ 0.000000] Normal zone: 18360 pages used for memmap
    [ 0.000000] Normal zone: 1175040 pages, LIFO batch:31
    [ 0.000000] Reserving Intel graphics stolen memory at 0xdd200000-0xdf1fffff
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high dfl lint[0xe4])
    [ 0.000000] ACPI: NMI not connected to LINT 1!
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl edge lint[0x35])
    [ 0.000000] ACPI: NMI not connected to LINT 1!
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl edge lint[0x4b])
    [ 0.000000] ACPI: NMI not connected to LINT 1!
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x59])
    [ 0.000000] ACPI: NMI not connected to LINT 1!
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
    [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x00091000-0x00091fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x00092000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc8c6d000-0xdae8cfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdae8d000-0xdaeb6fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdaeb7000-0xdb802fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdb803000-0xdbafffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdbb00000-0xdcffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdd000000-0xdf1fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
    [ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88021ea00000 s82880 r8192 d31808 u524288
    [ 0.000000] pcpu-alloc: s82880 r8192 d31808 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1966078
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=345f6168-2ff7-41fd-bf0e-050d4dd6795d systemd.log_level=debug systemd.log_target=kmsg log_buf_len=1M rw quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
    [ 0.000000] AGP: Checking aperture...
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 7760140K/7989236K available (5479K kernel code, 908K rwdata, 1720K rodata, 1160K init, 1184K bss, 229096K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
    [ 0.000000] NR_IRQS:8448 nr_irqs:728 0
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 32505856 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 2593.984 MHz processor
    [ 0.000025] Calibrating delay loop (skipped), value calculated using timer frequency.. 5190.13 BogoMIPS (lpj=8646613)
    [ 0.000028] pid_max: default: 32768 minimum: 301
    [ 0.000032] ACPI: Core revision 20140926
    [ 0.020437] ACPI: All ACPI Tables successfully acquired
    [ 0.021107] Security Framework initialized
    [ 0.021114] Yama: becoming mindful.
    [ 0.021531] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.023288] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.024091] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.024099] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.024297] Initializing cgroup subsys memory
    [ 0.024302] Initializing cgroup subsys devices
    [ 0.024304] Initializing cgroup subsys freezer
    [ 0.024305] Initializing cgroup subsys net_cls
    [ 0.024307] Initializing cgroup subsys blkio
    [ 0.024325] CPU: Physical Processor ID: 0
    [ 0.024326] CPU: Processor Core ID: 0
    [ 0.024329] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    [ 0.024329] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.025227] mce: CPU supports 7 MCE banks
    [ 0.025238] CPU0: Thermal monitoring enabled (TM1)
    [ 0.025247] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
    [ 0.025247] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
    [ 0.025334] Freeing SMP alternatives memory: 20K (ffffffff81a07000 - ffffffff81a0c000)
    [ 0.026009] ftrace: allocating 20921 entries in 82 pages
    [ 0.033432] dmar: Host address width 39
    [ 0.033434] dmar: DRHD base: 0x000000fed90000 flags: 0x0
    [ 0.033442] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
    [ 0.033443] dmar: DRHD base: 0x000000fed91000 flags: 0x1
    [ 0.033447] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
    [ 0.033448] dmar: RMRR base: 0x000000db9ee000 end: 0x000000db9fcfff
    [ 0.033449] dmar: RMRR base: 0x000000dd000000 end: 0x000000df1fffff
    [ 0.033571] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
    [ 0.033572] HPET id 0 under DRHD base 0xfed91000
    [ 0.033573] Queued invalidation will be enabled to support x2apic and Intr-remapping.
    [ 0.033573] Your BIOS is broken and requested that x2apic be disabled.
    [ 0.033573] This will slightly decrease performance.
    [ 0.033573] Use 'intremap=no_x2apic_optout' to override BIOS request.
    [ 0.033713] Enabled IRQ remapping in xapic mode
    [ 0.033713] x2apic not enabled, IRQ remapping is in xapic mode
    [ 0.034335] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.067359] smpboot: CPU0: Intel(R) Core(TM) i5-4310U CPU @ 2.00GHz (fam: 06, model: 45, stepping: 01)
    [ 0.067366] TSC deadline timer enabled
    [ 0.067387] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
    [ 0.067404] ... version: 3
    [ 0.067405] ... bit width: 48
    [ 0.067406] ... generic registers: 4
    [ 0.067407] ... value mask: 0000ffffffffffff
    [ 0.067407] ... max period: 0000ffffffffffff
    [ 0.067408] ... fixed-purpose events: 3
    [ 0.067409] ... event mask: 000000070000000f
    [ 0.090846] x86: Booting SMP configuration:
    [ 0.090848] .... node #0, CPUs: #1
    [ 0.105028] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.111723] #2 #3
    [ 0.146545] x86: Booted up 1 node, 4 CPUs
    [ 0.146548] smpboot: Total of 4 processors activated (20760.53 BogoMIPS)
    [ 0.149839] devtmpfs: initialized
    [ 0.151742] PM: Registering ACPI NVS region [mem 0xdaeb7000-0xdb802fff] (9748480 bytes)
    [ 0.152488] pinctrl core: initialized pinctrl subsystem
    [ 0.152525] RTC time: 14:27:35, date: 01/29/15
    [ 0.152613] NET: Registered protocol family 16
    [ 0.163220] cpuidle: using governor ladder
    [ 0.176565] cpuidle: using governor menu
    [ 0.176604] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.176606] ACPI: bus type PCI registered
    [ 0.176607] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.176682] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.176684] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.176776] PCI: Using configuration type 1 for base access
    [ 0.176783] dmi type 0xB1 record - unknown flag
    [ 0.190254] ACPI: Added _OSI(Module Device)
    [ 0.190257] ACPI: Added _OSI(Processor Device)
    [ 0.190258] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.190259] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.195406] ACPI: Executed 16 blocks of module-level executable AML code
    [ 0.527048] ACPI: Dynamic OEM Table Load:
    [ 0.527056] ACPI: SSDT 0xFFFF88021322C800 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
    [ 0.540534] ACPI: Dynamic OEM Table Load:
    [ 0.540541] ACPI: SSDT 0xFFFF8802131E2000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
    [ 0.553725] ACPI: Dynamic OEM Table Load:
    [ 0.553731] ACPI: SSDT 0xFFFF8802131DD200 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
    [ 0.607146] ACPI: Interpreter enabled
    [ 0.607157] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
    [ 0.607166] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
    [ 0.607184] ACPI: (supports S0 S3 S4 S5)
    [ 0.607185] ACPI: Using IOAPIC for interrupt routing
    [ 0.607218] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.608649] ACPI: Power Resource [PG00] (on)
    [ 0.620317] ACPI: Power Resource [PG01] (on)
    [ 0.640702] ACPI: Power Resource [PG02] (on)
    [ 1.401836] ACPI: Power Resource [FN00] (off)
    [ 1.401913] ACPI: Power Resource [FN01] (off)
    [ 1.401986] ACPI: Power Resource [FN02] (off)
    [ 1.402057] ACPI: Power Resource [FN03] (off)
    [ 1.402127] ACPI: Power Resource [FN04] (off)
    [ 1.403037] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 1.403043] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 1.403622] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
    [ 1.404193] PCI host bridge to bus 0000:00
    [ 1.404195] pci_bus 0000:00: root bus resource [bus 00-3e]
    [ 1.404196] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 1.404198] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 1.404199] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 1.404200] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff]
    [ 1.404207] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
    [ 1.404286] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
    [ 1.404296] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
    [ 1.404301] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 1.404305] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
    [ 1.404376] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
    [ 1.404383] pci 0000:00:03.0: reg 0x10: [mem 0xf7e3c000-0xf7e3ffff 64bit]
    [ 1.404461] pci 0000:00:04.0: [8086:0a03] type 00 class 0x118000
    [ 1.404471] pci 0000:00:04.0: reg 0x10: [mem 0xf7e30000-0xf7e37fff 64bit]
    [ 1.404565] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
    [ 1.404580] pci 0000:00:14.0: reg 0x10: [mem 0xf7e20000-0xf7e2ffff 64bit]
    [ 1.404631] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 1.404674] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 1.404707] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
    [ 1.404725] pci 0000:00:16.0: reg 0x10: [mem 0xf7e46000-0xf7e4601f 64bit]
    [ 1.404787] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 1.404856] pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000
    [ 1.404870] pci 0000:00:19.0: reg 0x10: [mem 0xf7e00000-0xf7e1ffff]
    [ 1.404876] pci 0000:00:19.0: reg 0x14: [mem 0xf7e43000-0xf7e43fff]
    [ 1.404882] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
    [ 1.404937] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
    [ 1.445821] pci 0000:00:19.0: System wakeup disabled by ACPI
    [ 1.445873] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
    [ 1.445892] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e38000-0xf7e3bfff 64bit]
    [ 1.445956] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 1.446016] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 1.446062] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
    [ 1.446146] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 1.446197] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 1.446246] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
    [ 1.446328] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 1.446379] pci 0000:00:1c.3: System wakeup disabled by ACPI
    [ 1.446423] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
    [ 1.446505] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 1.446555] pci 0000:00:1c.4: System wakeup disabled by ACPI
    [ 1.446601] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
    [ 1.446621] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e42000-0xf7e423ff]
    [ 1.446711] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 1.446770] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 1.446812] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
    [ 1.446999] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
    [ 1.447014] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
    [ 1.447021] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
    [ 1.447027] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
    [ 1.447034] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
    [ 1.447041] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
    [ 1.447048] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e41000-0xf7e417ff]
    [ 1.447087] pci 0000:00:1f.2: PME# supported from D3hot
    [ 1.447164] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
    [ 1.447177] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e40000-0xf7e400ff 64bit]
    [ 1.447196] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
    [ 1.449196] pci 0000:01:00.0: [1217:8520] type 00 class 0x080501
    [ 1.449218] pci 0000:01:00.0: reg 0x10: [mem 0xf7d01000-0xf7d01fff]
    [ 1.449231] pci 0000:01:00.0: reg 0x14: [mem 0xf7d00000-0xf7d007ff]
    [ 1.449369] pci 0000:01:00.0: PME# supported from D3hot D3cold
    [ 1.449400] pci 0000:01:00.0: System wakeup disabled by ACPI
    [ 1.457648] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 1.457653] pci 0000:00:1c.0: bridge window [mem 0xf7d00000-0xf7dfffff]
    [ 1.458041] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000
    [ 1.458129] pci 0000:02:00.0: reg 0x10: [mem 0xf7c00000-0xf7c01fff 64bit]
    [ 1.458420] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 1.458511] pci 0000:02:00.0: System wakeup disabled by ACPI
    [ 1.462692] pci 0000:00:1c.3: PCI bridge to [bus 02]
    [ 1.462697] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff]
    [ 1.462787] pci 0000:00:1c.4: PCI bridge to [bus 03]
    [ 1.464747] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
    [ 1.547152] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 1.547202] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 1.547250] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 1.547296] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 1.547342] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
    [ 1.547388] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 10 11 12 14 15)
    [ 1.547434] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
    [ 1.547480] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 1.613841] ACPI: Enabled 3 GPEs in block 00 to 7F
    [ 1.613905] ACPI : EC: GPE = 0x27, I/O: command/status = 0x934, data = 0x930
    [ 1.614013] vgaarb: setting as boot device: PCI:0000:00:02.0
    [ 1.614016] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 1.614019] vgaarb: loaded
    [ 1.614020] vgaarb: bridge control possible 0000:00:02.0
    [ 1.614099] PCI: Using ACPI for IRQ routing
    [ 1.615308] PCI: pci_cache_line_size set to 64 bytes
    [ 1.615344] e820: reserve RAM buffer [mem 0x00091400-0x0009ffff]
    [ 1.615345] e820: reserve RAM buffer [mem 0xc8c6d000-0xcbffffff]
    [ 1.615346] e820: reserve RAM buffer [mem 0x21ee00000-0x21fffffff]
    [ 1.615428] NetLabel: Initializing
    [ 1.615429] NetLabel: domain hash size = 128
    [ 1.615429] NetLabel: protocols = UNLABELED CIPSOv4
    [ 1.615438] NetLabel: unlabeled traffic allowed by default
    [ 1.615467] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 1.615471] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 1.617497] Switched to clocksource hpet
    [ 1.621576] pnp: PnP ACPI init
    [ 1.621752] system 00:00: [io 0x0680-0x069f] has been reserved
    [ 1.621755] system 00:00: [io 0xffff] has been reserved
    [ 1.621756] system 00:00: [io 0xffff] has been reserved
    [ 1.621758] system 00:00: [io 0xffff] has been reserved
    [ 1.621759] system 00:00: [io 0x1800-0x18fe] could not be reserved
    [ 1.621761] system 00:00: [io 0x164e-0x164f] has been reserved
    [ 1.621763] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.621806] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 1.621837] system 00:02: [io 0x1854-0x1857] has been reserved
    [ 1.621839] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 1.621908] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 1.621927] pnp 00:04: Plug and Play ACPI device, IDs DLL062c PNP0f13 (active)
    [ 1.774372] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (disabled)
    [ 1.774526] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 1.774529] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 1.774530] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 1.774532] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 1.774534] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 1.774536] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 1.774538] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
    [ 1.774539] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 1.774541] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
    [ 1.774543] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 1.774545] system 00:06: [mem 0xf7fe0000-0xf7feffff] has been reserved
    [ 1.774547] system 00:06: [mem 0xf7ff0000-0xf7ffffff] has been reserved
    [ 1.774549] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.774927] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 2.001167] pnp: PnP ACPI: found 8 devices
    [ 2.007535] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 2.007540] pci 0000:00:1c.0: bridge window [mem 0xf7d00000-0xf7dfffff]
    [ 2.007546] pci 0000:00:1c.3: PCI bridge to [bus 02]
    [ 2.007549] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff]
    [ 2.007555] pci 0000:00:1c.4: PCI bridge to [bus 03]
    [ 2.007564] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 2.007566] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 2.007567] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 2.007568] pci_bus 0000:00: resource 7 [mem 0xdf200000-0xfeafffff]
    [ 2.007570] pci_bus 0000:01: resource 1 [mem 0xf7d00000-0xf7dfffff]
    [ 2.007571] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
    [ 2.007594] NET: Registered protocol family 2
    [ 2.007754] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [ 2.007894] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 2.008082] TCP: Hash tables configured (established 65536 bind 65536)
    [ 2.008100] TCP: reno registered
    [ 2.008108] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 2.008140] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 2.008195] NET: Registered protocol family 1
    [ 2.008208] pci 0000:00:02.0: Video device with shadowed ROM
    [ 2.024532] PCI: CLS 64 bytes, default 64
    [ 2.024577] Unpacking initramfs...
    [ 2.341540] Freeing initrd memory: 22696K (ffff88003539c000 - ffff8800369c6000)
    [ 2.341564] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 2.341567] software IO TLB [mem 0xc4c6d000-0xc8c6d000] (64MB) mapped at [ffff8800c4c6d000-ffff8800c8c6cfff]
    [ 2.341712] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
    [ 2.341757] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1c
    [ 2.341762] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1c
    [ 2.341766] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1c
    [ 2.341771] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1c
    [ 2.341822] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 2.341843] Scanning for low memory corruption every 60 seconds
    [ 2.342043] futex hash table entries: 1024 (order: 4, 65536 bytes)
    [ 2.342061] Initialise system trusted keyring
    [ 2.342314] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 2.343277] zpool: loaded
    [ 2.343280] zbud: loaded
    [ 2.343434] VFS: Disk quotas dquot_6.5.2
    [ 2.343457] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 2.343557] msgmni has been set to 15200
    [ 2.343599] Key type big_key registered
    [ 2.343749] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 2.343779] io scheduler noop registered
    [ 2.343781] io scheduler deadline registered
    [ 2.343802] io scheduler cfq registered (default)
    [ 2.343967] pcieport 0000:00:1c.0: irq 42 for MSI/MSI-X
    [ 2.344096] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
    [ 2.344214] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
    [ 2.344282] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
    [ 2.344283] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
    [ 2.344286] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
    [ 2.344296] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
    [ 2.344297] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
    [ 2.344300] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
    [ 2.344310] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
    [ 2.344312] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
    [ 2.344325] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 2.344337] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 2.344362] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
    [ 2.344363] vesafb: scrolling: redraw
    [ 2.344364] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 2.344382] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004f80000, using 8128k, total 8128k
    [ 2.492136] Console: switching to colour frame buffer device 240x67
    [ 2.639261] fb0: VESA VGA frame buffer device
    [ 2.639278] intel_idle: MWAIT substates: 0x11142120
    [ 2.639279] intel_idle: v0.4 model 0x45
    [ 2.639280] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 2.639471] GHES: HEST is not enabled!
    [ 2.639520] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 2.639854] Linux agpgart interface v0.103
    [ 2.639890] rtc_cmos 00:01: RTC can wake from S4
    [ 2.640003] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
    [ 2.640027] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 2.640037] Intel P-state driver initializing.
    [ 2.640149] ledtrig-cpu: registered to indicate activity on CPUs
    [ 2.640415] TCP: cubic registered
    [ 2.640635] NET: Registered protocol family 10
    [ 2.641104] NET: Registered protocol family 17
    [ 2.641809] Loading compiled-in X.509 certificates
    [ 2.641841] registered taskstats version 1
    [ 2.642839] Magic number: 15:558:486
    [ 2.642991] rtc_cmos 00:01: setting system clock to 2015-01-29 14:27:38 UTC (1422541658)
    [ 2.643157] PM: Hibernation image not present or could not be loaded.
    [ 2.645133] Freeing unused kernel memory: 1160K (ffffffff818e5000 - ffffffff81a07000)
    [ 2.645137] Write protecting the kernel read-only data: 8192k
    [ 2.649298] Freeing unused kernel memory: 652K (ffff88000155d000 - ffff880001600000)
    [ 2.651088] Freeing unused kernel memory: 328K (ffff8800017ae000 - ffff880001800000)
    [ 2.656604] random: systemd-tmpfile urandom read with 6 bits of entropy available
    [ 2.656683] systemd-tmpfiles[60]: /dev/mapper created successfully.
    [ 2.656691] systemd-tmpfiles[60]: /dev/fuse created successfully.
    [ 2.656696] systemd-tmpfiles[60]: /dev/mapper/control created successfully.
    [ 2.656700] systemd-tmpfiles[60]: /dev/loop-control created successfully.
    [ 2.656704] systemd-tmpfiles[60]: /dev/cuse created successfully.
    [ 2.656707] systemd-tmpfiles[60]: /dev/btrfs-control created successfully.
    [ 2.657455] systemd-udevd[61]: starting version 218
    [ 2.657462] systemd-udevd[61]: hwdb.bin does not exist, please run udevadm hwdb --update
    [ 2.657510] systemd-udevd[61]: Load module index
    [ 2.657562] systemd-udevd[61]: Created link configuration context.
    [ 2.657568] systemd-udevd[61]: timestamp of '/usr/lib/udev/rules.d' changed
    [ 2.657608] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/10-dm.rules
    [ 2.657685] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/11-dm-initramfs.rules
    [ 2.657695] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/11-dm-lvm.rules
    [ 2.657733] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/13-dm-disk.rules
    [ 2.657763] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/50-udev-default.rules
    [ 2.657871] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/60-persistent-storage.rules
    [ 2.657981] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/64-btrfs.rules
    [ 2.657999] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/69-dm-lvm-metad.rules
    [ 2.658057] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/80-drivers.rules
    [ 2.658080] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/95-dm-notify.rules
    [ 2.658089] systemd-udevd[61]: rules contain 24576 bytes tokens (2048 * 12 bytes), 4834 bytes strings
    [ 2.658091] systemd-udevd[61]: 641 strings (8077 bytes), 378 de-duplicated (3507 bytes), 264 trie nodes used
    [ 2.658106] systemd-udevd[61]: chmod '/dev/fuse' 0666
    [ 2.658188] systemd-udevd[61]: Unload module index
    [ 2.658212] systemd-udevd[61]: Unloaded link configuration context.
    [ 2.658262] systemd-udevd[62]: set children_max to 16
    [ 2.660408] systemd-udevd[62]: seq 678 queued, 'add' 'module'
    [ 2.660490] systemd-udevd[62]: seq 678 forked new worker [67]
    [ 2.660575] systemd-udevd[67]: seq 678 running
    [ 2.660618] systemd-udevd[67]: no db file to read /run/udev/data/+module:raid6_pq: No such file or directory
    [ 2.660644] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 2.660651] systemd-udevd[67]: seq 678 processed with 0
    [ 2.714860] raid6: sse2x1 9342 MB/s
    [ 2.771561] raid6: sse2x2 11848 MB/s
    [ 2.828260] raid6: sse2x4 13887 MB/s
    [ 2.884943] raid6: avx2x1 18356 MB/s
    [ 2.941655] raid6: avx2x2 21230 MB/s
    [ 2.998344] raid6: avx2x4 24583 MB/s
    [ 2.998345] raid6: using algorithm avx2x4 (24583 MB/s)
    [ 2.998346] raid6: using avx2x2 recovery algorithm
    [ 2.998547] xor: automatically using best checksumming function:
    [ 2.998570] systemd-udevd[62]: seq 679 queued, 'add' 'module'
    [ 2.998603] systemd-udevd[62]: passed 124 bytes to netlink monitor 0x7f4fb497f0d0
    [ 2.998639] systemd-udevd[67]: seq 679 running
    [ 2.998659] systemd-udevd[67]: no db file to read /run/udev/data/+module:xor: No such file or directory
    [ 2.998678] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 2.998684] systemd-udevd[67]: seq 679 processed with 0
    [ 3.031698] avx : 25444.800 MB/sec
    [ 3.034144] systemd-udevd[62]: Validate module index
    [ 3.034177] systemd-udevd[62]: Check if link configuration needs reloading.
    [ 3.034204] systemd-udevd[62]: seq 680 queued, 'add' 'module'
    [ 3.034228] systemd-udevd[62]: passed 126 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.034249] systemd-udevd[67]: seq 680 running
    [ 3.034275] systemd-udevd[67]: no db file to read /run/udev/data/+module:btrfs: No such file or directory
    [ 3.034299] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.034308] systemd-udevd[67]: seq 680 processed with 0
    [ 3.034899] systemd-udevd[62]: seq 681 queued, 'add' 'module'
    [ 3.034927] systemd-udevd[62]: passed 133 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.034945] systemd-udevd[67]: seq 681 running
    [ 3.034964] systemd-udevd[67]: no db file to read /run/udev/data/+module:crc32c_intel: No such file or directory
    [ 3.034979] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.034986] systemd-udevd[67]: seq 681 processed with 0
    [ 3.035051] systemd-udevd[62]: seq 682 queued, 'add' 'module'
    [ 3.035070] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.035087] systemd-udevd[67]: seq 682 running
    [ 3.035101] systemd-udevd[67]: no db file to read /run/udev/data/+module:crc32c_generic: No such file or directory
    [ 3.035113] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.035118] systemd-udevd[67]: seq 682 processed with 0
    [ 3.035756] systemd-udevd[62]: seq 683 queued, 'add' 'slab'
    [ 3.035776] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.035790] systemd-udevd[67]: seq 683 running
    [ 3.035795] systemd-udevd[62]: seq 684 queued, 'add' 'slab'
    [ 3.035810] systemd-udevd[67]: no db file to read /run/udev/data/+slab:btrfs_inode: No such file or directory
    [ 3.035830] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.035834] systemd-udevd[67]: seq 683 processed with 0
    [ 3.035903] systemd-udevd[62]: seq 684 forked new worker [75]
    [ 3.035934] systemd-udevd[62]: seq 685 queued, 'add' 'slab'
    [ 3.035948] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.035961] systemd-udevd[67]: seq 685 running
    [ 3.035968] systemd-udevd[62]: seq 686 queued, 'add' 'slab'
    [ 3.035981] systemd-udevd[67]: no db file to read /run/udev/data/+slab::at-0000144: No such file or directory
    [ 3.035981] systemd-udevd[75]: seq 684 running
    [ 3.035999] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.036004] systemd-udevd[67]: seq 685 processed with 0
    [ 3.036010] systemd-udevd[75]: no db file to read /run/udev/data/+slab::at-0000176: No such file or directory
    [ 3.036027] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
    [ 3.036031] systemd-udevd[75]: seq 684 processed with 0
    [ 3.036065] systemd-udevd[62]: seq 686 forked new worker [76]
    [ 3.036107] systemd-udevd[62]: seq 687 queued, 'add' 'slab'
    [ 3.036128] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.036146] systemd-udevd[62]: seq 688 queued, 'add' 'slab'
    [ 3.036165] systemd-udevd[76]: seq 686 running
    [ 3.036166] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.036180] systemd-udevd[75]: seq 688 running
    [ 3.036182] systemd-udevd[62]: seq 689 queued, 'add' 'slab'
    [ 3.036199] systemd-udevd[75]: no db file to read /run/udev/data/+slab::at-0000088: No such file or directory
    [ 3.036206] systemd-udevd[76]: no db file to read /run/udev/data/+slab::at-0000064: No such file or directory
    [ 3.036212] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
    [ 3.036215] systemd-udevd[75]: seq 688 processed with 0
    [ 3.036227] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
    [ 3.036231] systemd-udevd[76]: seq 686 processed with 0
    [ 3.036257] Btrfs loaded
    [ 3.036289] systemd-udevd[62]: seq 689 forked new worker [77]
    [ 3.036329] systemd-udevd[62]: seq 690 queued, 'add' 'slab'
    [ 3.036351] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.036370] systemd-udevd[62]: seq 691 queued, 'add' 'slab'
    [ 3.036378] systemd-udevd[77]: seq 689 running
    [ 3.036390] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.036407] systemd-udevd[62]: seq 692 queued, 'add' 'slab'
    [ 3.036413] systemd-udevd[77]: no db file to read /run/udev/data/+slab::at-0000280: No such file or directory
    [ 3.036434] systemd-udevd[77]: passed -1 bytes to netlink monitor 0x7f4fb498a250
    [ 3.036439] systemd-udevd[77]: seq 689 processed with 0
    [ 3.036457] systemd-udevd[76]: seq 691 running
    [ 3.036474] systemd-udevd[76]: no db file to read /run/udev/data/+slab::at-0000304: No such file or directory
    [ 3.036493] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
    [ 3.036498] systemd-udevd[76]: seq 691 processed with 0
    [ 3.036513] systemd-udevd[62]: seq 692 forked new worker [78]
    [ 3.036548] systemd-udevd[62]: seq 693 queued, 'add' 'slab'
    [ 3.036563] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.036576] systemd-udevd[76]: seq 693 running
    [ 3.036579] systemd-udevd[62]: seq 694 queued, 'add' 'slab'
    [ 3.036596] systemd-udevd[76]: no db file to read /run/udev/data/+slab::at-0000096: No such file or directory
    [ 3.036597] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.036615] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
    [ 3.036616] systemd-udevd[62]: seq 695 queued, 'add' 'slab'
    [ 3.036619] systemd-udevd[76]: seq 693 processed with 0
    [ 3.036637] systemd-udevd[77]: seq 694 running
    [ 3.036649] systemd-udevd[78]: seq 692 running
    [ 3.036655] systemd-udevd[77]: no db file to read /run/udev/data/+slab::at-0000040: No such file or directory
    [ 3.036672] systemd-udevd[77]: passed -1 bytes to netlink monitor 0x7f4fb498a250
    [ 3.036676] systemd-udevd[77]: seq 694 processed with 0
    [ 3.036678] systemd-udevd[78]: no db file to read /run/udev/data/+slab::at-0000160: No such file or directory
    [ 3.036694] systemd-udevd[78]: passed -1 bytes to netlink monitor 0x7f4fb498f600
    [ 3.036698] systemd-udevd[78]: seq 692 processed with 0
    [ 3.036721] systemd-udevd[62]: seq 695 forked new worker [80]
    [ 3.036773] systemd-udevd[62]: seq 696 queued, 'add' 'misc'
    [ 3.036801] systemd-udevd[80]: seq 695 running
    [ 3.036826] systemd-udevd[80]: no db file to read /run/udev/data/+slab::at-0000080: No such file or directory
    [ 3.036832] systemd-udevd[62]: passed 192 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.036843] systemd-udevd[80]: passed -1 bytes to netlink monitor 0x7f4fb49913d0
    [ 3.036848] systemd-udevd[80]: seq 695 processed with 0
    [ 3.036859] systemd-udevd[76]: seq 696 running
    [ 3.036904] systemd-udevd[76]: no db file to read /run/udev/data/c10:234: No such file or directory
    [ 3.036916] systemd-udevd[76]: handling device node '/dev/btrfs-control', devnum=c10:234, mode=0600, uid=0, gid=0
    [ 3.036922] systemd-udevd[76]: preserve permissions /dev/btrfs-control, 020600, uid=0, gid=0
    [ 3.036930] systemd-udevd[76]: creating symlink '/dev/char/10:234' to '../btrfs-control'
    [ 3.036959] systemd-udevd[76]: created empty file '/run/udev/data/c10:234' for '/devices/virtual/misc/btrfs-control'
    [ 3.036987] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
    [ 3.036992] systemd-udevd[76]: seq 696 processed with 0
    [ 3.037009] systemd-udevd[67]: seq 687 running
    [ 3.037027] systemd-udevd[67]: no db file to read /run/udev/data/+slab::at-0000152: No such file or directory
    [ 3.037044] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.037048] systemd-udevd[67]: seq 687 processed with 0
    [ 3.037063] systemd-udevd[75]: seq 690 running
    [ 3.037079] systemd-udevd[75]: no db file to read /run/udev/data/+slab::at-0000424: No such file or directory
    [ 3.037093] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
    [ 3.037097] systemd-udevd[75]: seq 690 processed with 0
    [ 3.037372] udevadm[79]: calling: trigger
    [ 3.037397] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/vt'
    [ 3.037403] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/xor'
    [ 3.037408] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/8250'
    [ 3.037412] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/tcp_cubic'
    [ 3.037417] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/acpi'
    [ 3.037421] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/ipv6'
    [ 3.037425] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/cpuidle'
    [ 3.037428] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/rcutree'
    [ 3.037432] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/block'
    [ 3.037436] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/btrfs'
    [ 3.037440] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/sysrq'
    [ 3.037444] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/zswap'
    [ 3.037448] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/crc32c_generic'
    [ 3.037453] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/firmware_class'
    [ 3.037457] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/workqueue'
    [ 3.037461] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/crc32c_intel'
    [ 3.037465] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/spurious'
    [ 3.037469] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/raid6_pq'
    [ 3.037473] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/configfs'
    [ 3.037477] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/netpoll'
    [ 3.037481] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/pci_slot'
    [ 3.037486] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/kernel'
    [ 3.037490] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/acpiphp'
    [ 3.037494] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/pciehp'
    [ 3.037498] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/printk'
    [ 3.037502] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/pstore'
    [ 3.037507] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/dynamic_debug'
    [ 3.037511] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/xz_dec'
    [ 3.037515] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/pcie_aspm'
    [ 3.037522] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/rcupdate'
    [ 3.037526] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/intel_idle'
    [ 3.037530] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/keyboard'
    [ 3.037534] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/pci_hotplug'
    [ 3.037548] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/cpu'
    [ 3.037552] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci'
    [ 3.037556] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pnp'
    [ 3.037559] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/spi'
    [ 3.037563] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/xen'
    [ 3.037567] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/acpi'
    [ 3.037571] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/node'
    [ 3.037575] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/clocksource'
    [ 3.037579] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/machinecheck'
    [ 3.037583] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/event_source'
    [ 3.037587] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/workqueue'
    [ 3.037591] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/container'
    [ 3.037595] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/memory'
    [ 3.037599] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci_express'
    [ 3.037603] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform'
    [ 3.037607] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/clockevents'
    [ 3.037611] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/xen-backend'
    [ 3.037628] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci/drivers/xen-platform-pci'
    [ 3.037633] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci/drivers/pcieport'
    [ 3.037638] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci/drivers/ioapic'
    [ 3.037642] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci/drivers/serial'
    [ 3.037653] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pnp/drivers/rtc_cmos'
    [ 3.037658] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pnp/drivers/serial'
    [ 3.037662] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pnp/drivers/system'
    [ 3.037675] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/acpi/drivers/ec'
    [ 3.037680] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/acpi/drivers/hpet'
    [ 3.037685] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/acpi/drivers/intel_smart_connect'
    [ 3.037691] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/acpi/drivers/hardware_error_device'
    [ 3.037716] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci_express/drivers/aer'
    [ 3.037721] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci_express/drivers/pcie_pme'
    [ 3.037726] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci_express/drivers/pciehp'
    [ 3.037735] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/alarmtimer'
    [ 3.037739] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/efi-framebuffer'
    [ 3.037744] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/vesa-framebuffer'
    [ 3.037748] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/serial8250'
    [ 3.037753] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/syscon'
    [ 3.037760] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/clk-lpt'
    [ 3.037842] systemd-udevd[62]: seq 697 queued, 'add' 'bus'
    [ 3.037860] systemd-udevd[62]: passed 119 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.037890] systemd-udevd[67]: seq 697 running
    [ 3.037891] systemd-udevd[62]: seq 698 queued, 'add' 'drivers'
    [ 3.037906] systemd-udevd[62]: seq 699 queued, 'add' 'drivers'
    [ 3.037909] systemd-udevd[67]: no db file to read /run/udev/data/+bus:acpi: No such file or directory
    [ 3.037921] systemd-udevd[62]: seq 700 queued, 'add' 'drivers'
    [ 3.037923] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.037925] systemd-udevd[67]: seq 697 processed with 0
    [ 3.037941] systemd-udevd[62]: seq 701 queued, 'add' 'drivers'
    [ 3.037963] systemd-udevd[62]: passed 134 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.037985] systemd-udevd[62]: passed 153 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.037988] systemd-udevd[67]: seq 698 running
    [ 3.037999] systemd-udevd[62]: passed 136 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038001] systemd-udevd[67]: no db file to read /run/udev/data/+drivers:ec: No such file or directory
    [ 3.038011] systemd-udevd[62]: passed 151 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038013] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.038015] systemd-udevd[67]: seq 698 processed with 0
    [ 3.038031] systemd-udevd[62]: seq 702 queued, 'add' 'bus'
    [ 3.038053] systemd-udevd[62]: passed 126 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038076] systemd-udevd[67]: seq 702 running
    [ 3.038079] systemd-udevd[62]: seq 703 queued, 'add' 'bus'
    [ 3.038088] systemd-udevd[67]: no db file to read /run/udev/data/+bus:clockevents: No such file or directory
    [ 3.038094] systemd-udevd[62]: passed 126 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038102] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.038106] systemd-udevd[67]: seq 702 processed with 0
    [ 3.038111] systemd-udevd[62]: seq 704 queued, 'add' 'bus'
    [ 3.038113] systemd-udevd[78]: seq 703 running
    [ 3.038126] systemd-udevd[62]: passed 124 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038134] systemd-udevd[78]: no db file to read /run/udev/data/+bus:clocksource: No such file or directory
    [ 3.038143] systemd-udevd[80]: seq 704 running
    [ 3.038145] systemd-udevd[62]: seq 705 queued, 'add' 'bus'
    [ 3.038152] systemd-udevd[78]: passed -1 bytes to netlink monitor 0x7f4fb498f600
    [ 3.038156] systemd-udevd[62]: passed 118 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038158] systemd-udevd[78]: seq 703 processed with 0
    [ 3.038163] systemd-udevd[80]: no db file to read /run/udev/data/+bus:container: No such file or directory
    [ 3.038175] systemd-udevd[62]: seq 706 queued, 'add' 'bus'
    [ 3.038177] systemd-udevd[80]: passed -1 bytes to netlink monitor 0x7f4fb49913d0
    [ 3.038179] systemd-udevd[80]: seq 704 processed with 0
    [ 3.038188] systemd-udevd[62]: passed 127 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038192] systemd-udevd[67]: seq 705 running
    [ 3.038201] systemd-udevd[78]: seq 706 running
    [ 3.038206] systemd-udevd[62]: seq 707 queued, 'add' 'bus'
    [ 3.038209] systemd-udevd[67]: no db file to read /run/udev/data/+bus:cpu: No such file or directory
    [ 3.038218] systemd-udevd[62]: passed 127 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038224] systemd-udevd[78]: no db file to read /run/udev/data/+bus:event_source: No such file or directory
    [ 3.038225] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.038228] systemd-udevd[67]: seq 705 processed with 0
    [ 3.038234] systemd-udevd[62]: seq 708 queued, 'add' 'bus'
    [ 3.038243] systemd-udevd[80]: seq 707 running
    [ 3.038243] systemd-udevd[78]: passed -1 bytes to netlink monitor 0x7f4fb498f600
    [ 3.038246] systemd-udevd[78]: seq 706 processed with 0
    [ 3.038254] systemd-udevd[76]: seq 700 running
    [ 3.038261] systemd-udevd[80]: no db file to read /run/udev/data/+bus:machinecheck: No such file or directory
    [ 3.038272] systemd-udevd[80]: passed -1 bytes to netlink monitor 0x7f4fb49913d0
    [ 3.038275] systemd-udevd[80]: seq 707 processed with 0
    [ 3.038276] systemd-udevd[76]: no db file to read /run/udev/data/+drivers:hpet: No such file or directory
    [ 3.038306] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
    [ 3.038310] systemd-udevd[76]: seq 700 processed with 0
    [ 3.038325] systemd-udevd[75]: seq 699 running
    [ 3.038343] systemd-udevd[75]: no db file to read /run/udev/data/+drivers:hardware_error_device: No such file or directory
    [ 3.038360] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
    [ 3.038364] systemd-udevd[75]: seq 699 processed with 0
    [ 3.038405] systemd-udevd[77]: seq 701 running
    [ 3.038419] systemd-udevd[77]: no db file to read /run/udev/data/+drivers:intel_smart_connect: No such file or directory
    [ 3.038429] systemd-udevd[77]: passed -1 bytes to netlink monitor 0x7f4fb498a250
    [ 3.038432] systemd-udevd[77]: seq 701 processed with 0
    [ 3.038531] systemd-udevd[62]: seq 708 forked new worker [81]
    [ 3.038591] systemd-udevd[62]: seq 709 queued, 'add' 'bus'
    [ 3.038612] systemd-udevd[62]: passed 119 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038623] systemd-udevd[81]: seq 708 running
    [ 3.038627] systemd-udevd[67]: seq 709 running
    [ 3.038631] systemd-udevd[62]: seq 710 queued, 'add' 'bus'
    [ 3.038640] systemd-udevd[62]: passed 118 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038648] systemd-udevd[67]: no db file to read /run/udev/data/+bus:node: No such file or directory
    [ 3.038653] systemd-udevd[75]: seq 710 running
    [ 3.038655] systemd-udevd[81]: no db file to read /run/udev/data/+bus:memory: No such file or directory
    [ 3.038657] systemd-udevd[62]: seq 711 queued, 'add' 'drivers'
    [ 3.038666] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.038671] systemd-udevd[62]: seq 712 queued, 'add' 'drivers'
    [ 3.038671] systemd-udevd[67]: seq 709 processed with 0
    [ 3.038676] systemd-udevd[81]: passed -1 bytes to netlink monitor 0x7f4fb49945b0
    [ 3.038678] systemd-udevd[75]: no db file to read /run/udev/data/+bus:pci: No such file or directory
    [ 3.038682] systemd-udevd[81]: seq 708 processed with 0
    [ 3.038693] systemd-udevd[62]: seq 713 queued, 'add' 'drivers'
    [ 3.038695] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
    [ 3.038700] systemd-udevd[75]: seq 710 processed with 0
    [ 3.038710] systemd-udevd[62]: seq 714 queued, 'add' 'drivers'
    [ 3.038721] systemd-udevd[62]: passed 137 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038732] systemd-udevd[62]: passed 139 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038734] systemd-udevd[67]: seq 711 running
    [ 3.038753] systemd-udevd[76]: seq 713 running
    [ 3.038753] systemd-udevd[67]: no db file to read /run/udev/data/+drivers:ioapic: No such file or directory
    [ 3.038779] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.038782] systemd-udevd[76]: no db file to read /run/udev/data/+drivers:serial: No such file or directory
    [ 3.038784] systemd-udevd[67]: seq 711 processed with 0
    [ 3.038797] systemd-udevd[75]: seq 712 running
    [ 3.038799] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
    [ 3.038803] systemd-udevd[76]: seq 713 processed with 0
    [ 3.038810] systemd-udevd[62]: passed 137 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038815] systemd-udevd[75]: no db file to read /run/udev/data/+drivers:pcieport: No such file or directory
    [ 3.038823] systemd-udevd[62]: passed 147 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038841] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
    [ 3.038845] systemd-udevd[75]: seq 712 processed with 0
    [ 3.038849] systemd-udevd[77]: seq 714 running
    [ 3.038856] systemd-udevd[62]: seq 715 queued, 'add' 'bus'
    [ 3.038864] systemd-udevd[77]: no db file to read /run/udev/data/+drivers:xen-platform-pci: No such file or directory
    [ 3.038871] systemd-udevd[62]: passed 126 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038876] systemd-udevd[77]: passed -1 bytes to netlink monitor 0x7f4fb498a250
    [ 3.038878] systemd-udevd[77]: seq 714 processed with 0
    [ 3.038891] systemd-udevd[62]: seq 716 queued, 'add' 'drivers'
    [ 3.038915] systemd-udevd[62]: seq 717 queued, 'add' 'drivers'
    [ 3.038928] systemd-udevd[62]: seq 718 queued, 'add' 'drivers'
    [ 3.038941] systemd-udevd[62]: seq 719 queued, 'add' 'bus'
    [ 3.038953] systemd-udevd[62]: passed 123 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.038976] systemd-udevd[75]: seq 719 running
    [ 3.038977] systemd-udevd[62]: seq 720 queued, 'add' 'drivers'
    [ 3.038990] systemd-udevd[75]: no db file to read /run/udev/data/+bus:platform: No such file or directory
    [ 3.038991] systemd-udevd[62]: seq 721 queued, 'add' 'drivers'
    [ 3.039001] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
    [ 3.039004] systemd-udevd[75]: seq 719 processed with 0
    [ 3.039005] systemd-udevd[62]: seq 722 queued, 'add' 'drivers'
    [ 3.039034] systemd-udevd[62]: seq 723 queued, 'add' 'drivers'
    [ 3.039046] systemd-udevd[62]: passed 146 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.039070] systemd-udevd[75]: seq 720 running
    [ 3.039078] systemd-udevd[76]: seq 721 running
    [ 3.039081] systemd-udevd[75]: no db file to read /run/udev/data/+drivers:alarmtimer: No such file or directory
    [ 3.039092] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
    [ 3.039094] systemd-udevd[75]: seq 720 processed with 0
    [ 3.039101] systemd-udevd[76]: no db file to read /run/udev/data/+drivers:clk-lpt: No such file or directory
    [ 3.039128] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
    [ 3.039133] systemd-udevd[76]: seq 721 processed with 0
    [ 3.039146] systemd-udevd[67]: seq 715 running
    [ 3.039162] systemd-udevd[67]: no db file to read /run/udev/data/+bus:pci_express: No such file or directory
    [ 3.039177] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
    [ 3.039181] systemd-udevd[67]: seq 715 processed with 0
    [ 3.039188] systemd-udevd[62]: passed 143 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.039200] systemd-udevd[62]: passed 151 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.039221] systemd-udevd[62]: passed 146 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.039224] systemd-udevd[77]: seq 722 running
    [ 3.039235] systemd-udevd[78]: seq 723 running
    [ 3.039244] systemd-udevd[77]: no db file to read /run/udev/data/+drivers:efi-framebuffer: No such file or directory
    [ 3.039244] systemd-udevd[62]: seq 724 queued, 'add' 'drivers'
    [ 3.039255] systemd-udevd[78]: no db file to read /run/udev/data/+drivers:serial8250: No such file or directory
    [ 3.039257] systemd-udevd[62]: passed 142 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.039263] systemd-udevd[77]: passed -1 bytes to netlink monitor 0x7f4fb498a250
    [ 3.039267] systemd-udevd[77]: seq 722 processed with 0
    [ 3.039269] systemd-udevd[62]: passed 147 bytes to netlink monitor 0x7f4fb497f0d0
    [ 3.039273] systemd-udevd[78]: passed -1 bytes to netlink monitor 0x7f4fb498f600
    [ 3.039277] systemd-udevd[78]: seq 723 processed with 0
    [ 3.039284] systemd-udevd[75]: seq 717 running
    [ 3.039288] systemd-udevd[76]: seq 718 running
    [ 3.039298] systemd-udevd[75]: no db file to read /run/udev/data/+drivers:pcie_pme: No such file or directory
    [ 3.039306] systemd-udevd[76]: no db file to read /run/udev/data/+drivers:pciehp: No such file or directory
    [ 3.039309] sys

    Guys, I think I've found the strange thing.
    First, in the recovery shell, when I type "lvm lvscan", it prints:
    WARNING: lvmetad is running but disabled. Restart lvmetad before enabling it!
    and then it says that all four my logical volumes root,boot,home and var are inactive.
    So I tried to set them up manually, with "lvm vgchange -a y", and guess what happened: I was able to boot!
    I still haven't managed to understand the real causes of this problem, but basically it seems that I have the same problem explained here: https://bbs.archlinux.org/viewtopic.php?id=184340.
    The only difference is that there the OP says to have solved the problem with an upgrade to Linux 3.15.7, while it appeared to me with the upgrade to 3.18.3, and as I said it doesn't go away neither with a downgrade nor with another upgrade to version 3.18.4
    Last edited by rdm (2015-01-29 21:55:44)

  • Unable to find line break between two lines in attachment file.

    Dear all I will be very great full if someone help me out,
    I am trying to send mail through SMTP server with an attachment of oracle report, but I am unable to find line break between two lines, when I down load the attachment from mail and open attach.txt file by double click on it. Next line starts right after previous line ends, it should starts with new line.
    In order to send an attachment file, I am reading source file line by line and put MIME protocol’s attachment instance, contain of source file is being properly written into target file if I open that attachment on cmd prompt.
    Following code may help you to understand the case.
    Thanks in advance.
    My code is as follows:-
    create or replace procedure bec_file_test
    v_subject varchar2, -- Subject of the email
    v_body varchar2, -- Body of the email
    v_from VARCHAR2 default 'XYZ.com', -- sender mail id
    v_to varchar2 default 'XYZ.com', -- Field To of the email
    v_cc varchar2 default 'XYZ.com' -- cc address
    ) is
    -- variable to hold the smtp server connection
    v_smtp_connection utl_smtp.connection;
    -- variable to hold the smtp host name
    v_smtp_host varchar2(100) default 'mail.bec-group.com';
    -- variable to hold the smtp port
    v_smtp_port number default 25;
    -- composite of {CR}{LF} caridge return and line feed.
    CRLF varchar2(2):=CHR(13)||CHR(10);
    cursor pr_rec is
    select requisition_no,line_no,release_no,a.contract,
    a.project_id,substr(a.activity_seq,1,11)ACT_SEQ,
    substr(a.part_no,1,12)PART_NO,
    substr(a.description,1,32)DESCRIPTION,
    substr(a.Bal_qty,1,8) BAL_QTY,
    substr(a.unit_meas,1,5)UOM,
    a.wanted_receipt_date WAN_REC_DT,
    a.latest_order_date LAT_ORD_DT
    from bec_pr_line_rep a
    where a.Bal_qty>0 and a.header_state not in 'Closed'
    and upper(a.state1) like 'RELEASED' and a.contract not in ('U1ENG','ULENG','U1FND','U2FND')
    and a.buyer_code='70306'
    order by a.part_no;
    begin
    declare
    fHandle UTL_FILE.FILE_TYPE;
    v_msg_line varchar2(2000);
    -- v_buffer varchar2(20000);
    --ALTER SYSTEM SET utl_file_dir = 'D:\Database\temp'
    --COMMENT='Temporary change on Dec 14'
    --SCOPE=SPFILE;
    SELECT name, value
    FROM gv$parameter
    WHERE name = 'utl_file_dir';
    --drop directory my_directory
    --CREATE or replace DIRECTORY my_directory AS 'D:\database\temp';
    --GRANT read,write ON DIRECTORY my_directory TO PUBLIC;
    begin ---writing data into a file.
    fHandle := UTL_FILE.FOPEN('MY_DIRECTORY', 'pending_pr_summry.txt', 'w');
    UTL_FILE.put_line(fHandle, ' Pending PR to process (detail report)');
    UTL_FILE.put_line(fHandle,TO_CHAR(SYSDATE,'MM-DD-YY HH:MI:SS AM'));
    UTL_FILE.put_line(fHandle, '--------------------------------------------------------------------------------------------------------------------------------------------------');
    UTL_FILE.put_line(fHandle, 'Req.no. li Re Site Prj Id Act seq Part no Description Qty UOM want rec dt lat ord dt' );
    UTL_FILE.put_line(fHandle, '--------------------------------------------------------------------------------------------------------------------------------------------------');
    for pr_temp in pr_rec loop
    begin
    v_msg_line:=to_char(rpad(pr_temp.requisition_no,12,' ')||'|'||
    lpad(pr_temp.line_no,3,' ')||'|'||
    lpad(pr_temp.release_no,3,' ')||'|'||
    rpad(pr_temp.contract,7,' ')||'|'||
    lpad(nvl(pr_temp.project_id,' '),7,' ')||'|'||
    lpad(nvl(pr_temp.act_seq,' '),12,' ')||'|'||
    lpad(pr_temp.part_no,12,' ')||'|'||
    rpad(pr_temp.description,35,' ')||'|'||
    lpad(pr_temp.bal_qty,10,' ')||'|'||
    rpad(pr_temp.uom,6,' ')||'|'||
    lpad(pr_temp.wan_rec_dt,14,' ')||'|'||
    lpad(pr_temp.lat_ord_dt,14,' '));
    UTL_FILE.put_line(fHandle,v_msg_line);
    end;
    end loop;
    UTL_FILE.put_line(fHandle, '--------------------------------------------------------------------------------------------------------------------------------------------------');
    UTL_FILE.put_line(fHandle, ' Regards : IFSAPP ( Application owner ) ');
    UTL_FILE.FCLOSE(fHandle); ------------writing into file is successfuly done here!
    --Reading of file starts here containt will be added in attchment file
    fHandle :=UTL_FILE.FOPEN('MY_DIRECTORY','pending_pr_summry.txt','R' );
    -- establish the connection to the smtp server
    v_smtp_connection := utl_smtp.open_connection(v_smtp_host, v_smtp_port); /** OPEN CONNECTION ON THE SERVER **/
    -- perform a handshake with the smtp server
    utl_smtp.helo(v_smtp_connection, v_smtp_host); /** DO THE INITIAL HAND SHAKE **/
    -- set the 'from' address of the message
    utl_smtp.mail(v_smtp_connection, v_from);
    -- add the recipient to the message
    utl_smtp.rcpt(v_smtp_connection, v_to);
    -- send the email
    utl_smtp.open_data(v_smtp_connection);
    v_msg_line:='Date: ' || TO_CHAR( SYSDATE, 'dd Mon yy hh24:mi:ss' ) || CRLF ||
    'From: ' || v_from || CRLF ||
    'Subject: ' || v_subject || CRLF ||
    'To: ' || v_to || CRLF ||
    'Cc: ' || v_cc || CRLF ||
    'MIME-Version: 1.0'|| CRLF || -- Use MIME mail standard
    'Content-Type: multipart/mixed;'||CRLF ||
    ' boundary="-----SECBOUND"'||CRLF||
    CRLF ||'-------SECBOUND'|| CRLF ||
    'Content-Type: text/plain;'|| CRLF ||
    'Content-Transfer_Encoding: 7bit'|| CRLF ||
    CRLF ||v_body|| CRLF;     -- Message body
    utl_smtp.write_data(v_smtp_connection,v_msg_line);
    v_msg_line:='-------SECBOUND'|| CRLF ||
    'Content-Type: application/octet-stream;'|| CRLF ||
    'Content-Type: text/plain;'|| CRLF ||
    'name="pending_pr_summry.txt"'|| CRLF ||
    'Content-Transfer_Encoding: 8bit'|| CRLF ||
    'Content-Disposition: attachment;'|| CRLF ||
    ' filename="pending_pr_summry.txt"'|| CRLF || CRLF;     -- Content of attachment
    utl_smtp.write_data(v_smtp_connection,v_msg_line);
    -- check file is opened
    IF utl_file.is_open(fHandle) THEN
    -- loop lines in the file
    LOOP
    BEGIN -- Content of attachment
    utl_file.get_line(fHandle,v_msg_line);
    v_msg_line:=concat(v_msg_line,CRLF);
    utl_smtp.write_data(v_smtp_connection,v_msg_line);
    EXCEPTION
    WHEN NO_DATA_FOUND THEN
    EXIT;
    END;
    END LOOP;
    END IF;
    --end of attachment containt     
    utl_smtp.write_data(v_smtp_connection,v_msg_line);
    UTL_FILE.FCLOSE(fHandle);
    utl_smtp.close_data(v_smtp_connection);
    utl_smtp.quit(v_smtp_connection);
    exception
    when utl_smtp.invalid_operation then
    dbms_output.put_line(' Invalid Operation in Mail attempt using UTL_SMTP.');
    when utl_smtp.transient_error then
    dbms_output.put_line(' Temporary e-mail issue - try again');
    when utl_smtp.permanent_error then
    dbms_output.put_line(' Permanent Error Encountered.');
    when others then
    dbms_output.put_line('Exception: SQLCODE=' || SQLCODE || ' SQLERRM=' || SQLERRM);
    RAISE;
    end;
    end bec_file_test;

    Pending PR to process (detail report)01-17-13 12:43:19 PM--------------------------------------------------------------------------------------------------------------------------------------------------Req.no. li Re Site Prj Id Act seq Part no Description Qty UOM want rec dt lat ord dt--------------------------------------------------------------------------------------------------------------------------------------------------MAT/250370 | 2| 1|ISCSP | 4977| 100004207| 0104000016|Angle 50 X 50 X 6 IS:2062 Grade |500|kg |30-NOV-2012| 20-nov-2012MAT/250370 | 3| 1|ISCSP | 4977| 100004207| 0105000002|Channel 100 X 50 IS:2062 Grade A | 1000|kg | 30-NOV-2012| 20-nov-2012MAT/250579 | 2| 1|NMDCJ | 6001| 100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 2991|kg | 13-DEC-2012| 03-dec-2012MAT/250606 | 2| |NMDCJ | 6002| 100005860| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | |1|NMDCJ|6001|100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 1500|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 3| 1|NMDCJ | 6002| 100005818| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 3939|kg | 29-DEC-2012| 19-dec-2012MAT/250606 | 4| 1|NMDCJ | 6002| 100005860| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 39000|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | 4| 1|NMDCJ | 6001| 100005580| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 2| 1|NMDCJ | 6002| 100005818| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 12183|kg | 29-DEC-2012| 19-dec-2012MAT/250606 | 6| 1|NMDCJ | 6002| 100005860| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 9500|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | 6| 1|NMDCJ | 6001| 100005580| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 6| 1|NMDCJ | 6002| 100005818| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | 7| 1|NMDCJ | 6001| 100005580| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 22000|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 7| 1|NMDCJ | 6002| 100005818| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 27060|kg | 29-DEC-2012| 19-dec-2012MAT/251138 | 1| 1|NMDCJ | 6002| 100005825| 3501000001|Cement 50 kg | 1|pkt | 25-DEC-2013| 14-dec-2013--------------------------------------------------------------------------------------------------------------------------------------------------
    where as source file is like that:-
    Pending PR to process (detail report)
    01-17-13 12:43:19 PM
    Req.no. li Re Site Prj Id Act seq Part no Description Qty UOM want rec dt lat ord dt
    MAT/250370 | 2| 1|ISCSP | 4977| 100004207| 0104000016|Angle 50 X 50 X 6 IS:2062 Grade | 5500|kg | 30-NOV-2012| 20-nov-2012
    MAT/250370 | 3| 1|ISCSP | 4977| 100004207| 0105000002|Channel 100 X 50 IS:2062 Grade A | 1000|kg | 30-NOV-2012| 20-nov-2012
    MAT/250579 | 2| 1|NMDCJ | 6001| 100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 2991|kg | 13-DEC-2012| 03-dec-2012
    MAT/250606 | 2| 1|NMDCJ | 6002| 100005860| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012
    MAT/250607 | 2| 1|NMDCJ | 6001| 100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 1500|kg | 29-DEC-2012| 19-dec-2012
    MAT/250194 | 3| 1|NMDCJ | 6002| 100005818| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 3939|kg | 29-DEC-2012| 19-dec-2012
    MAT/250606 | 4| 1|NMDCJ | 6002| 100005860| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 39000|kg | 29-DEC-2012| 19-dec-2012
    MAT/250607 | 4| 1|NMDCJ | 6001| 100005580| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012
    MAT/250194 | 2| 1|NMDCJ | 6002| 100005818| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 12183|kg | 29-DEC-2012| 19-dec-2012
    MAT/250606 | 6| 1|NMDCJ | 6002| 100005860| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 9500|kg | 29-DEC-2012| 19-dec-2012
    MAT/250607 | 6| 1|NMDCJ | 6001| 100005580| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012
    MAT/250194 | 6| 1|NMDCJ | 6002| 100005818| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012
    MAT/250607 | 7| 1|NMDCJ | 6001| 100005580| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 22000|kg | 29-DEC-2012| 19-dec-2012
    MAT/250194 | 7| 1|NMDCJ | 6002| 100005818| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 27060|kg | 29-DEC-2012| 19-dec-2012
    MAT/251138 | 1| 1|NMDCJ | 6002| 100005825| 3501000001|Cement 50 kg | 1 |pkt | 25-DEC-2013| 14-dec-2013
    Ignore alignment. It is well formatted in source file.

  • HP ENVY 4501 e-All-in-O​ne: Unable to Find Printer

    I just recently got a HP ENVY 4501 e-All-in-One.  The printer is connected wirelessly to my router but after I installed the software, it was unable to find the printer.  I have tried it on 3 different computers.  2 with Windows 7 and the other with Windows Vista.  How can I get the computers to find the printer? Also, can a  Linux system also use the printer? 
    Thanks. 

    Hi blanchard10,
    Welcome to the HP Forums.
    I see that you are having some installation issues.
    Just so you are aware, no Linux driver is available for this printer at this time.
    I do have a few steps that we can try in the attempt to install the printer on to your Windows 7 and Vista computers.
    First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    Seeing that you are attempting to install the printer with a wireless connection, we do need to have the software and drivers installed on to each computer.
    Here is the HP ENVY 4500 e-All-in-One Printer series Full Feature Software and Drivers.
    Please make sure that you do NOT have any firewalls or anti virus protection running while doing the installation.
    Save the download to the Desktop of the computers so that it creates its own icon.  This will make it easy to find the download when it is completed on each computer.  Double click the new icon and follow the installation instructions.  The installation will give you connection options.  Select wireless.
    On the front panel of the printer, we will need to go through the Wireless Setup Wizard.  To get to the Wizard we will need to be on the main display of the printer and touch the Wireless icon on the top of the printer window.  Select Settings and then select the Wireless Setup Wizard and follow the instructions to connect to the network.  You will need the IP address once the printer is connected to add to each computer when prompted to do so.
    Please write me back if you are still having issues or if you have any other questions.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Setup Assistant unable to find base station

    Ok I am new to wireless so here goes. I have a iMac G5 2.0 running 10.4. I just bought the base station today. I am trying to use dsl with PPPoE. I have checked those settings about a 100 times. The same settings and cable I am using to post here to this forum thru ethernet.
    I plug in the base and when I get the flashing amber it is recognized in the internet connet app with a full signal strength. If I try to connect it tells me it cannot locate the server.
    When I try the setup assist app and select 'Set up a new Airport Base Station' and hit continue. it immediately say it found a new Airport Express base station and includes the name. But when I hit continue again it takes a minute to think the brings up a error message. '...unable to find your base station.
    I also come up empty with the Airport Admin utility. Nothing shows in it.
    I hope someone can help. Thanks.
    Jeffrey Dalton

    Whether or not a sound system is plugged into the Airport Express has no influence on the generation of this error message by the Airport Setup Assistant.
    I have a distinct feeling I'm going to be reiterating everything the people at Mac support told you to do (so it would be helpful to tell us at the start what you have tried thus far to solve the problem) but the next thing I would recommend is a factory default reset of the Airport Express per:
    http://docs.info.apple.com/article.html?artnum=108044
    The other thing that can cause all sorts of grief is any non-Apple firewall software you might have installed on this Mac - that includes firewalls, "internet protection" software, and VPN client software. The MacOS built in firewall is OK - but all this other baggage should either be disabled or uninstalled.

  • JRockit Management console unable to find classes in Method profiler

    I have no problem to connect the console to the right JVM.
    All tabs work OK so I can see memory and CPU usage. I can even do Method profiling on plain Java objects like String and Long but whenever I specify one of my classes (full path name) I'm unable to find them.
    Any help would be really appreciated,
    MV

    Hi,
    We've tried this internally now, and it works as designed - as long as the class has been loaded, i.e. if any classloader has loaded the class, it will be reachable and should show up properly. If the class hasn't been loaded yet, however, it will not show.
    For instance, say a class C is reachable by only loader L. Trying to retrieve the methods of C before it has been loaded by L will fail. After L.loadClass("C") or similar has been executed the class should show up.
    Kind regards,
    Marcus

  • How Do You Solve the Xcode 6.1.1, Playground's "unable to find suitable target device"?

    Hi. I've reset Xcode 6.1.1 (I'm on Yosemite 10.10.2), have restarted the iMac (late 2009), have plugged in via USB the iPhone 5 (runs 8.1.3), resetted even the SMC and PRAM but I still get the Playground error: "unable to find suitable target device".
    I checked the Xcode's Preferences - Downloads, on the Components pane or window it says iOS 7.1 Simulator which you could download but when I try to download it, it's just a blank progress bar, even if left for hours, it's not downloading at all. Yet when I press update and install in Preferences - Downloads, it checks it but says there's not update (if there's no update why is iOS 7.1 Simulator an option to be downloaded in the Components window?).
    How do you solve this. Do I need to reset XCode at a more deeper level? Could this be a bug in 6.1.1 update?
    Thank you in advance. God bless, Rev. 21:4

    Hi. I've reset Xcode 6.1.1 (I'm on Yosemite 10.10.2), have restarted the iMac (late 2009), have plugged in via USB the iPhone 5 (runs 8.1.3), resetted even the SMC and PRAM but I still get the Playground error: "unable to find suitable target device".
    I checked the Xcode's Preferences - Downloads, on the Components pane or window it says iOS 7.1 Simulator which you could download but when I try to download it, it's just a blank progress bar, even if left for hours, it's not downloading at all. Yet when I press update and install in Preferences - Downloads, it checks it but says there's not update (if there's no update why is iOS 7.1 Simulator an option to be downloaded in the Components window?).
    How do you solve this. Do I need to reset XCode at a more deeper level? Could this be a bug in 6.1.1 update?
    Thank you in advance. God bless, Rev. 21:4

  • Unable to find data in RSA3 for particular fields2lis_04_p_arbpl datasource

    I am working with datasource 2lis_04_p_arbpl to construct Yield Report. I have a field GAMNG(Target Quantity) in the table AFKO, so I added it to the communication structure and activated it. I also want the field IGMNG(confirmed quantity) which is available in the table AFKO but not appearing in the pool tables of ARBPL datasource, so I have done datasource enhancement and obtained the field in the datasource. When I am checking for the data in RSA3, unable to find data(zero values) for both the fields.
    Edited by: bhagav on Jan 5, 2012 1:20 PM

    Hi ,
    Please make sure that you are doing the extractor check in Update mode 'Full' .If the setup tables are filled then this should pick the data for the 2 newly added fields .
    check and update accordingly later .
    Thanks
    Kamal Mehta

  • BRCONNECT unable to find oracle library

    Hi
    After SAP upgrade to Netweaver 7.0 with Oracle 10.2 on HP-UX system, the BRCONNECT program unable to execute DBA jobs. It is ending with following error with user <sid>adm
    Execute logical command BRCONNECT On host <wxyz>
    Parameters: -u / -jid CHECK20080812023451 -c -f check
    /usr/lib/pa20_64/dld.sl: Unable to find library 'libclntsh.sl.10.1'.
    Process died due to signal 9
    And if I run it using user ora<sid>, it ends with insufficient privileges.
    BR0801I BRCONNECT 7.00 (32)
    BR0301E SQL error -1031 at location BrLicCheck-14, SQL statement:
    'SELECT COUNT(*) FROM SAP_SAPLIKEY'
    ORA-01031: insufficient privileges
    BR0804I BRCONNECT terminated with errors
    The roles granted to users OPS$<SID>ADM and OPS$ORA<SID> are RESOURCE, CONNECT and SAPDBA.
    please provide your inputs on these issues i.e. how to make the oracle library available when running brconnect using <sid>adm user and how to remove the "ORA-01031: insufficient privileges"  when running brconnect using ora<sid> user.
    Thanks
    Vinod

    Hi All
    I have tried executing it on <sid>adm commandline but it is giving same error.
    >brconnect -u / -c -f check
    /usr/lib/pa20_64/dld.sl: Unable to find library 'libclntsh.sl.10.1'.
    Killed
    The following are the env for <sid>adm
    _=/usr/bin/env
    THREAD=NOPS
    SHLIB_PATH=/usr/sap/<SID>/SYS/exe/run:/oracle/client/10x_64/instantclient
    ORACLE_PSRV=<SID>
    PATH=/oracle/<SID>/102_64/bin:/home/<SID>adm:/usr/sap/<SID>/SYS/exe/run:/opt/sudo/bin:/opt/sudo/sbin:/usr/bin:/opt/ansic/bin:/usr/ccs/bin:/usr/contrib/bin:/opt/hparray/bin:/opt/nettladm/bin:/opt/upgrade/bin:/opt/fcms/bin:/opt/pd/bin:/usr/bin/X11:/usr/contrib/bin/X11:/opt/resmon/bin:/opt/perf/bin:/opt/prm/bin:/opt/mx/bin:/opt/ignite/bin:/opt/gnome/bin:/opt/mozilla:/opt/wbem/bin:/opt/wbem/sbin:/opt/langtools/bin:/opt/imake/bin:/opt/graphics/common/bin:/usr/sbin/diag/contrib:/opt/sudo/bin:/opt/networker/bin:/opt/hpnpl//bin:/opt/OV/bin/OpC:/opt/OV/bin:/opt/cfg2html:/opt/ssh/bin:/opt/java1.4/bin:.
    NLS_LANG=AMERICAN_AMERICA.WE8DEC
    COLUMNS=125
    ORACLE_BASE=/oracle
    EDITOR=vi
    LOGNAME=<sid>adm
    dbs_ora_tnsname=<SID>
    ORACLE_SID=<SID>
    ERASE=^H
    PS1=
    <sid>adm>
    DB_SID=<SID>
    DIR_LIBRARY=/usr/sap/<SID>/SYS/exe/run
    ORA_NLS10=/oracle/<SID>/102_64/nls/data
    dbs_ora_schema=SAP<SID>
    SHELL=/usr/bin/sh
    JAVA_HOME=/opt/java1.4/bin
    SAPDATA_HOME=/oracle/<SID>
    HOME=/home/<SID>adm
    TERM=xterm
    ORACLE_HOME=/oracle/<SID>/102_64
    PWD=/home/<SID>adm
    TZ=CST6CDT
    dbms_type=ORA
    SAPSYSTEMNAME=<SID>
    LINES=44
    The following is command outputs as requested by Fidel
    ls -lR /oracle/client
    drwxr-xr-x   3 ora<sid>     dba           1024 May 30 11:32 10x_64
    drwxr-xr-x   8 ora<sid>     dba           1024 Jan 10  2007 9207
    drwxr-xr-x   4 ora<sid>     dba             96 Mar 12  2004 92x_64
    /oracle/client/10x_64:
    total 87438
    -rwxr-xr-x   1 ora<sid>     dba        44765594 May 30 11:28 OCL10264.SAR.1
    -rw-rr   1 ora<sid>     dba            100 May  4  2006 dbclient.lst
    lrwxr-xr-x   1 ora<sid>     dba             19 May 30 11:32 instantclient -> instantclient_10202
    drwxr-xr-x   2 ora<sid>     dba           1024 May  4  2006 instantclient_10202
    /oracle/client/10x_64/instantclient_10202:
    total 231858
    -rrr--   1 ora<sid>     dba        1594191 Apr 20  2006 classes12.jar
    -rwxr-xr-x   1 ora<sid>     dba        36684488 Apr 20  2006 libclntsh.so.10.1
    -rwxr-xr-x   1 ora<sid>     dba        5231200 Apr 20  2006 libnnz10.so
    -rwxr-xr-x   1 ora<sid>     dba        3322720 Apr 20  2006 libocci.so.10.1
    -rwxr-xr-x   1 ora<sid>     dba        70117848 Apr 20  2006 libociei.so
    -rwxr-xr-x   1 ora<sid>     dba         201112 Apr 20  2006 libocijdbc10.so
    -rrr--   1 ora<sid>     dba        1540457 Apr 20  2006 ojdbc14.jar
    /oracle/client/9207:
    total 2
    drwxr-xr-x   5 ora<sid>     dba             96 Jan 10  2007 jdbc
    drwxr-xr-x   2 ora<sid>     dba           1024 Jan 10  2007 lib
    drwxr-xr-x   3 ora<sid>     dba             96 Jan 10  2007 network
    drwxr-xr-x   3 ora<sid>     dba             96 Jan 10  2007 ocommon
    drwxr-xr-x   5 ora<sid>     dba             96 Jan 10  2007 oracore
    drwxr-xr-x   3 ora<sid>     dba             96 Jan 10  2007 rdbms
    /oracle/client/9207/jdbc:
    total 62
    -rwxr-xr-x   1 ora<sid>     dba          30654 Jan 10  2007 Readme.txt
    drwxr-xr-x   2 ora<sid>     dba             96 Jan 10  2007 demo
    drwxr-xr-x   2 ora<sid>     dba             96 Jan 10  2007 doc
    drwxr-xr-x   2 ora<sid>     dba           1024 Jan 10  2007 lib
    /oracle/client/9207/jdbc/demo:
    total 880
    -rwxr-xr-x   1 ora<sid>     dba         450560 Jan 10  2007 demo.tar
    /oracle/client/9207/jdbc/doc:
    total 14140
    -rwxr-xr-x   1 ora<sid>     dba        3619840 Jan 10  2007 javadoc.tar
    -rwxr-xr-x   1 ora<sid>     dba        3619840 Jan 10  2007 jdbcdoc.tar
    /oracle/client/9207/jdbc/lib:
    total 34090
    -rwxr-xr-x   1 ora<sid>     dba        1413613 Jan 10  2007 classes111_g.jar
    -rwxr-xr-x   1 ora<sid>     dba        1423863 Jan 10  2007 classes111_g.zip
    -rwxr-xr-x   1 ora<sid>     dba        1234433 Jan 10  2007 classes12.jar
    -rwxr-xr-x   1 ora<sid>     dba        1245538 Jan 10  2007 classes12.zip
    -rwxr-xr-x   1 ora<sid>     dba        1476640 Jan 10  2007 classes12_g.jar
    -rwxr-xr-x   1 ora<sid>     dba        1487705 Jan 10  2007 classes12_g.zip
    -rwxr-xr-x   1 ora<sid>     dba        1240587 Jan 10  2007 classes12dms.jar
    -rwxr-xr-x   1 ora<sid>     dba        1483154 Jan 10  2007 classes12dms_g.jar
    -rwxr-xr-x   1 ora<sid>     dba        1848170 Jan 10  2007 nls_charset12.jar
    -rwxr-xr-x   1 ora<sid>     dba        1878202 Jan 10  2007 nls_charset12.zip
    -rwxr-xr-x   1 ora<sid>     dba          37761 Jan 10  2007 ocrs12.jar
    -rwxr-xr-x   1 ora<sid>     dba          37785 Jan 10  2007 ocrs12.zip
    -rwxr-xr-x   1 ora<sid>     dba        1212964 Jan 10  2007 ojdbc14.jar
    -rwxr-xr-x   1 ora<sid>     dba        1427311 Jan 10  2007 ojdbc14_g.jar
    /oracle/client/9207/lib:
    total 52960
    lrwxr-xr-x   1 ora<sid>     dba             16 May 27 08:31 libclntsh.so -> libclntsh.so.9.0
    -rwxrwxrwx   1 ora<sid>     dba        25754472 Jan 10  2007 libclntsh.so.9.0
    -rwxr-xr-x   1 ora<sid>     dba         406606 Jan 10  2007 libocijdbc9.a
    -rwxr-xr-x   1 ora<sid>     dba         226656 Jan 10  2007 libocijdbc9.so
    -rwxr-xr-x   1 ora<sid>     dba         284592 Jan 10  2007 libocijdbc9_g.so
    -rwxr-xr-x   1 ora<sid>     dba         421258 Jan 10  2007 libocijdbcst9.a
    -rwxr-xr-x   1 ora<sid>     dba          18664 Jan 10  2007 libwtc9.so
    /oracle/client/9207/network:
    total 2
    drwxr-xr-x   2 ora<sid>     dba           1024 May 30 13:46 admin
    /oracle/client/9207/network/admin:
    total 8
    -rw-rr   1 ora<sid>     dba             24 May 29 15:38 snmp_ro.ora
    -rw-r-xr-x   1 ora<sid>     dba            277 May 29 15:38 sqlnet.ora
    -rw-r-xr-x   1 ora<sid>     dba           1332 May 29 15:38 tnsnames.ora.old
    /oracle/client/9207/ocommon:
    total 0
    drwxr-xr-x   3 ora<sid>     dba             96 Jan 10  2007 nls
    /oracle/client/9207/ocommon/nls:
    total 0
    drwxr-xr-x   3 ora<sid>     dba             96 Jan 10  2007 admin
    /oracle/client/9207/ocommon/nls/admin:
    total 28
    drwxr-xr-x   2 ora<sid>     dba          14336 Jan 10  2007 data
    /oracle/client/9207/ocommon/nls/admin/data:
    total 41676
    -rwxr-xr-x   1 ora<sid>     dba            721 Jan 10  2007 lx00001.nlb
    -rwxr-xr-x   1 ora<sid>     dba         124146 Jan 10  2007 lx607d01.nlb
    /oracle/client/9207/oracore:
    total 2
    drwxr-xr-x   2 ora<sid>     dba             96 Jan 10  2007 lib
    drwxr-xr-x   2 ora<sid>     dba           1024 Jan 10  2007 mesg
    drwxr-xr-x   2 ora<sid>     dba             96 Jan 10  2007 zoneinfo
    /oracle/client/9207/oracore/lib:
    total 4210
    -rwxr-xr-x   1 ora<sid>     dba        2155296 Jan 10  2007 libcore9.so
    /oracle/client/9207/oracore/mesg:
    total 116
    -rwxr-xr-x   1 ora<sid>     dba           8704 Jan 10  2007 lfiesa.msb
    -rwxr-xr-x   1 ora<sid>     dba           7168 Jan 10  2007 lfius.msb
    -rwxr-xr-x   1 ora<sid>     dba          27588 Jan 10  2007 lfius.msg
    -rwxr-xr-x   1 ora<sid>     dba           4608 Jan 10  2007 lrmesa.msb
    -rwxr-xr-x   1 ora<sid>     dba           4608 Jan 10  2007 lrmus.msb
    -rwxr-xr-x   1 ora<sid>     dba           4441 Jan 10  2007 lrmus.msg
    /oracle/client/9207/oracore/zoneinfo:
    total 1022
    -rwxr-xr-x   1 ora<sid>     dba           2297 Jan 10  2007 readme.txt
    -rwxr-xr-x   1 ora<sid>     dba         370494 Jan 10  2007 timezlrg.dat
    -rwxr-xr-x   1 ora<sid>     dba         148797 Jan 10  2007 timezone.dat
    /oracle/client/9207/rdbms:
    total 2
    drwxr-xr-x   2 ora<sid>     dba           1024 Jan 10  2007 mesg
    /oracle/client/9207/rdbms/mesg:
    total 8854
    -rwxr-xr-x   1 ora<sid>     dba           8704 Jan 10  2007 bbedus.msb
    -rwxr-xr-x   1 ora<sid>     dba         124079 Jan 10  2007 ulus.msg
    /oracle/client/92x_64:
    total 0
    drwxr-xr-x   2 ora<sid>     dba             96 Mar 12  2004 ietc
    lrwxr-xr-x   1 ora<sid>     dba             23 Mar 12  2004 jdbc -> /oracle/<sid>/920_64/jdbc
    lrwxr-xr-x   1 ora<sid>     dba             22 Mar 12  2004 lib -> /oracle/<sid>/920_64/lib
    drwxr-xr-x   3 ora<sid>     dba             96 Mar 12  2004 ocommon
    /oracle/client/92x_64/ietc:
    total 40
    -rwxr-xr-x   1 ora<sid>     dba          19961 Mar 12  2004 CROCLLNK
    /oracle/client/92x_64/ocommon:
    total 0
    drwxr-xr-x   3 ora<sid>     dba             96 Mar 12  2004 nls
    /oracle/client/92x_64/ocommon/nls:
    total 0
    drwxr-xr-x   2 ora<sid>     dba             96 Mar 12  2004 admin
    /oracle/client/92x_64/ocommon/nls/admin:
    total 0
    lrwxr-xr-x   1 ora<sid>     dba             41 Mar 12  2004 data -> /oracle/<sid>/920_64/ocommon/nls/admin/data
    <sid>adm> which brconnect
    /usr/sap/<SID>/SYS/exe/run/brconnect
    <sid>adm> pwd
    /sapmnt/<sid>/exe
    <sid>adm> ldd brconnect
            libnsl.1 =>     /usr/lib/pa20_64/libnsl.1
            libpthread.1 => /usr/lib/pa20_64/libpthread.1
            libm.2 =>       /usr/lib/pa20_64/libm.2
            Unable to find library 'libclntsh.sl.10.1'.
    Also it is not working even after adding oracle instant client path in SHLIB_PATH
    Regards,
    Vinod

  • Hi i have installed report generation tool kit but i am unable to find a function

    hi,
    I have installed report generation toolkit full version and i have few example programms in which a function named generate report get data to modify.vi been used but i am unable to find a function pallet called  Generate Report get data to modify.vi in my function list and when ever i try to RUN this example programm i get an error saying this function is not executable if i go inside that function again its showing the same error inside that function saying its not executable if any one knows about this VI pls help me
    regards
    narayan 

    hi,
    i have tried your method by going into
    resorces i have opened the VI s there its not showing any error but how
    to open same vi or call that VI  while i am programming how i can
    search those functions in my function  pallet and i have a previously
    written prog in LABVIEW 8 VERSION where he has used this functions and
    he has made some SUB VIS using those functions and some of the contents
    VI S of resorce he has put it in a folder so every time when i try to
    open this VI  it says dependncie issue it is trying to access the VI
    FROM RESORCE AS WELL HAS FROM THE FOLDER WHERE PREVIOUSLY STORED HOW TO
    SOLVE THIS PROBLE PLEASE HELP IF ANY ONE HAS SOLLUTION FOR THIS
    REGARDS
    NARAYAN

Maybe you are looking for

  • Invoking web service with HTTP authentication using OdiInvokeWebService

    I did all configurations in OdiInvokeWebService Advanced Editor. When I press "Invoke web service" there are no errors. But when I try to execute this step there is an error: java.lang.IllegalArgumentException: Bad password format. Make sure that it'

  • What happened to "Mail Link to This Page" in Safari 6.0 in Mountain Lion?

    I just loaded Mountain Lion onto my MacBook Pro. When I went to use Safari (6.0), I noticed that I can no longer find "Mail Link to This Page" under File. How do i mail a link now?

  • 24pA rev telecine grayed out

    Just bought a sony v1u and shot with the 24pA setting. i brought it into FCP with the 1080i60 Easy Setup. Dragged the source file into cinematools to get the reverse telecine and it is grayed out. When i tried a batch reverse telecine, it said someth

  • Xref with object number greater than trailer's size value

    Hello, a client sent to us a PDF with a strange xref table. Here is what it looks like: xref 0 55 %% standart xref entries 200001 5 0000052507 00000 n 0000052793 00000 n 0000053079 00000 n 0000053365 00000 n 0000053727 00000 n trailer << /Size 55 /Ro

  • Send Reminder using the Form Dates

    Hi all. I don't know what is the best way to send reminders (emails) checking the Form dates . For example: There is a task assign where the user enter 5 dates (date 1, date 2, date 2.... etc) Then, I need to send emails to "Xpath user" when the syst