Full C mem in N97 with hardly any in it which I in...

I have not yet solved the full memory problem in C memory. Today was really bad. I cannot even send any smses. I have only Quickoffice as an application. It does not work if it is transferred to Ememory.
Is phone memory only 72.9mB in Nokia 97? Or is it just my phone memory that is saying so? E memory and SD memory are almost empty.Images and downloaded apps such as timer, flash light etc are in E memory.
Yvehie

If you bought quick office and Adobe, you should have received an activation code, or registered your phone so would be able to reinstall and re-activate. Taking to a care point will not stop a reset removing software from C phone memory !!
The safest and most successful way to reset your phone is to backup Contacts, Calendar and Notes ONLY with Ovi suite or your Ovi Account , then as suggested , dial *#7370# followed by 12345 and then set up your phone manually. Install anything you can on E and don't install anything you don't really need on C.
The reset will give the maximum available memory on C, and as long as you have over 20meg left the N97 will work fine
I would also suggest installing a file manager like X-Plore Symbian and trying RamBlow to help with memory management.
A reset will take a couple of hours start to finish, nothing on E will be affected, and if you go to a cre centre the phone could be away for a few days/weeks and you would still have to reinstall your apps.
The reason for not doing a full backup and restore is that your current setup may be causing a problem and re-installing it would also re-install the problem !
Bite the bullet and give it a go, it won't kill the phone, would also re-install the firmware whilst you're at it as it can't do any harm. I've had an N97 for nearly 2yrs and have reset it on multiple occasions, including for every software update and to regain memory .
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Similar Messages

Is there any way to go back to a previous version? this one is not compatable with hardly any of the plugins i had/need.

i need this plug in in order to use features offered by dish network. everytime I go to the site it tells me i need a plug in in order to watch tv/movies online. it goes through the download process and then at the end tells me it couldn't download the plug in because it's not compatible with firefox 5.o. Why when you change something is it so dramatic that simple plug ins can't transfer with it? This version is not compatible with quite a few plug ins i had. if I can't find a way around this i'll have to look for a different browser which is disappointing because I really like firefox and don't like IE which leaves me with Chrome I guess.

First, you could try getting an updated Slingbox plugin from Slingbox: [http://support.slingbox.com/get/KB-5000309.html Sling Media Support - Firefox crashes after upgrading to version 5]. Does that work with Dish?
If that doesn't work, here's the process to roll back to 3.6:
First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, download and save Firefox 3.6 to your desktop for future installation. http://www.mozilla.com/firefox/all-older
Close Firefox 5.
You could install Firefox 3.6 over it (many have reported success) or you could uninstall Firefox first. If you uninstall, do not remove your personal data and settings, just the program.
Unless you have installed an incompatible add-on, Firefox 3.6 should pick up where you left off. If there are serious issues, please post back with details.
Note: I haven't actually tried this myself!

HT201364 Hello ! i have a question about my Hard's Disc storage space. I have Mac book Pro 11" Retina with hard disk 120 GB . I want to make this update but its impossible because of no free space. And now i want to ask. Its 120 GB full space but i dont k

Hello ! i have a question about my Hard's Disc storage space. I have Mac book Pro 11" Retina with hard disk 120 GB . I want to make this update but its impossible because of no free space. And now i want to ask. Its 120 GB full space but i dont know how. It tells me lets say i have 30 GB movies but i dont have anything ! Can you help me with any way ? If i can do something to see what movies let's say means !
Thank you !!

Hope this helps.
1. Empty Trash.
    http://support.apple.com/kb/PH10677
2. Start up in Safe Mode
    http://support.apple.com/kb/PH11212
3. Delete "Recovered Messages", if any.
    Hold the option key down and click "Go" menu in the Finder menu bar.
    Select "Library" from the dropdown.
    Library > Mail > V2 > Mailboxes
    Delete "Recovered Messages", if any.
    Empty Trash. Restart.
4. Repair Disk
    Steps 1 through 7
    http://support.apple.com/kb/PH5836
5. Disk space / Time Machine ?/ Local Snapshots
   http://support.apple.com/kb/ht4878
6. Re-index Macintosh HD
   System Preferences > Spotlight > Privacy
   http://support.apple.com/kb/ht2409
If this does not help, you have to buy an external HD and move your movies photos.etc to
the external HD.

MacBook will not start. I have restarted with original CD. I have used Utilities and "no problem" with hard drive. I have reset PRAM. I have tried safe boot. Nothing is work. Gray screen with Apple logo and rotating wheel. Thanks for any suggestions!

MacBook will not start. I have restarted with original CD. I have used Utilities and "no problem" with hard drive. I have reset PRAM. I have tried safe boot. Nothing is work. Gray screen with Apple logo and rotating wheel. Thanks for any suggestions!

Snow Leopard is a Mac OS X version. You say that it's the version you have in your Mac (10.6.8). Do a back up of your files, format the hard drive (using Disk Utility) and reinstall again

IPad lost it's "touch" you can't turn it on because you can't slide the slider. I did a simple reset, and then a full reinstall from iTunes - neither worked. Any ideas? We are a school so I can't even afford a "chat" with Apple. So thank you.

iPad lost it's "touch screen" you can't turn it on because you can't slide the slider. I did a simple reset, and then a full reinstall from iTunes - neither worked. Any ideas? We are a school so I can't even afford a "chat" with Apple. So thank your help.

Make an appointment at an Apple Store to have your device examined by a technician. That will cost nothing and you will then know what the problem is and what alternatives you have for a fix.

How long does the IPhone5c battery last for without hardly any usage with about 2/3 to 3/4 left?

How long does the IPhone5c battery last for without hardly any usage with about 2/3 to 3/4 left?
Has the side affect of charging, where the battery's life gradually decreases overall with each charge, been fixed ?

Eric,
They did say 12-14 hours, but as is always the case with such estimates, they invariably quote the 'best possible scenario' and almost never mirror 'real world' conditions.
If, from a fully charged position, you simply switch on your nano, and set it to continuously play through a long set of songs, with EQ off, backlight off, modest volume (50%) don't touch it during playback, then you might just get somewhere near this figure - and if you don't then it's either not been conditioned properly or it's faulty.
If you use it like me, daily for a couple of hours, with 2 secs backlight and switch songs regularly, using fairly high volumes then 6-8 hours is more likely. It'll even drain when it's not in use, even in sleep mode, albeit very slowly. They also tend to drain more quickly before they've been through their first few charge cycles (the conditioning period).
Personally I haven't got a problem with this though I can understand why some people have. It's not very impressive in this respect. Apple should be able to come up with something much better - maybe they should talk to Sony

Imovie is limited to its import formats and does not allow for storing video in any rawformat. Which means all videos will contain lossy compression applied to the video-.with no way to edit full format video. Is this statement true?

Imovie is limited to its import formats and does not allow for storing video in any rawformat. Which means all videos will contain lossy compression applied to the video….with no way to edit full format video. Is this statement true? Does iMovie support HD 1080p @ 60 fps?

Iggy826 wrote:
… Is this statement true?
yes and no!
using the intended Import from Camera routines, iM converts automatically in its very own AppleIntermediateCodec. so, answer is yes.
but …
a) Apple claims , aic is non-lossy intermediate codec. working with proRes in FCPX taught me, there are even less non-lossy-ness codecs
b) iM offers an Archive feature, which is basically a simple Finder/copy operation which 'clones' your SDcards content into some folder on your harddrive; e.g. you can later use these untouched 'raws' in another editor such as FCPX. so, answer is no.
c) when you 'override' the import routines by manually re-wrapping mts into a mov container, iM handles the 'native' h264s ... so, answer is no.
d) adding any effect, transition etc. reduces any interlaced source to 540p. (if you're working with 720p source, res is kept) … so, answer is yes. or, in 720p case, no.
< Johnny Depp's voice >… savvy?
Does iMovie support HD 1080p @ 60 fps?
via Import from Camera? No.
via re-wrapped mts>>mov? I was told yes, some say no.
one thing to be kept in mind when talking about these 'issues':
iM, this 12€, is meant as a CONSUMER toy tool.
it supports AVCHD vers1 (=no 1080/60p, no >24Mbps, no 3D).
fingers crossed, we'll see soon some iM/QT/FCPX update for support of AVCHD v2 ........
the main consumer devices are within the specs, iM supports.
using professional equipments makes usage of professional software (FCPX, AP) optional.
sorry for lengthy answer.

My MacPro says the startup disk is too full. I have 4 internal hard drives that have 2T each so there is plenty of space, but all start up programs, libraries, iTunes and application folder are on the '1st' hard drive. Can I move any to 2nd drive?

My MacPro says the startup disk is too full. I have 4 internal hard drives that have 2T each so there is plenty of space, but all start up programs, libraries, iTunes and application folder are on the '1st' hard drive. Can I move any to 2nd drive?

Your system will likely fit just fine on a small fast 250GB SSD
What you have is lots of stuff that should not be on the boot drive, data and graphics or media files and libraries that should be moved to another drive.
If you are getting a message like this, STOP, off load files, make room, and make sure to have 15% free or more.
Do not try to move anything from system and its library and sub folders. Move your home user account and just leave the essential home library but move all the rest.
A full drive can have trouble finding free space segments and writing out updates to files and to the directory. And loss of directory means loss of where files are located and their segments.

FYI: MS-7125 BIOS has problem with Hard Drives withNative Command Queuing (NCQ)

For those the have messed my two treads on which both ended up being cause by K8N Neo4 BIOS problem with HD's with NCQ.
Will wonders never cease? MSI Support finally conceded the BIOS has a problem with Hard Drives with NCQ and they have forwarded the problem to their programming department.
However, do not look for any results for above two weeks.
Roger

The problem that this thread has been trying to follow is the incapability of the nVidia RAID Controller with Serial ATA Type 2.5 drives. I know the threads has been hard to follow and part of that is because when I started the thread I had what appeared to be three totally un related problems, but all three were traced down the common problem of the incapability of RAID Controller with Serial ATA Type 2.5 drives.
The title of this thread is MS-7125 BIOS has problem with Hard Drives with Native Command Queuing(NCQ). The statement was true at the time it was written and has nothing to do with memory problems.
Sense the thread was started MSI has fixed the BIOS part of the problem, but we have sense learned the nVidia RAID Controller Command software and its driver has problems too. I have been working MSI Support, they have been using me to test pre-beta BIOS and Drivers soon. Of the testing I have done the pre-beta BIOS worked and the Pre-beta 32-bit driver works. I am assuming that the latest BIOS V1.B had as part of it included fixes was the needed fixes for working with the nVidia RAID Controller as I have test the pre-beta RAID Driver with BIOS Version V1.B as the Raid array function fine windows XP Pro 32-bit Edition. As I have had no communications with MSI support of over a week now I am hoping for a release of 32-bit and 64-bit RAID Drivers. But, nobody should get the hopes up, because through other backdoor sources nVidia is having a hell of a time. One reason for this I heard is that the nVidia RAID Controller is fully software, no hardware other than the electrical drive interfaces. Their problem started when they tried using the old 32-bit code Controller with new 64-bit hardware drivers and now they are having to totally rewrite the controller core in 64-bit code. But, knowing my source, it may all be fiction.
The RAID Array you say is up and running, are the drives full specification SATA 2.5 in other words do the both have 3Gb/s speed and NCQ. If you send me the full part numbers I will check the specifications a get back to you. Because if you have nVidia RAID 0 Array you working you will be the first to have done it and there about 230 people around the world that would like to know how you did it, even MSI, who's pre-beta nVidia RAID Drivers that will work with BIOS V1.B for 32-bit Windows only and nothing for Windows XP 64, would like to know.
Roger

My macbook pro's memory is full and I purchased an external hard drive. I am using timemachine, but need to earse/free up some memory on my laptop. How do I do this?

My macbook pro's memory is full and I purchased an external hard drive. I am using timemachine, but need to earse/free up some memory on my laptop. How do I do this?

Christinag1317 wrote:
My macbook pro's memory is full and I purchased an external hard drive. I am using timemachine, but need to earse/free up some memory on my laptop. How do I do this?
Ok when you refer to "memory" that is the Random Access Memory which is temporary memory the processor (worker) uses to store stuff while it's using it. Power goes off whats in the memory is gone.
Your storage drive is where data is pernamnetly stored if the power is on/off.
So what you really mean to say is your storage drive is filled up and you need to make some room.
You have a TimeMachine drive, what this does is makes a image of your internal storage drive as a backup method, it also allows some "back in time" restoration of your previous deleted files depending how much space is on that drive. The more space, the less data you have, the more days you can go back in time to retrieve something.
Unfortunatly the TimeMachine drive is not a extra space storage drive, it automatically rotates what appears on your internal storage drive. So if you delete something from the internal drive, it eventually gets deleted from the TimeMachine drive.
So you need to make some more room on your internal drive, this is rather easy, all you need is ANOTHER external drive and connect it to the Mac. Give it a name like ExtraStorage#1 and thenyou will have to decide which of your User files you really don't need on the internal drive.
For instance the best choice would be to move some movies out of your Movies folder to another MoviesExtra folder on the ExtraStorage#1 drive.
Movies take a LOT of drive space and you can always copy them on or off, or watch them from the ExtraStorage#1 drive as well. But if your going to do this a lot, you should consider getting a Firewire 800/400, USB 3,2,1 combination drive as Firewire 800 is fastest and decently priced (Thunderbolt is very high priced and overkill at this time)
The other things like Documents are quite small, Pictures can take a lot of space if you have a lot, but if you need them on the internal drive then that's better. Music one tends to use a lot or manage playlists and such, but perhaps some music you may which to move off or "prune", I suggest always burning data DVD's of music especially for extra backups.
Once you have freed some room on the internal drive, this liitle neat program will show you what is taking the largest amount of space on your internal drive.
http://grandperspectiv.sourceforge.net/
After a scan, right click on the big squares to "revel in Finder" to show you what's taking the largest amount of space, be warned it also opens up hidden system files and folders, which you won't be able to move. So concentrate on what's inthe Users folder.
Likely if you have a lot of Movies this is the biggest culprit on most standard internal hard drives. Also if you have something in iTunes that's auto-downloading something like PodCasts and not deleting the older ones and you forget. So go there and fix things and that can free up drive space.
If you bought a small SSD with your new Mac, then the price of that SSD has come back to haunt you with low storage space, you will have to think carefully what you can live without on the internal drive.
Once you have slimmed things down, TimeMachine will update to reflect your slimmer internal drive. What this means is there is only one copy of your data on the ExtraStorage#1 drive.
You need to maintain two copies of your data at all times on seperate hardware, so now you need ANOTHER storage drive (ExtraStorage#2) to copy everythinng of ExtraStorage#1, or else if you drop or have a mechanical problem with ES#1 all that data will be gone!
If you wish to learn more then I suggest reading these two links
https://discussions.apple.com/message/16276201#16276201
http://pondini.org/OSX/Home.html

I have iMac and need a good photo editing program to use. Reviews say aperture runs really slow with Lion, any suggestions?

I need a program where I can remove objects and touch up dead grass, etc.

Reviews say Aperture runs really slow with Lion, any suggestions?
To add on to Corky02 answer:
The recent Aperture release AP 3.3.x is very efficient, both on Lion and Mountain Lion. But you need a decent hardware to support it. The older Macs will have problems with the storage and CPU requirements. For good performance on large raw images plenty of RAM is important, at least 4GB, but 8GB would be much better, and your library should be on a fast disk, preferably on an internal drive. And don't let the system drive get too full.
Many reports about Aperture being slow are due to putting the Aperture library onto slow disks or acessing the original image files over the network, insufficient RAM, or corrupted or ill-designedAperture databases.
Aperture excels at all kinds of image processing that can be considered image developement - raw processing and color/lighting adjustments, but does not do compositing. If you are shooting raw and want professional image developement I'd recommend to do this in Aperture and not in iPhoto - you will have much more control over this in Aperture (after a steep learning curve). You can also repair and retouch the image to correct minor blamishes. For graphics compositing and inpainting you can set up an external editor and send your images from Aperture to this external editor - any of the editors Corky recommended would be o.k. for this.
To see, if you will want the advanced image processing in Aperture or the easy to use, more basic options in iPhoro will be sufficient to you have a look at the Aperture User manual, or the tutorial on the support page: Aperture Support
But Aperture is a professional apllication, not "plug and play". You should only consider it, if you are willing to spend some time on learning to use it properly and are willing to work your way through the manual.
Regards
Léonie

My phone has hardly any in call volume. What can I do?

Hi there. Can anyone help my phone has hardly any in call volume when turned up full. Is there anything I can do?

Hi Michaelcampbell1980,
I understand that you have run into an issue while updating your iPhone. Here is an article that will help you address this issue:
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
http://support.apple.com/en-us/HT201263
Thanks for coming to the Apple Support Communities!
Regards,
Braden

My z10 led flashing red when charging and even at battery full it blinks red. no green at any note..

My z10 led flashing red when charging and even at battery full it blinks red. no green at any notification. But at below 10% charging level it blinks with a combination of red and green. Please send me any settings to be changed if.. at full charged no green light is blinking.. how many colours does z10 led have..and when it works and how to make those settings..or was my led not working fine? I am worried so much..plz help me

Your LED is fine, on the Z10 there is not "network signal available" green LED, as you're accustomed to from the legacy devices. At reaching 10%, the LED will blink orange.
Red for message or applicaiton notifications.
if you want to edit and create specific LED color combination, see the third party apps such as BeBuzz or Hub++
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Full 138257 has overlapping selections with init.138246:No updates into DSO

Hi,
I am loading the data from Sourec to PSA and then into data targets in series. It is BW3.5 version info package.
I got the following issue while loading the data: "Full 138257 has overlapping selections with init.138246:No updates into CRFDS121 (Its a DSO)".
The request for Initialization got activated but when i doing Full load it is getting the above error.
Any one can please answer my question..
Thanks in advance,
Phani.

Hi Prashanth,
First I done the Init load without Data option and activated it. And then run the full load in another request and trying to activating....here it is giving that error message. (And one more thing is in that DSO, "Active Data Automatically" setting check box has Enabled. It means the DSO will be Activated automatically once the data got loaded into DSO.)
Do i need to delete the full request before running the Repqir full request?
Thanks,
Phani.

Safari status bar disappears. I have tried clicking on show status bar and it will only appear when I move the cursor to the top of the screen. I can not minimize the open page only full screen or close the browser. Any idea how the rectify this

Safari status bar disappears. I have tried clicking on show status bar, under the View tab and it will only appear when I move the cursor to the top of the screen. I can not minimize the open page, only full screen or close the browser. Any idea how the rectify this issue?

One enters and exits full-screen with control+command+F keys. This is on the View menu in Safari. Optionally, the green traffic light in your browser title bar, if you roll over it, has the full-screen control it it. While in full-screen mode with Safari, moving your mouse pointer virtually up, and off-screen reveals the Safari title bar again, and you can click the green traffic light to exit full-screen mode.
You can hide/show the status bar by simply typing command+/. This too, is on the Safari View menu. and in 10.10.1 — it works reliably for me.

Full C mem in N97 with hardly any in it which I in...

Similar Messages

Maybe you are looking for