Full data load for vendor line items 0FI_GL_4

Hi Experts,
i need to delete the data from the vendor line items cube and load all the historic data from r/3 production, so how do i proceed, i am assuming that there is no setup table concept for this since its FI, so how do i do this and what are the steps that needs to be done on r/3 side as well as BW?
Thanks,
shetty.

Its pretty simple in FI. There are no setup tables like LO extraction.
1. Double click ont he cube in BW and delete all the requests. make sure all of them are deleted. (or) you can right click on the cube and say "delete data".
2. As youa re working on production make sure ur requests and data are completely deleted. Check twice
3. Activate your master data.
4. replicate datasources and activate transfer structure in BW
5. Load data from BW
              I would think twice to delete data from a cube particularly in production. I don't know your situation but if I were u, I would create another cube copying the cube and then load all the R/3 data into the new one.
Good luck.

Similar Messages

  • 10 Years of Data to be loaded for GL Line items (0FI_GL_4)

    We want to load almost 10 years of GL line items data. What is the best approach in loading this ? The customer wants to see only open items. So can i restrict the load for document status only (Open) ?
    Any suggestions
    Thanks,
    Santosh

    make sure that customer wants open items in BI... it might be the case that customer wants open items only in report but they might need other items as well in BI.... if they want only open items in BI then you can put this filter... but what if that item is closed after it has been loaded to BI?
    also i think it would be better if you load data year by year.... that would take less time and in case of error... you can easily search it through one year data.....
    Regards,
    Sharayu

  • Which data sources Can i use for Vendor line items

    Dear Experts,
    I want to load the Vendor Line Items Data.In Rsa5 I found
    0fi_ap_3: Vendors: Line Items
    0fi_ap_4: Vendors: Line Items with Delta Extrcation
    0fi_ap_30: Vendor Line Items
    What is the differences of the 3 Datasources.
    Which Datasource  can i use.In my R/3 side they used EHP3.
    Could you please guide me what is the use of EHP3. What Cude and Dso can I use.
    Thanks in Advance.
    Regards,
    Srinivasan.

    Dear Kulakarni,
    I found few of my fields in 0FI_AP_4.I did n't find few fields can i enhance the Datasourse.
    What is the respective Cube for that  Datasourse.
    I check  0AP_30,but in Business Content that cube is not available.
    Could you please give me guidance.
    Thanks in Advance,
    Srinivasan.

  • SAP QUERY report for vendor line items

    Hi
    I have created a SAP QUERY report for vendor line items with fields vendor no.,vendor name,amount,company code and period.But there is one line item i donot know from wher system is getting it picked with is not in that vedor account,when i compare with fbl1n.I checked the document number too...the same doc number is twice in my query report.One with correct amount and another with wrong one.How do i chk.Where did i go wrong in creating query.I used logical database KDF.
    Please advise.

    i chked...how do we get the amount displayed in query...it just displays amount no debit credit symbol... i have selected BSEG-DMBTR field but no -/+ sign,how is it done in query,please suggest.

  • Can we make use of Transaction code FKMT  for vendor line items

    Hi
    Please advise me whether we can make use of Transaction code FKMT (Account assignment model) for vendor line items as follows:
    For Example:
    Expenditure Account      Dr.       Rs.1000
             To Vendor A                                      Rs.100
             To Vendor B                                      Rs.100
             To Vendor C                                      Rs.100
              To Vendor D                                      Rs.700
    Also please advise me what to give parameters
    Thanks and Best Regards
    Shekhar
    Edited by: Shekhar Yecham on Sep 19, 2008 7:05 AM
    Edited by: Shekhar Yecham on Sep 19, 2008 7:10 AM

    Dear Kulakarni,
    I found few of my fields in 0FI_AP_4.I did n't find few fields can i enhance the Datasourse.
    What is the respective Cube for that  Datasourse.
    I check  0AP_30,but in Business Content that cube is not available.
    Could you please give me guidance.
    Thanks in Advance,
    Srinivasan.

  • Legacy asset data upload for multiple line items

    Hello
    Legacy asset data upload for multiple line items- for example Building is an asset which is having different line items for purchasing of land,constructaion or renovation etc.........now to upload the legacy data what should be consider...only one line item for Building or numbers of line item.........
    which one is the proper way to do this exercise?
    regards

    Hi,
    It completely depends on clients requirement. but following are few approaches:
    1. Define Building as Asset Class.
    2. Create a Building at specific location at asset code and
    3. create asset sub numbers for other components.
    other approach would be:
    1. Define Building as Asset Class.
    2. Create a Building at specific location at asset code and
    3. create further asset codes for other components where field description will be used for relating each other.
    Regards,
    Sayujya

  • Automatic Business Area Derivation Rule for Vendor Line Item in MIRO

    Hello Experts,
    We trying to use Business Area concept for our client.
    I have completed all configuration setting for the business are derivation like
    1. Creation of Business Area
    2. Assign Business area to Plant / Division (OMJ7)
    3. Business area determination from sales area (TVTA)
    4. Business Area by Sales Area
    5. Checked Field Status Group for Customer and Vendor Reconciliation Account
    It is working for for compelete sales process and in Procurement cylce it is picking business for MIGO transaction both the line items.
    But
    In MIRO (Purchase invoice posting) it is automatically taking Business area to the GR/IR line item and it not taking Business area for the vendor line item (automatically)
    I comes know that there is a business area derivation rule for this to happen automatically.
    Can you please propose the soulution for the automatic derivation of business in MIRO for vendor line item.
    Regards,
    Chalapathi

    Hi,
    I do mot think there is a BA derivation rule for MIRO.
    The best you can do is:
    1.  Use a user exit or enhancement point for deriving the BA from the GR/IR line and populate that in the vendor line
    or
    2.  You make BA as a mandatory field in the field status group for the vendor reconciliation account.  This will then force the user update the BA.  We use this option.  This is so because at times, the vendor item may need a different business area than the GR/IR line.
    Cheers.

  • T.code required for Vendor line item display and Customer line item display

    Hi Gurus,
    Pl provide me transaction code for "Vendor line item display and " Customer line item display apart from FBL1n for vendor and FBL5n for customers.
    Kindly advise.
    Regards,
    Samar

    Hi,
    You could use these, for example:
    S_ALR_87012103 - List of Vendor Line Items
    S_ALR_87012197 - List of Customer Line Items
    Just curious: what's wrong with FBL1(5)N?
    Regards,
    Eli

  • Advance ajdustment for Vendor line items through F110

    Hello
    We have to make advance ajustment through F110 for the Vendor line items .  Advance is posted with special indicators through F-48 and invoice booked through FB60 and MIRO.
    I have checked the configuration in FBZP "All Company Codes" where special indicators is assigned.  Still advance is not getting adjusted.
    Please help me to resolve this issue.
    Regards,

    Hello Prashant,
    Check F110 Addtional log tab > Due date check box  & also check F110 > Parameter > Next payment date it should be more that what you expecting due date selection
    Rgds
    Suma

  • To Insert Header Field for  Vendor Line Item Display FBL1N

    Hai All,
    I got a requirement that i have to add a Header item in the standard Tcode FBL1N. The client requirement is to add the Balance Carry Forward Amount Field in the Header level of the Output display.
    I have inserted the Header Text in the output display by going through Settings =>Layout => Current Header Rows but iam not able to pass a variable to that pertaining output text.
    Pls provide me the solution regarding ....

    Please note that most vendor line items wont have a PC assigned to them.
    I am not sure if you are refering to classic view or new GL data.
    Anyway you can use the sum button, and sub total for your levels.
    If you want to get the information sub totalled by PC, then I guess you are using the new GL and document splitting.
    If that is the case you cannot use FBL1N for this.
    There is however a set of reports in Accounts Payable, called new Gl reports and they will provide you the general ledger view and not the entry level view, and you can use the sum and sub total option.
    Please award points if this is useful.
    Come back if you need further help.

  • Business Area for Vendor Line Items during Payroll Posting

    Dear All
    We are in ECC 6 version of SAP. We are using Business Area for Internal Financial Statement. We are facing a problem with regard to Business area in Payroll posting. Business area does not appear in vendor line items when we make posting of payroll for multiple business area. We have setting technical accounts for HR. We read SAP note 203276 and it seems that it is possible. Can someone tell us what is the reason that business area not coming in vendor line item while payroll posting.

    Hi
    That part we have already done. The problem only come when we run payroll and there are vendors belonging to several business area in that case system keep the business area field blank. In case if we set field status required system give error. That is why we run payroll by each business area we also have maintained technical account for 1001.
    Regards

  • Report in R/3 for vendor line item details

    Dear friends,
    Please provide direction on how we can run a report (SAP R3 or BW) that provides the vendor name/and number for all A/P transactions (both via purchase orders and direct pay) by G/L account?.
    Is it possible in SAP R/3 or do we need to develop a new report in BW?
    Please respond asap.
    Thanks in Advance....
    Rgds,
    Kunal Vichare.

    Hi
    With T code  F.41- List of vendor line items you can get with Vendor No. and Vendor Name  , with  small layout changes.
    If it is not sufficient according to your requirement go for BI it will come very nice dash board report.
    Rgds
    Vani

  • Profir Center Update for Vendor Line Item

    Hi,
    While entering an inter company document, cost center is required field for the expense line item. The system is picking up the profit center based on the cost center. However, while saving the document I  am getting a error message that you can not post to profit center XX in company code 2. The profit center is only assigned to company code 1 (KE52) and it is not to be assigned to company code 2. Ideally the vendor line item should be assigned to dummy profit center maintained in config but system is picking the profit center assigned to expense line item. The following entery is being passed and the document type is AB. Document Splitting is active.
    Expenses A/c. Dr - company code 1 - PC - XX
    To Vendor            - company code 2
    can anyone help me with the same?

    Hi,
    Validations are in 3 steps (Mostly Inter-company transaction fetch this validation in sequence)
    1) Derivation Rule
    2) Default   
    3) Dummy
    Option 1:
    T-code: 3KEI
    setup default profit centre by company code and GL Account
    if above does not resolve your issue then also setup option 2
    Option 2:
    Create substitution rule on document completion level
    If G/L account is (B/S) XXXXXX u2013 XXXXXX and company code is 2
       then PC = 2
    End if
    try first in test system
    regards,
    Prashant Rane

  • Report for Vendor line item with GL line item text

    Hello SDN,
    We need to add the GL Line item text to a vendor line item report. I don't think adding a GL field is available option in the FBL1N report. Is there a way to display the Vendor name, Vendor number, Open amount and the GL line item text in a report without ABAP invovlement?
    I would really appreciate your help. Thank you.
    Edited by: nsap_fico on Aug 10, 2011 6:29 PM

    Some alternative is in KSB1 (Cost center line item report) - you can change the layout and include offsetting account and its text.
    But, in vendor line item report, if you want vendor number, vendor number, GL account number (offsetting) account and its text, then you should go with abap development.
    Have a look at the following note, if really serves your purpose.
    Note 1504612 - Line items: Offsetting account info (BAdI FI_ITEMS_CH_DATA)

  • Due Date Indicator on vendor line item

    Hi,
    We have raised a credit memo via logistics invoice verification.
    The baseline date is 21/10/2008 and the payment term is 31
    days from month end. That makes the credit memo due in 40 days time. However on the vendor open item list (FBL1N) the due date indicator is set to "DUE". This should be set as "NOT DUE". The payment run (F110) is picking up this line item in the payment run, when infact it should not do so.
    Please help.
    Many Thanks
    Pops Balram
    Toyota SA

    The first answer is the general rule: the due date of a credit memo is the baseline date.
    There are 2 exceptions: if you put the number of an invoice in the field BSEG-REBZG (Number of the Invoice the Transaction Belongs to), the due date of the credit memo is the due date of the invoice.
    2nd exception: if you put the constant 'V' in this field REBZG (you can do it thru a substitution rule), the due date will be calculated the same way as for an invoice.
    You can see this in the documentation of the data element REBZG:
    A special rule applies to credit memos which have a "V" in this field.
    The due date is determined in the same way as for an invoice. If the field is empty (containing neither a document number nor a "V") the due date is the baseline date for payment.

Maybe you are looking for