Full db export.... tablespace not created..

I have taken full DB export of 8.1.7.0.0 with SYSTEM user.. and imported in Oracle10g 2.
When I check the tablespaces in 10g not all the tablespaces are imported/created in Oracle 10g, but all the users are created in Oracle 10g.
Can any body tell me why?

just drop and delete the schemas.or you can export again after changing the directory tree but one moment you export in 10g with impdb the directory tree will be used only in case you use the datapump utility and i think you must use the regular 10g imp command not impd because you are importing from 8i and exporting in 10g .
Kind regards
Mohamed

Similar Messages

Expense Report Export does not create Invoice in AP

Hello,
I have created several expense reports in AP (Running EBS R12, I am not using iExpenses), but when I use the Expense Report Export request, the invoices are not created. I have looked online and found some plausible solutions. None of them have worked: I've made sure the Employee payment method is set up; the Usage rules for payables are also set up for Employee Expenses in the payment processing transaction type. In the Payables Option screen, I have selected the Automatic Employee as a Supplier option.
Here's the Expense Report Export log:
Payables: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
APXEXPER module: Expense Report Export
Current system time is 29-APR-2013 11:09:53
**Starts**29-APR-2013 11:09:54
**Ends**29-APR-2013 11:09:55
Start of log messages from FND_FILE
Begin Receipts Management - Holds
Process Hold Each Scenario
Determine whether to place Holds
Process Hold All Scenario
Determine whether to place Holds
Process Hold BothPay Scenario
Determine whether to place Holds
Process Obsolete Holds
Obsolete Holds
Obsolete Both Pay Holds
Begin Processing Individual expense reports
Fetching expense report...
Expense Report Number : **110**
Transfer Attachments option(Y/N):Y
Fetching expense report...
Expense Report Number : **REEMBOLSO 25ABR2013**
Transfer Attachments option(Y/N):Y
Fetching expense report...
Expense Report Number : **TEST_ASTRID_EXPENSE**
Transfer Attachments option(Y/N):Y
Fetching expense report...
Expense Report Number : **TEST_EXPENSE_AGSV**
Transfer Attachments option(Y/N):Y
Fetching expense report...
Expense Report Number : **101**
Transfer Attachments option(Y/N):Y
Fetching expense report...
Credit Card Expenses Fetched = 0
Credit Card Invoices Created = 0
Call Payables Open Interface
Expenses Fetched = 5
Invoices Created = 0
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PRINT   -------------
Printing output file.
Request ID : 4105067
Number of copies : 0
Printer : noprint
Finished executing request completion options.
Concurrent request completed successfully
Current system time is 29-APR-2013 11:09:55
What else do I need to do? Am I missing something?
Thanks in advance,
Astrid

I found the answer and I am posting it here in case someone else needs it:
You need to run the Expense Report Export with the Debug Switch on (you can find this under the request's parameters). When the output is ready, just select "View Log..." and search for the "REJECT CODE"; it will let you know what went wrong with your expense report. In my case, the suppliers I was using had invalid liability accounts. As soon as I updated them, the invoices were generated.
Regards,
Astrid

Full Load DTP is not creating outbound file where there is no data in DSO.

Hi folks!
We have created a Open Hub Destination on one DSO. That DSO is having 10 millions data.
We have created a Full updated DTP to create a file with some selections. In DSO there is not data with that selections.
I like to know, wether the file is created when ther is no data or not for Full update DTP. For Delta update is creating file even though there is no data as per the selections.
Pelase clarify me ASAP.
Thanks in advance
Peter

Hi Peter,
Please check the DTP Selections. if there is no data with these selections then you will get a blank.
as per Open hub destination it will create 2 files one is infobject list file where all the infoobjects like char's and key figure list is maintained.
then another file with the data of the infoobject with DTP selections.
Check for the selections in DTP.
With Regards,
Ravi Kanth

I can not create link within common foldesr

Hello,
i am trying to make some links from my KM folder within common folder and i get the error
The item could not be created because an exception occurred in the framework
I have full permission in this folder even with the administrator user can't do this
can anybody help me??
thanks in advance
Regards

Hi all,
also I've the same issue with the Administrator account. This is the log of the exception.
Full Message Text
Could not create new resource with id <Convenzioni Noleggio Auto> com.sapportals.wcm.repository.NotSupportedException
at com.sapportals.wcm.repository.ResourceException.fillInStackTrace(ResourceException.java:399)
at java.lang.Throwable.<init>(Throwable.java:180)
at java.lang.Exception.<init>(Exception.java:29)
at com.sapportals.wcm.WcmException.<init>(WcmException.java:40)
at com.sapportals.wcm.util.content.ContentException.<init>(ContentException.java:30)
at com.sapportals.wcm.repository.ResourceException.<init>(ResourceException.java:69)
at com.sapportals.wcm.repository.NotSupportedException.<init>(NotSupportedException.java:32)
at com.sapportals.wcm.repository.manager.ice.ICEGlobalOfferEntry.createLink(ICEGlobalOfferEntry.java:233)
at com.sapportals.wcm.repository.manager.ice.ICENamespaceManager.createLink(ICENamespaceManager.java:215)
at com.sapportals.wcm.repository.CollectionImpl.internalCreateLink(CollectionImpl.java:1583)
at com.sapportals.wcm.repository.CollectionImpl.createLink(CollectionImpl.java:915)
at com.sapportals.wcm.repository.CollectionImpl.createLink(CollectionImpl.java:828)
at com.sapportals.wcm.rfadapter.ResourceCreator.createWithProperties(ResourceCreator.java:116)
at com.sapportals.wcm.rfadapter.ResourceCreator.createWithoutProperties(ResourceCreator.java:125)
at com.sapportals.wcm.rfadapter.ResourceCreator.create(ResourceCreator.java:86)
at com.sapportals.wcm.control.edit.LinkControlStatus.save(LinkControlStatus.java:190)
at com.sapportals.wcm.control.edit.LinkControlStatus.doExecute(LinkControlStatus.java:244)
at com.sapportals.wcm.control.fields.CSSControl.onClick(CSSControl.java:58)
at com.sapportals.wcm.control.edit.InternalLinkControl2.onClick(InternalLinkControl2.java:214)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sapportals.wdf.stack.Control.dispatchHtmlbEvent(Control.java:386)
at com.sapportals.wdf.WdfEventDispatcher.dispatch(WdfEventDispatcher.java:176)
at com.sapportals.wdf.WdfCompositeController.onWdfEvent(WdfCompositeController.java:539)
at sun.reflect.GeneratedMethodAccessor632.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sapportals.htmlb.page.DynPage.doProcessCompositeEvent(DynPage.java:204)
at com.sapportals.htmlb.page.DynPage.doProcessCurrentEvent(DynPage.java:142)
at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:115)
at com.sapportals.portal.htmlb.page.PageProcessorComponent.doContent(PageProcessorComponent.java:134)
at com.sapportals.wcm.portal.component.base.ControllerComponent.doContent(ControllerComponent.java:77)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Can anyone help me please?
Thanks,
GB
Edited by: Gianluca Barile on Jun 9, 2009 11:22 AM

TS2167 i'm getting an error message.. can't create the file "header.jpg." The disk may be damaged or full, or you may not have suuficient access priveleges.

I need to publish to a local folder on my desk top and I am getting this error message.
can’t create the file “header.jpg.” The disk may be damaged or full, or you may not have suuficient access priveleges.
Please help... I need to copy to a disk... it was working fine until I attached a big project, I tried to delete the project, but still not workng.

Try the following:
1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iWeb's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iWeb folder (Snow Leopard and Earlier).
3 - launch iWeb and try again.
NOTE: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
OT

Posting Document not created (export data missing)

We are working on ECC 6.0 and during creation of Cancellation Billing document type IVS for the Intercompany billing, the document did not create Accounting document giving the Posting status as G - Posting document not created (export data missing). However checked the Foreign trade data and the system states that Foreign trade is complete.
Can any one suggest the solution for this?
Thanks.

Hello Mohammad,
About this issue, the incompletion of this cancellation document
arises might because the reference delivery has been archived/deleted.
This is likely due to your current copy control settings (VTFL).
If you have set ' ', in the export determination field this means that
there is a common 'exnum' key between the delivery and billing documents
LIKP-EXNUM & VBRK-EXNUM are the same.
The result of deleting the delivery is that you also delete the FT data
for the delivery, Because the billing document and delivery share the
same foreign trade table entries, you have in effect deleted the FT data
of the billing document too. This would most likely go unnoticed but if
you then cancel the invoice the system has no FT to copy into the new
cancellation billing document, which leads to this issue.
Firstly you should set the export determination flag in the copy control
of the delivery & billing documents. This will avoid this issue in the
future. Set it to to 'A' or 'B' depending on your requirements.
For the incomplete cancellation billing document, you could use userexit to
set it as complete:
You can use transaction CMOD.
Create a project for example FT project button create short text: ....
drop button Enhancement assignment & save use for example local object.
Use the F4-help for Enhancement and look for V50EPROP.
Drop button Components:
here you will find EXIT_SAPLV50E_005 and EXIT_SAPLV50E_006
In the userexits doubleclick on the includes ZXV50U05 and ZXV50U06
The coding in the userexits should be: C_COMPLETE = 'X'.
Afterwards activate generate ... and save.
The development class is VEI.
Please also check note 118573 which explains the FT user exits.
Regards,
Alex

I have a problem. When exporting from PDF to PPTX error "unable to process the document in the module Save As file is not created." What to do?

I have a problem. When exporting from PDF to PPTX error "unable to process the document in the module Save As file is not created." What to do?
Windows 7 64
PC

everything works on a laptop (

Oracle 11gR2 Partition tables not creating in default user tablespace

Hi all:
Not sure if i'm missing something or overlooked but when i create a partition table in a user schema, it is not creating in the schema's default tablespace instead creating with no assigned to any and using SYSTEM tablesspace.
create user dgp identified by dgp default tablespace dgp temporary tablespace temp;
grant connect, resource to dgp;select USERNAME,DEFAULT_TABLESPACE from dba_users where username ='DGP';
USERNAME DEFAULT_TABLESPACE
DGP DG
select table_name, tablespace_name, partitioned from all_tables where owner='DGP';
TABLE_NAME TABLESPACE_NAME PAR
AUDITLOG_P2 DG NO
AUDITLOG_P YES
This is the partition script i used --i also gave the tablespace name:
CREATE TABLE dgp.AUDITLOG_P(
entry_time DATE,
username VARCHAR2(14),
groupname VARCHAR2(100),
ip VARCHAR2(15),
command VARCHAR2(15),
directory VARCHAR2(300)
PARTITION BY RANGE (entry_time)
partition P_PAST VALUES LESS THAN (TO_DATE('2010-01-01','YYYY-MM-DD')),
tablespace DG;
============
What is it i'm missing? Anything different with Oracle 11gR2 on the partition creations?
Thanks for your help..
Regards,
Ash

Yes, i tried using the schema login adn creating the table as well as system with schemaname prefix....
this is what i get from the below
SQL> select def_tablespace_name from dba_part_tables where table_name ='AUDITLOG_P';
DEF_TABLESPACE_NAME
DG
SQL> select partition_name, tablespace_name from dba_tab_partitions where table_name='AUDITLOG_P';
PARTITION_NAME TABLESPACE_NAME
P_PAST DG
P_20100101 DG
P_20100102 DG
P_20100103 DG
P_20100104 DG
P_20100105 DG
P_20100106 DG
P_20100107 DG
P_20100108 DG
P_20100109 DG
P_20100110 DG
P_20100111 DG
P_20100112 DG
P_20100113 DG
P_20100114 DG
P_20100115 DG
P_20100116 DG
P_20100117 DG
P_20100118 DG
P_20100119 DG
P_20100120 DG
P_20100121 DG
P_20100122 DG
P_20100123 DG
P_20100124 DG
P_20100125 DG
P_20100126 DG
P_20100127 DG
P_20100128 DG
P_20100129 DG
P_FUTURE DG
31 rows selected.

I received this message on iWeb: Can't create the file "Mod_footer_bg.jpg." The disk may be damaged or full, or you may not have sufficient access privileges.

I made some changes to my iWeb site, and when I try to publish it, I get the error message: Can’t create the file “Mod_footer_bg.jpg.” The disk may be damaged or full, or you may not have sufficient access privileges.
What do I do now?

Try the troubleshooting steps under "Fix iWeb" here...
http://www.iwebformusicians.com/iWeb/iWeb-Tips.htm

Iweb - when I ask to publish my site ( using ftp) I am suddenly receiving this errorCan't create the file "logo.jpg." The disk may be damaged or full, or you may not have sufficient access privileges. Any ideas please

Can’t create the file “logo.jpg.” The disk may be damaged or full, or you may not have sufficient access privileges.

How much free space do you have on your hard drive? What system and iWeb versions do you have?
Try the following:
1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iWeb's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iWeb folder (Snow Leopard and Earlier).
3 - launch iWeb and try again.
NOTE: In Lion and later the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
If you're running Mavericks or Yosemite go to your Home folder and use the View ➙ Show View Options menu to bring the this window:

My iWeb Account wont update it says Can't create the file "mwmac_white.png." The disk may be damaged or full, or you may not have sufficient access privileges... This has never happend I deleted other sources on website and still wont work? Suggestions?

My iWeb Account wont update it says Can’t create the file “mwmac_white.png.” The disk may be damaged or full, or you may not have sufficient access privileges... This has never happend I deleted other sources on website and still wont work? Suggestions?

Welcome to Apple Support Communities.
This is the image contained in the file causing the problem...
I certain the original is contained in the Combo updates and on the OS disks.
As a temporary fix, click on the image above to open it.
Use Screen capture (Shift+Command+4) and click on the opposite corners of the image.
It will be saved as a Screen shot 2011-mm-dd at hh:mm.png
Right click on the filename in Finder and rename it to mwmac_white.png
I'm not certain, but the file might need to be moved into the Documents directory in the Subdirectory named for the website name you are editing. That's where it is on my system, but I moved a bunch of files when I restored from Time Machine about 18 months ago.
I also have many copies of mwmac.png, a separate copy one for each web page where the image appears in my website.

Receiving this message"Can't create the file "highlighter_welcome_header.jpg." The disk may be damaged or full, or you may not have sufficient access privileges." I have enough storage how do I find the problem?

Can’t create the file “highlighter_welcome_header.jpg.” The disk may be damaged or full, or you may not have sufficient access privileges.
How do I find the problem? Disk is not full.

Try the following:
delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
Click to view full size
launch iWeb and try again.
If that doesn't help continue with:
move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
launch iWeb, create a new test site, save the new domain file and close iWeb.
go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
move your original domain file from the Desktop to the iWeb folder.
launch iWeb and try again.
OT

Can't create the file "images/Dawings_By_Student_files/rss.xml." The disk may be damaged or full, or you may not have sufficient access privileges.

I added two drawings to the web site I was working on in iweb..then tried to publish the changes and it gives me this "Can’t create the file “images/Dawings_By_Student_files/rss.xml.” The disk may be damaged or full, or you may not have sufficient access privileges." Help I have no idea what to do.

Try the troubleshooting steps under "Fix iWeb" here...
http://www.iwebformusicians.com/iWeb/iWeb-Tips.html

Can't create the file "shapeimage_10.png." The disk may be damaged or full, or you may not have sufficient access privileges.

Can’t create the file “shapeimage_10.png.” The disk may be damaged or full, or you may not have sufficient access privileges.

Try the following:
1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete the contents of the User/Home/Library/Caches/com.apple.iWeb folder
3 - launch iWeb and try again.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
If you're running Mavericks or Yosemite go to your Home folder and use the View ➙ Show View Options menu to bring the this window:

Can't create the file "shapeimage_2.png." The disk may be damaged or full, or you may not have sufficient access privileges.

Publishing error: Can’t create the file “shapeimage_2.png.” The disk may be damaged or full, or you may not have sufficient access privileges.
found 2 images in spotlight, unlocked them, still won't publish. I didn't even use these images on the site I'm trying to publish. Help!

Try the troubleshooting steps under "Fix iWeb" here...
http://www.iwebformusicians.com/iWeb/iWeb-Tips.html

Full db export.... tablespace not created..

Similar Messages

Maybe you are looking for