Full Function GPS

I'm looking for a full function GPS, not just google or BB maps, for my Z30. Something that displays functions like ground speed, direction, traffic, speed zones etc. Is there such an app for the Z30?
Thanks,
Mark.

Hi and Welcome to the Community!
There are many....each with different things to satisfy different audiences. I recommend you try them all out so as to determine the one that best meets your specific needs.
For me, Waze is the best . It doesn't have speed zones (that's a very tricky thing for any app to provide), but it does provide the rest of what you ask for, and is based on true "crowd sourcing" from other Waze users. It has gotten me around quite a number of issues that I otherwise would have been stuck in.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • HP Envy 5532 Printer - unable to install a driver with full functionality

    Hi we have purchased a HP Envy 5532 all-in-one and were advised (and as stated on the packaging) that it will print 2 sided automatically.
    So far we have followed the instructions on various sites but we do not appear to have the option in the printer's Preferences  to be able to select 2 sided printing from the drop down list on the layout screen as there is no drop down list in there to select from as illustrated in the screen grab below:
    The options to the left of the screen grab allow me to select a manual 2 sided option where it will prompt us to reload the paper manually but no automatic options?
    Our operating system is: Windows 8.1 Pro 64-bit and we have been on www.hp.com and downloaded the appropriate driverfor this environment.
    The driver currently installed is: HP Envy 5530 Series Class Driver - the driver would not install off the disk which came with the printer so this was the recommended official download via the HP website
    We have run the HP Print and Scan Doctor supplied on HP Connected it found issues with the driver "the Driver does not have full functions installed" and attempted to download a fully featured driver - this has failed again and again.... to load
    We then downloaded and ran the "HP Installation failure unknown device" application and followed this to the letter 5 times!!! all this did was to stop the printer working at all. It ran until the install stage and then it keeps coming up unable to install on network - the printer is there on our network with an IP address???
    We disabled all Firewalls and ran the install without any start up items running via misconfig options as directed but still it fails at the same point on installation.
    We had to uninstall all HP drivers and let the PC "add a printer" via the Control Panel options which it has and we are able to print again but we do not have full functionality as we still can not print automatic 2 sided copies and when we run HP Print and Scan Doctor it still recognises that we do not have full functionality!!!
    Any help would be appreciated
    Thanks  Steve

    @Steve_Reeder, welcome to the Community
    I read through your post about how you do not have access to the full software and options for your Envy 5532, as the Full Feature driver is not installing successfully on your Windows 8.1 system. I saw that you have tried various troubleshooting steps, such as a Clean Boot (msconfig), the Print and Scan Doctor, etc.
    I will do my best to make some helpful suggestions to you to try out.
    It seems as though you are trying to install on your network, could you possibly try installing the printer as a USB connection, and afterwards converting the USB connection to wireless through the HP software (applies to wireless connection and not ethernet)? If you're installing ethernet, skip this suggestion.
    You could also try installing the printer under a Clean Boot (msconfig) and turn off your firewall, under a new user account with Admin Privileges, to see if that will work.
    Another idea would be to run the System File Checker to see if this scan will pick up any issues:
    Using System File Checker to Restore System Files
    Please let me know your findings thus far, and if you notice any error messages or codes, let me know all of the details.
    I hope to hear from you, enjoy your Wednesday
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • I erroneously deleted some background icons, that now have left me with only thumbnail images, what appears when I want to enlarge is a grey circle containing a black exclamation symbol, how can I get back full function and undo my mistake

    I have erroneoulsy deleted icons repetious images from the computer which then affected my iphoto images, leaving me in some cases only with the thembnail image.   When I try to enlarge or perform any other function all that appears is a black field containing a grey circle with a black exclamation symbol( !)
    within it.  How to I get back full function of these affected images and undo my goof up.   I have tried restore, but my attempts have not proved successful. 
    Help !!!
    silvercoho

    What exactly did you do to delete these?
    How did you try to "restore" and what did you try to restore?
    Probably the only solution is to restore your backup of the iPhoto library  from before you did this
    LN

  • I am using Windows 7 64-bit on a partitioned hard drive on a MacAir.  The trackpad will only work with a click.  How do I get the full function of tap and scroll?

    I am using Windows 7, 64-bit on a partitioned hard drive on a  2012 MacAir.  The trackpad only works with clicking.  How do I get the full function of tap and scroll? (I have this on a 2011 Mac Pro with 32 bit Windows 7 and it works properly.)

    Windows Control Panel>Boot Camp Control Panel>Trackpad.

  • Error message after clicked the SRM "Full Functionality" tab

    Hi, SRM gurus,
    After I logon to SRM and clicked on the "Full Functionality" tab, I immediately got the following error message.
    Short Text of the Message: Object type SCH is not supported
    URL: http://augustus.corp.bcm.tmc.edu:1080/sap/bc/webdynpro/sapsrm/wda_l_fpm_oif/
    Path: /sap/bc/webdynpro/sapsrm/wda_l_fpm_oif/
    Message ID: BS 
    Message Type: E
    Message No.: 018
    Message Variable 1: SCH
    Message Variable 2: 
    Message Variable 3: 
    Message Variable 4: 
    Error Code: 560
    Error Text: ERROR_MESSAGE_STATE
    Runtime Error: Object type SCH is not supported
    ABAP Call Stack: Method:  CREATE_SC_INT of program /SAPSRM/CL_PDO_FACTORY_SC_ADV=CP
    Method:  CREATE_NEW_INSTANCE of program /SAPSRM/CL_PDO_FACTORY_SC_ADV=CP
    Method:  CONSTRUCTOR of program /SAPSRM/CL_CH_WD_BOM_SC=======CP 
    I had no problem at other tabs like "Order Status", "Advance Search".
    Where should I look to resolve the issue?
    Thanks in advance!
    Best regards,
    Fisher Li

    ...SRM and clicked on the "Full Functionality" tab...
    I have never seen this tab. Is it a custom tab? In any case, by looking at your error message, I suspect somewhere in your iView definition, the object type is mistaken.  Instead of "SCH", it most likely should be "SHC", which is the default process type for shopping cart.

  • How to get Lightroom with full function CC subscription while could not see Lightroom in CC desktop?

    I bought a full function CC subscription early this month. Based on what is showing in on line store product description page I should get free Lightroom as well. However, I did not see Lightroom in the app dowload-able list. I had already bought Lightroom 4 and is using it. My main system I installed CC is Mac Pro 4-core Xeon with OS 10.7, 6GB DIMM & 1T HDD.

    Jeff,
    I did down loaded LR 5 from Adobe CC where is the only location I can down load Adobe app by following instructions from Adobe online store before I bought CC full function subscription. Then I un-installed it by deleting it while I saw it was not showed in my CC desktop after I bought full function subscription and installed CC. I understood the correct way to uninstall Adobe SW is by uninstaller. However, I could not find uninstaller from folder you mentioned or anywhere else (even now, I still can not locate to /application/utilities/Adobe installer, no Adobe installer can be seen in the location you mentioned. I just can find an Installers folder in resource/application support/adobe or application/tool/adobe installers instead, but I could not find any message directly related to Lightroom in Installers but Photoshop from CS3 till  Photoshop cc & of course Create Cloud installer) for uninstalling Lightroom 5 then, so I just can simply remove it by delete it. I had ever thought I may have to remove all versions of Lightroom I bought from Adobe in order to let CC to re-allocate Lightroom to CC desktop app list. I finally did not delete all versions of Lightroom for I am currently using Lightroom 4 for developing photos I took in past few weeks including in the wedding of my daughter. I can not sure if I can install Lightroom 4 back after uninstalled it. I should not take this risk so I did not delete Lightroom 2-4 after I deleted Lightroom 5.
    從 Fred 的 iPad 傳送
    "Jeff A Wright" <[email protected]> 於 2013/8/20 上午12:39 寫道：
    <Removed by Moderator>

  • Does the trial version of Lightroom have the full functionality as the paid version

    Does the trial version of Lightroom have the full functionality as the paid version please

    Yes, it has. if you have specific issues, simply explain them.
    Mylenium

  • Does Unlocked iPhone 4S Have Full Functionality ?

    If I purchase anFactory Unlocked iPhone 4S, will it have full functionality (i.e. Siri, iTunes, FaceTime, Apps) even if I do not activate it with a cell carrier?

    Yes. You will have to connect it to a WiFi network to get all the Data Functions.

  • Trial version not full functioning?

    To ry out some features, I follwed the tutorial video for using the healing brush to remove objects from a photo - in my case two people from a group photo. I selected "Expert", then the spot healing brush, brush size 20px. Content-Aware was selected. But when I tried to paint the objects to be removed, it did not work. All I got was a + and not the paint brush. Is the trial version not a full functioning program?

    The trial version is the same as the purchased version.
    Have you tried content aware move?
    It's the tool bottom left in the tools pallet in expert mode.

  • 3702 Support full functionality in Autonomous Mode

    Does the 3702 , 2702 and 1702 support full functionality in Autonomous mode?  i know there was a limited Site Survey function but wondering if they have added full function for these APs?

    Yes it does and also check the table below , both firmware are shown LAP and Autonomous for supported APs including 3700 series. 

  • When will Siri have full functionality in New Zealand?

    When will Siri be able to have full functionality in New Zealand, for example when I ask to take me home, it is unable to comply.. Same goes for providing local sports results etc.

    I'm not sure I follow. The UK description page for iCloud backup says "iCloud backs up your purchased music, films, TV programmes, apps and books".
    http://www.apple.com/uk/icloud/features/#backup
    Are you saying that it doesn't work for you?

  • Iweb it sure would be nice to ahve full functionality without being on .mac

    Iweb it sure would be nice to ahve full functionality without being on .mac. I am apro photographer I need to look professional. I would like a hit counter and a fully functioning slide show. Too bad I cannot do this with the current iweb

    Welcome to the forum
    I am a .mac user, and there are lots of others on here who aren't and they use both slideshows and hit counters.
    If you are prepared to do a little post publishing processing of scripts and html, then these things are available to you.
    For a slideshow, visit Cyclosaurus' site, he has done great work for non .mac users.
    For a hit counter, do a search on this forum for either NeoCounter or Stat Counter, you should get a few threads back.
    Good luck and enjoy iWeb.
    Will
    1GHz G4, 15" PowerBook, Airport Network, 1G iPod Mini   Mac OS X (10.4.6)   www.willg4pb.com for iWeb tips

  • When are we going to be able to use full functions on siri in the UK?

    when are we going to be able to use full functions on siri in the UK?

    All Apple has stated it that more countries will be added in 2012.

  • EJB Lite or Full function EJB?

    Hi,
    I create a web project and create some EJBs in it. Then compile it to WAR. Is that full function EJB or EJB Lite? Should I create a separated EJB module to activate full EJB?
    Thanks

    I have a related question actually; in JEE6 you can deploy EJBs in a WAR. But can you also deploy MDBs and such things as a persistence unit and JPA entities?
    Hard to find information about that :/ I guess I should just give it a try and see what works.
    @OP: I would say it is not up to the specification; it is up to the server implementation how profiles are provided. Look up in the server manual how you setup a domain/instance to be a web profile in stead of being the full JEE6 stack. Most likely you'll just need to use a preconfigured one; for example in JBoss 6 you'd use (a copy of) the 'web' instance.

  • Why does SSL VPN require client for full functionality?So What's the point?

    I was interested in SSL VPN because I thought that I could have the same functionality I have when connecting via Cisco VPN 3000 concentrator (IPSec with AH and ESP enabled), but without the hassle to deploy and maintain client VPN's for thousands of users.
    However, to my disappointment, based on the information below from www.cisco.com (and I believe that it is the case from other vendors, right?) SSL VPN offers limited functionality if deployed clientless. Why is like that?
    Imagine I have a VPN (IPSec) solution functional today. If I deploy SSL VPN (clientless) what lack in functionality should I experience? Why a VPN client is required if SSL VPN can successfully establish the tunnel? I don't get it.
    "...SSL VPNs provide two different types of access: clientless access and full network access. Clientless access requires no specialized VPN software on the user desktop; all VPN traffic is transmitted and delivered through a standard Web browser. Because all applications and network resources are accessed through a browser, only Web-enabled and some client-server applications-such as intranets, applications with Web interfaces, e-mail, calendaring, and file servers-can be accessed using a clientless connection. This limited access is suitable for partners or contractors that should be provided access to a limited set of resources on the network. And because no special-purpose VPN software has to be delivered to the user desktop, provisioning and support concerns are minimized."

    Hi,
    Clientless SSL VPN only able to access application through browser (i.e. HTTP and HTTPS). If you need to acces other application like RDC, you need full SSL client.
    Full SSL Client is deployed automatically depends on how you configure the SSL VPN box (temporary or permanently);
    1. From the SSL VPN box, you can configure it to download and be installed to user PC permanently (500KB+). When the user successfully authenticated by the SSL VNP box, it will download the client and install automatically/permanently without any help from the network administrator. The user need to login on his/her PC with administrator priviledge.
    2. From the SSL VPN box, you can configure it to download and be installed to user PC temporary (500KB+). When the user successfully authenticated by the SSL VPN box, it will download the client and install temporary without any help from the network administrator. The user need to login on his/her PC with administrator priviledge.
    In one of my deployment, I have 1000+ SSL VPN user. I just need to create a 10 page User Manual/Guide complete with troubleshooting on their own. I use the first option which is automatically download and permanently install in their PC. Patching the SSL VPN Full Client need to upload the new client in the SSL VPN box only and it will automatically patch the client in user PC.
    Dandy

Maybe you are looking for