Full-HD and DV-PAL

Hi,
My video-cam records DV-PAL and DV-PAL is interlaced. When I want to burn a DVD to play it back on Full-HD TV, do I have to de-interlace the video? Because Full-HD is always 1080p and not 1080i. In FCP when I play back the video the picture is very bad (Kammeffekt, I don't know this term in english). This is because the Computer builds up the picture in a progressive manner like a Full-HD TV. So, can a Full-HD TV handle a interlaced video?

Because Full-HD is always 1080p and not 1080i.
That is incorrect. A majority of 1080 HD is interlaced. TV's being marketted are 1080p, but the broadcast signal is 1080i.
Shane

Similar Messages

I have the adobe cloud 9.99/ month photography package i downloaded lightroom 5.4, it told me it was a trial version, and i'm now at the end of the trial and it won't let me download the full version and i don't have a serial number

i have the adobe cloud 9.99/ month photography package i downloaded lightroom 5.4, it told me it was a trial version, and i'm now at the end of the trial and it won't let me download the full version and i don't have a serial number. also, when i click buy, i get an error message saying, "application not found."

There are two different LR’s, one with a serial-number licensing and one with a CC-signin license.
You should uninstall the serial-number LR you have installed, then
Quit the CC Desktop application,
Restart the CC Desktop application—this will rescan what you have installed and not see LR,
LR will now be on the CC Desktiop apps list, so install that.

I've installed ios 7.0.6 on my iphone 4 and lost voice on outgoing and incoming calls. My simm is ok, i've checked it, I've done a full clean and restore. Still no calls. Please help.

Hi there,
I've just installed ios 7.0.6 on my iphone 4 and now lost voice on outgoing and incoming calls.It rings on incoming and I'm told rings on the recipient's 'phone, but then no vocal communication...its just dead. My simm is ok, i've checked it, I've done a full clean and restore of the 'phone. Still no calls.
I've not caused any physical or water damage to the 'phone. I would welcome any help/suggestions to get my calls back asap.
Please help.
Miss liberty

Have you tried restarting or resetting your iPhone?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
Also consider deleting and reinstalling the Mail Account in question.

I'm not techinal so please bear with me. I don't have the bar that allows me to type in a website. I did have a few minutes ago. When I make the page full screen and move my cursor to the top of the page, the bar drops down and I can use it. help

I'm not techinal so please bear with me. I don't have the bar that allows me to type in a website. I did have a few minutes ago. When I make the page full screen and move my cursor to the top of the page, the bar drops down and I can use it. I've tried restarting my computer, didn't work. Help!

Well I figured it out, right click the arrow that makes the screen bigger and unclick the Hide Toolbar. I knew it couldn't be that hard.

I mistakenly told Firefox to go Full Screen and now I can't get it to undo and I can't access anything else.

I downloaded the latest Firefox. In trying to learn some of the new features, I hit the Full Screen option. It went to full screen and now I do not have access to the functions I need. I can't do anything! I need to find out how to undo my mistake or I will not be able to use firefox at all. I can't even get to the portion where I can go to my gmail.

Have you tried pressing the F11 key on your keyboard? It toggles Fullscreen mode.

QUERY FOR CUSTOMERS FULL DEBIT AND CREDIT WITH CLOSING BALANCE

Hi Friends,
   I need query for CUSTOMERS FULL DEBIT AND CREDIT WITH CLOSING BALANCE for selection criteria from date and to date.
   I know the Trial Balance Report will sort out this issue... but i need routeday wise report
1. Business Partner Master Data - i created one UDF field called U_Routeday (MONDAY, TUESDAY, WEDNESDAY,THURSDAY,FRIDAY)
2. The query should be like selection criteria
                              - Routeday [%0]
                              - Posting Date [%1]
                              - Posting Date [%2]
CardCode
Debit
Credit
Balance
D10503
25031.50
24711.50
2962.00
D10641
5466.00
7460.00
285.00
D10642
2866.00
142.00
give any helpful query ASAP... Thanks in advance

Hi,
Try this query:
Declare
@fromdate as datetime
Declare
@Todate as datetime
Declare
@Code as nvarchar(25)
set
@fromdate = ( select min(Ta.[RefDate]) from OJDT ta where
Ta.[RefDate] >= [%0])
set
@Todate = ( select max(Tb.[RefDate]) from OJDT tb where Tb.[RefDate]
<= [%1])
set
@code = (select max(Tc.[ShortName]) from JDT1 tC where Tc.[ShortName]
= [%2])
SELECT
[Name] as AcctName, [Jan]= sum([1]), [Feb]= sum([2]), [Mar]=
sum([3]), [Apr]= sum([4]), [May]= sum([5]), [June]= sum([6]),
[July]= sum([7]), [Aug]= sum([8]), [Sept]= sum([9]), [Oct]=
sum([10]), [Nov]= sum([11]), [Dec]= sum([12]), total = sum
(isnull([1],0)+ isnull([2],0) + isnull([3],0) + isnull([4],0) +
isnull([5],0) + isnull([6],0) + isnull([7],0) + isnull([8],0) +
isnull([9],0)+ isnull([10],0) + isnull([11],0) + isnull([12],0))
from
(SELECT
T0.[ShortName] as Name, sum(T0.[Debit]-T0.[Credit]) as T,
month(T2.[RefDate]) as month FROM JDT1 T0 INNER JOIN OACT T1 ON
T0.Account = T1.AcctCode INNER JOIN OJDT T2 ON T0.TransId =
T2.TransId WHERE T2.[RefDate] between @fromdate and @todate and
T0.[ShortName] = @code GROUP BY T0.[ShortName],T2.[RefDate] ) S
Pivot
(sum(T)
For Month IN ([1],[2],[3],[4],[5],[6],[7],[8],[9],[10],[11],[12])) P
group
by [Name],[1],[2],[3],[4],[5],[6],[7],[8],[9],[10],[11],[12]
Let me know your result.
Thanks & Regards,
Nagarajan

I've cleared almost 30 gig off of my hard drive in the past 2 weeks, and it will temporarily show that in the Get Info box. But hours later, I am still getting a disk full error and all of the memory has disappeared.

I've cleared almost 30 gig off of my hard drive in the past 2 weeks, and it will temporarily show that in the Get Info box. But hours later, I am still getting a disk full error and all of the memory has disappeared. I have cleared my backup logs from Time Machine, checked the mail folder, cleaned out tons of photos and videos and it still keeps filling back up.
In checking the log files, here is the message repeated over and over....
Jul 4 07:18:13 Donald-Keele-Jrs-iMac-123.local CalendarAgent[213]: CoreData: error: (21) I/O error for database at /Users/donjr/Library/Calendars/Calendar Cache. SQLite error code:21, 'unable to open database file'
Jul 4 07:18:13 Donald-Keele-Jrs-iMac-123.local CalendarAgent[213]: Core Data: annotation: -executeRequest: encountered exception = I/O error for database at /Users/donjr/Library/Calendars/Calendar Cache. SQLite error code:21, 'unable to open database file' with userInfo = {
NSFilePath = "/Users/donjr/Library/Calendars/Calendar Cache";
NSSQLiteErrorDomain = 21;
Jul 4 07:18:14 Donald-Keele-Jrs-iMac-123.local cfprefsd[180]: CFPreferences: error creating file /Users/donjr/Library/Preferences/com.apple.iPhoto.plist.t3l894p: 28
Jul 4 07:18:30 Donald-Keele-Jrs-iMac-123.local Printer Pro Desktop[275]: Empty task
Jul 4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: [0x16697c0] |ISyncSession|Warning| com.microsoft.Entourage2008: transitioning to cancel - session cancelled by server: Client 'com.microsoft.Entourage2008' tried to start a session for the plan 45AD80C3-0D52-4CF2-8CBA-103564B6C47C and the plan no longer exists.
Jul 4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: Warning: NSBundle NSBundle </Applications/Microsoft Office 2008/Office/Microsoft Sync Services.app/Contents/Resources/MicrosoftOfficeNotes.syncschema> (not yet loaded) was released too many times. For compatibility, it will not be deallocated, but this may change in the future. Set a breakpoint on __NSBundleOverreleased() to debug
Jul 4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: Warning: NSBundle NSBundle </Users/donjr/Library/Sync Services/Schemas/MicrosoftOfficeNotes.syncschema> (not yet loaded) was released too many times. For compatibility, it will not be deallocated, but this may change in the future. Set a breakpoint on __NSBundleOverreleased() to debug
Jul 4 07:18:45 Donald-Keele-Jrs-iMac-123 kernel[0]: (default pager): [KERNEL]: default_pager_backing_store_monitor - send LO_WAT_ALERT
Jul 4 07:18:45 Donald-Keele-Jrs-iMac-123 kernel[0]: macx_swapoff SUCCESS
Jul 4 07:19:31 Donald-Keele-Jrs-iMac-123.local Printer Pro Desktop[275]: Empty task
Any ideas on what to do next?
I'm running and iMac 20-inch early 2009
Processor 2.66 GHz Intel Core 2 Duo
Memory 8 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 9400 256 MB
Software OS X 10.8.4 (12E55)

Step 1
Quit Calendar. Triple-click the line below to select it:
~/Library/Calendars/Calendar Cache
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window should open with a file named "Calendar Cache" selected.
Move the selected file to the Trash. There may be one or two other files in the same folder with names that begin in "Calendar Cache". If so, delete those files too.
Step 2
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash as well:
iPhoto ▹ Empty Trash
Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
To locate large files, you can use Spotlight. That method may not find large folders that contain a lot of small files.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders. It may take some minutes for ODS to list all the files.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal.

How to create a Bool Option for Full Screen and Page Item in Mucow?

Hi Guys!
I was looking to create a bool option in Mucow widget options which toggles between Full Screen and a Normal Page Item .
Example: Qooqee's Google Map Widget
Need some help.
Thanks in Advance

Dear Pushpa,
Transaction Code :SHD0 is working fine.
Please accept my sincere thanks for your sharing your Knowledge.
I am able to fulfill my
Regarding the enhancement, I have not tried.
Once I will complete, I will award the fulll marks to you.
With Best Regards,
Raghu Sharma

Is there any way to view full pdf and office documents opened in safari? they just open partically if they are bigs

is there any way to view full pdf and office documents opened in safari? they just open partically if they are bigs

Drag them to your iTunes library. Download the free iBooks app. Select the PDFs you want too sync in the iTunes books pane. The iBooks app will show your books collection or your PDFs collection as you select.

Ozone 3 Demo great, bought the full version and now it won't work

Bought Ozone 3 for mastering because I downloaded a trial version that was great. Installed the full version and now it won't show up in my garageband effects windows? Any help would be greatly appreciated. It shows up in pro-tools but not garageband? Any ideas or advice?
Thanks in advance.

I was able to get some help with the situation by going to the thread at:
https://discussions.apple.com/thread/4091321?tstart=0
I followed the basic idea of the guy who said OH! I've got it! or something like that. He listed several things to do to uninstall all apple programs then finally amds (which did uninstall but it still displayed in the Programs page) as well as to download the newest version of iTunes, save it to the desktop and run it by right-clicking and installing as admin. It worked. Thanks for offering to help with the situation.

I went to the full screen and don't like it and need to know how to get back to what I had. Also, is there a good way to set up bookmarks? Like in a column on the left or right side? Thank you.

I went to the full screen and don't like it and want to get back to what I had. Also, is there a way to set up bookmarks so that all show in a column on the left or right side?

Just press F11 on your keyboard to exit full screen mode.

I'd like to switch from full view and keep it. Also keep the color I've chosen.

Every time i open the Firefox browser it has changed to full view and the color I had chosen previously has changed back to blue. The option to change to the compact view has disappeared. What can I do to correct this? This is very annoying and I am considering not using this as my default browser. Please help!!! Thanks for any help you are able to provide.

If you have a program like GoodReader you can transfer the files over your wireless network. Also you will have the ability to view all types of files. You can transfer the files within iTunes if you have a program installed that can read it. Go into iTunes, attach your iPad, click on your iPad and then click Apps tab scroll down to the bottom to File Sharing, you will see a list of Apps on you iPad that you can transfer file to. Select an App and click the add button then select your PDF file.

Siebel 8.2 Vanilla SRF different from SRF with Full Get and Full Compile

This has been an issue I've been banging my head on the wall against. Basically, I installed Siebel Public Sector 8.2 in Unix and did so without any problems. I created a Mobile Client, generated and extracted the Database and did a full get using Siebel Tools. I then did a full compile and obtained an SRF file (in my local Windows machine). I compared this SRF file with the existing SRF in the Unix Server and the two files are quite different. The full get + full compile SRF has 519 objects that are modified and new when compared to the server SRF.
Now, here's the kicker. Remember this is a new installation of Siebel, when I use the Vanilla SRF file in the server, the Contact Income View works. Now when I overwrite this Vanilla SRF with the SRF I get by doing a full get + full compile, Siebel crashes when these runtime events happen. Drilldown to a contact (create one if there's none), go to the Income tab, then go to different screen (say Cases or Home). Siebel crashes and creates an FDR file. When I revert to the Vanilla SRF, everything is fine again.
My question is, why are the two SRFs different from each other and why does the full get + full compile create a "malfunctioning" SRF?
Any guidance with this issue will be highly appreciated.
Bernhard

The extract database job ran without any problems. Here are my parameters:
Client Database encryption key: none
Client Name: <mobile client name>
Encrypt client Db password: false
The Mobile client uses the Routing Model: MOBILE CLIENT - EXTRACT ONLY
I also ran the extract database job using the following parameters:
Client Database encryption key: none
Client Name: <mobile client name>
Encrypt client Db password: false
Extract all Repositoryt Tables: true
but it resulted in a failure when I did a full compile.

File dialog box: how get full path and filename (firefox 3.0 problem)

Hi,
I have a smilar problem then discussed in this thread: file dialog box: how get full path and filename
Now this solution doesn't seem to work in firefox 3.0,I only get the filename but not the full path.
I have tried to solve this problem by adding *"netscape.security.PrivilegeManager.enablePrivilege("UniversalFileRead");"* in a javacript function but that doesn't do the trick
Although when i tested it local it does work.
Any idees how to solve this?
Best Regards
Stijn

Actually, that is strange and scarry. With 20% of the browser market share they decide to behave like Microsoft did in the past - they want to decide what users need and what they do not need. With 3.0 I have a real problem with some of my applications. They are all tested in IE6, IE7, FF2.0 and they all work the same way (they even work with Opera and Safari). Now, I will for sure not go there and make it work for 3.0, just because 2 out of 200 users use FF3.0. Up to now I have always recomended FF as the best browser. 3.0 causes my opinion to change completely. Competition is always good but it is a question if it is good if we have 20 different browsers out there with equal market shares.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

How do I get the full path and filename of the current document?

I'm writing a format plug-in. How do I obtain the full path and filename of the current image (document) from within my plug-in? Any help would be greatly appreciated!

I actually just figured this out. For anyone else who would like to know, check out the propetizer sample code in the photoshop sdk. It makes a "filter" plug-in that just spits out all the properties of the document you could ever want to know about. The function I used to get the full path and filename of the current document is PIGetDocumentName(). I hope this helps someone eventually...

Full-HD and DV-PAL

Similar Messages

Maybe you are looking for