Full HD Video Stutter

I am working on a corporate video piece at the moment. I have 250 GB of memory left at the moment. I had some previous clips used for another piece that I am using on this one. I simply open those sequences with the clips I needed and cut and pasted them into the new piece. I did this yesterday for an early clip with no problems. Then today I tried it again for another piece and the normally fluid video clip now stutters. I tried shutting down every other application. I tried completely shutting down the computer and restarting. I tried uploading the HD video again from the original source and the stuttering still continues. I tried rendering the entire piece full, but still no luck. What is strange is that the video clips already in the timeline and the bins from the original input work fine. It is only the new video imported where I am having the problem. The camera I am using is a Panasonic HS700 (Which I have never had an problems with and works fine integrated with FCE. Anyone have any ideas?

Re-Volt-Age Films wrote:
The HS700 runs at 29.97 fps - strange that I haven't had this problem in the past, I must have changed the settings. Not sure how to change the settings on FCE, is this done in Log & Transfer? I looked in FCE easy set up and found where you can change the frame rate but I am not sure this will fix my problem?
The Sequence will have to be 29.97 fps to match the camera.
Create a NEW Sequence with those properties and copy/paste your exiting 25 fps Sequence into it.
You are done.
"Since most of the video in the sequence is in 25fps can I input the other smaller clips in at 25fps as I am almost done and am on a deadline for this?"
I'm a little confused here!
Doesn't the camera shoot 29.97?
How can most of the clips be 25 unless they are not from your camera?
Al

Similar Messages

Slow graphics performance - login screen, launchpad, full screen video all stutter

Since installing Mavericks, I've found that several system animations are slow/stutter. This is on a 2012 MacBook Air with maxed out hardware specs so its not b/c I'm running an old system.
Some examples:
- When booting up, right before I reach the login screen, the display quickly flashes blue. This leads me to believe something funky is going on with my graphics card/drivers
- The login animation, where you click your username and it floats to the middle of the screen so you can type in your password, is very jerky, taking 2+ seconds to complete. Previously it had been fast and smooth
- When using Launchpad, expanding folders often takes several seconds. The folder will start to expand, freeze, and then finally finish. This tends to be more of a problem for folders with 1 row of icons. Large folders oddly seem to expand ok / smoothly
- Watching full screen video in iTunes causes the audio to stutter (the video playback is still smooth). If I make the window smaller, audio and video playback are smooth again
Is anyone else experiencing these kinds of graphics issues? Any idea whats going on or how to fix?

Quit Chrome and see whether there's any change. If not, see below.
Step 1
When you notice the problem, launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the View menu or the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for User, System, andIdle at the bottom of the window.
Select the Memory tab. What value is shown in the bottom part of the window for Swap used?
Next, select the Disk tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard by pressing the key combinationcommand-C. Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

Hi Guys, I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out

Hi Guys,
I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out as this web-site has been payed for by my client.
Alex

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Lenovo 3000 N200 0769 Vista 32bit video driver (NVidia) full screen video problem

Hi, would appreciate an update from Lenovo about this.
The NVidia VGA driver just displays a blank screen when playing video in full screen mode when hardware acceleration is turned on (the default setting). Obviously it's a pain to turn off the hardware acceleration just to get full screen video working.
There is a generic version of the driver available from Nvidia but they advise not to use it as the oem versions are apparently modified for features like turning the screen off when the lid is closed. Maybe someone's tried the generic NVidia driver and can let me know if it's worth a go. Ideally it would be nice to hear if Lenovo are aware of the problem and are going to release an update.
Thanks
Cliff

im not sure if this will help new to forum but hey here u go anyways scan through the guide about the suipport & downloads should have all ur info there
http://forum.lenovo.com/lnv/board/message?board.id=N_Series_Lenovo_3000&message.id=2652

Mini-DVI to DVI - 1920x1080 full-screen video

Just bought a mini-DVI to DVI adapter to hook up my Mid-2006 MacBook to my Acer H223H 23" LCD screen. It works fabulously as expected, except when I try to watch full-screen video on the Acer LCD at 1920x1080. What's strange is that when I'm watching video in a window (using VLC), I can increase the size of the window until it almost takes up the whole screen, but then any further than that causes noticeable jerkiness (a lot of dropped frames) in the video playback. Any ideas what's going on here?
I hope this is the right forum for this and thanks in advance for helping me out!

Posted too soon before fully exploring the situation. A little more context: I'm running a fresh install of Snow Leopard.
I used the mini-DVI to DVI adapter and my LCD to hook up my girlfriend's laptop (MacBook running Leopard). Full screen video in VLC plays no problem (even used the same file). Also, I tried playing a DVD on my MacBook and it ran flawlessly. Clearly the issue is VLC's compatibility with Snow Leopard.
Thanks anyway - glad to know this community is here if I have any other issues.

Macbook pro redina display keeps on telling me that the hard drive is full from Videos, and yet their is no videos, what can i do?

Macbook pro redina display keeps on telling me that the hard drive is full from Videos, and yet their is no videos, what can i do?

If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Ignore any other messages that appear in the Terminal window.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal.

Is it possible to transfer Full-HD videos (from a Full-HD camcorder) from iMovie 11 to compressor 4 and create there a AVCHD DVD which can be played in HD quality at a PS/3?

Is it possible to transfer Full-HD videos (from a Full-HD camcorder) from iMovie 11 to compressor 4 and create there a AVCHD DVD which can be played in HD quality at a PS/3?

Yes.
In iMovie use SHARE/Export Movie.
http://help.apple.com/imovie/#mov3a9e5615
Choose 1920x1080 (or size of your choice.
Give it a name and location.
You can drag this file into Compressor.
In Compressor, use "Create BluRay Disk"
That should work fine.
There is another alternative, where you could skip the DVD and Compressor.
Just SHARE/EXPORT USING QUICKTIME
Choose Movie to MP4
In Options, choose h.264 as the Codec.
Choose a bit rate of 16000 or less.
Create the movie.
You can then put it on a USB thumb drive and play it on the PS3.

What is the best practice for full browser video to achieve the highest quality?

I'd like to get your thoughts on the best way to deliver full-browser (scale to the size of the browser window) video. I'm skilled in the creation of the content but learning to make the most out of Flash CS5 and would love to hear what you would suggest.
Most of the tutorials I can find on full browser/scalable video are for earlier versions of Flash; what is the best practice today? Best resolution/format for the video?
If there is an Adobe guide to this I'm happy to eat humble pie if someone can redirect me to it; I'm using CS5 Production Premium.
I like the full screen video effect they have on the "Sounds of pertussis" web-site; this is exactly what I'm trying to create but I'm not sure what is the best way to approach it - any hints/tips you can offer would be great?
Thanks in advance!

Use the little squares over your video to mask the quality. Sounds of Pertussis is not full screen video, but rather full stage. Which is easier to work with since all the controls and other assets stay on screen. You set up your html file to allow full screen. Then bring in your video (netstream or flvPlayback component) and scale that to the full size of your stage (since in this case it's basically the background) . I made a quickie demo here. (The video is from a cheapo SD consumer camera, so pretty poor quality to start.)
In AS3 is would look something like
import flash.display.Loader;
import flash.net.URLRequest;
import flash.display.Bitmap;
import flash.display.BitmapData;
import flash.ui.Mouse;
import flash.events.Event;
import flash.events.MouseEvent;
import flash.display.StageDisplayState;
stage.align = StageAlign.TOP_LEFT;
stage.scaleMode = StageScaleMode.NO_SCALE;
// determine current stage size
var sw:int = int(stage.stageWidth);
var sh:int = int(stage.stageHeight);
// load video
var nc:NetConnection = new NetConnection();
nc.connect(null);
var ns:NetStream = new NetStream(nc);
var vid:Video = new Video(656, 480); // size off video
this.addChildAt(vid, 0);
vid.attachNetStream(ns);
//path to your video_file
ns.play("content/GS.f4v");
var netClient:Object = new Object();
ns.client = netClient;
// add listener for resizing of the stage so we can scale our assets
stage.addEventListener(Event.RESIZE, resizeHandler);
stage.dispatchEvent(new Event(Event.RESIZE));
function resizeHandler(e:Event = null):void
// determine current stage size
    var sw:int = stage.stageWidth;
    var sh:int = stage.stageHeight;
// scale video size depending on stage size
    vid.width = sw;
    vid.height = sh;
// Don't scale video smaller than certain size
    if (vid.height < 480)
    vid.height = 480;
    if (vid.width < 656)
    vid.width = 656;
// choose the smaller scale property (x or y) and match the other to it so the size is proportional;
    (vid.scaleX > vid.scaleY) ? vid.scaleY = vid.scaleX : vid.scaleX = vid.scaleY;
// add event listener for full screen button
fullScreenStage_mc.buttonMode = true;
fullScreenStage_mc.mouseChildren = false;
fullScreenStage_mc.addEventListener(MouseEvent.CLICK, goFullStage, false, 0, true);
function goFullStage(event:MouseEvent):void
    //vid.fullScreenTakeOver = false; // keeps flvPlayer component from becoming full screen if you use it instead
    if (stage.displayState == StageDisplayState.NORMAL)
        stage.displayState=StageDisplayState.FULL_SCREEN;
    else
        stage.displayState=StageDisplayState.NORMAL;

My MacBook is brand new, shy of a month and I don't understand why it was recently started to lag whilst watching full screen videos on youtube? Somebody help me please...

Somebody help.. I don't get what's going on. This didn't happen in the beginning, it was completely fine with watching full screen videos, but now it seems to "glitch" now and then and appear slow and laggy. whattttt

If the computer seems normal except for watching youtube the problem is probably between you and your ISP or between the ISP and youtube. If your computer seems slow no matter what you are doing try restarting your computer and see if that helps. (If so pay attention to your Page Outs in the Activity Monitor and also how much free space your hard drive has.)

MacBook Pro Retina 13" fan very loud/overheats when playing full screen video/games

Hi,
Just purchased a MacBook Pro Retina, refurbished (because why not - the same product for a cheaper price) around a month ago. It's the 13 inch and is the model before the most recent one came out (4GB of RAM instead of 8GB - late 2013). From the very first day, playing a full-screen video on any site (be it YouTube, Facebook, etc) just makes the fan much louder than usual (so loud that you can almost hear it more over the video itself). Thought it may have been just a thing with Flash Player being buggy, but the problem has persisted for a while now. I'm not even pushing the CPU to any limits - literally playing a full-screen video on Facebook (not even in HD) makes the fan go crazy.
Just last night I tried installing Borderlands 2 and it was the same thing - FPS rate was fine, no lag, just the fan was so loud that I actually got scared for my computer and turned it off. After closing the app and checking out the fan temperature, it was at 91c.
Never happens when browsing/surfing or doing my usual work.
Should I go give it back to Apple? The thing is I start university in less than a week (and hence will be traveling), so not sure if I can afford to give my laptop in to them for a long period of time (I know it should be free though since mine is a refurb item). May it just be an issue that is quickly repairable or is this worse?

During processor intensive activities—such as processing HD video or playing a game that makes extensive use of the graphics processor—the fans speed up to provide additional airflow.
http://support.apple.com/kb/ht4543
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.
Genius Bar reservation:
http://www.apple.com/retail/geniusbar/
Best.

Full Screen Videos in iTunes Don't Work in Leopard

Hi,
I've upgraded my MacBook Pro from Tiger to Leopard and I do have a registered Quicktime Pro 7 license. The QuickTime tab shows me that it's a Pro version. However, if I am trying to play full screen videos in iTunes I just see the mini video in the screen center. Any idea how I can fix this?

I have recently relocated to Australia & have since updated my itunes account with an Australain address.
The issue is your credit or debit card. They must be associated with the same country in which you reside.
"Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store. You can use the iTunes Store in all countries of which you’re a resident, but you’ll either need a separate iTunes Store account for each one, or you’ll need to continually be switching your billing information on your single account. Generally, it’s simpler just to set up an alternative account for these situations."
From here > The Complete Guide to Using the iTunes Store | iLounge Article

Bug? Menu Bar Not Accessible in Safari After Watching Full Screen Video

Hi everyone,
I have had this Not accessible menu bar problem time to time while using Safari, and I finally figured out what caused it. It always happens right after you go to a full screen video mode, and then get back out, and now when you move the mouse curser to the top, menu bar doesn't show. Then a way to fix is by using the 4 finger gesture to go back to the desktop screen, and come back to safari (not too fast) and menu bar is again accessible. Why is apple not fixing this bugs? I have seen more thread about menu bar gone, so it's not just me.

QuickTimeKirk wrote:
Hit the escape key to exit full screen.
That may be a "works as expected/designed," but once you've exited Full Screen View, then reenter Full Screen View and play a video in full screen mode, the window switches out of Full Screen to display the video in full screen video mode. It doesn't stay in Full Screen view, like it is the first time around.
EDIT:
Esc exits full screen video mode, but you still cannot access the slide-out menu bar with the button. Repeatedly pressing Esc does not exit Full Screen View, either. This only appears on the first invocation of Full Screen view and video mode. Once you exit Full Screen, the window behaves differently.
Note that we have determined this is only affected by HTML5 video. I have to do some more testing to figure out if it is ClickToPlugin that is causing the issue.
What's a good source for straight HTML5 video?

HD clips have video stutter after import

New problem with Sony HDR-SR5 import:
2 of 10 clips from recent vacation have video stutter/jerkiness upon import. All other clips are fine. The two clips that stutter in iMovie 08 play fine on the videocamera. I have never seen this before. I have reimported the abnormal clips, but no change. The audio is okay; it is just the video Any ideas?
Mark

*How comforting* ( for me alas ) to find I'm not alone with this problem.
Config: iMac-Intel - 2,16MHz, 1Go RAM, 320Go internal drive, 500Go USB external drive, OS-X 10,4,11 ( Tiger ) IMovie 7,1,1, SONY HDR-SR5E
My first few imports worked fine, then Imovie started to quit and 2 other movie sequences were corrupted ( stuttering image ) no matter how long they lasted or which HDD I decided to store them to.
Apparently other posters have signaled this to Apple, but that unfortunately does not help us getting on with our respective work.
It would seem there are only 2 solutions while we wait -
FCE = hand in wallet, or
Just copy the files from the SONY directly to a HDD location and wait for the Imovie issue to be solved.
Maybe unplug my Firewire Presonus Firebox ?????
All futher comments and possible work-arounds welcome naturally.

FCP video stutter

I am running FCP 6.0.6 on my MacBook Pro (2.53 GHz Intel Core i5, 4 GB 1067 MHz DDR3) and saving all my projects on an external hard drive. I've tried to search for this problem but haven't been able to locate a solution:
I am getting video stutter on both my external monitor as well as my viewer window in FinalCut. The external monitor stutters when I play from the time line, but the canvas window looks fine. I tried trashing my preferences but the problem remains. What else can I try?
I also can't update from Apple as I do not have my serial number.
Thanks for any help.
-Patrick

You don't give any details about your video format or sequence settings etc. so you could be using something completely inappropriate.
Have you trashed all the prefs completely? http://www.digitalrebellion.com/pref_man.htm
Does the problem appear in your final output . . . . DVDs, the web etc.? If not it does not really matter.

970 4G FPS drop for second screen when playing full screen video

Hi,
I have two 1440p monitors connected to my graphcis card using DVI connectors.
Whenever I play a full screen video on the secondary screen, I was always get an FPS drop. It doesn't matter if I switch the cables around to make the other one the secondary screen.
I have tried replacing the monitors and the same thing happens and I can only conclude it must be the graphics card.
Does anyone know how I can troubleshoot this problem?

Quote from: krash.raj on 31-May-15, 20:04:19
1) I'm not familiar with this concept. Why would switching port type provide more bandwidth?
2) Also, the card I'm referencing only has 1 display port connection. Would using one dvi and one display port cable work?
1) Google for "dvi", "hdmi" & "displayport" and you'll find out why.
2) use DisplayPort + dual-link DVI (always suggested by Nvidia)
http://www.geforce.com/hardware/desktop-gpus/geforce-gtx-970/specifications

Full HD Video Stutter

Similar Messages

Maybe you are looking for