FULL INTEL BUT DON�T INSTALL SOLARIS 8

Hi friends:
This is my hardware:
-Intel Desktop Board D815EEA2
-Intel Processor PIII 800 Mhz
-Ram 128MB 133 MHZ
-Quantum Fireball IDE
-Cd-rom creative 52X BOOT
This is my Solaris 8:
-Part No. 704-6907-10
This is the process:
****pass bios OK
****solaris device configuration assistant window OK
****bus enumeration window WARNING
NON-ACPI device: PNP0C01
memory: 9FC00-9FFFF, 7EE0000-7EF7FFF, 7EF8000-7EFFFFF, 7EC0000-7EDFFFF, FFF00000-FFFFFFFF
ACPI device: PNP0C01
memory: 9FC00-9FFFF, E0000-EFFFF,40FFC00-7EFFFFF
****bus enumeration window WARNING
NON-ACPI device: ISY0050
Port: 3F0-3F5,3F7;IRQ:6;DMA:2
ACPI device: ISY0050
Port: 3F0-3F1,3F2-3F3;3F4-3F5,3F7;IRQ:6;DMA:2
*****scanning device OK
*****Identified Devices OK
*****Loading OK
*****Boot Solaris (check CD) OK
*****Starting Solaris WebStart Installation FULL GRAY PAGE WITH SYMBOL "_" BLINKING IN THE CORNER
What happened?
What is the solution?

Use Disk1 0f 2 Solaris8 Software and then disk2 of 2.I had a similar issue using the useless Solaris8 Installation 10/100 disk

Similar Messages

Download Reader, but don't install

How can I download the latest Adobe Reader version without the automatic installation? I do not accept software that automatically installs into C:\Program Files. I just tried to download the 8.1.2 update, but it tried to immediately install.
Is there any way to download ONLY?
Thanks.

Download it from here:
http://ardownload.adobe.com/pub/adobe/reader/win/8.x/8.1.2/enu/AdbeRdr812_en_US.exe

What Happens if I Buy Apps but Don't Install Them on iPhone?

I have a number of Apps I'm not using that are taking up screen space on my iPhone. Can I uncheck them in iTunes? Then what happens? Are they deleted from the phone? Do they continue to update in iTunes? Can I check them later and re-install them?
I depend on my iPhone so much I didn't want to experiment and possibly lose something I might need later. Thanks for your help!

Hello, Welcome to discussions
*Yes you can un-sync the Apps from an iPod Touch or iPhone and they will be in iTunes as long as you have copied them into iTunes.
*From here iTunes will inform you when there are updates for those Apps, You can update them in iTunes and then sync this updated App back to an iPod Touch or iPhone.
Copying iTunes Store purchases from your iPod or iPhone to a computer
http://support.apple.com/kb/HT1848
*They are not deleted from the iPhone if you sync them as in gone forever. But they are un-synced and can be synced back when you are ready for them again.
How to redownload purchased applications from the App Store
http://support.apple.com/kb/HT2519

Partitions problems installing solaris 8 2/04 on Sun v240

Hi all,
I'm trying to install Solaris 8 on a v240 sun machine. The machine is new, and I think it comes with Solaris 10 installation files pre-loaded. I don't want them, I need Solaris 8.
I'm starting installation booting from cd to use my Solaris 8 cds. During initial installation steps the system promts following question:
Searching for a location to place the Solaris installation software...
Searching disks for upgradeable Solaris root devices...
The following root devices were found to be upgradeable:
Release Root Device
Solaris 10 c1t0d0s0
Swap slices are usually erased at each reboot, so it is preferable
to place the Solaris installation software on a disk slice labeled swap.
The disk slice, c1t0d0s1, labeled as swap,
is large enough to hold the Solaris installation software.
NOTE: All information on the selected swap slice will be erased.
Can c1t0d0s1 be used for the Solaris installation software [y,n,?,q] y
And I need to choose one to go on. Then, when I reach the step to set disk partioning up it tells me that I have to do it using cylinders. I try it, but the slice that is being used in the first step (see above) to store installation files is named as swap and I cannot edit it.
How can I proceed? I want to edit my partioning during installation process as I always have done when installed Solaris before.
What is goin on? any help?
Thanks a lot in advance!!!

Since this is a fresh installation, you might consider starting it all over again.
You may have made some initial selections while prompted at the beginning of the install process, that accidentally omitted essential system files.
As for that device path and the disk? It's pointing to an external non-Sun peripheral that's connected to the rear external SCSI port. That drive has some bad sectors. ( I wouldn't trust a new OS on those sectors until you fixed them.)
The errors are not calling out either of the two possible internal drives.
Infodoc 21216 lists a few default system device paths, and ...Sun Fire [TM]v120 / Netra[TM] 120
PCI slot 0               /pci@1f,0/pci@1/<device>@1,*          33mhz-32bit-5V
disk 1                    /pci@1f,0/pci@1,1/scsi@8/sd@0,0
disk 2                       /pci@1f,0/pci@1,1/scsi@8/sd@1,0
External SCSI Port          /pci@1f,0/pci@1/scsi@8,1/<device>
CDROM                    /pci@1f,0/pci@1,1/ide@d/sd@0,0
Network 1               /pci@1f,0/pci@1,1/<network>@c,1
Network 2               /pci@1f,0/pci@1,1/<network>@5,1

Install Solaris 5.10 64 bit with Raid 1

Hi Oracle Support
At present I have two server X2270 with information below :
S erver 1 have 4 h ard d isk ( 1 h ard d isk = 1TB)
S erver 2 have a h ard d isk ( 1 h ard d isk = 1TB)
I want to Move one HDD from server list order no.1 to server list order no.2. Mean 1 of 4 HDD of server1 will move to server2
And it should be: server1 has 1TB x3 HDD and server2 has 2TBx2
After , Server1 configure with RAID5, server2 configure with RAID1 .
I configured Raid 1 on Server 2 but when I install Solaris , I don’t see Hard disk configured Raid 1 .
Thanks
LuyệnTV

Just because you have two disks doesn't mean that Solaris will automatically use them as mirrors. You have to set this up, using SVM, ZFS VxVM, or the hardware RAID controller. Sometimes you can do this as part of the install, often it's done afterwards.
You haven't said what type of root file system your Solaris is on, so it's not possible to give you a procedure to mirror the boot drive.
If you use hardware RAID, it will zero any data on the drives, so that's probably out. I suspect you are using hardware management on your first system, as Solaris can't boot from a software striped or RAID5 device. This had to be setup before Solaris was installed on that system.

Which platform to install Solaris 8 on?

Hi all!
What would be the best Intel hardware choice for installing Solaris on for a brand new company ... no legacy hardware or software.
Sparc solutions seem to pricey to consider at this time, so we're sticking to Intel.
Dell has some nice rack mountable servers that we're considering... Anyone know of problems with installing solaris on these?
Thanks!
- Nayan Hajratwala
[email protected]

Make sure that the hardware is compatible with Solaris 8... Check the compatibility list before you purchase any hardware for your company... If you want SPARC's you could probably use the generics like Tatung or the likes which are cheaper that SUN's boxes... OF course the best thing to look for is the support... Sun has been great with their support.

CAN I INSTALL SOLARIS 10 INTEL PLATFORM ON MY PC

Can anybody guide me whether i can install solaris 10 intel platform on my pc having following configuration
1. Processor = AMD SEMPRON 2500+ 64-BIT.
2. MainBoard = ASUS K8V-MX.
3. RAM-= 512 MB DDR PC3200
4. Display = Onboard VIA/S3G Unichrome Pro IGP.
5. LAN = Onboard VIA RHINE II Fast Ethernet Adapter.
6. Monitor = 17" LG CRT, Model = Studioworks 700S
7. Sony DVD- ROM.
8. Samsung DVD-RW.
9. HDD = 40 GB Samsung 7200 RPM.
If anybody knows let me know at my e-mail [email protected]

I don't think you will have many problems in this platform, but I'm not 100% sure.
What I recommend you is to get the VMWare and try there. VMWare is a software where you can create a virtual machine running under windows. In this virtual machine you could install solaris 10 (and any other OS you want to test in your computer). I have my Solaris 10 running under VMWare with excellent results (Laptop with Intel Celeron processor)... where I have VMWare installed in Windows!

Fail to install solaris 8 for intel

hello. i downloaded three files and made a CD for each one. but during the installing on a Dell PowerEdge 6450
(4 x Pentium III 550)which has two AIC 7899 ultra160/m SCSI adapters and a Dell PERC RAID controller (i note they are not included in the hardware compatibility list of solaris 8 for
intel), the install process stopped when it was "I2O Nexus:
initializing IO processor 0" and didn't go any further. when i attempt to intall it on another machine(2 x PIII 1000) which has a AIC 7892 ultra160/m SCSI adapter, the process
stopped saying "no disks that meet the criteria in the solaris installer documentation found" after solaris web start began to run. before this, it has reported resource conflict of PNP0C01
and ISY0050. and the installing stopped when "using RPC bootparams for network configuration information" on a PIII 800 PC. what's wrong with my installing. is it due to the incompatibility of hardware or something else?how to resolve it if possible? help is in need very much.besides,what does
DCA mean?sorry, i'm a newbie in this field.
thanks
xoing

Hi,
Problem with PERC RAID controller card.
You try to install the driver for AIC 7899 and Dell PERC RAID controller card. In dell computers, they have dell PERC RAID controller driver for Solaris 7 version. They don't have the driver for solaris 8 version.
You can download driver for SCSI AIC 7899 from this URL:
http://www.adaptec.com/worldwide/support/driverdetail.html?cat=/Product/ASC-39160&filekey=u160_slrs_v121_dd.img.Z
Then you check with your local dell support provider for PERC RAID controller driver for solaris 7 and solaris 8.
Thanks.
revert back.
regards,
Senthilkumar
SUN - DTS

No disk found error while install Solaris 8 intel on Compaq

I use the interactive installation method to install Solaris 8 02/02 intel platform on Compaq DL380 G2 with 4*36.4 GB harddrive and 2G memory. After I configue the network and time, an error message comes up: "No disk found. Check to make sure disks are cabled and powered up."
When I try the Web Start, it will jump the the shell prompt and say something like "No location for installation software ...."
Could anyone give me some clue? Thanks.

Dir Mr. zhechang,
We had the same error with you, but we install Solaris 9 on the DL380 G3 Compaq machine. Could you please help me to solve the errors if uou the solution about it
Thanks and best regards,
Nhut Pham

How to Install Solaris for Intel so that it boots off from a boot floppy?

Hi all,
Sorry to bother you with this one (I went through all documentations/manuals and could not find straight answers to following
specific questions):
I have one hard drive with 1st partition used by Windows XP and a second partition that's a blank FAT 32 (using Partition Magic)
I want to use for Solaris for Intel.
My very specific questions:
(1)That blank Fat32 partition: can I run the Solaris install over it ..or should I absolutely make sure that it's a blank UFS formatted
partition? I am asking you that because all manuals (except one) pretend that I can run my Solaris install on a blank Fat partition...
but I believe that documentation at multiboot.solaris-x86.org stresses that if the partition is not a blank UFS one, it wont install Solaris
(2)As you already know, some Oses like Linux or FreeBSD can be installed on a partition and be booted off a boot floppy.
So without that boot floppy, no trace of the OS. How can I do that with Solaris for Intel. I want my Solaris to boot off a boot floppy only.
BTW, I currently have Solaris 7 for Intel.
Thanks for the answers.

(1)That blank Fat32 partition: can I run the Solaris install over it ..or should I absolutely make sure that it's a blank UFS formatted You can install Solaris to that blank FAT32 drive but Solaris WILL convert it to UFS BEFORE doing the install. In other words, after the install it will be UFS and not FAT32 anymore.
So without that boot floppy, no trace of the OS. How can I do that with Solaris for Intel. I want my Solaris to boot off a boot floppy only.Not that I know of. Some people have reported booting Solaris off of a USB drive though.
alan

Please help me! To Install solaris 8 on Intel plateform

Hi All,
During when I tried to install Solaris 8 on my machine I repetadely used to encountered following problem listed below.I have also checked my motherboard's chipset with Sun's Hardware Compatiability List, it is there.
My Machine: Intel PIII
Motherboard: Intel 820
Processor Speed : 600Mhz
Ram 128Mb
Operating system to be installed : Solaris 8
The problems:
1. During the boot time I used to see:
SUN-OS Intel Plateform edition Primary Boot system VCN 2.0
Warning: ACPI table not in reclaim memory.
2. When This window disappear I will have this window:
SUN-OS secondary Boot Version 3.0
Solaris Intel Platform Edition Booting system
3. During when system is comming up I used to see after following error after when systems shows :
Warning: Can not merge HWconf devinfo Node Fdc@1,3f0
I have consulted so many sun's plublication to cope with this problems, but could not over come. Therefor, please advise me how could I handle this problems?
Sarad

I've come across the same error messages in the same
sequence and have been stumped about how to resolve
the problem. I'm hoping that someone will read and
have an answer to these error messages.
chris
Hi All,
During when I tried to install Solaris 8 on my machine
I repetadely used to encountered following problem
listed below.I have also checked my motherboard's
chipset with Sun's Hardware Compatiability List, it
is there.
My Machine: Intel PIII
Motherboard: Intel 820
Processor Speed : 600Mhz
Ram 128Mb
Operating system to be installed : Solaris 8
The problems:
1. During the boot time I used to see:
SUN-OS Intel Plateform edition Primary Boot system VCN
2.0
Warning: ACPI table not in reclaim memory.
2. When This window disappear I will have this
window:
SUN-OS secondary Boot Version 3.0
Solaris Intel Platform Edition Booting system
3. During when system is comming up I used to see
after following error after when systems shows :
Warning: Can not merge HWconf devinfo Node Fdc@1,3f0
I have consulted so many sun's plublication to cope
with this problems, but could not over come. Therefor,
please advise me how could I handle this problems?
Sarad

If anybody can Help me! installing solaris 8 in intel chipset 820v

Hi All,
During installation of Solaris 7 or 8 in Intel plateform, I have encountered following problem listed below.I have also checked the motherboard's chipset with Sun's Hardware Compatiability List, it is there.
My Machine: Intel PIII
Motherboard: Intel 820
Processor Speed : 600Mhz
Ram 128Mb
Operating system installed : Solaris 8 or 7
The problems:
1. During the boot time I used to see:
SUN-OS Intel Plateform edition Primary Boot system VCN 2.0
Warning: ACPI table not in reclaim memory.
2. When This window disappear I will have this window:
SUN-OS secondary Boot Version 3.0
Solaris Intel Platform Edition Booting system
3. During when system is comming up I used to see after following error after when systems shows :
Warning: Can not merge HWconf devinfo Node Fdc@1,3f0
Therefor, please advise how I could cope with this problems?
Sarad

there are security levels for wpa connection. such as low- normal - high ( 64 bit -128 bit -256 bit )
if you select 64 bit secure method, you need to enter 8 characters for password. if you enter 7 and save and exit, some computers can connect but some not. make sure you have 8- 16- 32 characters and entered correctly.
to check if it's password issue, disable the secure connection and try again. if it doesn't work, we can try some other solutions.

Installing Solaris 8 (Intel)on Toshiba laptop

Hi,
I will try to install Solaris 8 (Intel) on Toshiba laptop. but before I do that I would like to know if if this version of Solaris is compatible with laptops (Toshiba Satellite 4000).or I need additional drivers (if yes where can I get them from).
I have 160 Mbyte of physical memory on this machine and it is P2 266 MHZ.
i would really appreciate the help

Hi, Me too wanted to install Solaris 8 (Intel) on Toshiba laptop(Toshiba Satellite 2800). Maybe I will install GNOME onto it, keep in touch if any luck. Thanks!

Unable to install Solaris 10 for intel on IDE hard disk?

I was trying to install solaris on an 80 GB IDE HDD with
AMD 32 bit ,XP2000 cpu, 1024 MB RAM using a DVD rom
drive with the first/second solaris os install CD.
BUT after 2nd CD , i got the message 'Short Read/Read Error'
after the GRUB boot loader screen.
Repeated after formatting disk using Red Hat linux (linux installed successfully on same disk/machine without problems) but even then
when i retried installing solaris 10, it failed with same error.
Same set of CDs installed successfully on intel xeon server with
1 GB RAM, 32 GB SCSI HDD.
Does solaris install on IDE hard disks on intel 32 bit PCs?
pl help/

Sometimes it's possible to use drivers for older Solaris x86 systems
to install the latest Solaris x86 release.
http://h18023.www1.hp.com/support/files/server/us/family/model/2543.html?submit.y=0&submit.x=0&lang=en&cc=us
To do that, you have to modify HP's ITU floppy. For Solaris 10 x86,
rename the DU/sol_2X directory on HP's floppy to DU/sol_210 .
See also:
http://forum.sun.com/thread.jspa?threadID=22200&messageID=68765

I have downloaded/paid fora plug in from adobe site (cracked backgrounds) it told me ti install creative Cloud which i have done but i cannot install the plug in into lightroom5 via plug in manger to use the backgrounds...please help as this is the firs

Ihave downloaded/paid for a plug in from adobe site (cracked backgrounds) it told me ti install Creative Cloud which i have done it shows the plug in on there as downloaded but i cannot install it into lightroom 5 to use? i have tried the plug in manger but it says cannot install plug in..also downloaded the Adobe extension manager cc but that does not add either....Please help first time i ave tried to install a plug in !!!!!! Lucy

Dear Lucy
Please remember to unzip the file from your Downloads folder in order to load them into Lightroom.
What is the error in Lightroom?
Did you read the 'Where to Find it' section?
Thanks,
Krystal - Add-ons team

FULL INTEL BUT DON�T INSTALL SOLARIS 8

Similar Messages

Maybe you are looking for