Full load - Every month data loading without deleting previous data

Dear SDN,
I am loading (Full load) Data from 001.2005 to 010.2007 using 0FI_GL_1 with the selection option Fiscal Year/Period (From : 001.2005 and To : 010.2007) ...
From next month (011.2007) onwards, when loading data everytime it deletes entire data and again loading (Since i have kept an option in Infopackage -- Datatargets Tab -- Delete entire content of datatarget)...
My doubt is wheather without deleting the whole data, can we load from next month data onwards...so, if that is the case shall i use Fiscal year/Period range ?? (or) should not use Fiscal year/Period range...
But the client needs data only from 001.2005 onwards not beyond that
Please help me to resolve this issue..
Help will be greatly appreciated with points...
Thanks....

Hello Venkat,
Unfortunately you can not do that way, because in period 11.2007 (assume this is the period that you want to newly load to cube.) there might be posting in previous period. And these postings made to previous period should also reflect to cube. Only way is delete and reload by using full.
Other option you might use a ODS before sending to cube. you might every time load full data, ODS key fields might be checked by system and neccesary inserts and updates will be done by system, so there wont be duplications. And finally only new data will be sent to cube as delta.
Sarhan.

Similar Messages

My friend synced a video to my ipod but it erased all my data on my ipod,but i cant figure out how to load my old libray back without deleting the movie. my friend cant tell me the password. How can I get my old library back without deleting the movie?

My friend synced a video to my ipod but it earased all my data on my ipod,but I can't figure out how to load my old library back without deleting the movie. My friend shares a family account so she can't tell me the password. How can i get my old library back without deleting the movie?

Linnwarner wrote:
She does have the right because she bought the movie.
Not true at all.
You only buy the right to your own personal use.
You do NOT have the right to distribute to others.
This is illegal. There is no doubt about it

HT204053 I have a school ipad with iCloud using a different ID (my school email address) . I am leaving and want to buy my own ipad and transfer all my data and docs to my personal iCloud account but don't know how to do this without deleting all data and

I have a school ipad with iCloud using a different ID (my school email address) . I am leaving and want to buy my own ipad and transfer all my data and docs to my personal iCloud account but don't know how to do this without deleting all data and photos?

Heya Katie!!
So, the article you have there, HT4895, is pretty good. Just look at the FAQ section of it.
But basically, you will want to create a backup on your computer through iTunes...Just plug your current iPad into it and make sure your iPad and iTunes are logged in with the same Apple ID. At that point, just create a backup.
When you get your new iPad, and before you plug it in or set it up, follow the directions in this link to change your Apple ID. http://support.apple.com/kb/HT5621?viewlocale=en_US
Once you have that done, plug your new iPad into your computer to sync up with iTunes. Follow the directions for Restore from Backup and it should bring all that info back to your new iPad.
And changing your Apple ID email info will allow you to have your own!!! This should solve all your issues and GL!!!

Time capsule partition without deleting the data?

I have a Time Capsule already with data and would like to set a limited space for backups. Is it possible to partition a Time Capsule (or create an image) without deleting the data it already has? Can anyone provide a step-by-step or tutorial?
Thanks a lot in advance.

The following instructions will work for Lion and Mountain Lion Macs, but I have not tested on Mavericks....which seems to be just that....a Maverick.
Changing the maximum size or case-sensitivity of a sparse bundle

Extend characteristic length without deleting any data

Hi All,
I have to change an info object's length. However, this info object is used in some infocubes and DSOs (that generate SID).
Is there a way on extending chrs. length without deleting any data that is contained in the infoproviders.?
They've really huge data volumes. I dont want to delete all the data and re-upload.
Regards
SP

Moving thread to:
Extend characteristic length without deleting any data

How do I delete history without deleting website data?

How do I delete history in Safari without deleting website data? In Mavericks only history was deleted, but in Yosemite, both history and west data is deleted.

Create an application from this Applescript with AppleScript Editor and run it whenever you want to clear just the history:
tell application "Finder"
activate
delete file "History.db" of folder "Safari" of folder "Library" of folder "XXXX" of folder "Users" of startup disk
empty trash
end tell
where XXXX is your Home folder name or user short name.

How does one delete previous data on iphone as user has changed

how does one delete previous data on iphone 4s as user has changed

I would do these things
To wipe phone
Turn off imessage in settings/messages
Turn off Facetime in settings/Facetime
Delete icloud account in settings/icloud
Erase all data and settings in settings/general/reset
Get the previous owner to delete the phone from their profile in https://supportprofile.apple.com if they registered the phone there

Loading Historical data to the new field without deleting the data in cube

Dear BI Experts,
I have enhanced a new field to the Generic data source in BI 7.0 .
I need to load historical data to the newly appended field.
As we are having very huge data it is not possible to delete and do init again.
Is there any other possibility to load the historical data for the new appeneded field without deleting the old requests?
Thanks for your Kind help.
Kind Regards,
Sunil

Dear Sushant,
Thanks for your reply.
But I am just wondeing if there is any possibility of loading historical data for new field using Remodelling concept
with out deleting old requests.
I do not know about Remodelling conept but heard that it is not recommeneded to use.
Can you please suggest and help.
Thanks and Regards,
Sunil Kotne

Enhancing the standard Data source without deleting setup tables

Hi all,
I am in the the Support Project. My requirement is I want to Enhance u201C2LIS_13_VDITMu201D LO- data source with two fields without disturbing the delta.
Please suggest me how I have to do this.
As Per my Knowledge ,
1. we have to delete setup tables
2. Enhance the data source & re populate the setup tables.
3. Delete the data in the cube & add the two new fields in the cube & repopulate the cube with new Initial .
4. after that delta will be enabled through job control.
But this process is not suitable for our requirement because delta was enabled long back it is going very smooth till date, I donu2019t want to disturb that process.
So please suggest me is there any other procedure to do this.
Thanks,
Kiran Manyam

Hi,
If historical data (loaded earlier in to BW) are not required for the two enhance field, then it is not required to deleted the setup table and reload them to BI.
In this case simply you can follow the following procedure.
1. Enhance the fields, and update the transfor structure(to unhide these fields). In BI update the required data target with respective IO. and in exit populate the enhance fields. No need to disturb the delta
2. Replicated the DS in BI and do the mappings in tranformation.
Here the existing delta is working, and you will be populating the two fields in the exit only.
Thanks,
Jugal.

Creating a simple batch job to run every month and perform a deletion

dear all;
This is just for learning purposes
I have created a simple table below
create table t1
vid varchar2(30),
quantity number(6,2),
primary key (vid)
insert into t1
    (vid, quantity)
values
    ('G1', 2);
insert into t1
    (vid, quantity)
values
    ('G2', 3);
insert into t1
    (vid, quantity)
values
    ('G3', 0);Now, I would like to create a simple batch job, that runs every month which is used to delete all vid that has a quantity of 0...How do i go about doing that. I have searched the web but can't seems to find any useful info so far..
Edited by: user13328581 on Sep 8, 2010 8:32 AM

you are missing a semi-colon in your package procedure call inside your begin ... end.
begin
dbms_scheduler.create_job
    job_name => 'jobdeletezeroquantity'
    , program_name => 'PLSQL_BLOCK'
    , job_action => 'BEGIN mfg.testpkg.deletezeroquantity END;'             <-- missing semi-colon on mfg.testpkg.deletezeroquantity
    , start_date => systimestamp
    , repeat_interval => 'freq=monthly; byday = 1'
    , end_date => null
    , enabled => True
    , comments => 'used to run a delete procedure every month'
end;should be:
begin
dbms_scheduler.create_job
    job_name => 'jobdeletezeroquantity'
    , program_name => 'PLSQL_BLOCK'
    , job_action => 'BEGIN mfg.testpkg.deletezeroquantity; END;'
    , start_date => systimestamp
    , repeat_interval => 'freq=monthly; byday = 1'
    , end_date => null
    , enabled => TRUE
    , comments => 'used to run a delete procedure every month'
end;

How can I delete history without deleting website data

HHow can I delete safary history without deleting website data

Create an application from this Applescript with AppleScript Editor and run it whenever you want to clear just the history:
tell application "Finder"
activate
delete file "History.db" of folder "Safari" of folder "Library" of folder "XXXX" of folder "Users" of startup disk
empty trash
end tell
where XXXX is your Home folder name or user short name.

How can I have a waveform graph (or chart) updated using the value propertynode without loosing previous data plots?

I want to have a master waveform graph (or chart) capable of displaying data via the value property node. There are several value nodes in a flat sequence structure. The problem is that the graph (or chart) doest keep the previous data and does display just the very last value property node. Can anybody help me?

A graph does not "keep" any data. It is strictly an indicator which displays the most recent values written to it.
A chart has an internal buffer, called, Chart History which retains previously written data until the buffer is full. Then it removes the oldest data when new data is sent to the chart.
1. Sequence structures are almost never needed in good LabVIEW programs. They defeat dataflow and limit parallelism.
2. Value property nodes (and local variables) should only be used under special circumstances and a sequence structure is not one of those.
A state machine with shift registers or a Producer/Consumer architecture are more likely to be better ways of doing what you are trying to do and can be implemented without sequence structures or Value property nodes.
Lynn

Synching Ipod on new computer without deleting previous content?

Hi! I've had my Ipod for quite some time and have recently gotten a new PC. I downloaded Itunes in order to put more files on my Ipod but it won't let me move the files on my Ipod to Itunes, and says I can't put new files on it without deleting the old ones. Is there any way to avoid getting all the files on my Ipod deleted?

check this post by Zevoneer.
JGG

Got Firefox Sync but lost my Key how can i get my data back without delete everything ?

My computer was deleted, i don't have any others devices ? How can i get back my information.
Apparently, there is no solution, this is shame. Why in my account i can't get back my key https://account.services.mozilla.com/ ? This service is useless if when we have a problem (all devices stolen for example) we can't get back any information...
I'm really disappointed, and so are others people as far as i can see. I have to start from the beginning all my bookmarks, so i will use Chrome from now. Thanks a lot Mozilla.

Sorry, but you're using Sync incorrectly if you don't have any other devices connected to that Sync account.
Sync wasn't intended to be a "cloud" storage device; it's intended to be used to "synchronize" a user's across multiple devices. Upon completion of the initial setup of Sync procedure, the user is shown the Recovery Key and is told to make a copy of that "key". There are buttons in the dialog window to "save" to disk or to "print" the Recovery Key. Unfortunately, too many users just ignored that message (or ignored it) and put themselves in the same position that you are now in - lost data and no way to recover that data.
The Sync / Recovery Key is used to encrypt your data as it is being uploaded to the Sync server and then used to decrypt your data when it is downloaded to one of your devices. Without the exact Sync Key that the user's data was encrypted with, the user's data is useless scrambled bunch of 1's and zero's.
Firefox 29 has a new version of Sync that eliminates the need for the user knowing their Recovery Key. The method that generates that "key" uses the user account name (email address) and the user password, so in the future user's shouldn't find themselves in the same position that you are now in.
''IMO, Mozilla provided too much security by having that 3rd security "key" (the Recovery Key), considering how many user's aren't using Sync as it was intended to be used.''

How do you delete game center without deleting the data from the games?

Our family has 4 apple products all assigned to one apple id. When my son set up his game center account it link all of your games together. We have tried many times to delete it without any luck. Is there any way to delete in with out wiping out his data and purchases from the games?

Game center can not be deleted. Move it to a folder for unused apps.

Full load - Every month data loading without deleting previous data

Similar Messages

Maybe you are looking for