Full load works, but delta fails - "Error in the Extractor"

Good morning,
We are using datasource 3FI_SL_ZZ_SI (Special Ledger line items) to load a cube, and are having trouble with the delta loads. If I run a full load, everything runs fine. If I run a delta load, it will initially fail with an error that simply states "Error in the Extractor" (no long text). If I repeat the delta load, it completes successfully with 0 records returned. If I then rerun the delta, I get the error again.
I've run extractions using RSA3, but they work fine - as I would expect since the full loads work. Unfortunately, I have not been able to find why the deltas aren't working. After searching the Forums, I've tried replicating the datasource, checked the job log in R/3 (nothing), and run the program RS_TRANSTRU_ACTIVATE_ALL, all to no avail.
Any ideas?
Thanks
We're running BW 3.5, R/3 4.71

And it's just that easy....
Yes, it appears this is what the problem was. I'd been running the delta init without data transfer, and it was failing during the first true delta run. Once I changed the delta init so that it transferred data, the deltas worked fine. This was in our development system. I took a look in our production system where deltas have been running for quite some time, and it turns out the delta initialization there was done with data transfer.
Thank you very much!

Similar Messages

SMTP works, but POP3 fails

I've been a Thunderbird user for around 8-10 years now, and I use it with multiple email accounts. I've run into a configuration issue I've never seen before, and I cannot find a solution (so far).
I changed my broadband ISP from Comcast to Frontier. With Frontier, of course, I get an email account. I can access and use the account just fine via webmail. However, when I manually configure in Thunderbird (autoconfigure produces the wrong settings), password authentication fails,
When I try Advanced Configuration, SMTP works, but POP3 fails.
I contacted Frontier support to verify the correct settings. They are as follow:
POP3: pop3.frontier.com, SSL/TLS, Port 995
SMTP: smtp.frontier.com, SSL/TLS, Port 465
I'm using full email address for the user name. He double-checked the password on the POP3 server, and it's correct. I also disabled my firewall, but it didn't help.
I'm perplexed as to why SMTP should work but not POP3.
They do not support IMAP.
Any ideas, anyone?

SMTP works but pop fails:
so you can send but not receive?
Please provide info:
Help > Troubleshooting Information
click on 'Copy text to clipboard'
paste info into this forum question
you can edit/remove all info on fonts and printers but nothing else.
When you try to Get Messages, do you get an error message?
If yes, what does it say...word for word?

When try to connect my iPod touch 4th gen to my house Wifi it won't connect, it used to work fine but now it dosen't work, but it does say that the internet is available, but when I tap on it it just loads. all other devices work fine.

When try to connect my iPod touch 4th gen to my house Wifi it won't connect, it used to work fine but now it dosen't work, but it does say that the internet is available, but when I tap on it it just loads. all other devices work fine.

Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Full load from r/3 failed due to bad data and no psa option selected

SDN Experts,
Full load from R/3 failed loading in to ODS and in the infopackage on psa selected. how to fix it? can i rerun the infopackage again to load from R/3? May be it will fail again? is this a design defect?
i will assign points. Thank you.
Les

Hi,
There is obsolutely no prob. in re executing the package, but before that, check
your ODS and Info Source is re active and update rules are also active if any..
and you can check the option of target info provider selected properly along with
the PSA option and also check whether you have any subsequent process like
updating data from ODS to Cube and so on..
You can also check the data availability at R/3 for the respective DS by executing
RSA3.
Hope this helps..
assign points if useful..
Cheers,
Pattan.

Photoshop CS5 broke down twice. I deinstalled and than reinstalled. Now CS5 works but I can't install the updates. "An error occurred, try it again later." But it's not said what error occurred.

Photoshop CS5 broke down twice. I deinstalled and than reinstalled. Now CS5 works but I can't install the updates. "An error occurred, try it again later." But it's not said what error occurred.
Thank you for your help.
Walter

Thank you very much for your help. Now, I was able to install the update (Adobe Photoshop 12.0.4 update for Adobe Photoshop CS5, Mac). But I couldn’t mark the answer as correct. I didn’t find the „correct“ button.
Kind regards
Walter
Am 25.12.2014 um 16:06 schrieb station_two:
Photoshop CS5 broke down twice. I deinstalled and than reinstalled. Now CS5 works but I can't install the updates. "An error occurred, try it again later." But it's not said what error occurred.
created by station_two in Photoshop General Discussion - View the full discussion
OK, here's the Windows version of the update:
Adobe - Photoshop : For Windows : Adobe Photoshop 12.0.4 update for Adobe Photoshop CS5
and for Mac:
Adobe - Photoshop : For Macintosh : Adobe Photoshop 12.0.4 update for Adobe Photoshop CS5
Of course, ignore the idiotic recommendation that appears there to try to use Help > Updates. We already know that doesn't work.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7043416#7043416 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7043416#7043416
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

I have a new ipad and everything works but can't connect to the app store. Itunes works and the wifi seems to be working but i get a blank white screen when i open the appstore.Nothing will load unter the features or charts tab. Any Suggestions?

I have a new ipad and everything works but can't connect to the app store. Itunes works and the wifi seems to be working but i get a blank white screen when i open the appstore. Nothing will load unter the features or charts tab so i cant download any apps. Purchased and updates tab loads fine. Any suggestions?

You would get better response from the iTunes community forum.
Have a nice day!

Trying to burn CD but keep getting error message "The attempt to burn a disc failed. The burn failed because of a medium write error. Tried different speeds with no luck

trying to burn CD but keep getting error message "The attempt to burn a disc failed. The burn failed because of a medium write error. Tried different speeds with no luck

The burn failed because of a medium write error. Tried different speeds with no luck
Then try to use a different brand of DVD or at least a different batch of DVD. The disk may be defective.

Since upgrading to Lion, my time machine backups are failing - error message: The backup disk image "/Volumes/Jackie Scanlon's Time Caps/Jacqueline Drabczynska's MacBook.sparsebundle" could not be accessed (error -1). Any ideas?

Since upgrading my Macbook to Lion, the time machine backups are failing - error message: "The backup disk image “/Volumes/Jackie Scanlon's Time Caps/Jacqueline Drabczynska’s MacBook.sparsebundle” could not be accessed (error -1)." I have rebooted the TIme Capsule and it worked OK, but don't want to do that every time. Any suggestions? Thanks

Any new info on this?
I had the exact same problem and went crazy and spent a hecka lot of time trying to deal with my brand new 2TB Time Capsule and almost brand new MacBook Pro. Then I thought I fixed it...and I tried SO MANY things, I don't really know what did it...except taking out any apostrophe's in names of stuff that Apple puts in there...BUT...now it's back.
Grrr...

I tried updating my iphone 4s to the ios 7 but it said error with the firmware now my phone is stuck in recovery mode and i have no idea how to fix it any suggestions??

i tried updating my iphone 4s to the ios 7 but it said error with the firmware now my phone is stuck in recovery mode and i have no idea how to fix it any suggestions??

Try Restoring it 3 times in a row and see if that works.
If not that error can indicate one of two things: Your iPhone was at one time jailbroken, had the iOS version rolled back, or ran an unauthorized beta and if none of those things are true it is a hardware error.

HT6114 My iMac seems to have frozen during the update- how long should I expect the update to take? The 'installing software update' bar is still showing itself working but has been stuck in the same position for over an hour.

My iMac seems to have frozen during the update- how long should I expect the update to take? The 'installing software update' bar is still showing itself working but has been stuck in the same position for over an hour. Any thoughts?

Update2: There is something very wrong with wireless on mountain lion recovery. I don't know what the problem is, but this link may explain:
http://osxdaily.com/2012/08/10/os-x-mountain-lion-10-8-1-beta-released-for-dev-t esting-may-include-wi-fi-fix/
Wireless recovery would start out with over 25 hours estimated and kept on failing. It turns out to be a two step process of downloading a few Mbytes then a 4Gbyte .dmg file, but I couldn't even download the Mbyte file. I bought the thunderbolt to gigabit ethernet adapter, plugged it in, restarted recovery and download of a little more than 4Gbytes took less than an hour. My limiting factor was probably comcast home internet rate of 12Mbps. The wi-fi wireless connection should be able to do over 100Mbps, so wireless shouldn't be much slower than wired, except wi-fi wireless is broken. Now that ML is installed and updated, wi-fi seems fine now, as I am using it right now, but I haven't tried downloading a big file yet.
Don't use wi-fi wireless for Mountain Lion recovery.

HT4356 My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

hi
could you tell us what the other app is please

My iPod 5th gen touch went through the washing machine. It still works but it has water in the screen and I can't get it out. I put it in uncooked rice for a day but it didn't work. And suggestions??

My iPod 5th gen touch went through the washing machine. It still works but it has water in the screen and I can't get it out. I put it in uncooked rice for a day but it didn't work. And suggestions??

Leave it in the rice for at least a day and change the rice every other day or so. The rice and iPod should be in a sealed container.
Apple will exchange your iPod for a refurbished one for $149. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the screen yourself if you are up to it
iPod Touch Repair – iFixit

My home button is not working but apple will not honor the limited warranty

My home button on my ipod touch is not working but Apple will not honor the limited warranty because the corner glass is craked. I have been using it cracked for months. What is my legal recourse. I think it is unfair!!!!!!

tracy252 wrote:
My home button on my ipod touch is not working but Apple will not honor the limited warranty because the corner glass is craked. I have been using it cracked for months. What is my legal recourse. I think it is unfair!!!!!!
Hire a lawyer.

My old computer (a Sony) with my iTunes crashed. I have a new MAC and want to make sure I can keep all of my music (mostly from old CD's that have been lost). I bought iTunes match hoping that would work but it isn't using the data on my phone. HELP!

My old computer (a Sony) with my iTunes crashed. I have a new MAC and want to make sure I can keep all of my music (mostly from old CD's that have been lost). I bought iTunes match hoping that would work but it isn't using the data on my phone. HELP!

Since you have purchased a new Mac (which, BTW, is not typed in all capitals) why not buy a Time Capsule <http://www.apple.com/airport-time-capsule/> which is designed specifically to work with OS X and Time Machine?
You don't say what part of your Sony "crashed." If it was not the HDD it is possible to take the computer apart, put the HDD in an external case, then recover the data off of it (including the music) simply drag-n-drop. If it was the HDD that "crashed" that makes it more difficult.
If you are able to recover the music from the Sony you can then add it to the iTunes library on the Mac and iTunes Match will then scan, match and upload the tracks to be mirrored in the cloud.

I have a new iMac with osx 10.8.3 i can not get my hp laserjet m1522nf scanner to work. The printer works but when in scanner mode the scanner does not show up

I have a new iMac with osx 10.8.3 i can not get my hp laserjet m1522nf scanner to work. The printer works but when in scanner mode the scanner does not show up.I tried to install the newest hp driver for the printer but when I install the computer ca not find the printer.

Repair permissions and restart your computer.
Make sure you have the updated scanner drivers installed.
Install the gimp drivers: http://gimp-print.sourceforge.net/MacOSX.php
http://support.apple.com/kb/PH11070 OS X Mountain Lion: Troubleshoot a network printer
http://support.apple.com/kb/PH11143 OS X Mountain Lion: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
What to do when you can't print

Full load works, but delta fails - "Error in the Extractor"

Similar Messages

Maybe you are looking for