Full Motion ok when preview slide, but not preview project

Using Captivate 3, recording using Full Motion. Several full motion slides were fine, but one gives me a blank white page when I preview using next 5 slides, From this slide, or project. I can even hear the audio, but I see nothing. When I preview just the slide, I can see it working fine. I've deleted it and re-recorded it, left out the audio, put the audio back in. Nothing seems to work.
I've renamed the captivate_v30.dat file and re-opened Captivate to no avail. This never happened in 2.0, is there an issue in 3.0?
Thanks in advance.
Barb

Hi there
Flash Player 10.
Click here to read a thread where I believe one of the Adobe Captivate team (Shameer) sheds a bit of light on the issue.
Click here for an Article and link for uninstalling Flash Player/Plug In:
Click here for an Article and link for installing and older version of the Flash Player/Plug In:
Downgrade your player to Version 9 and it should allow things to work okay with Captivate 3.
Cheers... Rick
Click here for Adobe Certified Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Similar Messages

  • In ipad email, I can see the content "subject " of the email in the preview pane but not in the right side of the screen.  its blank...any ideas

    In new IPAD, in email, can see subject data in preview pane but not on right side of screen, its always blank  any ideas

    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Or
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • IMovie HD will let me preview titles, but not update or embed.

    IMovie HD will let me preview titles, but not update or embed.

    Do you try the correct way?
    http://www.danslagle.com/mac/iMovie/usage/5017.shtml

  • How can I get my ical events from my iMac to my iPhone? Anything I entered into ical on my iPhone will transfer to ical on iMac when plugged in, but not vice versa.

    How can I get my ical events from my iMac to my iPhone? Anything I entered into ical on my iPhone will transfer to ical on iMac when plugged in, but not vice versa. I think I have changed my iPhone (after looking at similar questions) to iCloud, but it's still not syncing.

    You need to sign into your iCloud account on your Mac, and check the Calendar option. System Preferences>iCloud, sign on your iCloud account, check the apps you want to sync with your device.
    Cheers,
    GB

  • Firefox throws "This Connection is Untrusted" when using hostname, but not when using IP address

    I am remotely accessing a website which has iFrame in it. The website uses https, but iFrame tag has "src" pointing to a site using http only. However, when I remotely go to the site, iFrame shows the message below although the ''src" url is http only (there is no SSL certificate) when I use IP address (https://10.10.101.156:8006/apprecovery/admin/Core/Storage) in address bar instead of hostname (https://hostname:8006/apprecovery/admin):
    ===
    This Connection is Untrusted
    You have asked Firefox to connect
    securely to d37t50w1, but we can't confirm that your connection is secure.
    Normally, when you try to connect securely,
    sites will present trusted identification to prove that you are
    going to the right place. However, this site's identity can't be verified.
    What Should I Do?
    If you usually connect to
    this site without problems, this error could mean that someone is
    trying to impersonate the site, and you shouldn't continue.
    d37t50w1 uses an invalid security certificate.
    The certificate is not trusted because it is self-signed.
    (Error code: sec_error_ca_cert_invalid)
    ===
    Why is it giving this when using hostname but not when IP address is using?

    Corrected first para above:
    I am remotely accessing a website which has iFrame in it. The website uses https, but iFrame tag has "src" pointing to a site using http only. However, when I remotely go to the site, iFrame shows the message below although the "src" url is http only (there is no SSL certificate) when I use hostname address (https://<hostname>:8006/apprecovery/admin) in address bar. But I dont see the message in iFrame when I instead use IP Address (https://<IP Address>:8006/apprecovery/admin) to go to main website.

  • Text caption visible on slide but not when running project

    I am using Captivate v4.
    I have one slide of 64 where the text cpation is seen on the slide and runs correctly when using F3 - but when I run the project / F10 the text caption does not appear.
    I have copied the slide with this error onto a blank project as i assumed the project might be corrupt - but the same happens on the blank project.
    Help please...anyone ?
    Noel

    Thanks Rod and Rick,
    Not sure what was the cause of the problem - but have fixed it now.
    After trying many things, including copying the project onto a new blank Captivate project - none of which worked, I did the following and the problem was fixed.
    Working on the original project and the slide with the error - I removed the text caption that was not working (for the nth time) and thought I would try one more time to put the text caption back using a different font.....
    When I opened the text caption option I noticed there are "two" options for the transparent text caption one above the line and one below, see below;
    I selected the transparent option below the line...and it worked OK.
    Have to assume that the ones above the line are the most recently used, and I must have been using this one without noticing which one I was selecting - and there was something wrong with the one above the line.
    Staring to think I need to upgrade to v5.5 - but not convinced it is the right thing to do.
    Thanks again guys,
    Noel

  • IView preview works, but not when launching from a role

    Hi Everyone,
    I'm sure this is a quick fix for all gurus out there.
    I created a new iView which launches a PDF.  When I preview the iView, it brings up the PDF just fine.  I have saved this PDF under the Content Management folders, and defined my iView with the path defined as:
    /documents/.....
    I have not included the full http://hostname URL, as I do not believe I need to.
    When I assign this iView to a role, and try to click on this iView from the role, I receive the following browser error message, and my PDF does not come up.
    The webpage cannot be found
    HTTP 400 
       Most likely causes:
    There might be a typing error in the address.
    If you clicked on a link, it may be out of date.
       What you can try:
         Retype the address. 
         Go back to the previous page.
         Go to  and look for the information you want. 
    Can anybody tell me what I am missing?
    Thank you for your help,
    John

    Hi John,
    If you portal version is EP 7.0 SP18 , above suggested note mentioned by you will fix the issue .
    One alternative :
    Try to set document iview property to open into new window rather than portal content area.It should work.
    Permenent fix will be with sap note mentioned by you already.we already applied fix and it is working well.
    Regards,
    Koti Reddy

  • First Play at Preview ok, but not working correctly when Video started from DVD

    Hello
    I created a Project with Encore CS5.1. When i test via the "preview" button (disc symbol) everything works fine.
    When i export the Project to a DVD the Video starts directly with the Main Menue although i expect starting with the intro clip. As i said with encore preview everything works fine.
    Has anybody an idea how to solve this issue?
    Thanks in advance
    Rene

    Hi Bill and John
    Thank you for your feedback.
    Attached i'll send you a screen shot of the flow chart and the specs.
    I just created a new project with only the "Vorspann - Trailer" and the Main Menue. All other links are not created yet.
    With the preview everything is ok but if i create an image the video starts directly with the Main Menue.
    Kind regards and thanks again.
    Rene
    With preview ok
    Crate an image or DVD > video starts with direct play of the main menue

  • Artist/album names missing when adding folder (but not all of them)

    Yesterday I found iTunes couldn't locate the folder where I store MP3 downloads - ie. I got the dreaded '!' alongside most tracks. When I used the Add Folder command I ended up getting a duplicate of virtually every track.
    However most of the duplicate tracks were only shown with the track number on the original album plus about 12-15 characters from the title (ie. character string used as a label for the MP3 file). There was no detail of the artist or album.
    Given the large number of duplicates involved I decided to clear out the library and have just used Add Folder. Same outcome - 1/3rd of the tracks described in full; the other 2/3rds just show track number and some of the title.
    Suggestions on (a) where I'm going wrong; and (b) whether I can use contents in the Previous iTunes library folder to recreate the library would be greatly appreciated. Many thanks.

    As I've already said this question has been answered maybe no one is monitoring this topic but ... I've just worked out the reason the detail is missing is because the tracks which have limited detail are in WAV format.
    This is where I am completely lost because they have all been downloaded from the iTunes store or from Amazon as MP3 files, and I'm not aware either of the download functions comes with an add-on called "automatically convert to WAV".
    The irony is that this is quite convenient but if anyone can provide an explanation of how it is occurring then I would be interested to hear because I can't figure it out. May still trust my sanity, but not my memory!

  • PDF images visible in Adobe but not Preview or Mac Mail's Quick Look

    I have a PDF that I am inserting an ad into. I copy and paste the ad from one PDF into another. The problem I am having is when I have the final 10-page PDF with the ad inserted in it, you can open the 10-page PDF in adobe and the ad will be visible, but if you open it in Preview or using Mac Mail's Quick Look, the ad isn't there. When I open the original file with the ad in it (that I copied and pasted the ad from) in Quick Look or Preview, the ad appears. I need to know why the ad isn't showing up after it is copy and pasted into a new PDF?
    files can be viewed below or at this address:
    http://6letters.com/help/
    "lanai3_Grand Jewels-001Winning.pdf" is the document I am copying the ad from
    "lanai_122211.pdf" is the document I am pasting the ad into. The ad is on page 10. The ad is viewable in Adobe Acrobat but not in Preview or Mac Mail's Quick Look.
    I am using Adobe Acrobat Pro 9 (version 9.4.6) to do the copy/paste/save.
    I just clicked the above link and the ad doesn't show up online now either. It is supposed to be in the blank space on page 10.
    Any help much appreciated!!!!!!

    Hi,
    Acrobat 9 and older versions paste images as a stamp/comment which (that poorly functional) Preview cannot see, so you need to "flatten" the page if you want to see a pasted picture in Preview.
    (Preview, Mail and QuickLook shares the same rendering library)
    You can easily flatten one or several pages in a PDF using this free tools: http://abracadabrapdf.net/articles.php?lng=fr&pg=717

  • When printing slides with notes, only notepart shown on screen is included

    Hi
    I make presentations with really long presenters notes. During presentation I can scroll the presenters notes on screen with U and D, but my problem is when printing the slides with notes, only the part of the notes that is shown on screen is printing, so I sometimes half of the note section on a slide.
    Is there a work around, or is it just the way life is?
    Thanks in advance.

    I too am having the same issue. I am trying to print out a monthly calendar like I see on the screen. At the most on any given day I have 4 lines of text. It shows on the screen but when I print it puts 3 little dots above that particular day to let me know there is more to it and refuses to print more than 3 items. I have tried with different page set ups and all I am doing is wasting ink. What's worse, is that there is PLENTY of room left on the paper. There is so much room between the month label and where the calendar starts there certainly has to be a way to adjust this. (I would hope!) Anyone please help! Thanks in advance.

  • Bridge opens Raw thumbnails but not Preview?

    In Bridge I can open Raw files from my Canon 6D as thumbnails but not as the large Preview. The files will open in Camera Raw 8.1 with no problem. I have Photoshop CS6 13.0, and Bridge 5.0.0.399. I am on a Mac Pro OS 10.8.4
    What can I do?

    Thanks Curt. Went to Downloads, then to Product updates and there I found updates for all Adobe products; clicked on Bridge for Macintosh and downloaded 5.0.2.4; then clicked on Photoshop for Mac and downloaded CS6 version 13.0.4 (didn't have 13.1??). Everything is working properly now. And I have learned how to find updates at Adobe! Thanks again.

  • Clear classloader when exit applet, but not browser

    Hi there,
    I've got some problems with the classloader.
    when i start my applet with the language de, it will correctly name the buttons etc. in german.
    in my site it is possible to change the language. after clicking on another lanuage, my applet
    restarts with the correct parameters (language=en), but the buttons and so on are still named in
    german.
    i figured out, that after clearing the classloader cache, the language is the correct one.
    how can i clear the classloader cache when i leave the applet, but not the browser?
    thanks in advance!

    Hi there,
    I've got some problems with the classloader.
    when i start my applet with the language de, it will correctly name the buttons etc. in german.
    in my site it is possible to change the language. after clicking on another lanuage, my applet
    restarts with the correct parameters (language=en), but the buttons and so on are still named in
    german.
    i figured out, that after clearing the classloader cache, the language is the correct one.
    how can i clear the classloader cache when i leave the applet, but not the browser?
    thanks in advance!

  • Computer restarts when left on, but not asleep

    I'm not sure if this is the right place to ask this, but I did some searching and couldn't find anything close. I need to leave my computer on (ie, not asleep) to keep Azureus(a bittorrent program) connected to the internet. But every time I leave my computer on, with the cover open, a few hours later it has restarted and is at the login screen. I have the system preferences set to not shut down the hard drive and to never sleep, but to turn on the screen saver after fifteen minutes and to put the display to sleep after 30 minutes.
    So I have two questions. Is there a way to keep Azureus connected to the internet while the computer is asleep? Or is there a way to leave the computer on but not asleep without having it constantly restart?

    Welcome to the Apple discussions.
    You posted in the Powerbook discussion area, and your tag line says iMac G4 .... if your question is on the iMac, you might also want to post it in that discussion group at http://discussions.apple.com/category.jspa?categoryID=132. That said, most of what follows is applicable to either system.
    I don't use a screen saver, rather, the display just goes to sleep after 10 minutes. I let my hard disk sleep, which doesn't impact the ability of the system to stay awake and functional.
    Azureus, or any other program, won't work when the computer is asleep.
    Having the system reboot itself is odd. You might want to delve into the console log to see if there are any messages before it reboots. On the energy saver panel, do you have 'restart automatically after a power failure' checked? If so, you might want to uncheck it.
    You might want to try a different bittorrent client, too. I like Transmission. It doesn't have the graphics that Azureus has, however, it works like a champ. You can find it at http://transmission.m0k.org/download.php
    Another step you might consider is resetting your power management unit (PMU), as settings can get jumbled over time. See this Apple note on Powerbook PMU reset: http://docs.info.apple.com/article.html?artnum=14449 . iMac PMU reset is http://docs.info.apple.com/article.html?artnum=95165
    Has this only happened while on OS X 10.4.2? If yes, consider upgrading to a newer release.

  • Task Sequence fails on "Apply Driver Package" when PXE-booting but not with bootable media

    I have an issue where my Task Sequence fails during 'Apply Driver Package' when PXE-booting but works ok when booting from CD or USB-stick. It fails withe error code 0x80070002 and when pressing F8 and checking the ipconfig there's a 169.254.x.x address.
    Somehow it looses it's real ip during the process.
    I'm grateful for any advice!

    Please enable verbose logging for Task sequence, then upload the smsts.log to Skydrive.
    0x80070002 error is too generic, which cannot be used to determine the cause.
    Juke Chou
    TechNet Community Support

Maybe you are looking for