*Full page bleed

I have my printer (Epson 300) set for full page printing and it will print that way in CS5. In LR3 I cannot get it to print full page. The bleed space at the bottom of the page is 1/2" and I cannot (in custom moode) move a cell into that bottom 1/2". How can I change this to be able to use that space?
Thanks much for your help,
Al

Maybe you have already done this. But in the Print module you need to set all of the margin sliders to 0. Then you need to go into Page Setup (button in the left-hand panel) and choose the appropriate printer settings. Also, in the right-hand panel under Image Settings, be sure to check the option, "Zoom to Fill".

Similar Messages

I need a full page bleed for an image!

I've tried just about everything to figure this one out, but I'm starting to suspect the feature is just not available. I'm working on a book and will self publish it, so I need to put the illustrations into the body of the work. Which isn't hard to do, but I need the image to bleed into the margins, basically span the entire page. The only way I can seem to do this is to eliminate the margins entirely, but of course I need the margins for the text. So, is there a way to eliminate the margins just for the image?
While I'm here I might as well address the other issue I'm having: I need to save an image at 300 DPI but I constantly have problems getting the size right if I do so. I know the max pixels is 2000, but for printing specs I need the cover image for the book to be 6.25x9.25, which comes out to 1875 x 2775 pixels at 300 DPI. Perhaps Appleworks is not the program to do this in, but unfortunately my old iMac has no room for larger programs. Hmm.....Any suggestions?
Thanks!

Hi Paul,
On a typewriter, you'd call then the Margin stops.
If you want to eliminate the headers on pages with pictures, try this addition to Yvan's suggestions:
For the first page where you want a picture, put a section break at the end of the previous page, then go Format > Section...
Set the section to begin on a New Page, and Click the checkbox for Title Page. Click OK.
After inserting the picture, don't use a Section break to move to the next page. Press enter to insert a Column break or shift-enter to insert a Page break (both have the same effect in a single column document).
For each new picture, insert a section break at the end of the page before. The new section will start on a new page, and the headers and footers will be suppressed on this 'Title' page.
Regards,
Barry

Correct Size for Full Page Bleed

I'm using 8.5x11 custom Photoshop images for my entire hardcover book. What is the ideal size to use? Should I add some cropping area to each edge to get a correct bleed? (i.e 8.7 x 11.2, etc)
Thanks!

If you are using standard 3:4 ratio digital photos they bleed just find for me - I have a number in my book and they are all perfect
Just make sure you have adequate resolution - 1530 x 1980 or larger
LN

Indesign: full page with bleed?!

Hi all, if i'm given an specific ad size of only:
- Full Page with bleed - 8 x 10.5 (inches)
- Non bleed size - 7.25 x 9.8 (inches)
Does it mean:
- page size: 8 x 10.5 (inches)
- bleed & slug: 0
- Margin: 0.375 (inches) for all sides
i'm puzzled if there is a need for trim area if there isn't any measurement provided..
Hope someone could help me out please?!

(Wow, I said "marginally more likely" -- no pun was intended, but I think it's pretty funny!!)
Manish (do you work for Adobe?) wrote:
In the Post there are 2 size :
Full Page with bleed - 8 x 10.5 (inches)
- Non bleed size - 7.25 x 9.8 (inches)
The second is without bleed and the first one with it hence we can know the bleed size from it. Can't we.
So, the whole point of a bleed is to define three regions: 1) the interor space, bounded by the margin, where you're guaranteed to not come near to the trim, 2) the bleed area, which is a danger zone; once a page object touches this area, it is danger of being trimmed, but it might never happen 3) the actual trim area (and slug), where we're guaranteed the content will be cut off.
If we were to just subtract the provided 7.25x9.8 from the provided 8x10.5 and say that our bleed area was 3/8" on a side, then that would mean if we put an image touching the margin, it would be touching the bleed area. That doesn't really make sense. Because the standard practice with bleeds is if you touch the bleed line, then you should go all the way to the trim line.
The other reason this doesn't make sense is that 3/4" is 9.4% of 8". That is a lot of page to waste on a bleed. And, indeed. 3/8" is a rather large amount for a bleed, at least at these sizes. (If you were cutting billboards, different story...).
Oh, and also, knowledge of magazine layouts gives us some more information, as Peter mentioned. It's quite common that a full page ad is allowed to bleed all the way, but otherwise all content on the page (advertising as well as Real Content) is kept within a margin, like 3/8". So there is a 3/8" border between the page edge and any content.

Spread image across two pages and print the full pages

Hi there,
Im having a bit of trouble with InDesign CS3.
I want to place an image across two facing pages but can't seem to make it go further than one page.
Also I want to figure out how to print full pages, currently I am only able to print what is contained in the pruple bounding box on the page, any part of the image outwith this is cropped off leaving a white border on the page - this isn't an issue for all but my title page and this two page image I require.
Any tips.
Cheers
malc

I don't understand the inability to place an image that spans two pages (not that I necessarily think this is a good thing to do under most circumstances, but that's a different discussion). Can you see both pages in the same spread? How about providing some details about what you are doing, and maybe a screen shot showing what's happening. Perhaps you're using a frame on the master page?
The second part sounds like a printer issue, but that's hard to know without knowing what your "purple" guides (presumably the page margins) are set to. Most printers are not able to print to the edge of the sheet of paper, regardless of what might be included on the page, so you get a white border that will vary in size depending on the printer model. Generally speaking, to print a bleed you must extend the items beyond the page edge (to insure there is no white edge left fom misaligment in the cutter) and print on a larger sheet, then trim to finished size.

XML Publisher report output in RTF format does not display full page

Hi,
We have one XML Publisher report, the output of report in RTF format is not getting displayed in Full Page in normal way (MS Word -->View menu --> Print layout) but we can see full page display when we do MS Word -->View menu --> Outline.
Appreciate your valuable inputs on this.
Is this a template issue or any profiles needs to be set.
Thanks
Vijay

Do you have any header and footer on your template?
If you have any header and footer then try to adjust it as of to display full page.
Thanks
Yasar

How can I print just a part of the page and not the full page with Adobe Reader v 10.1.2?

how can I print just a part of the page and not the full page with Adobe Reader v 10.1.2? I need to print a engineering print with lot of information but information is too small in letter size and I don't have a plotter.

Two ways to print a portion of a page: zooming or using the Snapshot Tool.
ZOOMING:
Zoom into the area you want to print.
Click the Print icon.
Under "Pages to Print", make sure "Current view" is selected under "More options" (you may need to click "More options" to open it).
If you aren't satisfied with the preview, try clicking "Fit" under the Size button.
SNAPSHOT
Choose Edit > Take A Snapshot.
Drag a rectangle around the area you want to print.
Click the Print icon.
Under "Pages to Print", make sure that "Selected Graphic" is selected under "More options".
To enlarge the snapshot to fit the sheet of paper, choose "Fit" under the Size button.
Hope this helps!

IView is not being displayed in full page

I created one iView, added it into a page. I set the layout as 1 Column Full width. My view is not being displayed in entire window. What kind of property, I should set in the page.

Sunil:
By default, the iView's height property is fixed. After I changed iView's height property to Full page, The page displays correctly.
I setup two views in one page using one column Full width. Both the iviews are setup in one page. Now both the iViews height is set up to Full Page as well as page's height is setup to Full page. Now, the Top iView is being displayed with 3/4th of window size and bottom iView is being displayed with 1/4th of window size. I want to display both of them with equal size.
Thanks for your help.

Full page prints from iPhone but not from iPad using photo app with AirPrint ?

Full page prints from iPhone but not from iPad using photo app with AirPrint ? iPad only prints 4x6 on full size paper. It's an HP 8600.

I also have this problem printing photos from an iPad to an Epson WF-2540 printer. It prints only 4x6 and without border (so print starts at extreme top left corner of paper). Borderless printing is not selected on printer. Printing a square photo just crops to 4x6 size.

I am trying to print a passport sized headshot and I get a full page photo. How to I print out a smaller size?

I am trying to print a passport sized headshot and I get a full page photo isntead. I downloaded the shot from i photo and chose "small" but it didn't help.
I also cropped the photo on iphoto to the dorrect size but no difference. I have a Canon MX 870 printer. Please advise.

In iPhoto select the photo and print - select the paper size and a custom print size (2x2 i believe for passports) and print
LN

I am trying to remove two full page black borders from my Pages document and when I click on them they are greyed out

I am trying to remove 2 full page size black borders in my pages document and whn i click on them they show greyed x's but i cannot manipulate or remove them. What to do?

John,
While the grayed x corners are showing, Arrange > Unlock.
Now you will be able to manipulate or delete the borders.
Jerry

PDF document not full page but need to print it as a full page

Hi,
I have a pdf document which is 15 cm by 8 cm and need to print it as a full page without the white border making up the full page. How can I do this?
The document was created in publisher and saved as a pdf.
I am reading the document from Adobe Reader on a Windows XP machine.
Thank you for any help any one can give.

Do you have a printer that can print pages without a white border?
Very few printers can do this.
Aandi Inston

Two questions: Event on a Date Picker and Read Only on a full page?

Hello,
I make use of this very informative board to develop an application but i have been unable to find info on these two topics. Sorry if it has been already discussed extensively.
Using HTMLDB 2.2 for now.
=>First question:
I have a date picker item with an event
onChange="resaStatusChange();"
in the HTML Form Element Attribute field.
The event is triggerring if i put a new data in the field but does not trigger if i use the picker.
Is it a standart behaviour? Is there a way to trigger the event when new data is provided through the date picker?
=> Second question:
One page in my application has to be used either to only display information or as a mixed displaying/entering data sheet.
When the context is appropriate to use the page as a simple display (testing both global authorization and data to be displayed), is there a way to put a read only attribute on the full page instead of putting the read only conditions through each and every item of the page?
Sorry if the questions are not clear and apologize for what should be newbie questions.
Any link or info will be appreciated.
Regards,
Daniel Gureghian

Hi Daniel,
I'm not sure about your first question, but I can hopefully give you a helpfull answer for your second one.
I'm handling it this way:
var elInput = document.getElementsByTagName('input');
var elTextArea = document.getElementsByTagName('textarea');
var elSelect = document.getElementsByTagName('select');
for (i = 0; i < elInput.length; i++)
setReadOnly(elInput, true);
for (i = 0; i < elTextArea.length; i++)
setReadOnly(elTextArea[i], true);
for (i = 0; i < elSelect.length; i++)
setReadOnly(elSelect[i], true);
function setReadOnly(pThis, pRead)
     if (pThis && pRead)
          pThis.disabled = pRead;
          pThis.style.emptyCells = "show";
          pThis.style.color = "black";
          pThis.style.backgroundColor = "#DDDDDD";
     else if (pThis && !pRead)
          pThis.disabled = pRead;
          pThis.style.emptyCells = "show";
          pThis.style.color = "black";
          pThis.style.backgroundColor = "#FFFFFF";
I never used it on a whole page, only for regions. So maybe you have to make some changes.
chrissy

Report output not using full page.

I have a report that does not use the full screen to display. The output display on about a 1.5 to 2 inch section of the page and the rest is white space. How do I get it to use the full page?

Hi Raymist123,
If I understand correctly, the issue which you occurred is that the report content only displayed about 1.5 to 2 inch. As per my understanding, I think this issue is caused by the report content including all the report items (table, matrix, list, chart,
gauge, text boxes etc.) is only occupied 1.5 to 2 inch on the report design surface. If in this case, we can try to expand the sizes of all the report items to fix the issue. And please make sure that the PageSize of the report have set to 8.5 x 11.
If this issue is still existed, could you please post the screenshot about the design surface and the all the size properties? Then we can make further analysis.
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Report cannot print in full page

Hi all,
I have generated the report and when view on screen, the format is ok but when submitted to printer, the report output does not show in full page, right hand side of the paper is blank off.
I am using report v.6.0.8.25.0
Rgds
Lim

Hi,
Under Report Builder directory you will find one directory which contains printers file with extensions of PRT, check the setting their.
Thanks
Shishu Paul

*Full page bleed

Similar Messages

Maybe you are looking for