Full Pages with Zero Margins

I'm trying to use Pages to format and print labels for various products on a Phaser 8200 printer.
Previously I had used Word, but I'm trying to convert over to Apple software.
The problem I'm having is that I format the labels as tables, with the table taking up the entire 8.5" x 11" page; with each label being an integral fraction of the page size in width and length.
I've set the top, bottom, left and right margins, and header and footings to zero in the Document
Inspector, but I still end up with top and bottom margins of about 1/4". How can I get rid of these?
I realize there are other ways to format the labels, but that's beside the point. I want the labels to take up the whole page. I don't want to have to cut off the top and bottom 1/4" of the paper, and I don't want to have to jigger the content of the labels so that the content of the top row of labels 1/4" up to counteract the margins (and shift the bottom row down 1/4").

JimBaranski wrote:
I've set the top, bottom, left and right margins, and header and footings to zero in the Document
Inspector, but I still end up with top and bottom margins of about 1/4". How can I get rid of these?
How did you do that?
On my system I must set the height of header/footer to zero then uncheck header/footer.
My guess is that you set the heigt to zero but didn't uncheck the box or that you uncheck the boxes without zeroing the heights.
This tip was described several times.
+-+-+-+-+-+-+-+-+
Worried Life Blues 2008
+4. Discussions+
+Apple Discussions, launched in August, 2000, have grown rapidly in usage and features. The main features include personalization, subscription capabilities and email capabilities. _For information on how to use Discussions, please visit the Discussions Help Page_. Cookies should be enabled and an Apple ID account is required if you would like to contribute to the discussions.+
+Entering the Help and Terms of Use area you will read:+
+*What is Apple Discussions and how can it help me?*+
+
Apple Discussions is a user-to-user support forum where experts and other Apple product users get together to discuss Apple products. … You can participate in discussions about various products and topics, find solutions to help you resolve issues, ask questions, get tips and advice, and more.+
+_If you have a technical question about an Apple product, be sure to check out Apple's support resources first by consulting the application Help menu on your computer and visiting our Support site to view articles and more on our product support pages._+
+*I have a question or issue*—+
+how do I search for answers? _
It's possible that your question or issue has already been answered by other members so do a search before posting a question._ On most Apple Discussions pages, you'll find a Search Discussions box in the upper right corner. Enter a search term (or terms) in the field and press Return. Your results will appear as a list of links to posts below the Search Discussions Content pane.+
+Search tips are available here:+
+http://discussions.apple.com/help/search-tips.html+
+-+-+-+-+-+-+-+-+
Yvan KOENIG (from FRANCE mardi 5 août 2008 19:18:13)

Similar Messages

Indesign: full page with bleed?!

Hi all, if i'm given an specific ad size of only:
- Full Page with bleed - 8 x 10.5 (inches)
- Non bleed size - 7.25 x 9.8 (inches)
Does it mean:
- page size: 8 x 10.5 (inches)
- bleed & slug: 0
- Margin: 0.375 (inches) for all sides
i'm puzzled if there is a need for trim area if there isn't any measurement provided..
Hope someone could help me out please?!

(Wow, I said "marginally more likely" -- no pun was intended, but I think it's pretty funny!!)
Manish (do you work for Adobe?) wrote:
In the Post there are 2 size :
Full Page with bleed - 8 x 10.5 (inches)
- Non bleed size - 7.25 x 9.8 (inches)
The second is without bleed and the first one with it hence we can know the bleed size from it. Can't we.
So, the whole point of a bleed is to define three regions: 1) the interor space, bounded by the margin, where you're guaranteed to not come near to the trim, 2) the bleed area, which is a danger zone; once a page object touches this area, it is danger of being trimmed, but it might never happen 3) the actual trim area (and slug), where we're guaranteed the content will be cut off.
If we were to just subtract the provided 7.25x9.8 from the provided 8x10.5 and say that our bleed area was 3/8" on a side, then that would mean if we put an image touching the margin, it would be touching the bleed area. That doesn't really make sense. Because the standard practice with bleeds is if you touch the bleed line, then you should go all the way to the trim line.
The other reason this doesn't make sense is that 3/4" is 9.4% of 8". That is a lot of page to waste on a bleed. And, indeed. 3/8" is a rather large amount for a bleed, at least at these sizes. (If you were cutting billboards, different story...).
Oh, and also, knowledge of magazine layouts gives us some more information, as Peter mentioned. It's quite common that a full page ad is allowed to bleed all the way, but otherwise all content on the page (advertising as well as Real Content) is kept within a margin, like 3/8". So there is a 3/8" border between the page edge and any content.

How can I print just a part of the page and not the full page with Adobe Reader v 10.1.2?

how can I print just a part of the page and not the full page with Adobe Reader v 10.1.2? I need to print a engineering print with lot of information but information is too small in letter size and I don't have a plotter.

Two ways to print a portion of a page: zooming or using the Snapshot Tool.
ZOOMING:
Zoom into the area you want to print.
Click the Print icon.
Under "Pages to Print", make sure "Current view" is selected under "More options" (you may need to click "More options" to open it).
If you aren't satisfied with the preview, try clicking "Fit" under the Size button.
SNAPSHOT
Choose Edit > Take A Snapshot.
Drag a rectangle around the area you want to print.
Click the Print icon.
Under "Pages to Print", make sure that "Selected Graphic" is selected under "More options".
To enlarge the snapshot to fit the sheet of paper, choose "Fit" under the Size button.
Hope this helps!

Hello,is there a way to make a word processing document in pages with 1" margins because at the top of page it has more than 1", and can the box at the top be deleted

hello, is there a way to make a word processing document in pages with !" inch margins? i ask this because there is a box where you can write text and the you start your document, but it takes more than 1 inch from the top, can that box be removed? and why whatever you write in the box appears in every page of the paper? is there a way to avoid this? sorry I do not use computers very often and i just want to write an essay for my english clss, thanks for your help.

The box is called Headers and is used for thing that will be repeated on several pages like page numbering and names etc.. You can uncheck it in the Inspector > Document tab

How can I scroll one full page with IntelliMouse Optical?

When I nudge my scroll wheel one notch forward or back, Safari moves 1/2 of a page up or down. How can I get one nudge of the scroll wheel to move one full page? Firefox has an add-on that can be set to a full page. What are the options for Safari?
The latest Microsoft Intellipoint software (for mac) that comes with the mouse seems to have messed up my scrolling in Safari and Navigator.
I've tried USB Overdrive, playing with settings in system preferences, etc, nothing helps. In Intellipoint I created a Safari preference and set it to scroll one full page, but it doesn't.
Any ideas? thanks
p.s. Please don't tell me to get another mouse, I've tried dozens of them and IntelliMouse Optical is the best one for me. (I'm also stuck on an ancient Apple M2980 keyboard. I love them.)
Safari 4.0.4
IntelliMouse Optical
Mac Pro 2X-Quad-Core Intel Xeon 2.8 GHz
OS X 10.6.3
Memory: 6 GB
ATI Radeon HD 2600 XT

HI,
Open System Preferences/Appearance.
You may be able to tweak the scroll functions that way.
Carolyn

Officejet Pro L7680 won't print full Page from Win 8.1

Installed driver for this printer on a 64bit Dell XPS running 8.1. The data on the computer says the installation is satisfactory.
The printer printed a full page fax report and self diagnostic page. But when prining a full page from Word, or the internet it will only print about half a page. then it may stop, or it may print a series of pages with a few characters on them. The print queue says that all of the data has been transmitted to the printer. It will print a full page with little content, like a row of x's at the top of the page, a row in the middle, and a row at the bottom. It also prints a full page from excel if the spreadsheet contains only a small amount of data. The same printer prints, faxes, and scans satisfactorily from an older computer running XP. What can I do to the driver to have it print full pages? Printer model no is C8189A, serial No {Personal Information Removed}

I have same problem, hope someone answers.

How can I create a full page on Adobe Muse (without side space)?

How can I create a full page with Adobe Muse (without side space)?

Muse uses Fixed width Layouts so that is not 100% possible. You can extend images and box elements to full width but not actual content.

Full page prints from iPhone but not from iPad using photo app with AirPrint ?

Full page prints from iPhone but not from iPad using photo app with AirPrint ? iPad only prints 4x6 on full size paper. It's an HP 8600.

I also have this problem printing photos from an iPad to an Epson WF-2540 printer. It prints only 4x6 and without border (so print starts at extreme top left corner of paper). Borderless printing is not selected on printer. Printing a square photo just crops to 4x6 size.

Magic Mouse question. I have set this in Preferences by ticking Swipe between pages with one finger and also Swipe between full-screen apps with two fingers, however when I try to do the latter, the 2 finger swipe will take me only to the dashboard and

It's a Magic Mouse question. I have set this up in Preferences by ticking Swipe between pages with one finger and also Swipe between full-screen apps with two fingers, however when I try to do the latter, the 2 finger swipe will take me from the app that I am on to the dashboard only and not to my other open apps.
I also find that Smart zoom only works with some apps, for instance not with Word docs or email.
How can I correct this please?

Just figured out it also does not work with the Mail app.

Only the first page is printed reduced as setup. All pages afterward are full size with information cut off. Recent problem. Can print from Safari just fine. How can I get all pages to be reduced size?

Question
Printing internet pages
Reduced print size
Only the first page is reduced and printed as desired
All pages after the first page are full size with information cut off
Recent problem never seen before
Can print from Safari and other software just fine
How can I get all pages to be reduced size?

One suggestion worked from the Firefox prints incorrectly link mentioned above by mha007. I'm thrilled since this has been annoying me for weeks. Thanks mha007!
Reset all Firefox printer settings
# Open your profile folder:
# On the menu bar, click on the Help menu and select Troubleshooting Information. The Troubleshooting Information tab will open.
# Under the Application Basics section, click on Show in Finder. A window with your profile folder will open.
# Note: If you are unable to open or use Firefox, follow the instructions in Finding your profile without opening Firefox.
# On the menu bar, click on the Firefox menu and select Quit Firefox.
# In your profile folder, copy the prefs.js file to another folder to make a backup of it.
# Open the original prefs.js file in a text editor (such as TextEdit).
# Remove all lines in prefs.js that start with print. and save the file.
# If something goes wrong when you open Firefox, close it again and overwrite prefs.js with the backup you made.

Outgoing payment with Zero amount when Full adance is paid

I am making A/P down payment request based on purchase order, then I make full payment of PO (full advance payment - no amount of payment left with) through "Outgoing payment" which creates negative amount in Business partner balance and shows a negative entry in "outgoing payment" screen. Moving further, I make Goods receipt PO and then I make A/P invoice of regular amount based on goods receipt PO / Purchase order.
Up till now, the full payment has been made in advance through A/P down payment request and upon receiving goods the A/P invoice of regular amount is received. Now when I go to "outgoing payments" I have no amount left to pay (i.e. It displays 2 entries of same amount, one with positive amount of A/P invoice and the other one with negative amount of A/P down payment request to show the due balance = zero) So I am trying to clear the vendor "outgoing payments" by paying with Zero amount, but the system shows the error "The confirmation amount should be greater than Zero".
How can I clear the vendor "Outgoing payments" with zero amount ?? as it's payment has been made in advance.
Note: Please give me the solution by keeping in mind that I have to pay full amount in advance.
Solution to this problem would be highly appreciated.
Thanks and regards,
Farhan Sufi

Hi Farhan Sufi,
For Cases where full Advance is paid initially, You Follow these procedure, I have tested in my DB its working fine.
Step 1: Raise a Purchase order Say Rs 1000/-
Step 2: Raise a GR(PO) of Rs 1000/-
Step 3: Go To A/P Down Pmt -
Select the Vendor -
Say copy from GR(PO), And select te One you wanted. At the bottom in the DPM Field give 100% and Add the Document.
Step 4: Raise Out Going Payment by linking to the A/P Down Pmt what you have posted. ie., Go To Out Going Pmt Screen---Select the Vendor, This will display all invoices, Down pmts, Credit Memos, and JE's. Select the A/P Down Pmt what you have posted and go to payment means fill in the respective field and add the document.
Step 5: Go To A/P Invoice Screen, select the vendor. And click on Copy from GR(PO), Select the respective GR(PO) document.
And At the Bottom double click on Total Down Payment Button, This will display the list of all Down Payments for which Out going payments are also posted. Here Select the respective Down payment and add the document.
When you add this A/P Invoice document gets added and the status of the document will be closed. As you have made full payment in the A/P Down Payment Screen.
And This Invoice will not appear in the Out Going Screen as the document is closed.
Cheers,
Sree.

Flow full page graphic with text

Working on a 200+ pg book in InDesign CC 2014. I need to place some PDF Charts that the client wants to appear on a full page, near where the text references it–so, for example, if the left hand page refers to the chart, the chart would be the full right hand page. I know how to do in-flow/anchored object, but if I insert it into the spot where the reference is, since it's full page it doesn't fit and the copy would stop at that point and continue after the inserted object. I want the copy on the left to continue down the page, but have my PDF somehow be anchored to the next page so that as additional text gets added earlier in the book, I don’t have to manually move the charts. The charts can be on a left or right page, but they all take up a full page. I tried one set as an anchored object with the PDF frame set to text wrap and and it sort of worked, but if there needs to be more than one reference on a page, ID won't let the next frame be offset to a page not on the spread.
Hope this is clear and any suggestions, instructions, appreciated.
Jeff

Hi,
Would you like to share us some screenshots? They will help us understand your request more cleanly.
If you have any update, please feel free let us know.
Regards
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

I'm writing a report and need a title page, so I want the auto-numbering to start with the second page. So the title page is zero and the next page will read "1"

I'm writing a report and need a title page, so I want the auto-numbering to start with the second page. So the title page is zero and the next page will read "1" How do I do this?

Hi H4S,
Click at the end of the Tile page.
Menu > Insert > Section Break.
Click in the second Section. Insert a page number in the Header or Footer.
Inspector > Layout > Section:
Regards,
Ian.

Run program in background spool is generated with zero page

Dear all,
I am new in abap. I change existing program and add SED column if I give the input and run that program in foreground I will see ALV output but when in same input same program I run in background spool is generated with zero page report is too heavy that is why I want to run it in background but I canu2019t.
regards
shahid

shahid,
goto SM37, select your job, then in command bar type JDBG, press Enter. it will debug the back ground job, and you can check why you didnot get an output.

Adobe Form : Printing with Zero pages

After Upgrade ECC6.0 to EPH5 Adobe form is not printing,bu print preview is working, while printing it is creating spool request with zero pages.
Please help, Thank you in advance.

Hello Rajitha,
Check the print parameters once...
Try printing any standard form using standard program, and check whether it is behaving the same way.
Thanks,
Rakesh

Full Pages with Zero Margins

Similar Messages

Maybe you are looking for