Full picture photo shooting details does not show up

Hi everyone,
Normally when I shot a photo and in the photo viewing mode I can select "details" to see the full details of the captured photo such as shutter speed information. However, recently I found that the information does not show in full like in the past. The shutter speed an some other details are diappeared.
How can I bring this back
Methee
Solved!
Go to Solution.

@alexdon thank you for your advice 
I have tried it in safe mode but still the details of the captured photo does not show in full. I have attached a screenshot with this post which you can see that the details are very short. 
Also, I have tried also a factory reset but it does not work at all. Possibly the PC Companion repairing that I did it last time might had some unknown error due to my home Internet connection was not stable. So, the PC companion repairing version of software might be permanently modified into the factory software. So the the factory reset does not work.
Anyone has the same problem like me? or it is normal with the current Sony updated software. I am sure last 2 months ago when I bought Z3 it was not like this. And this is an annoying problem for me as I always use Z3 camera in manual mode and always make use of the first picture shooting details such as ISO, speed shutter, etc for re-shooting a second better photo. 
Anyway, I will do a PC companion repairing again tomorrow morning, then I will post a result
Below is the screenshot that  I shot a photo in safe mode using manual camera mode at 20.7 MP, auto ISO
Then I openned the gallery in safe mode and see the details of the captured photo. You can see that there is almost no important details.
There are only the width and height and then the flash is on or off.
Thanks Alexdon
 And soory if my English is not good!
Methee

Similar Messages

  • How to refund to a buyer when paypal details does not show a refund link?

    How to refund to a buyer when paypal details does not show a refund link?

    Yeah, I understand, there is so much more to communication than words on paper.Folks interpret written words according to a whole lot of complicated emotions and feelings. We then project that onto the author and decide why we think they formed that particular combination of words.It is certainly far from perfect.What is missing is volume, intonation, body language, facial expressions, etc. Emoticons are a very big help.I am sorry that you interpreted my tone as abrupt. It was certainly not meant to be. I apologize if I have offended you in any way.I admit my lack of pc. I just did not see this as a social atmosphere, which it  really can be.I was just asking for information. I will try to do better in the future.

  • When using the iphone 6 Plus. I use iMessage it is terribly slow to attach photo or take a photo the app does not show camera and slow... like 2 mins at least.

    When using the iphone 6 Plus. I use iMessage and then attach a photo or take a photo... the app does not show the camera fully or even to attach a photo does not work. I have about 8-9000 phones and like 10 short videos in there but it is incredibly slow and almost unable. I have the 128GB iPhone 6 Plus with 46 gb still available. I think this should not be so slow with so much memory still available. Please help. I am using 8.1.2. Yes I have set up the phone as a new phone. Apple store even reformatted this iphone 6 plus 2 months ago but it is still terribly slow Thanks

    Hey Bender1031,
    Thanks for the question, I can definitely understand how frustrating this issue may be with a brand new phone. Great troubleshooting so far by already attempting a restart and reset. If the issue persists, let’s try restoring your device and updating to the latest software (iOS 8.0.2):
    Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/HT1766
    iOS: How to back up your data and set up your device as a new device
    http://support.apple.com/kb/HT4137
    After erasing and setting up as a new device, your device is now in a factory configuration. Test to determine if erasing and setting up as a new device resolved the issue. Content on the device may have caused unexpected behavior.
    - If the issue is still present, you may want to contact Apple Support.
    - If the issue is now resolved, sync one type of content at a time back to the device. For example, if you had an issue playing music, add songs from iTunes and confirm they will play. If your contacts weren't loading successfully, add the contacts back. After each sync, test to see if the issue has returned.
    Thanks,
    Matt M.

  • Google+ photo upload tool does not show thumbnails

    When I use the photo upload tool in Google+, you select the pics to upload, enter an album name or use an existing one, and the upload should start. When this is complete, each uploaded photo should show in a panel so that you can then rotate, delete. This works in IE. In Firefox 24, each photo is just shown as a blue line.
    I have tried Firefox in Safe Mode to no effect.

    Hello in your system details it seems that you have in your [http://kb.mozillazine.org/Profile_folder_-_Firefox#Windows profile folder] a [http://kb.mozillazine.org/User.js_file User.js] file. The user.js file does not exist by default. If you create the file, forget it, if you have not create the file then try to delete the User.js file, to see if the problem goes away (some programs create the file also).
    thank you

  • Photos app years does not show countries

    After updating to iOS 7 I noticed that under the "Years" section, pictures from 2010 to 2012 all displayed the names and number of countries I have visited. However, no countries are listed in the year 2013, beside the heading even though this was the year I travelled to the most number of countries.
    Anybody happen to know how to fix this? The locations of the places I have been to, are shown in the collections and moments sections though. Just not in the years section.

    The App description works for me in the App Store.
    What are you doing?
    Have you tried restarting or resetting your iPad?
    Restart iPad: Press and hold the Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPad. To turn iPad back on, press and hold the Sleep/Wake until the Apple logo appears.
    Reset iPad: Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears.

  • My app requires photo access but does not show up

    My photo editing app requires access to my photos and so I go to privacy settings but the app is not listed at all. I have even gone into Restrictions but it wasnt there either!
    I've restarted my ipad and still nothing!

    I about to tear my already thinning hair out. Philo124, you have saved me from doing this. I have been around in circles, searched the web from dawn till dusk for several days and yet just now in less than 5 minutes, I have problem solved. I can tell you that the Forbidden City in Beijing would have had an Apple IPhone stuffed in a crevice somewhere had my wife not insisted it took good photos.  No not the normal camera on it but Cameara Plus  pro.  Any how, thank you for your sound and helpful knowledge.
    How do I give this the 10 points tick???

  • Photo in directory does not show up in album

    Hi,
    I'm new to PhtoShop and have a problem I can't fix.
    I have copied a photo, using Explorer, into a directory from which an album has created.
    When I do a general search for the photo by name, it appears but when I open the album it is not displayed.
    The photo is not hidden but has no tags.
    I tried "Find items in album", but without success.
    I would appreciate any help in this matter,
    S660117.

    I just realized that I can drag and drop the photo on the album in question.
    Once I did that, it appears as expected.
    s660117

  • Picture saved in Editor does not show up in Organizer

    I recently upgraded from PSE5 to PSE12. The installation went smoothly and my old Catalog was imported without a hitch. After my first test run to edit a file, I did a "Save As" in a version set with the original. I then closed the file, but when I went to the organizer, it was not there. When I go to the folder in Windows Explorer, the edited file is present - I just can't get it to appear (alone or in a version set) in the Organizer. Any ideas? (FYI, I am running Windows 8).

    mdjacket wrote:
    I just can't get it to appear (alone or in a version set) in the Organizer. Any ideas? (FYI, I am running Windows 8).
    It could be that you are saving your edited files in a different folder.  Please check which folder has beend designated under "Watch Folders".  To do this go to:
    Files >> Watch Folders
    See this picture and make sure the red box item is checked on your system
    I have blanked out my username on my Windows 8.1 system but you should have it on your system.
    G/L

  • Photo stream switch does not show up

    When trying to switch on photo stream , I go to settings then iCloud , I give my account data and the rest of the switches (mail, contacts, ....) appear but not the photo stream switch

    I just realized that I can drag and drop the photo on the album in question.
    Once I did that, it appears as expected.
    s660117

  • Photo Editor screen does not show true dimensions at 100% setting

    When a new blank file is created at given dimensions ( say 6 x 4 inches) the actual dimensions  on screen and the ruler appear approx. 1.333 times smaller than the actual size ( 4.5 x 3 inches ) .How can I correct this?

    Computer monitors are made to work with 72DPI whereas printers are capable of printing at much higher DPI. I don't know if you are already doing these, but if you aren't, I would suggest you do the following:
    First check the DPI at which your printer prints.
    While making a new file in PSE Editor, make sure you change the resolution of your image to the DPI of your printer
    while working on the image, instead of making them 100% zoom, zoom them to "Print Size" to get a feel of how large your print is going to be.

  • HT201317 I can not view my shared photo stream.  Does not show in source list. Help!

    I cant view my shared photo stream from my source list.  This is preventing me from adding or removing photos.  Any ideas?

    Old Toad wrote:
    Log out of iCloud in the System/iCloud preference pane and disable Photo Stream in iPhoto's Photo Share preference pane.  Then log back in and re-enable, respectively.  That should jump start Photo Stream in iPhoto if both devices are signed in to the same iCloud account..
    OT
    And it seems you must do this every single time the shared photo stream is updated, ie. photos added/removed.  this is pīss poor.

  • I cannot import photos as Finder does not show the flashdrive. Using OSX 10.9.4

    importing photos from a flashdrive

    Hello ,
    Thanks for using Apple Support Communities.
    Make sure you have the view option for external disks enabled in your Finder preferences:
    OS X Mavericks: Finder preferences
    http://support.apple.com/kb/PH14046
    Take care,
    Alex H.

  • I recently updated to ios 6.1.1 and since then, the photos i am uploading via ios does not show on my timeline or on the newsfeed, but the pictures show in the album. can you help me with it? thanks.

    i recently updated to ios 6.1.1 and since then, the photos i am uploading via ios does not show on my timeline or on the newsfeed, but the pictures show in the album. can you help me with it? thanks.

    fingers crossed, it appears they are working the bugs out of this update....i was able to post a pic to my newsfeeds/time line this morning....first the picture went into the ios album but within a minute, it appeared on my timeline! im glad ...

  • When I try to include a white and black photo in a iMovie the result is a black totaly black picture which does not show in the movie. Why? Can it be fixed?

    When I try to include a white and black photo in a iMovie the result is a black totaly black picture which does not show in the movie. Why? Can it be fixed?

    The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
    Other than that, what version of iPhoto do you have? Assuming 09 or later try
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD
    P.S. Please don't type in block capitals. They are harder to read and on the forum it looks like you're having a tantrum

  • My photo album does not show the pictures I have taken! Any help?

    My photo album does not show the pictures I have taken, they show up on my iMac through iCloud but not on my phone. Also my videos do not show up that I take.

    Did not work. I've selected iMessage to ON and left it. After a few hours I recieved a message "activation unsuccessful. Turn on iMessage to try again". This has been going on for the past 3 days.

Maybe you are looking for

  • Change Margins in pdf file

    I am using Adobe Acrobat Pro version 7.0.8 with a WindowsXP system. I have been sent a manuscript in pdf that has incorrect margins. How do I move the entire script over .25 inch to the left. I have searched the support database and tried to use the

  • Portal logoff:  Need to redirect KM html page

    Hi all, Currently When I click logoff button its rediredt to log in page. But I need to put one KM html page with some message and if user want to re-login i will give one CLICK here for relogin. Im trying to do this through PAR file.  Please some on

  • Set unique entries in child tables?

    Hi, OIM 11g here. I have built a process form with its attached child table for a custom connector i have made. Now i noticed that the child table accepts duplicate entries. How can i make the child table entries unique, as they are in the AD user gr

  • Drobopro ethernet crashes finder

    drobopro ethernet crashes finder . finder freezes up and i have to restart .. drobopro doesnt stay online with ethernet for long

  • Running jmf in eclipse

    I am using eclipse java editor and i have included the jmf.jar and sound.jar files also.My program is perfectly working..When i created .exe file for my whole project and installed in my system..While running,it doesnt find my webcam and microphone..