Full PO print on change version

Hello friends.
When a PO is changed after the initial printout, the change output prints only the changes made, and not the full PO. I know this is the standard way SAP works, but it is a client requirement that the print take the full PO version.
Is there any way we can configure the print to consider the full PO in the change output also for just a few Purchasing Organizations?
Thanks and Regards,
Evandro Miasato

Hi Patilmallinath.
Thanks for the information, but this configuration can not be done by purchasing organization.
My need is that for some purchasing organization we print the PO full version and for some other purchasing organization we print the chnage version.
Is there any way we can do that through configuration?
Regards,
Evandro

Similar Messages

Running Mavericks OS on MacBookPro...had some hard crashes past 24 hours...now can't print in Office or Firefox. Both crash during print dialog - changing printer. Printed fine before. Ideas?

Running Mavericks OS on MacBookPro...had some hard crashes past 24 hours...forced reboots....now can't print anything from Office or Firefox. Both crash during print dialog - changing printer causes instand crash. My system printed fine before the crashes yesterday. I can print from the Stickies app and safari printed fine. I did a full Shutdown/restart and that didn't work. Ideas on how to get PPT files to print again or print from firefox??

Error log from PPT:
Microsoft Error Reporting log version: 2.0
Error Signature:
Exception: EXC_BAD_ACCESS
Date/Time: 2014-03-25 22:12:04 +0000
Application Name: Microsoft PowerPoint
Application Bundle ID: com.microsoft.Powerpoint
Application Signature: PPT3
Application Version: 14.3.9.131030
Crashed Module Name: CoreFoundation
Crashed Module Version: 855.14
Crashed Module Offset: 0x00012192
Blame Module Name: Microsoft PowerPoint
Blame Module Version: 14.3.9.131030
Blame Module Offset: 0x002a285e
Application LCID: 1033
Extra app info: Reg=en Loc=0x0409
Crashed thread: 0

My CS4 Illustrator keeps crashing when I try printing or changing typefaces, help?

My CS4 Illustrator keeps crashing when I try printing or changing typefaces, help?
I've already tried reinstalling and that worked few a few days but now continues to crash.

Matt,
Did you reinstall using the full three step way?
Uninstall (ticking the box to delete the preferences), run the Cleaner Tool, and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html
You may also have a look at items 1) and 11) in Other options (follow the link with that name)

Archiving of PO in change version

Hi
Can we archive the PO which is in change version . I tried doing it in E6U system with PO number 7600007675 which is in change version. but it gave error message that PO is in change version.
Pls help.
Regards
Ashish Garg

Hi
Please specify your SRM System version and detailed requirement.
When are you getting this Error. ?
<b>Meanwhile, Try the following SAP OSS Notes, which will help.</b>
<u>
Note 932291 Archived purchase orders are not displayed
Note 972607 Dump MOVE_TO_LIT_NOTALLOWED_NODATA when print & archive PO
Note 885273 SRM Archiving: Purchase orders in direct material scenario
Note 704237 SRM archiving: Making archivability check PO less strict
Note 637398 3.0-4.0: Archiving purchase order documents during output
Note 304541 Display of originals does not work in purchasing
Note 976264 Archiving enhancements in purchasing for ERP 2005
1048591 SRM Invoice Archived Before PO
1007245 SRM Archiving: Limit Shopping cart with deleted PO
995502 SRM Archiving: End date check for limit shopping cart
995284 Search in Archive Resulting in ABAP Dump
Note 987492 Bug on Spool Mgt when archive mode is "Print & Archive"</u>
Regards
- Atul

My D110 is printing a tiny version of my content stuffed into a corner.Help!

My D110 is printing a tiny version of my content stuffed into a corner.Help! Suddenly, everthing I need to use is the size of a postage stamp instead of full page. what has happened, is this fixable. thank you

If everything (web pages, word doc, even plain text notepad, etc) are printing to a corner, then someone must have set the resize/scale to a small percentage number. Check yoru print properties.

Printing of changed line item in scheduling agreement smart form.

Hi experts,
I am facing problem in printing of changed line item in schedule agreement.
can any body tell me how to find the line item has been changed through programming?what is the procedure to fetch the data for new line item.its
very urgent for me.
Please help me in this regard.
Priti Shrivastava

Hi
with the help of T180-TRTYP field you know if that doc has been changed or created.
If it is not equal to H it is changed. H means created.
pass the TCODE of Sched Agreement and check this field.
You can use the CDHDR and CDPOS table s to get the changed values of new item.
Reward points if useful
Regards
Anji
Message was edited by:
Anji Reddy Vangala

Full page prints from iPhone but not from iPad using photo app with AirPrint ?

Full page prints from iPhone but not from iPad using photo app with AirPrint ? iPad only prints 4x6 on full size paper. It's an HP 8600.

I also have this problem printing photos from an iPad to an Epson WF-2540 printer. It prints only 4x6 and without border (so print starts at extreme top left corner of paper). Borderless printing is not selected on printer. Printing a square photo just crops to 4x6 size.

How do I get all pages of a multi-page PDF form to print in old versions of Reader? Reader 11 prints all; Reader 10 skips first page

I'm new to forms creation, so please excuse my ignorance. I've created a 9 page form in InDesign CS6 on Mac OS 10.6.8 and exported it as an interactive PDF. With Acrobat 10.1.10 I've checked that there is no security -- everything is allowed. None of the form fields is required. I originally had some required fields but made them not required to see if my printing problem would go away. I enabled the extension that allows versions of Reader before 11 to save data in the form. Page 1 has combo fields, radio buttons, a submit button, and text fields. The rest of the form has radio buttons and text fields. Some of the people who've tried my form say they can print pages 2 through 9 but not page 1. One of them is known to be using Reader 10. I've tried printing my form with Reader 11 on Max OX 10.6.8 and Reader 11 on Windows 8.1 and seen no printing problems. What have I done wrong? Is there something about the submit button on page 1 that makes older versions of Reader not willing to print that page? There's nothing propriety or sensitive on the form so I'll leave it for a while in Dropbox in case someone is willing to inspect it. It's at
https://dl.dropboxusercontent.com/u/87784382/Savable_Local_Show_Report_2.pdf

I've been able to find someone willing to do some testing that I can't do without installing old versions of Reader on my computer. The surprising (to me) result is that the Submit button causes the problem. By simply removing the Submit button, Reader 10 is now able to print page 1. The Submit button was set up to do a "mailto". I don't know whether other destinations also cause the problem of the page not printing with old versions of Reader.

Printer settings changed after upgrade to 10.8

just upgraded from 10.6 to 10.8
In 10.6 I was able to have my Canon ix4000 printer print in black only, or saver mode etc (in the pics below this gets set up after you click one of the options). These options seem to have all disappeared in 10.8.
Does anybody know how to get this going again?
here the window options I have in 10.8
and here in 10.6
No need to say I loaded the latest driver from the Canon site.

done, here you are
Canon iX4000 @ Seva Server:
Status:          Idle
Print Server:          Local
Driver Version:          10.4
Default:          Yes
Shared:          No
URI:          dnssd://Canon%20iX4000%20%40%20Seva%20Server._ipp._tcp.local.
PPD:          Generic PostScript Printer
PPD File Version:          1.5
PostScript Version:          (2016.0) 0
CUPS Version:          1.6.2 (cups-327.6)
Scanning support:          No
Printer Commands:          AutoConfigure Clean PrintSelfTestPage
Fax support:          No
PDEs:
and just in case it helps here the same info form the MM running 10.6 that is sharing it on the network.
Canon iX4000:
Status:          Idle
Print Server:          Local
Driver Version:          10.72.1.0
Default:          No
URI:          usb://Canon/iX4000?serial=124A5D
PPD:          Canon iX4000
PPD File Version:          10.72.1.0
PostScript Version:          (3010.000) 705
CUPS Version:          1.4.7 (cups-218.31)
Fax support:          No
Scanning support:          No
Scanning app:          -
Scanning app (bundleID path):          -
Scanner UUID:          -

How to delete an active change version of a PO?

Hi all mates,
question: given a PO number, assuming that the active version is a change one and the previous version has been ordered (I don't know if this is the proper word: I mean "transferred to the backend" (R/3))... is there a simple way, e.g, a FM, to delete the last version of a PO, so that this goes definitely lost and the previous version is restored and set to active?
As usual, thanks in advance
Matteo
EDIT:
after reading a bit, I'd like to add further details:
- what I call a "change version" is actually a new version of the purchase order which is in status "HELD";
- 'transferred to the backend' -> the current version of the purchase order is in status "ORDERED".
Then, if i click on the "version" tab in SRM, i can see that an order modified after distribution has a previous version (status "ORDERED") and a current version (in status "HELD").
I'd like to know if there's a way to delete the current active version and restore the previous, ORDERED version. The question arises because I'm creating a report that makes an update of a Purchase order, but to do so the order must be in status 'ORDERED' so if an HELD version is active I should "rollback" to the previous one... or alternatively, I must manage overwriting the HELD version currently active ( I wasted a lot of time but I wasn't able to do it ).
Edited by: Matteo Montalto on Apr 8, 2009 12:45 PM

Hi, I have the same problem. Can you tell me the solution that you have find ??

Is there a way of locking a word document in ios mountain lion so that it cant be printed or changed?

Is there a way of locking a word document in mountain lion so it cant be printed or changed?

You can print because it's your document. Others shouldn't be able to. But then it's easy enough to unlock them altogether.
Easiest is to get encryption software and just encrypt the document. Or create a small encrypted disc image with Disk Utility and store the document in the disc image.

Printing only changed pages

In my department, we produce large technical manuals that are distributed to users around the world. When small changes are made to the manuals, we only distribute the changed pages (including the back side of the changed page since the documents are printed double-sided). Is there an automated way to only print the changed pages with the necessary back pages?

Rick Quatro at http://www.frameexpert.com has a plugin that will print only changed pages; I don't see it listed on his website at the moment, but if you contact him he'll be able to give you more details.
Rick's very, very familiar with the complications of dealing with changed pages in FM.

PDO Layer Error while approving a changed version of PO

Hi,
We are in SRM7.0 , EC Scenario , ECC 6.0
In SAP SRM system am experiencing a workflow issue , second level approver is not able to approve/receive the workitem of a changed PO. Moment we try to open the PO (changed version) and navigate to Approval tab, the approval flow is missing and showing the error as
PDO Layer Error
An Exception has occured
Every time we must restart the workflow due to which the approval needs to be done again from 1st approver.
We have raised an OSS Message and following is the response from SAP
" The second approver does not get an workitem because the workflow got the status error. The cause of this error is your BADI implementation
ZCL_SRMWF_AGENT_PO_BUYER method /SAPSRM/IF_EX_WF_RESP_RESOLVER~GET_AREA_TO_ITEM_MAP. This method returns an initial table LT_AREA_TO_ITEM_MAP.
Run method CREATE_DECISION_SETS (/SAPSRM/CL_WF_PROCESS_MGR_SBWF) with
parameter IV_PROCESS_GUID = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx "
When i executed this method CREATE_DECISION_SETS (/SAPSRM/CL_WF_PROCESS_MGR_SBWF) with
parameter IV_PROCESS_GUID = Changed version PO GUID , i got the following error
Exception CX_BO_ABORT triggered
Termination triggered in '' - Rollback required
Can anyone please help !!
Thanks & Regards,
Venkat

Hi ,
can you please share your Badi code?
Saravanan

HT2506 How to print the cropped version of a pdf

Hello, I have successfully cropped a document in preview (OS 10.8 ) and it displays perfectly on the screen. My problem is that when I print it, Preview prints the uncropped version, and I can't find a way telling it to do otherwise.
I even tried printing the cropped version to pdf, but that didn't work either. Have I missed a trick somewhere ?

I just tested this and it worked fine for me.
When you select to print the cropped page, in the print dialog will be a thumbnail of what is about to be printed. Does this display just the cropped portion or the whole page?

How to print the changed address in delivery output

Dear Gurus,
As all we know the customer address comes in sales order from customer master table or address table and further get copied into delivery also in case of same SP and SH.
My issue is that we do not maintain different SH for a sold to party so SP = SH and there addresses will also be same.
In output we are getting address from ADRC table.
Now if we change the ship to party address in delivery manually and get the output the printed address is unchanged.
But I want to print the changed address in delivery output without changing the masters and maintaining diiferent ship to party.
Please help me how to determine it in print out???
Thanks,
Sanjay

Hi,
I think the logic you have written is wrongly on output.
The logic is like this:
Pass the document number into "VBPA" table.
Execute.
Fetch the address number against "WE(ship-to-party)".
Pass the same address number into "ADRC" table to get the address.
Here you will get the new address which is different from the maaster data.
Regards,
Krishna.

Full PO print on change version

Similar Messages

Maybe you are looking for