Full repair senario for multiple objects?

Hi experts,
I did a full repair in first level ODS. know their is second level ODS and a infocube on the top of it. the cube is a daily full load. Do I have to delete the records from second level ODS and the Cube too?
Thanks in advance.
Sharat.

Kalpana,
We are not using DTP here. but it is a BU 7.0 version. Yes I am using IP to load from first level DSO to five different objects (3 cubes and 2 DSO).
So like you said I will delete the particular record from DSO's and the cubes and do a full repair request.
1.What I understood is it is mandatory to selectively delete the reocord from DSO and the cube before I do the full repair request right?
2.otherwise the load will fail becasue the exact record already is in the DSO? but it have the overwite functionality does it just overwrite it even if the exact record appers in the DSO?
3. How this work in the cube? I think the cube have the addition functionality, does it double the quantity for the identical record already exist in the infocube?
I will assign you the full points. Please help me understand the process.
Thanks in advance.
Sharat.

Similar Messages

How to setup a variant to do full repair request for 0Material?

How to setup a variant to do full repair request for 0Material?
Thanks
York

Hi,
Do you mean to set up a varinat in process chain?
Regards
Srini

Setting property for multiple objects?

Adobe Pro X; ES2
I need to set the access property for multiple objects based on the selection of a radio button group. I assume I have to use resolveNodes(), but cannot for the life of me get it to work. Here's what I've played with :
if (this.rawValue == "1") {
xfa.resolveNodes("OtherCase_gp.[*]").access = "open";
} else {
xfa.resolveNodes("OtherCase_gp.[*]").access = "readOnly";
If I use Action Builder, I get endless lines of "oTargetField = this.resolveNode("OtherCase_gp.OtherCaseOther_cb"); oTargetField.access = "readOnly";" There must be a better, more efficient way to do this!

Hi,
Here's another way to try;
var fields = xfa.resolveNodes("OtherCase_gp.#field.(name.substring(0,9) == 'OtherCase')");
for (var i = 0; i < fields.length; i++)
    fields.item(0).access = (this.rawValue == "1") ? "open" : "readOnly";
This approach will only work if your fields are all under OtherCase_gp, Radzmar's solution is more general if your form has a more complicated hierarchy.
Regards
Bruce

Is it possible to specify width in pixels for multiple objects at the same time in Illustrator CS5?

Illustrator has the 'Transform Each' dialog, but it only allows you to scale multiple objects by specifying a percentage. Is there any way to specify the size in pixels?
More specifically, imagine I have 10 rectangles on my canvas, and I want them all to be of a specific height. The rectangle position on the canvas matters, so I can't do the 'vertical align to top and then resize group height' trick - they need to be resized in place.

@Mike: Thank you very much for the quick reply.
Your suggestion does help, but there is still a gap. To be more specific, my rectangles are actually a bar chart, so the heigh of the ractangles is different and should remain unchanged. What I want to do is make each bar narrower to a specific pixel width. The Shape Options feature allows you to specify absolute dimensions, but it seems like you have to specify this for both the Width and Height - can't just do one unless I'm missing something. You can specify relative increase/decrease in pixels (which mostly solves my problem), but I have to calculate the pixel difference, usually fine unless I'm dealing with decimal pixels which I'd like to clean up and turn to clean pixels.
A bit confused about your last point. What does 'select individually' mean? Is Ctrl Enter do anything different from just Enter?

Simple Script for Multiple Objects?

Someone recently helped me with setting an opacity level for an object using this one line script and binding a keyboard shortcut to it: app.selection[0].transparencySettings.blendingSettings.opacity=50; (Pressing "5" sets the object's opacity to 50%)
Although the script works perfectly for one object, when mutiple objects are selected it only affects the first selected object. Can someone show me how to get this script to affect multiple objects at once?
Thanks in advance!

Thanks for the help man, but what's with the snarky comment? lol. Yeah I use my "5" key daily as well. But in ID it does nothing while in the default context, so why not put it, and the other digits to use to quickly set object opacity? (this function is similar to setting opacity for Photoshop layers by the way).
Have a nice day, and cheer up. Spring's almost here.

Need same logical path for multiple objects in a Single project

Dear All,
I have a requirement where I wish to ensure that whenever an object is created in the LSMW transaction (In a Single Project), that object has to be created always under the same logical path name.
This logical path I want to define under the transaction FILE.
Is it possible to get this done?
Please help,
Regards,

Nimish,
Please tell me how to ensue that for every object created we get the same logical path without entering any value.
The path i mean is the one defined in the transaction FILE
Thanks for your input.
Regards,

ECR/ECO Workflow not working for multiple Objects

Hello all,
We have implemented ECR/ECO workflow by customizing the SAP standard one. We are facing a problem when entering multiple ECO objects such as mutiple Documents, materials, BOMs etc. When we create the ECR, two parralel workflow start (one for ECM and other for ECO) and depending on how many ECO objects we have included, multiple instances of ECO workflows will trigger (I think this is the standard behaviour as well but not sure)
In our workflow, we have a wait step in ECO workflow that waits until ECM has been converted into ECO (ECOP status) and starts the ECO workflow. Also, we have created a Wait step in ECM workflow and that waits until the ECO workflows have reached the CONFIRMATED Step when the processing of the objects are finished.
When we enter one object, both workflows start and ECO waits until ECM has been converted into ECO and then start the processing the Objects. when the ECO workflow is done (Status confirmated), it switches back to ECM workflow and then goes on with Close/Release steps of the Objects/ECO etc.
But, when we have multiple ECO objects, both start well as ECR converts to ECO and the ECO starts and then work items are processed but then stops just before the CONRIMATED steps even though all objects are changed/maintained properly and ECO workflows are completed. As a result, the control doesn't refer back to ECM and we never get the ECO close and Release step work items.
I have checked SWETYPV, SWEL, business objects ECM and ECO but nothing gives a result..
Any help would be appreciated..
Thanks

Can you please update on what is the status in the workflow log. You can check this from SWIA tcode.
If it is in process step please check for ST22 dump if any.
Thanks
Arghadip

Direct Select for Multiple Objects?

Trying to fit a 3D box with a 2D skin that I made, and losing miserably.
I know that using direct select I can move anchor points to fit the DIMs
of my box, I cannot get Illustrator to use the entire layer, or group in its
direct select though (Probably why it's called 'Direct' select, right? lol).
Anyway, anyone know how I can adjust an entire layer of objects? I
wish Illustrators Transform capability was the same as Photoshops,
would make this a snap.
-jd

Do you know how to use Photoshops Transform feature? It is really a whole
lot easier to explain it like that. In Photoshop, you can select multiple layers
(in our case, the layers are really objects ). Transform, and hold down
CTRL (or whatever the MAC equiv) to Skew and Distort your layer by grabbing
the corners, or the center of the object and moving. This will allow you to have
your base |_| all of a sudden turn into a diagonal /_ / .....? Get it?
Okay I have a 3D box, at a 35* angle or so. I have a layer that is pretty much
a rectangle. What I am trying to do is, skew one end, to fit that 35* slope. It
would essentially make that 90* by 90* recangle diagonal, 90* by 35* grade.
If that doesn't make sense I will screencap but I think I'm explaining it fairly
well.

Need help on XSD mapping for multiple objects

Hi All,
I am having a table in which row1.column1 data is mapped with xyz atttribute from XSD which is having multiple occuraces.
Same attribute is mapped with row2.column1.
But ro3.column1 data is not getting displayed completly only few data is gettin displayed.
Example
<MYXML>
     <EMP>
          <name>a1</name>
          <address>usa</address>
          <age>20</age>
     </EMP>
     <EMP>
          <name>a2</name>
          <address>canada</address>
          <age>21</age>
     </EMP>
     <EMP>
          <name>a3</name>
          <address>india</address>
          <age>22</age>
     </EMP>
</MYXML>
here row1.column1 mapped with name
row1.col2 mapped with address
row2.col1 mapped with name
row2.col2 mapped with age
Please help for the same.

Mohit,
     Here is a sample file for your use..
https://acrobat.com/#d=urni5MvK7Fx87liMbRpPgQ
    I used the below XML as data connection as well as Preview Data..
<?xml version="1.0" encoding="UTF-8"?>
<MYXML>
     <EMP>
          <name>a1</name>
          <address>usa</address>
          <age>20</age>
     </EMP>
     <EMP>
          <name>a2</name>
          <address>canada</address>
          <age>21</age>
     </EMP>
     <EMP>
          <name>a3</name>
          <address>india</address>
          <age>22</age>
     </EMP>
</MYXML>
Thanks
Srini

Set reference point for multiple objects in the middle of the document

Hello Community,
I want to mirror a layout.
So I:
1. Select all the objekts
2. Set the reference point to the middle
3. Mirror the objects
BUT
The reference point is the middle of all the OBJECTS. That leads to several objects crossing the border of my document because the layout isn't spread out evenly.
I want to middle of the DOCUMENT to be the reference point. How can I do that?
Thanks
Christian

Have you fiugured this out on your own?
I just played around a bit and found a method, but it's not exactly intuitive. Select the object(s), then switch to the Rotate tool. The center of rotation will be defined as one of the transformation handles, but you can drag it to anywhere you like, so move it to the point that you want as the center of your mirror. Hold down the Alt/Opt key, and click the reflect button to make a mirrored copy. Without the modifier key the original objects will mirror their position around the repositioned reference.

Using a Seq Num for Multiple Objects in Oracle Forms Ver. 6i

I have a requirement to produce SEQNO for each course taken in my organization. There are 100 courses and each course has 20 people, so each course must start with a SEQNO of 1 with the last being 20.
I need to cycle the SEQNO back to the value of 1 for of the 100 course batches I insert to the database.
Can Oracle accomodate using SEQNO like this? Any ideas are welcome...
Jim Clark

It works for me on 10g but the only pitfall is the " * ", the workaround is to use the " & " in the label next to the key you want.
for example:
Button*   label &*
Button-   label   &-
Button/   label   &/
Button+   label   &+
Button.   label   &.Try it
Tony

Single content repository for multiple archiving objects?

We have three archiving objects that the business has basically set the same retention period for all of them (April 1: archive previous year (current-1), delete archived data from the year before (current-2)). Rather than have three separate repositories, would it be a good practice to place these three (and any other that meet the criteria) into the same repository making the management of these simpler (deleting from IXOS)?
Thank you,
Skip howell
Limited Brands

Hi,
COntent repository can be single or multiple. It depends on the clients requirements.
How ever you can recommend to your client based on the following best practices :\
(1) COntent repositories can be created and allocated based on the archive object.This will help the client to maintain the archive files and also use them at a later stage for retrieval/audit or any other purpose.
(2) Content repositories can also be created and allocated based on the retention time .
(3) Single content rep for multiple objects is technically possible but this is not a good approach.If this is done, then utmost care needs to be taken during the Archive file naming convention ( while archiving the data for a particular object) . Such a naming convention would reduce the hassels of getting the archived files mixing up. this will also help you to better manage the archive files of different objects in a single content rep.
DIfferent clients may use any of the approact based on their records management strategy.
Hope this information helps.

Are there REST APIs to retrieve entity metadata for eloqua objects?

There is a list of all the objects which can be accessed by REST for CRUD in this link: REST API - Documentation for Core Objects under the Core Objects section.
For each of the objects listed under the Core Objects section are there is a field metadata under the Properties section.
For example for Email object, REST API - Accessing Emails , under the Properties section, there corresponding entries for fields of Emails object under the
Name ,Type, Description and Validations headings.
Is there a REST API for retrieving the same information i.e. the field metadata for an eloqua object programmatically ?
If not , it is a serious hindrance to building systems that are metadata driven and also since SOAP support is being deprecated...

Metadata is 'top level' information on the object, and available whether you query the individual object (a single form, or email asset) or query for multiple objects of that type (list all forms, list all emails). Consider using a depth of minimal or partial for faster performance if the specific configuration of those objects is not important..
Example:
GET /assets/forms?depth=minimal&count=2
Returns:
"elements":
    "type":"Form",
    "currentStatus":"Draft",
    "id":"19",
    "createdAt":"1409623550",
    "createdBy":"8",
    "depth":"minimal",
    "folderId":"7",
    "name":"zzztestCS_3-9381543541_AutocompleteTest",
    "permissions":"fullControl",
    "updatedAt":"1409623623",
    "updatedBy":"8"
    "type":"Form",
    "currentStatus":"Draft",
    "id":"22",
    "createdAt":"1409781207",
    "createdBy":"11",
    "depth":"minimal",
    "folderId":"466",
    "name":"daisychain1",
    "permissions":"fullControl",
    "updatedAt":"1412779449",
    "updatedBy":"20"
"page":1,
"pageSize":2,
"total":130
Without limiting the count to 2, this would return up to 1000 results if you had multiple forms in your system and give you a basic top level view of each. Similarly, you can use GET /assets/form/{id}?depth=minimal to get the same sort of information.
Other endpoints can be found on the REST livedocs page here (requires authentication):
https://secure.eloqua.com/api/docs/Dynamic/Rest/1.0/Reference.aspx
Regards,
Bojan

Some records missing while full repair from datasource 2LIS_11_VAITM

hi friends,
we are using the datasource 2LIS_11_VAITM. If we run a full repair with a selection ., say for a particular dealer, some document numbers are missing. even if we run a full repair without any selection, same thing happens.
we couldnt able to spot out where the records are getting filtered. is there any way to check the datasource for any filterations.
can anyone tell from which tables the data is flowing to this datasource.

Hi.
fill the set up table first for the application 11 for the selections which you want to get pulled in BW.
A full repair load for a LO data source is pulled from a set up tables and a full repair will pull whatever is in set up tables.
So fill the set up table for the values which you want to be pulled into BW first.
I think right now your set up tables do not contain those records which you want in BW.
Then verify in the t-code RSA3 for the selection and see if you are able to see those records there.
if its showing up in RSA3 then schedule a full repair and it will show up in BW then.
The major underlying table are VBAP,VBAK.you can verify the values from there.
Do not forget do delete the set up tables before filling it.
Thanks
Ajeet

How to find multiple transport requests for one object

Hi all,
Is there any function module which will fetches multiple transport requests ( if created ) for one object.I tried almost all the function modules , but i didn't got the solution.
I need to develop a report ,   which will takes a single Task number as input and gets the Request number from table E070.
Based on that Request Number i will fetch remaining Task numbers under it.
Then for all the Tasks Numbers, i am fetching their objects by using table E071.
I need to list out whether any of these objects are in multiple Transport Requests. Once i got all the Transport Request numbers i need to release the Request based on their Transport Request sequence.
I tried the following FM's , but not able to get the solution.
SVRS_DISPLAY_VERSION_LIST
SVRS_GET_VERSION_DIRECTORY_46
SVRS_GATHER_REQUEST_FRAGS
Thanks..

Hello
I have tried with below code
DATA list_tab TYPE TABLE OF abaplist.
SUBMIT RSWBO040 USING SELECTION-SET 'TEST'
                EXPORTING LIST TO MEMORY
               AND RETURN.
CALL FUNCTION 'LIST_FROM_MEMORY'
   TABLES
     listobject = list_tab
   EXCEPTIONS
     not_found = 1
     OTHERS           = 2.
IF sy-subrc = 0.
   CALL FUNCTION 'WRITE_LIST'
     TABLES
       listobject = list_tab.
ENDIF.
break-point.
Submitting the program(RSWBO040) of SE03 transaction a will result in 'CNTL_ERROR' dump.
Please try some other options
Thanks

Full repair senario for multiple objects?

Similar Messages

Maybe you are looking for