Full Restore from Time Machine after new HD / OSX 10.5.6

I've been reading the forums and still haven't found a clear answer to this...
I recently received my computer back from repair with a new HD and 10.5.6 installed.
I didn't 'restore from TM backup' immediately, but would like to now.
When I go into TM, it doesn't show past backups (only 'Now' and Today'); and when I use finder to go into my dedicated TM backup HD, it says 'you do not have sufficient access privileges'. I tried to backup from the computer before restoring, thinking that might kick start TM to recognize past backups, but it crashed in the middle of backing up...twice...
I seem to understand that I can boot from the Leopard CD, and choose a 'restore' option after choosing the language...but why should I have to 'reinstall' 5.1 when I already have a clean load of 5.6???
Any advice (or smart questions that might clarify what I'm doing wrong) are greatly appreciated. I can't believe that the only option is to restore first thing, that there's no way to do so later...??? I would have, but didn't want to restore 100+GB before knowing if the problem I sent the computer in for had been fixed (buzzing screen: actually wasn't fixed at all, so this whole thing is a total waste of my time).
Thanks,
tired in California

jhartshorn,
One performs a "full restore" by booting to the Leopard install disk, choosing a language, then choosing "Restore from a Time Machine Backup" from the "Utilities" menu. The backup drive is then scanned, and you choose from listed backups.
This doesn't "install" OS X in the normal sense, from the DVD, but rather restores the entire system that is backed up. If you had 10.5.5 installed when you made your last backup prior to sending it in, that's what would be restored, along with all of the user data within that backup.
When you received your computer from repair, you made another backup. OK. That backup will have been a new full backup, and will not have been contiguous with your old one. As long as the drive was not formatted (erased) by Time Machine when the new backup was made (was it erased?), your old backup will still be there, and still be accessible to the installer.
Does this answer all your questions?
Scott

Similar Messages

Full restore from Time Machine fails

I am trying to replace a failing hard drive. The failing drive in in a box. A new one is in the computer.
When I try to run a full restore from Time Machine it comes up with an error saying the restore failed. No useful information like codes or reasons are given.
I'd prefer to do a full restore, but I fear the cause is too much system file corruption on the TM drive. I think the only alternative is to recreate the four user accounts and somehow copy the files back to the accounts.
Before I swapped the drives I set all permissions on the files in each account to admin=read/write, user=read/write, other=read only. I then created a couple incremental backups to Time Machine.
Currently I have 10.5.0 installed. I have to install 10.4, then upgrade, which is a very lengthy process.
The old drive is still (barely) functional. While using it though, if I try to run any program, the system hangs for minutes at a time, (BBOD).
How should I proceed? Is there a way of repairing the backup? Do I try the copying all the files? I have no way of using the Migration feature since I only have the one Mac. I do have a PC.
Thank you in advance.

Melnibonean wrote:
When I try to run a full restore from Time Machine it comes up with an error saying the restore failed. No useful information like codes or reasons are given.
It's possible that as the HD was failing, it corrupted something in your installation of OSX, and that was backed-up, so when you restore it, you're restoring damaged items.
Try again, but pick an earlier backup, from before the problems started.
When you do, once it starts, select Window, then +Show Log+ and +Show All logs+ from the menubar. Watch the messages; if it fails again, note what it says. That will tell us, roughly, where it was, so we may be able to avoid it.
Currently I have 10.5.0 installed. I have to install 10.4, then upgrade, which is a very lengthy process.
Huh? Why would you install Tiger?
How should I proceed? Is there a way of repairing the backup?
Possibly, depending on what's wrong.
Instead of selecting +Restore System from Backup+ from the Utilities menu, select +Disk Utility+ and use it to do a +*Repair Disk+* on the backups (via your Leopard Install disc). Then quit DU and try +Restore System from Backups.+
I have no way of using the Migration feature since I only have the one Mac.
Yes, you do, if the backups are ok. You can use +Setup Assistant+ or +Migration Assistant+ from your backups (or a clone), not just another Mac. But they both only use the most recent backup, which may be damaged, so try the full restore first.

Leopard. Did a full restore from Time Machine. Now I can't access my other internal and external drives. I get the following error: The folder "Capture Video" can't be opened because you don't have permission to see its contents.

Leopard. Did a full restore from Time Machine. Now I can't access my other internal and external drives. I get the following error: The folder “Capture Video” can’t be opened because you don’t have permission to see its contents. I have repaired permissions pn the main harddrive. When I try too click on a disk I get the previously stated error. I can't even open up information to see what permission/access there is. It simply will not let me see the content. It shows the content of my main hard drive when I have clicked the other harddrive's name.

Solved:
sudo chflags 0 /Volumes/"FCP Time Machine BU"
sudo chown 0:80 /Volumes/"FCP Time Machine BU"
sudo chmod 775 /Volumes/"FCP Time Machine BU"
sudo chmod -N /Volumes/"FCP Time Machine BU"

Full restore from Time Machine fails what now!

Just upgraded to 10.8 and all was fine except on crucial pice of software that was supposed to work in 10.8 but didn't.
I tried to revert back to 10.6 via full restore but it failed. Now I just tried to restore from TM backup of the 10.8 restore point.
It fails too. All my HDs check out fine. What went wrong and how can I get back to working?

Melnibonean wrote:
When I try to run a full restore from Time Machine it comes up with an error saying the restore failed. No useful information like codes or reasons are given.
It's possible that as the HD was failing, it corrupted something in your installation of OSX, and that was backed-up, so when you restore it, you're restoring damaged items.
Try again, but pick an earlier backup, from before the problems started.
When you do, once it starts, select Window, then +Show Log+ and +Show All logs+ from the menubar. Watch the messages; if it fails again, note what it says. That will tell us, roughly, where it was, so we may be able to avoid it.
Currently I have 10.5.0 installed. I have to install 10.4, then upgrade, which is a very lengthy process.
Huh? Why would you install Tiger?
How should I proceed? Is there a way of repairing the backup?
Possibly, depending on what's wrong.
Instead of selecting +Restore System from Backup+ from the Utilities menu, select +Disk Utility+ and use it to do a +*Repair Disk+* on the backups (via your Leopard Install disc). Then quit DU and try +Restore System from Backups.+
I have no way of using the Migration feature since I only have the one Mac.
Yes, you do, if the backups are ok. You can use +Setup Assistant+ or +Migration Assistant+ from your backups (or a clone), not just another Mac. But they both only use the most recent backup, which may be damaged, so try the full restore first.

Full restore from Time Machine has not restored my photos

I was getting a triangle with an exclamation mark in it when I tried to click on my photos in iPhoto (photos uploaded from my camera only - iPhone pics are still there). A backup from Time Machine didn't work, so I did a full restore from Time Machine to a date when I knew all was well with my photos but I still get the triangle/!. Where are my photos?

The ! means that iPhoto has lost the link to the original file.
Are you running a Managed or a Referenced Library?
A Managed Library, is the default setting, and iPhoto copies files into the iPhoto Library when Importing. The files are then stored in the Library package
A Referenced Library is when iPhoto is NOT copying the files into the iPhoto Library when importing because you made a change at iPhoto -> Preferences -> Advanced. (You unchecked the option to copy files into the Library on import) The files are then stored where ever you put them and not in the Library package. In this scenario you are responsible for the File Management.

After restoring from Time Machine to new Hard drive, system will not boot

I replaced my hard drive on my Macbook (2008 model) with a larger drive. I then put in my Snow Leopard disk, and followed the steps to restore from Time Machine backup. a few hours later it said it was restored, but when trying to boot up, I just get a blue screen with an occasional flicker to the Leopard screen. I tried an earlier back up as well but with the same results. Any suggestions??

Same exact problem here just yesterday, folks.
Got a bigger hard drive on my MacBook Pro (15-inch Core 2 Duo) and installed it. Followed the restore procedures from Gizmodo (http://gizmodo.com/333319/the-secret-of-the-time-machine+assisted-hard-drive-swa p). Then got the blue screen immediately after the chimes.
I only managed to transfer my old disk content by using CarbonCopyCloner.
Having said that, your solution looks uselful, Portland Mac! :
Portland Mac wrote:
... But when I decided to try and just do a fresh install and work my way back through all my software, I started by installing Snow Leopard and suddenly it boots and everything from my Time Machine backup is there...
But I would not say the following:
Portland Mac wrote:
... On a new drive apparently you have to install Snow Leopard before you do a time machine restore.
Am I mistaken, or did you do a fresh install after restoring your TimeMachine backup?
In any case, I found an interesting Apple article that might confirm that there is a problem: [Mac OS X v10.6: Issues after restoring a Mac from a Time Machine backup made with a different Mac ("Restore System From Backup…")|http://support.apple.com/kb/TS3243]. Or is it a completely different thing?
And another discussion that might give some good advice: [http://discussions.apple.com/message.jspa?messageID=12578529#12578529]. Personally, I will now do as the man says: two backups, on two different external hard drives, using different apps, the other one being CarbonCopyCloner...
For info, and I don't know whether that matters, my backup disk had been full and some past content had been erased automatically by Time Machine. But I don't think this should have mattered...

Restore from Time machine on new 13" Macbook Pro 2.8 i7 after replacing with OWC SSD

I have new 13" Macbook pro with Apple 256SSD. I am replacing with OWC 480GB 6GB SSD because out of space. When I bought machine I used time machine to restore from backup of other macbook pro. I simply held a key on keyboard at startup (dont remember key?) and it appeard to boot from the cloud to a screen where i selected time machine. Will it work the same this time or because I am replacing hard drive i have to create the USB key thing to restore from time machine? ie does apple have the restore from cloud capability only from their own drives?

You should consider restoring or migrating first only data that you absolutely need and want on the SSD. Then restore selectively.
On the latter, and in general on the topic Time Machine, here is good advice.

After a full restore from Time Machine, I get "error code -6584" when trying to go into TM.

I took our iMac in, at the direction of Apple, to have the hard drive replaced. When we got it back, I restored from Time Machine (on Time Capsule). One file on the desktop, a spreadsheet file, has reverted to a version five months old, with the loss of considerable data, so I don't know which files I can now trust. Also, when I try to go into Time Machine, I get "error code -6584" and am unable to access my backups
This is potentially very very bad. What can I do?

Solved:
sudo chflags 0 /Volumes/"FCP Time Machine BU"
sudo chown 0:80 /Volumes/"FCP Time Machine BU"
sudo chmod 775 /Volumes/"FCP Time Machine BU"
sudo chmod -N /Volumes/"FCP Time Machine BU"

Selectively restore from Time Machine after reformatting

I just reformatted my drive and reinstalled Mountain Lion and then upgraded to Mavericks. I backed up to Time Machine just before the reinstall. Time Machine did combine my first new backup with the ones before the reinstall, which I can see when I browse through the Time Capsule.
I would like to restore some things from the Time Machine timeline, however when I enter the timeline, the backups prior to the reinstall are named in purple on the dateline and the Finder windows are black and inaccessible. I suspect this is because after the reinstall the computer has a new account name, so the permissions are different on the previous backups with the old account name.
Does anyone know how to get the older backups to be accessible in the timeline? I would like to just selectively restore a few things as needed, and would like to do the "restore from Time Machine" rather than drag copying files from the mounted backup.

I would like to just selectively restore a few things as needed, and would like to do the "restore from Time Machine" rather than drag copying files from the mounted backup.
For this type of activity, you might want to take a look at Migration Assistant on your Mac, located as follows:
Macintosh HD > Applications > Utilities > Migration Assistant
More info here: OS X: How to migrate data from another Mac using Mavericks

Restoring from Time Machine AFTER install

My hard drive crashed, so i had to buy a new one (WD scorpio blue). I replaced it, then reinstalled from the install disk (10.4.10, Tiger). That was mistake one. What I meant to do was to restore from my time machine backups on an external HD. I also have the leapord disk that came with, which i forgot to install from, my second mistake. so my question is -- do i have to erase the hard drive and start back over to install from my TM back up, or can i do it either during the upgrade to Leopard or from Tiger?
Thanks.

Matt Clifton wrote:
Boot from your Leopard disk (with your TM drive connected), and go to Utilities - Restore from Time Machine Backup.
So, using this procedure will restore my MB onto a totally new hard drive with all my programs back intact along with any files?
If so, this looks like a great way to replace/upgrade a hard drive. Re "go to Utilities", is this folder or option from the Leopard disk?

Full Restore from Time Capsule after hard drive failure

Authorized agent replaced hard drive after it failed. Installed 10.5.5 and currently attempting to do a full restore from Time Capsule - progress is slow and in question after 22 hours. The backup size approx. 100 gb.
Screen reads "Transferring Information" at the top, progress bar is moving, and bottom of the screen reads "Looking for applications and documents to transfer" and hasn't changed for 22 hours.
Is this normal? how long should 100 gb take to restore?

think about the speed of wifi here
speed at 802.11n = a theoretical 540Mbps (less in real world scenarios)
Mbps = Mega bits per second
MBps - Mega bytes per second
8 bits = 1 byte
8 mega bits = 1 mega byte
How long would it take you to download a 1 gig file from the internet wired into your modem? About 10-20 min? And that is taking into account that the info is being uploaded hardwire. Now imagine that same file over wireless in your home being upload by the Airport card in your computer. People over look upload speed when considering these things. The wireless upload speed of your Airport card is what is limiting this. Just a limitation of the technology, not a fault of Apple just stating the numbers here.

Full Restore from Time Machine, will iTunes recognize my iPhone or...

Hi All:
About ago my MB Pro was stolen. Fortunately, I had strong security settings and was diligent about backing up to Time Machine.
I am about to purchase a new iMac to replace the MB Pro, and will be doing a complete restore from time machine to recover my data. However, since my computer was stolen, life has gone on. I have purchased music from iTunes via my iPhone and also added many new contacts. Does anyone know what will happen the first time I try to sync my iPhone to my fully restored image on the new computer? Will iTunes recognize the iPhone as it was before and do a 2 way sync (new music and contacts sent back to iMac) or will it want to override all data on the iPhone and replace it with the existing contacts and music from the restore?
Thanks!
John

All of your iPhone data (the iPhone backup done by iTunes) is stored in your user folder's library as: USER/Library/Application Support/MobileSync/Backup. I believe some iPhone data is also stored here: USER/Library/Application Support/SyncServices. For some reason, the folks at Apple thought that this was NOT information that needed to be backed up in Time Machine.
So unless you copied and pasted the backup folder into your external drive, your migration of info from the drive to the iMac will not carry any iPhone info to the new computer.
That being said, I'm not exactly sure what the iPhone will do when being plugged in. It will probably ask if you want the phone to be associated with the user account on that iMac, and upon selecting yes it MIGHT try to send your contacts, calendars, etc. to the new iMac. I am not sure about this--if I were you I'd ask a Mac Genius at an Apple Store or call AppleCare. But the Apple Store would be your best bet. The iPhone would not be able to send music, but that's not a big deal since you have it all in the backup anyways.

Can't restore from time machine after SSD upgrade

Macbook Pro 13" mid-2009, 10.7.5 Lion
I just swapped out my 160GB HDD with a 250GB SSD on my MBP. When I booted up, I pressed Command-R to try to get into recovery mode but all it does was showing a gray folder with a question mark on it.
I had previously backed up my HDD with time machine. My original HDD is no longer available because I tried to upgrade to Mavericks (since the command-R was not working) and upon restarting my MBP was locked with system pin code (that is another nightmare all by itself)
What are my options besides getting a 10.7 Lion CD from the apple store and try to boot it up that way? and then restore from time machine?
Any other way I can get into receovery mode?
Thanks (My MBP is now a brick sitting on my desk)

It's a bare drive so it isn't formatted and it doesn't yet have a Recovery HD installed on it.
Your computer originally came with a version of Leopard installed. You can reinstall it if you still have the original discs that came with the computer. Or, if you have a retail Snow Leopard DVD you can reinstall Snow Leopard from which you can then upgrade to Mavericks (Lion is no longer available for re-download.) It's unlikely your local Apple Store has a Lion USB flash drive or DVD although you can certainly make an appointment and ask for their help.
You should see if you can boot from the Recovery HD invisible image in your Time Machine backup drive. Connect it to the computer and use OPTION boot to get the boot manager. If you see a Recovery HD on your backup drive displayed, then boot from it.

How do I Restore from Time Machine after I have reinstalled my system software (Snow Leopard and then Lion) ?, How do I Restore from Time Machine after I have reinstalled my system software (Snow Leopard and then Lion) ?

I have never done this before, so can someone explain in detail how I reintall my system software and then restore from Time Machine please ?

Your profile indicates that you currently have an older version of Snow Leopard (10.6.2). In order to install Lion, a prerequisite is the latest version of Snow Leopard (10.6.8). Perhaps a few more details would be helpfull in solving your problem. ex. If all you want to do is to upgrade to Lion, a restoration of data is unneccessary. Download the latest version of Snow Leopard and then download (purchase) and install Lion. User data will remain intact.
If I am missing something, please elaborate.
Ciao.

After Full Restore from Time Machine..

Hello All!
I've searched around but can't find the solution.. Unfortunately there was a terrible accident with my last Macbook Pro so I purchased a new one... I did a full install using Migration Assistant to replace my User account from Time Machine. I never got the option to 'use time machine history' and now aren't sure whether it's 'building' on top of my old Time Machine or just starting a new one. When I go into preferences it says 'oldest Back Up - None' & 'Latest Back Up - None'
Does any of this matter as the Old back ups are still there - the External Harddrive says 127 of 250Gb used... Or do I need to 'merge' these backups?
Many thanks.

I think that you should be fine. If you open Time Machine you should be able to determine the status and it should work as designed.
I have never encountered the"Inherit Backup History" that you mention. It probably is a Lion feature (I still use Snow Leopard) and I have never used Time Machine to transfer data to a new MBP or a restore. I prefer to select what I want to retain and let the rest go by the wayside. This way any 'trash' I may have does not get copied to the new MBP. Consequently when I connect the Time Machine HHD, it then does an entirely complete new update.
Keep the Pondini web site in mind. It has a plethora of useful Time Machine information.
Ciao.

Full Restore from Time Machine after new HD / OSX 10.5.6

Similar Messages

Maybe you are looking for