Full screen image warp - removable?

I always use Quicktime to view videos on my Mac. However, I don't like viewing videos in 4:3 so I always stretch it to Panoramic. I don't mind the stretching (heck, I barely notice it half the time). But I do notice the image warp Quicktime does on the sides of the video. I don't fully understand how or why it does it, but it does. VLC doesn't do this, but VLC is rubbish at viewing mkv files. Is there a way to remove this image warp as it's starting to get on my nerves.
Thanks in advance.

Yes, don't stretch videos to 16:9 when they were intended to be 4:3.

Similar Messages

In the slide show view how can you pin the "next" Arrow to the ultimate edge so it is in the same place as the full screen image, it will pin to the left edge but not the right.

In the slide show view how can you pin the "next" Arrow to the ultimate edge so it is in the same place as the full screen image, it will pin to the left edge but not the right.

Hello,
Please make sure that the next button is pinned to the right side as there in the attached image.
If it is already pinned, you can try removing any embedded HTML code and checking it.
Regards,
Neha

Full screen images and full screen color background boxes are cropping horizontally.

Full screen images aren't loading and full screen color background boxes are cropping horizontally. I'm forced to make my images a full screen slide show (of 1 image) to make it work, but then I lose the option to pin the image. Am I alone in this?

Hello,
I would request you to share the a url or few screenshot so that i can get better idea about the issue.
To create a temporry url you can go to File > publish in muse.
Regards
Vivek

Full screen images on page?

I would like to have full screen images on a page that fits to most browsers. I don't know what would be the best width in order to acomplish that.

Hi. I am also trying to have my images appear full screen when previewing in a browser. I realize you can do this by adding an image to the
background of your Muse Document. However, this is NOT what I want to do. Here is a link to website where the images appear full screen,
no matter how you size the browser window. http://www.lexusls.asia/ I too would like my images to appear full screen when appearing in
a browser. I have also included an image of what I am getting when I try this. See how the city image floats in the middle? I want it to fill the
entire screen when viewing in a browser.
Thanks to all who may reply.
matt

Full screen images on E65

How can i put full screen images on my E65??

Well, when you say fullscreen, you mean you want it to cover the active standby apps, as well, as the clock and provider area? If so, then you would have to customize your picture and turn it into a theme. If not, then edit your picture to be 240x320 pixels in the dimension. Your picture could be larger in size as long as it has the same aspect ratio, it should fit in perfect. I have not tried this myself, but theoretically it should work.
Hope that helps.

Create a full-screen image gallery with MSO - breaks other buttons?

Hi - I'm trying to create a full screen image gallery to be accessible from any layout via a button. The ultimate goal is to use my layout as a presentation tool and allow the presenter to have an 'image gallery' button on each page,so they would be able to jump to a full screen image at any time. Most of my layouts have other buttons, scrollable content, etc. I thought I had a great idea: create a multi-state object with the first state being blank, and each subsequent state would have an image and also a full screen black box at 50% transparency. The problem is, now my other buttons are no longer working. I confirmed that the existing buttons will work if they are arranged to be in front of the image gallery MSO, but that's not a good solution. Am I missing something or is there another workaround? Thanks!
John

You have to put buttons inside each state of the MSO.
It's not really a workable design in the long run, you should probably rethink it It's also not good from an app performance standpoint as it requires loading full-screen images for each state into memory.
Neil

Question slide- Launch a full screen image in new window.

Hi,
I am using Captivate 4.
In the question slide (MCQ/ Matching) I want to have a transparent button over a thumbnail image.
On clicking this button, it lanches a full screen image in a new window.
The student views the image and answers MCQ, Matching (droplist) on the main screen/slide of captivate.
This new window can then be closed by clicking 'X' on top right corner of the window.
How to do this?
Thanks and regards
Rajan

Hi there
Instead of a Transparent Button you should think instead about Click Boxes. But either way, Captivate doesn't allow Buttons or Click Boxes to be inserted on Question Slides.
However, Captivate does allow you to insert Flash objects on Question slides. So you could develop a Flash object that would carry out the desired actions when clicked. Then insert the object on the Question slide.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcererStone Blog
Captivate eBooks

Blurry full screen image 4.x/5.0/5.2 RC (Develop Module)

I've created a small youtube video showing how the image goes blurry when hitting F for full screen.
http://www.youtube.com/watch?v=bI0GGFgE7Y8
I've zoomed to 1:1 and then hit F in this case. It's tempermental, it's not something that happens 100% of the time. I'd say more like 85%.
I've also seen it be sharp after hitting F and then go blurry when I try to pan left or right on the full screen image.
This issue really makes a dedicated monitor for full screen images when developing useless.

I'm not the only one having this problem:
http://forums.adobe.com/thread/1229073
http://forums.adobe.com/message/5258926
http://forums.adobe.com/message/4785703
We just need to find out what is common.

In Elements 12 Organizer, View Full Screen images are not loading. Have already tried disc cleanup.

It was working a couple of days ago, now when I select several images to view full screen, the page comes up, but the images don't. I have a PC, and have already tried doing a disc cleanup and defragmentation.

I’ve found a work-round.
This is embarrassing (for Adobe), as the work-round is to set the CPU affinity to single cpu mode. With that PSE 10 has been running in slide show mode for 3 hours now. Looking good!
On a temporary basis, from the task manager, show the ‘processes’ tab, right click on the PhotoshopElementsOrganizer.exe *32 process, choose ‘Set Affinity …’ unselect ‘All’ and select (check) any one CPU. (Under W7 32 bit I guess you won’t get the *32)
For a more permanent fix, using the start command with the affinity option is needed. This is not compatible with the PSE 10 launcher though, if you use the launcher you will need to set the affinity as shown above.
To use the start command, from a command prompt type start /? for the syntax..
Try a google search of “how to set the processor affinity” for further advice.
Now, should Adobe be reading this thread I have some advice for them:
“It is NOT POSSIBLE to conduct a reliability test of a program using a virtualized environment”.
I made the error of assuming that after the PSE 6 fiasco in a multi-cpu environment Adobe would not make the same mistake again. Well, they have. Perhaps this time they will conduct a root cause analysis of what they are doing wrong with their test plans and FIX IT, because I object to doing their testing for them, again.

Text Boxes and Lines on Full Screen Images?

In iBooks Author I'm trying to create images with text boxes and lines overlayed on top of the images (I don't like the interactive image widget, I want just text with no gray box and a single line of text, no need for title and description, also don't need the zoom capability on each label). I can do this fine in a basic, two column layout but when I tap on an image within a figure to see it full screen on the iPad I want the text and lines to also come full screen. Any ideas? I seemed to have a solution by enabling placeholder text authoring but that's proven inconsistent.

Sound like a 'group'.
Whatever works
Good luck
Ken

Dual Monitor Full Screen Images

Hy to everyone, I have a G5 with dual monitor out set to 1024x768 each, for a total resolution of 2048x768, i created images graphics of that resolution(2048x768)like jpg tiff, flash,and I want to display these enterely on the two monitors not only in one, when i maximize the windows it fit the images only in one screen and not in two screen. What i have to setup? is there some software that manage the desktop and windows of the mac?
Thanks a lot.

No, if i set Quicktime in full screen mode the movie fit only one monitor and not 2, even if my movie i set to 2048x768 pixel and my 2 monitors are 2 1024x768 in desktop mode!! I Can manually strech the quick time to reach the 2048x768 resulution, but i see the toolbar of quicktime and i dont wan't it.
Thanks a lot.

Viewing full screen images gets very slow in PSE 5&6

In full screen preview mode, when going from a horizontal image to a vertical image, it takes several seconds to go to the next image.Have tried turning off and on the resizing option and it had no effect. Viewing 2mb jpgs from a Nikon D200.Have Win XP 64, 8GB Ram, dual core processor and a middle of the road video card.
Could this be a video card issue? Would going to PSE 8 help. does PSE 8 utilize 64 bit OS?

Very interesting. I'm guessing that the portrait photos were rotated by the camera by setting the Orientation field in the photos' metadata, and that for some reason, PSE on your system requires a lot of time to properly rotate them on the fly in Full Screen view. When you edit the photo in the Editor, it rotates the actual image, rather than setting the Orientation field.
For a couple of test photos, try following steps 1 - 3 of this FAQ:
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Photos_not_properly
This should have the same effect as editing them in the Editor.

Strange behaviour of 2nd monitor full screen image

Hi,
Since last night, my LR5 is starting to behave very strangely with my 2nd monitor image. My 2nd monitor has been set to "Show, Full Screen and Loupe-Normal", and I have always been using this two monitor set up to show my image in full screen mode (since LR4) without problems. But since last night, the 2nd monitor image starts to minimize itself randomly. If I click the 2nd monitor icon (on the bottom left of main screen) it comes back. Then when I moven to the next photo, it may disappear (minimize) again. It is very frustrating. I never changed any of my settings. Is there anything that I missed? What makes the 2nd monitor image go away? Anybody experienced the same phenomenom?
Thanks in advance.
Jerry

Have a look :
http://dl.dropbox.com/u/3563737/Lycos/Beach.html
http://www.wyodor.net/_Demo/Fancy/Dynamic_Text.html
Paste the code in a HTML Snippet.

Full screen image that stays flush with bottom of browser?

I'm trying to make it so the image fills a full screen box and expands and contracts as usual, but always stays flush with the bottom of the browser AND allows for content below it when you scroll down. This means I cannot pin it. Is this a responsive design feature only, or is this possible with Muse? Here is an example of what I'm talking about:
http://kinhr.com

This effect is currently not available in Muse.
However, if you only want this effect for the first "browser window worth" of the page, it may work for you to use a full screen background image and then have content and 100% width rectangles on the page scroll over top and obscure the full screen background image as the visitor scrolls down to sections 2, 3, etc.

Can't get full screen images on Flash 10.1 - just white screen

Hi - not sure if anyone can help. I watch Create & Craft via my computer. When you go on site there is a small video box playing the programme with an arrow and "view full screen" in the corner. Normally I just click this arrow and it changed to full screen. However, since downloading 10.1 all I get now when I click on the arrow is a totally white screen - it's really frustrating and any help would be appreciated.

Hi, try turning off the hardware acceleration feature. You can go to youtube and right click on a video and bring up Display Setting and Uncheck it.
It is also recommended to update the graphic and video drivers to the latest versions.
See if that helps.
Thanks,
eidnolb

Full screen image warp - removable?

Similar Messages

Maybe you are looking for