Full screen mode: Picture becomes for one second blur

Now I noticed an additional strange behaviour.
I rendered all preview during the day.
I review all my pictures in full screen mode:
Open next picture
The whole picture is sharp
One second later: The picture becomes a little bit blur
An additional second later: The picture is sharp again
Open next picture: same happens again...
Open previous picture: It does not happen
Any idea?

Barteg wrote:
But Bridge has a much better preview handling and better performance then Lightroom.
It does also automatically update the previews. And you don't have to invoke that manually :-(
Indeed. - I've always had a love/hate relationship with Lightroom - so cool in so many ways, and falls short in so many others...
If you're going to use it, you have to work around (or work with/within) it's limitations... - sorry.
Rob

Similar Messages

Full screen mode not working for original user

Hi,
Whenever I go to start a full-screen mode in iTunes, iCal, Mail, etc. the program makes the default error sound and doesn't enter full screen. This appears in the console, but I'm not sure how to diagnose it:
21/07/11 9:11:18.253 PM Mail: ___createFullScreenMessageConnection_block_invoke_1: Fullscreen message error: Connection invalid
Furthermore, apps like Mail and Safari get interface glitches, which require a restart of the program to fix.
However, the programs work fine in full screen on other user accounts, but I don't want to have to start a new one and move ~400GB of data between them. Is there any way of fixing this? I've also tried reseting permissions.

Resetting my user preferences hasn't helped either.

How do I get full screen mode to work on my second monitor?

I have a MacBook Pro with Lion, and I want to open my apps fullscreen on my larger display. However, full screen always defaults to MBP screen.

John101,
welcome to the Discussion forums.
The Image Adjustment feature works for me on both image placeholders and dragged-in images. Did you "mark" the image, so that small squares appear around it?
Regarding your second question: the problems are solved in 10.4.4 (see http://discussions.apple.com/thread.jspa?messageID=1496754&#1496754), so you might consider an upgrade.

"Full Screen Mode" in Adobe Reader XI for Windows 8 loads way too slow!

I recently got a new laptop with Windows 8, after having used Windows Vista for years. I installed Adobe Reader XI for my new computer. Before, I used Adobe Reader X on Vista. I used Adobe Reader "Full Screen Mode" to read the nice-looking Bible chapters I created with internet audio from Biblegateway.com. In Vista, the "Full Screen Mode" appeared quickly, before the audio fully started, so I could see the text in time for the reading.
However, with Windows 8, "Full Screen Mode" takes around 5-10 seconds to appear at all, and a black screen is present throughout the wait. It does the same thing when I hit "escape" to exit "Full Screen Mode" as well. I even uninstalled Adobe Reader XI from my new laptop, and tried using Adobe Reader X, even though it is not recommened by Adobe to do that on Windows 8, in order to test the speed of "Full Screen Mode" there. Adobe Reader X had the same problem! I do not know if this can be fixed, but I am pretty unhappy about it! I enjoyed the "Full Screen Mode" with my PDF chapters and the online bible audio! Finding that function for the first time with Adobe Reader X was a delight for me! It gave the reading a theater feel!
Has anyone else here had a similiar problem with "Full Screen Mode" loading way too slow on Windows 8? I am very disappointed! If this cannot be fixed by a user, is there a place to complain to Adobe and make a recommendation for software improvement? Thank you!

From: Test Screen Name [email protected]
Sent: Sunday, August 04, 2013 11:32 AM
To: gunner0490
Subject: I'm not able to open PDF files in Adobe Reader XI.
Re: I'm not able to open PDF files in Adobe Reader XI.
created by Test Screen Name <http://forums.adobe.com/people/TestScreenName> in Adobe Reader - View the full discussion <http://forums.adobe.com/message/5565198#5565198

Listen for Full Screen mode

I have a FLVPlayer with a skin on stage and I want to listen for the player going into full screen mode when the skin's fullscreen button is clicked. And I want to listen for it going back to normal but I think that is easy enough, I just listen for the escape key, I think. How do I do that?

not the browser
im using a stand alone swf player
Date: Mon, 9 Apr 2012 09:05:51 -0600
From: [email protected]
To: [email protected]
Subject: Listen for Full Screen mode
    Re: Listen for Full Screen mode
    created by kglad in Action Script 3 - View the full discussion
you should not try and control a user's browser window. but, if you insist, you'll need to use javascript.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4322220#4322220
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4322220#4322220. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Action Script 3 by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Full-Screen Mode: Cannot switch to full-screen mode

hi. i tried to run the DisplayModeTest.java file in the Full-Screen Mode Tutorial, and i got this exception:
Exception in thread "main" java.lang.InternalError: Could not get display mode
   at sun.awt.Win32GraphicsDevice.getCurrentDisplayMode(Native Method)
   at sun.awt.Win32GraphicsDevice.getDisplayMode(Win32GraphicsDevice.java:330)
   at DisplayModeTest.<init>(DisplayModeTest.java:117)
   at DisplayModeTest.main(DisplayModeTest:237)and for all other programs that try to switch to full-screen mode i get similar ones (although isFullScreenSupported() returns true). any ideas why this error is thrown and how to fix this?
i use a j2se 1.4.1_03 on a win2k machine (single-monitor, single-processor, etc... nothing fancy).
thanks,
__blackwolf__

the solution was to use WinXP :) more seriously, i got an email from a Java developer yesterday and he told me that there is a bug they have to fix, and for now it won't work if you dont have DirectX (>= 8.1 ?), full-hardware acceleration (for the video card) and who knows, maybe some other requirements. try running the program with
java -Dsun.java2d.noddraw=true <class>this makes Java avoid using DDraw -- should make the program slower, but runnable...
i have another problem though: cannot run it on a RedHat Linux 9. apparently, isFullScreenSupported() returns false, but this is bullshit, because i have other (non-Java) programs that use exclusive full-screen mode (mplayer, for example). anyone knows how to make it work? thanks.

(Chrome Like) Auto-Hide Tab bar in Safari Full Screen mode

Is there a plugin or some other way to auto hide the tab bar in Safari fullscreen mode like the way Chrome does?
This is the only thing stopping me from using Safari, it's way smoother than Chrome and feels much more native to Lion, but the fact the tab bar just keeps hanging there is annoying.
I tried the Cmd+I method mentioned in the community, but it only works when you're only opening one tab, if you open several tabs, the tab bar will show up again. It also comes back up once you exit Full Screen mode.
Thanks for your help !

Hello myzzzl, this is normal behavior in full screen mode, you can set the [http://kb.mozillazine.org/Browser.fullscreen.autohide browser.fullscreen.autohide] in about:config to False, to change that, but if you do that tabs and location bar is enabled in full screen mode.
wait if another contributor/helper give you a code which I don't know.
thank you

Full Screen mode and two monitors

I consider this an oddity in Lion. I have two monitors. If I have Mail open in the left one and let's say Address book on the right one, and I put Mail into full screen mode, the other monitor goes gray. So . . . no way to have one monitor in full screen mode and still use the second monitor!
RW

This is Apple's warped sense of humor about how full screen should work. Aparrently the designer only uses tablets so has no clue how the real world works.
This is totally hated by most power users but, alas, Apple aren't doing anything about fixing this patently broken design, let alone admitting that they could have made a mistake.
Your options are to either put up with it or back out to Snow Leopard.

Dialog hidden automatically when browser is in full screen mode

Hello all,
I have an applet which shows a modal dialog automatically. It works fine when the applet is shown in the IE browser in normal mode. The window disappears automatically within few seconds when the browser is in Full Screen Mode.
Does any one has faced this peculiar problem ?
I am using Internet Explorer version 6.0
Java plugin 1.4.2_05
Thanks,
Surya.

maybe cuz only one window can be on top in full screen mode?

Apple Flags in Full Screen Mode?

I'm probably missing this somehow.... but can one apply a flag or color label when in full screen mode?

Thanks for all of the help here. Part of the problem was that I was using some of my own keyboard shortcuts and had set "/" to apply vignetting .
Got that fixed and am ready to go now. Thanks again for the replies.

Starting Java app in full-screen mode.

Hi!
How can I start a Java application in full screen mode?
Thanks for help
Stefan

Did you mean Full Screen Exclusive Mode (so that you can do page flipping, etc...)?

Today, when using the full screen mode, when I switch out of it, its automatically returning to full screen mode one second later. And ideas?

Lightroom is acting up today. If I enter the fullscreen mode to view images, when I try to exit out of it back to the library or develop mode, after one second its returning back to the full screen mode. The only way to exit is to command Q. Any ideas?

Found this on another thread. Havent tried it yet, but am about to.
4. Re: lightroom 5.4 gets stuck in full screen preview?
mohammedabidally Jun 1, 2014 10:53 PM (in response to freophotos)
Hi ye I followed the procedure given here https://forums.adobe.com/inbox?objectType=2&objectID=6355272 and it worked for me.
You need to do it with the cursor.....
"restarted Lightroom then using the menu with cursor only (NOT THE F KEY) I went to window …. Screen mode….. and tried the various modes.. Screen Mode with Menu…..Full Screen…. then the Full Screen Preview (this is was my issue) Once in Full Screen Preview I got out of it using the escape key which worked…. Then I hit the F-Key which again took it into Full Screen Preview then I tried the F-key to get out and it worked!!….. "

Preview full screen mode/slideshow is great, except one thing

As an owner of a 13 inch screen Macbook Air, I love the full screen slideshow mode. It's especially cool to page through a PDF with the three-fingered side swipe motion. But one annoyance is that every time I go into full screen mode with a PDF, I have to click the Maximize Size icon. Is there any way to set a preference to maximize automatically when entering full screen mode? If this isn't possible, I hope this becomes a feature soon.

I don't know, since I rarely use it w/19" monitor, but you can file an enhancement report (or bug report) with Apple, via its Bug Reporter system. Join the Apple Developer Connection (ADC)—it's free and available for all Mac users and gets you a look at some development software. Since you already have an Apple username/ID, use that. Once a member, go to Apple BugReporter and file your bug report/enhancement request. You'll get a get a Bug (ER) ID number; thus, starting a dialog directly with engineering.

Why is one of my dual screen grayed out when in full screen mode on the other?

I just added a second monitor for an extended desktop. When I go into full screen mode on one the other greys out. Is there a way to fix this or am i stuck? thanks!!!

No that is just the way it is. Apple still can't figure out how to do full screen apps. When you put any app into full screen mode it make a second desktop to run that app on. When that happen the second monitor, in a dual monitor setup, has nothing to do as everything is on the main monitor in different desktops.
You'll have to just expand the app to the max window size instead of going into full screen. Then you can drag/place different apps on each monitor.

Any 3rd party utilities that fix full screen mode for multi-monitor users?

I am a multi-monitor user. As multi-monitor users know, full screen mode is basically useless since if you try to go full screen on one monitor, it causes the other monitor to go blank and become unusable (at least with most programs). Are there any 3rd party utitilities or fixes for this?
Thanks

Spaces, which is what this functionality stems from, was limited in that it used your entire setup and switched all of the screens over; space to space. I never used spaces because I always had multiple monitors and I was always working with multiple apps simultaneously that I wanted to be able to reference while working on the others.
Now they call Spaces, "mission control" and changed the appearance of it, but the functionality remained the same, each workstation comprised all of your monitors, and would switch over all of them when switching to a new "Desktop".
Fullscreen apps wrongly assumes that it can take the functionality of the afformentioned MS/Spaces and use it for one app, negating the whole idea of why someone would have multiple screens (real estate to work with other applications).
If they stop considering multiple monitors as one Workspace, they can then make it so they are asynchronous "tablets" instead of one conjoined entity.
So, you say people have been asking about this for 2 years, I've been asking for this for 5!
The issue here is, the only answer is to not use it. Making Mission Control and Fullscreen apps completely ignored by people like us, where I could be using both functions to glide around my work station and three monitors, mixing and matching which apps I want to be viewed on each separate monitor, to perform one single task; together.
It would actually reward people who wanted to utilize Thunderbolt technology and have more then one monitor.
There is no telling why apple chose to push out something that would only support the casual user, with one display, but the only direct way to let apple know that we feel limited by the OS is to send feedback. Even though it seems that we are powerless in this situation, I hope that they do consider how to make this function better.
</rant>

Full screen mode: Picture becomes for one second blur

Similar Messages

Maybe you are looking for