Full screen plugin or add-on code works for every page except the start page ?? special containers on the new start page ?

Use Matt Brubecks Full screen plugin or just write a new Addon for Firefox for android (23.0)
Load add-on.
If you are on any tab other than the awesome screen.. it works and goes to full screen (although there are minor issues with container layout)
if you start the browser with no tabs selected.. i.e it falls back to start screen (awesome screen), then it does go to fullscren.. but leaves an ugly grayy bar on top where the awesome bar used to be..
Looks like the awesome screen is using a different container layout and has 2 different containers
Any ideas..
Basically I just need the browser to go to full screen without the gray bar showing up

Thanks allen222! I've been banging my head against this issue as well - glad to hear it's fixed in Mavericks - was planning to upgrade shortly.

Similar Messages

WRT110 works for every website except ONE after login, help please

I have a WRT110 version 1.0
It works for every website, except one. And it works for that one website just fine, until I login. When I enter my username/password it accepts it then redirects me to the companies landing page. I can see that because the URL loading changes and it shows the Title in the page which indicates it connected, but then it just sits there 'loading', in the status bar I see the message: "Waiting for tools.domain.com... to load" or something like that. and it takes like 5 to 10 minutes, no joke, then it loads.
If I connect my computer directly to the modem and bypass the router, then it loads just fine, very fast like everything else.
But then when I re-connect my router and refresh the page, it does it again, takes forever, but I can instanly see the title of the page in the title bar.
It works on every computer that I connect trough the mobile hotspot on my 4G verizon phone. but if it is through the router, every computer takes 5 to 10 minutes. Literrally.
Anyone have this happen to them? If so, how did you fix it?
Thanks,
Richard

Try the following settings:
# Open up the browser on the desktop and on the address bar type 192.168.1.1 that will open up the Router setup page…
# Lower the MTU (Maximum Transmission Unit) from 1500 to 1400 or less (usually found on your router's main/ basic setup page)
# Then click on Security tab disable SPI Firewall Protection, uncheck Filter Anonymous Internet Requests...
Now check the connectivity status.

When I open iTunes it will automatically go to full screen mode. I can't work out how to turn this off. Only iTunes opens to full screen mode.

When I open iTunes it will automatically go to full screen mode. I can't work out how to turn this off. Only iTunes opens to full screen mode.

Go to System Preferences (under the Apple logo in the menu bar). Choose "General". Click "Always close windows when quitting an application".
That should fix it.

ITunes 10.4 full screen with Win7-64bit doesn't work correctly.

iTunes 10.4 full screen with Win7-64 doesn't work correctly. I have the Windows taskbar on the left side of my screen. Maximized iTunes is panned to the left.

Same issue here. When the Windows taskbar is position on the top of the screen and then the iTunes windows is maximised, it's position is as if the Windows taskbar is at the bottom of the screen so the top of the iTunes window sits under the taskbar.
For those wanting a workaround, hold shift and right click the iTunes icon in the taskbar/quick launch bar and click restore, at least then you can adjust it to be full screen manually.
System:
Windows 7 Ultimate x64
iTunes 10.4
ATI 5750 video card

Does somebody know how to get to the desktop via hot corners whilst being in full screen mode? it doesn't work on my mac... :/ thx for helping!

does somebody know how to get to the desktop via hot corners whilst being in full screen mode? it doesn't work on my mac... :/ thx for helping!

bump

I have a mac OSX desktop version 10.6.8 and all of a sudden I can't get a full screen view in Safari when I ask for help the response is use the arrows on the top right of the screen ... I don't have them ... can anyone help?

I have a mac OSX desktop version 10.6.8 and all of a sudden I can't get a full screen view in Safari when I ask for help the response is use the arrows on the top right of the screen ... I don't have them ... can anyone help?

Hi Mary,
I don't remember those arrows in 10.6, only 10.7 & up!?
I have 10.6.8, as you do. To make your Safari full screen, make sure you have the left hand side of your safari page moved all the way to the left. Then move your cursor to the BOTTOM RIGHT CORNER of the safari page, and simply drag your page towards the lower right hand corner of the screen. NOTE: you will see a series of lines on the bottom right corner of the page, indicating where to place you cursor arrow.
By wuzradioman here...
https://discussions.apple.com/thread/4218928?start=0&tstart=0

Please make changes for contact image for for full screen... I bought Iphone Only for full screen contact image so please make changes for full screen contact image...

Please make changes for contact image for for full screen... I bought Iphone Only for full screen contact image so please make changes for full screen contact image...

I bought Iphone Only for full screen contact image
Is that so? So you don't use ANY of the other features of the iPhone? You don't use the internet, apps, play games, make calls, take pictures, or ANYTHING else at all? You just wanted full-screen contact image?
I don't believe you...
Please make changes for contact image for for full screen
Tell Apple: http://www.apple.com/feedback/

When exporting files to web pages Aperture keeping losing files, so for instance, if I choose to export 600 images to a new web page, it might do 524 images but not the full 600. I've tried resetting Aperture, it's the latest version etc etc. Help please!

If anyone can help me with this I would be seriously grateful.
When exporting mutliple files to web pages Aperture keeping losing files, so for instance, if I choose to export 600 images to a new web page, it might make 524 pages but not the full 600. I've tried resetting Aperture and its persmission and am using the latest version of 3.
I have 3600 images which I need to upload as sublfolders, each with their own URL and at the moment Aperture is dropping of anything from 1 to 90 images.
This is critical as people need to see each and every on of these images online. So if a file has 600 photos in it, Aperture should make a URL with 600 full image pages. And this is what it's not doing. On small files, say 30 or so it seems to work well, it's when it gets to more than that the problem starts.
I've used Aperture in the past under previous versions and not had this problem.
Any help would be great.
Thanks.
Bob.

Hi Jack,
Thanks for responding (as it seems as though no one else has been able to provide any insight as of yet)! Not sure if you saw my recent post, but the version of Aperture on the 2008 MacBook has been upgraded to 3.1.2 (not sure how; I bought it in 2009, but only have OS X 10.5.8... which apparently can't house 3.1.2 of Aperture, but hey, like many other anomalies i'm encountering, I'm no longer surprised!). I am unable to upgrade it any further, as it warns me that my OS X does not fit the requirements. I exported the projects as libraries; however, like I posted before, apparently these are from too old of a version for the new Aperture (3.3.1) to handle and import.
It's getting to the point where I'd almost pay to upgrade the OS X on my previous MacBook (10.5.8) to something newer in order to THEN update Aperture to a newer version; however, my previous MacBook simply cannot handle this (the specs are awful -- hence my decision to save up and upgrade to the newest MBP with Retina).
I've spent hours upon hours transferring files, libraries as projects, previews, versions, even masters (though, apparently some of them aren't accessible?) with no luck. I've rebuilt the library and reprocessed everything. And this is all after having to return one MBP already since Aperture 3.3.1 is glitch-y as it is, and froze everything for having a "managed library". So, now that I know that I have to deal with a referenced library in Aperture... I just need to actually transfer my previous library to my new one (hopefully WITH adjustments since these are years worth of photos and work).
Again, any help is appreciated. I've lost enough sleep, time, and vision health over this at this point.
Also, I know Migration Assistant is an option, I was told that it wouldn't work properly anyway because of the different operating systems, and the potential for problems.

The rotation feature works for every app on my iPad except mail. Mail always rotated just as everything else did until recently. I have no idea what I might have done to change this.

The rotation feature on my iPad works for all apps except my mail. I've had this iPad for at least a year and this problem came up a few days ago. Mail always rotated and I can't think of anything I've done differently to cause this change.

Reboot the iPad and see if that helps.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
If that doesn't help, quit the mail app completely and restart the iPad.
Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help

My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help

If after you charge it for about three hours and it only last about five minutes the battery is probably dead or there could be another hardware problem. I would go back to the Apple store and ask them specifically how can it be OK if the fully charged battery only lasts five minutes.

Printer works on every program except trying to print anything from Firefox. Blank pages everytime.

Using Windows XPproffesional & current Firefox 4.0.1. Printer works on every program except anything from Firefox,.blank page every time. When I hit File>Print; the "Print Frames" section in lower left hand box has no options checked and is unaccessible. Printing works fine in Explorer.

edmeister; thanks for trying to help. I reset the printer per the instructions you provided and also checked that I wasn't printing to file. Even unistalled Firefox, and installed 3.6; same thing happened. So, I uninstalled 3.6 and reinstalled 4.0; still having same problem. But, can still print in IExplorer?

After the most recent iPhoto update, I keep getting the following error: "iPhoto quit unexpectedly while using the Sonix SN9c201 webcam plugin." This seems to happen after *every* iPhoto update. Is there a fix on the way?

After the most recent iPhoto update, I keep getting the following error: "iPhoto quit unexpectedly while using the Sonix SN9c201 webcam plugin." This seems to happen after *every* iPhoto update. Is there a fix on the way?

As you can see below, when I right click, I have no such option. In the User Account Settings, I'm operating as the "System Administrator".
Any other suggestions?

My iPod shuffle, which I prchased in 2009 only worked for a short time so I put it back in the box and just recently took it out. I will not charge and the power light does not come on. It was faulty from the start and thought I was out the money I paid.

My iPod shuffle only worked for a short time. It will not charge and the power light does not come on. Bought it in 2009. Put it back in the box and in my desk. Recently tried to get it to work again but no luck. Anyone else have this problem? Very disappointed with the product although my wifes work perfectly.

Can't say I haven't done the same kind of thing...keep finding things I had every intention of...
If you have the chance stop by an Apple Retail store and talk to them about it...they often work deals for replacement of out of warranty non-working items for prices around half price. Won't hurt to stop by and see what they will do for you.

[svn] 3687: Add some messaging tests for scenarios that involve subscribing to a destination , disconnecting from the channel currently being used and resubscribing to the destination .

Revision: 3687
Author: [email protected]
Date: 2008-10-16 11:23:39 -0700 (Thu, 16 Oct 2008)
Log Message:
Add some messaging tests for scenarios that involve subscribing to a destination, disconnecting from the channel currently being used and resubscribing to the destination. There is an issue that is causing the streaming/multipleDisconnectsResubscribesTest.mxml test to fail that I will log a bug for.
Added Paths:
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/longpolling/
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/longpolling/disconnectResubscribeJMSTest.mxml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/longpolling/disconnectResubscribeTest.mxml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/longpolling/multipleDisconnectsResubscribesTest.mxml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/polling/
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/polling/disconnectResubscribeJMSTest.mxml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/polling/disconnectResubscribeTest.mxml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/polling/multipleDisconnectsResubscribesTest.mxml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/streaming/
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/streaming/disconnectResubscribeJMSTest.mxml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/streaming/disconnectResubscribeTest.mxml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/streaming/multipleDisconnectsResubscribesTest.mxml

Revision: 3687
Author: [email protected]
Date: 2008-10-16 11:23:39 -0700 (Thu, 16 Oct 2008)
Log Message:
Add some messaging tests for scenarios that involve subscribing to a destination, disconnecting from the channel currently being used and resubscribing to the destination. There is an issue that is causing the streaming/multipleDisconnectsResubscribesTest.mxml test to fail that I will log a bug for.
Added Paths:
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/longpolling/
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/longpolling/disconnectResubscribeJMSTest.mxml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/longpolling/disconnectResubscribeTest.mxml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/longpolling/multipleDisconnectsResubscribesTest.mxml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/polling/
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/polling/disconnectResubscribeJMSTest.mxml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/polling/disconnectResubscribeTest.mxml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/polling/multipleDisconnectsResubscribesTest.mxml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/streaming/
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/streaming/disconnectResubscribeJMSTest.mxml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/streaming/disconnectResubscribeTest.mxml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/unsubscribeScen arios/streaming/multipleDisconnectsResubscribesTest.mxml

I keep putting the code in for a i tunes card and it keeps telling me the card has been redeemed but i cant see any money on my account

i keep putting the code in for a i tunes card and it keeps telling me the card has been redeemed but i cant see any money on my account

The receipt usually takes more time to receive. I got my receipt from about 7:00pm yesterday at about 10:00pm today.

Full screen plugin or add-on code works for every page except the start page ?? special containers on the new start page ?

Similar Messages

Maybe you are looking for