Full screen problem, with embedded flash player in a flash player
Hi,
I am having an issue with the flash video player embedded within a flash player movie. The issue is that when my main flash is in Full Screen mode and I try to open that screen where embedded movie player is, when it is opened the inner movie player covers the complete screen, on the other hands it should show that embedded player in normal condition with other background stuffs.
Can anyone guide me what step should I take to avoid this or if it is possible to do this kind of scenario in Full Screen mode or not?
Looking forward to your prompt help.
Best regards,
Irfan
likeeak wrote:
I want to know how to disable hardware acceleration by use ActionScript 2.0
I don't know if this is possible; perhaps you should ask in the ActionScript forum?
Similar Messages
-
Full Screen Problem With Dual Monitor Viewing
I have a 64 Bit system, Chrome browser and with flash player built in. I am attempting to view videos on a 2nd monitor while working on the primary monitor. I have tried this on various sites, TNT.tv, USANetworks.com, etc... I select full screen viewing. A message is displayed to exit full screen press escape. However, when I attempt to do anything else automatically exit full screen on the second monitor. This should not be an issue and with the way most people view video online, they are doing so on a 2nd monitor or TV. I have done a google search and it is a common problem, but there is no solution that seems to work.
I have just posted the same question - missed yours.
Adobe could you take a look into this - I think solving this problem can't be that hard.
jef -
I'm running FF 4 Beta 8 with the latest Flash player (10.1.102.64). When I play YouTube videos, the video is loaded, starts, and plays okay, but when I move my cursor around within the Firefox window, portions of the window black out under where the cursor travels. FF tabs and buttons will black out, or parts of the YouTube page (but not the video). CTL-ALT-Del to bring up Windows Security Panel, then CANCEL will restore the Firefox window, plus the YouTube page correctly (ie black is gone and window has been redrawn correctly). I can open up new tabs and replicate the problem multiple times. I've also experienced this problem with embedded YouTube videos (though it's easiest to replicate the problem direct from the YouTube page.) I don't experience this problem at all with FF 4 Beta 8 in Safe Mode, nor the latest FF 3.x.x. I have tried uninstalling and re-installing the Flash plug-in. Anyone have any ideas?
Problem involving videos played from the YouTube site is much less noticeable after upgrading from FF 4.0b8 to 4.0b9, but still occurs with embedded YouTube videos, where blacking out of other portions of the window still happens.
-
Pixelated video and upscaling problems with ringing artifacts on Youtube since Flash player 10.3
Pixelated video and upscaling problems with ringing artifacts on Youtube since Flash player 10.3. Flash palyer 10.2 was the last version without the listed problems.
For anyone interested you may see here what 'ringing artifacts' means : http://en.wikipedia.org/wiki/Ringing_artifact
More about Image artifacts/errors related to video scaling here : http://en.wikipedia.org/wiki/Video_scaler
Test configuration :
Windows 7 x64
Intel HD Graphics with lastest available drivers from manufacturer.
Any solution from Adobe?Could you please open a new bug report on this over at bugbase.adobe.com? Please post back with the URL so that others affected can add their comments and votes.
Thanks,
Chris -
I am having problems with certain websits that require adobe flash player
Please don't start the 1 millionth thread on this subject, which has been answered over and over and over and over and over and over and over.........Use the search bar and type flash and you'll see thousands of posts on this.
-
[Non IE Regression] Support for full screen mode with multiple monitors
This seems to be a regression with Flash Player v11.2.202.x (for all other browsers).
With Internet Explorer it is still working.
http://kb2.adobe.com/cps/890/cpsid_89050.html
== Support for full screen mode with multiple monitors ==
Full screen content will remain in full-screen on secondary monitors, allowing users to watch full-screen content while working on another display.
Tested on Windows 7 x64 SP1 with:
- Internet Explorer 9
- Firefox Release, Beta, Aurora, Nightly
- Opera 12 build 1116
In bugbase.adobe.com I cannot choose v11.2.xPlease vote for it If you have the same problem:
https://bugbase.adobe.com/index.cfm?event=bug&id=3016912
Thanks -
Problems with embedding swfs into Director 11.5
Hello everyone,
I am hoping someone can help me and please bear with me - I don't know a lot about director - I can do some Lingo and get around in the program to make things work.
Right now I am working on an interactive presentation where the user can click a button to view an animation. I am using Director 11.5 for my presentation and have made my animations in After Effects CS3 -- from there I converted my .mov files to .flv files using the Adobe Media Encoder CS4... then I took my .flv file into Flash and published it as a swf file.
The problem that I am having is that when I play the presentation (within Director and after publishing the .app/projector file) the swf files are playing - but there is all this glitchy-artifact stuff all over them. Does anyone know why this would be happening? When I play the swf files in the flash player they look great. Before, when I was using Flash MX and Director MX, I never had any problems with embedding my swf animation files - and they played great - without any artifact. Any and all help would be much appreciated as this project is due in the next few days and I would prefer to figure out a solution rather than uninstalling Flash CS4 and Director 11.5 - and going back to MX.
I toyed with the thought that my video card isn't good enough but I tested the .app file on another machine and the glitchy-artifacts were still there. I have attached a jpg showing the artifact that appears.
I am running Mac OS X 10.5.7
Dual 2 GHz G5 PowerPC
ATI Radeon X800 XT
Thank you!Sorry... here is the image again and I think the problem might be my machine -- it is very old (~4+ years) and when I tested my .app on a newer intel mac here it worked fine... but maybe I am missing something -- it seems odd that I can see the swf fine in flash player but it is glitchy when played through director or the .app projector file
-
Full Screen Mode with Menu Bar -blue
For some reason the 'Full Screen Mode with Menu Bar' option has a blue background now. The background used to be gray, and then one time i opened up Photoshop and now the background is blue. It is very annoying and affects my painting. The grey was neutral, now it is blue so my colors are going to appear off.
If you don't know what i mean: Open Photoshop, make a canvas (new image) Hit the key "F" on your keyboard 2 times so the canvas takes up the entire page but the menu bars are still up. The color around the canvas is Blue, when it has ALWAYS been gray.
Please someone tell me how to fix this.I found out a solution. If anybody ever encounters this problem just right click on the background and select Gray. :)
-
Problems with embedding .flv files in DW CS4....
I inserted an .flv file into my DW CS4 html page. I previewed it in my browser, and it worked for a little bit, but now it's not working in any browser, I'm not sure what happened. I included a screen shot in the attachments of what was happening in all the browsers.
Thanks for any help,
Thank you,
AzaNot sure if that was meant for me
You can tell who was the intended recipient by looking at the header of the message -
6. Sep 10, 2010 6:50 AM in response to: FordGuy48 <<----
Re: Problems with embedding .flv files in DW CS4....
A link to the page would help us diagnose your problem.
Safari tells me that this file -
FLVPlayer_Progressive.swf
is not where you have told the page to expect it. Did you upload it? -
It's a Magic Mouse question. I have set this up in Preferences by ticking Swipe between pages with one finger and also Swipe between full-screen apps with two fingers, however when I try to do the latter, the 2 finger swipe will take me from the app that I am on to the dashboard only and not to my other open apps.
I also find that Smart zoom only works with some apps, for instance not with Word docs or email.
How can I correct this please?Just figured out it also does not work with the Mail app.
-
A problem with importing layered PSD file into Flash
Hi.
There's a problem with importing layered PSD file into Flash.
If I import a layered PSD file, some part the color of the lower layer is shown at the edge of objects or shadows. Instead, if I crop each layers first and import them, there's no problem.
If the higher layer has brush or transparent effects, it becomes worse.
Any help with this problem?
Thanks.How was the original art created? Was the original RGB or CMYK? What is the resolution of the Photoshop file? Flash only works well with RGB and 72 pixel per inch resolution. If your original art is not set this way, then Flash will attempt to convert it as it imports it. Flash uses the sRGB color space. You'll get the best color translation if your Photoshop file is using this color preference.
-
Hi i have a white screen problem with my macbookpro mid2009 15".I installed a ifixit battery and i think it screwed up one owc ssd drive.I just installed a new one and at 13min battery left it shut down and then all i got was a white screen...I tried every feasible command and all i got was some more white lol.I dont have my tools to open the case right now but do you guys think my cpu board is done?
Have a look at this help document for suggestions that you haven't tried yet:
http://support.apple.com/kb/TS2570 -
Full Screen Mode with Window Tabs? (Mac)
I have never been able to use Full Screen Mode / Full Screen Mode with Menu Bar because my Window Tabs disappear.
Until now I have ignored this but I really want to start making the most of my screen space. I don't understand how people can go into full screen mode without tabs of their open documents. It makes the experience completely useless to me and I can't believe I can't find any solutions online. I feel like I am overlooking a simple button somewhere on the screen thinking "surely Adobe would include this!?"
Please help.
I am currently on 13 inch MacBook Pro using CS6 beta.RichardOverton wrote:
Thanks for the reply, but I already know of this 'workaround', and it isn't a solution for me. There is no functionality in cycling through windows with no idea when you will arrive at the correct PSD. I usually have quite a few open at the same time and I am constantly skipping between them nice and simply with the tabs...Please Adobe just add an option for tabs, all the other components of the layout are optional in full screen, why not tabs?
Putting in a feature request for tabs in full screen mode is a good idea. One thing Photoshop could do in full screen mode is reveal the menu bar and tabs when the mouse is near the top of the screen. This is sort of an ad-hoc standard in tabbed apps like Chrome and Firefox. Even Adobe Photoshop Lightroom reveals the menu bar in this way, but Photoshop continues to use the same full screen behavior that it had back in the 1990s, when it was one of the few full-screen apps available.
One workaround is to turn off Window > Application Frame, and when you're in full screen mode use Lion's Mission Control to pick a specific window. This works even better if you use or assign a shortcut to view the windows of a single application.
c.pfaffenbichler wrote:
how does everyone else cope?
As a career-long Mac-user I am not accustomed to tabs and therefore don’t need or use them.
Tabs have been in Mac apps, such as Apple Safari and Final Cut Pro, for many years. -
Full Screen Mode with Menu Bar view mode appears with Blue Background??
Can someone please help me figure out what I did exactly to unintentionally change the "Full Screen Mode with Menu Bar" view mode so that it now appears with a Blue Background, instead of the default gray one....and better yet, can someone let me know how I can switch it back to displaying the default gray background instead?
Any suggestions would be greatly appreciated... Thanks!>let me know how I can switch it back to displaying the default gray background
SHIFT-Click the Paint Bucket pool in that area using the gray of your choice (e.g. 132, 132, 132).
(That's probably what you did to turn it blue.)
Or, more drastically, you can trash your preferences. -
Hi,
I have problem with embedded objects which contained embedded objects.
When I create an Object in the persistent memory and commit this object I get the following error:
ORA-22805: cannot insert NULL object into object tables or nested tables
In the constructor of my persisten object I create the embedded members in the transient memory:
ATestPersObj::ATestPersObj() : m_count(0), m_lang(NULL), m_cost(NULL) {
m_lang = new AEnumLanguage_OraType();
m_cost = new AAmount_OraType();
}Or when I dereference a reference I get this error:
ORA-00600: internal error code, arguments: [kokeicadd2], [16], [5], [], [], [], [], []
Can somebody give me a hint?
I've defined the following Type:
CREATE OR REPLACE TYPE AENUM_ORATYPE AS OBJECT (
VALUE NUMBER(10,0)
) NOT FINAL ;
CREATE OR REPLACE TYPE AENUMLANGUAGE_ORATYPE UNDER AENUM_ORATYPE (
) FINAL " );
CREATE OR REPLACE TYPE ACURRENCY_ORATYPE AS OBJECT (
ISONR NUMBER(5,0)
) FINAL ;
CREATE OR REPLACE TYPE AAMOUNT_ORATYPE AS OBJECT (
CCY ACURRENCY_ORATYPE,
LO32BITS NUMBER(10,0),
HI32BITS NUMBER(10,0)
) NOT FINAL ;
CREATE OR REPLACE TYPE ATESTPERSOBJ AS OBJECT (
COUNT NUMBER(4),
LANG AENUMLANGUAGE_ORATYPE,
COST AAMOUNT_ORATYPE
) FINAL ;
oracle::occi::Ref<ATestPersObj> pObjR = new(c.getConnPtr(), "TTESTPERSOBJ") ATestPersObj();
pObjR->setCount(i+2001);
pObjR->setLang(AEnumLanguage(i+1));
pObjR->setCost(AAmount(ACurrency(), 2.5));
c.commit();
c.execQueryRefs("SELECT REF(a) FROM TTESTPERSOBJ a", persObjListR);
len = persObjListR.size();
{for (int i = 0; i < len; i++) {
oracle::occi::Ref<ATestPersObj> pObjR = persObjListR;
pObjR->getCount();
pObjR->getLang();
c.commit();
With kind regards
Daniel
Message was edited by:
DanielF
Message was edited by:
DanielFHi,
I have problem with embedded objects which contained embedded objects.
When I create an Object in the persistent memory and commit this object I get the following error:
ORA-22805: cannot insert NULL object into object tables or nested tables
In the constructor of my persisten object I create the embedded members in the transient memory:
ATestPersObj::ATestPersObj() : m_count(0), m_lang(NULL), m_cost(NULL) {
m_lang = new AEnumLanguage_OraType();
m_cost = new AAmount_OraType();
}Or when I dereference a reference I get this error:
ORA-00600: internal error code, arguments: [kokeicadd2], [16], [5], [], [], [], [], []
Can somebody give me a hint?
I've defined the following Type:
CREATE OR REPLACE TYPE AENUM_ORATYPE AS OBJECT (
VALUE NUMBER(10,0)
) NOT FINAL ;
CREATE OR REPLACE TYPE AENUMLANGUAGE_ORATYPE UNDER AENUM_ORATYPE (
) FINAL " );
CREATE OR REPLACE TYPE ACURRENCY_ORATYPE AS OBJECT (
ISONR NUMBER(5,0)
) FINAL ;
CREATE OR REPLACE TYPE AAMOUNT_ORATYPE AS OBJECT (
CCY ACURRENCY_ORATYPE,
LO32BITS NUMBER(10,0),
HI32BITS NUMBER(10,0)
) NOT FINAL ;
CREATE OR REPLACE TYPE ATESTPERSOBJ AS OBJECT (
COUNT NUMBER(4),
LANG AENUMLANGUAGE_ORATYPE,
COST AAMOUNT_ORATYPE
) FINAL ;
oracle::occi::Ref<ATestPersObj> pObjR = new(c.getConnPtr(), "TTESTPERSOBJ") ATestPersObj();
pObjR->setCount(i+2001);
pObjR->setLang(AEnumLanguage(i+1));
pObjR->setCost(AAmount(ACurrency(), 2.5));
c.commit();
c.execQueryRefs("SELECT REF(a) FROM TTESTPERSOBJ a", persObjListR);
len = persObjListR.size();
{for (int i = 0; i < len; i++) {
oracle::occi::Ref<ATestPersObj> pObjR = persObjListR;
pObjR->getCount();
pObjR->getLang();
c.commit();
With kind regards
Daniel
Message was edited by:
DanielF
Message was edited by:
DanielF
Maybe you are looking for
-
How to change a hard drive in a first generation intel Imac?
My hardrive cratered today on my first gen intel. where can I find the info for How to change a hard drive in a first generation intel Imac?
-
How do I remount a 'lost' external hard-drive?
Apologies if the answer to this problem is straightforward - it's just that I've not experienced it before. I've just checked 'Software Update' on my G5 iMac and downloaded the latest security update not realising that a Lacie 500 Gb external hard-dr
-
Please share me the latest Oracle Help files (ora.hlp, sql.hlp, plsql.hlp)
Dear my good friends, Would you kindly share the latest Oracle Help files of Oracle 10g version or show me the url address (http://...) to download those Help files. Some help files of Oracle such as: ora.hlp, sql.hlp, plsql.hlp, etc. Thank you very
-
I tried to use the app tabs but when I reopen my browser they are not there anymore
I added my favorite tabs as app tabs but when I restart my browser they are not there anymore, is that normal?
-
Ipod nano 6th gen. not syncing with itunes match
After the new itunes 11 release I cannot sync my Ipod nano 6th generation with Itunes match without downloading all the songs I want to copy to my ipod to the computer first. It is a little compersome to download 8Gb to my mac just for syncing and af