Full screen view not full image...

When I select full screen on the film strip, I get to
see my image on a black screen with the film strip
underneath.
Now, I also noticed that this film strip also blocks
part of my image. I was actually expecting the viewer
to automatically adjust the size of the images in
such a way that all the images were fully in view
(uncovered by menus etc). Am I missing a setting
somewhere?
You can move the film strip to either side and you can also make it hide and reappear as you mouse over it, like the dock on a Mac. There is a small button on the film strip that is the view mode, the changes availabe are listed there.
Craig

Similar Messages

In PSE4, F11 (full screen view) deselects current image

I hesistate to put this in "suggested features" in case there is a trick I do not know about.
If I am in organizer and decide I would like to have a better look at the currently selected photo, I press F11 for a full screen view.
When I press Esc to get back, not only has my image been deselected, but the thumbnail pane has jumped back to the top so the image of interest is not even on the screen.
This means I have to remember the file name and scroll down again looking for it to get back to where I was.
Is there a way around this?
It would also be nice if the filename could be displayed while in full screen mode as many of my images do not have captions set. And a caption may not uniquely identify the particular file anyway.

Thanks Codebreaker for the "Alt+Enter" trick - that helps a lot.
Brian has isolated the problem well. I was a bit confused that things sometimes seemed to work OK. Unfortunately, showing only files in the selected folder is my preferred mode to make scrolling the thumbnails up and down a bit easier.
It would be nice to think the problem may be solved in a future update, but for now, knowing what is going on makes it easier to get on with the job.
I do not think the other bug, jumping thumbnails, is related because in that case F5 corrects the problem (which it does not do in this case).
I do not quite understand Karin's suggestion. My "Back" button (top left of screen) is greyed out much of the time anyway.

Full screen view not working...please help!

When I try to edit pictures or view them in the full screen, they do not appear. It's just a grey screen with an exclamation point in the middle. Any help that can be offered is much appreciated. thank you.

Murph3g
iPhoto is a database, with a built-in image viewer, version control and lightweight editing. Like all databases it is designed so that you manipulate the data, in this case your photos, via the application. If, as you have done, you manipulate the data via another app., (the Finder), iPhoto loses track of the files and you get the exclamation point.
The point of iPhoto is that you do you organisation in the iPhoto Window - there you can create your albums, slideshows etc., keyword, edit and so on, and leave the File Management to the application.
To correct the problem that currently exists:
In The iPhoto Window:
1. Get rid of the thumbnails that no longer connect to a pic by putting them into the iPhoto trash.
2. Move the pictures from your Originals Folder inside the iPhoto Library Folder to you Desktop, and import them again. (File -> Import)
3. Empty the iPhoto trash (iPhoto -> Empty Trash)
This should at least get you to a point where the thumbnails match to a photo again.
A Note about the iPhoto Library Folder:
In this folder there are various files, which are the Library itself and some ancillary files. Then you have three folders
Originals are the photos as they were downloaded from your camera or scanner.
(ii) Modified contains edited pics, shots that you have cropped, rotated or changed in any way.
This allows the Photos -> Revert to Original command - very useful if you don't like the changes you've made.
(iii) Data holds the thumbnails the the app needs to show you the photos in the iPhoto Window.
Again, any organisation you wish to do, do it in the iPhoto Window. If you have any difficulty achieving something consult the Help or post again on here.
Regards
TD

Image Viewer not showing images

I have image viewer working successfully on several other
sites but I can not get it to work from this one.
I am trying to get a auto looping image show of 4 images.
I tried this initially with 4 images and nothing showed. I
deleted the Image Viewer and attempted it again using a single
image and still nothing shows. I know the image is there because it
appears on another page.
I have uploaded the javascript into a Scripts folder and all
appears fine but no image ever shows.
Can anyone tell me what I am missing? The page is
http://advancedptme.com/jp_test.html

In other words, it doesn't appear that your site is properly
defined in
Dreamweaver.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Ken Binney" <[email protected]> wrote
in message
news:g9j5dk$rep$[email protected]..
> Your page link points to gallery1 in the root folder of
your site, but the
> Scripts folder and the Spry assets folder links are
pointing to one level
> above the root.
>
>
> "D.Devito" <[email protected]> wrote in
message
> news:g9j1no$npv$[email protected]..
>> when i preview my image viewer from dreamweaver in
safari its all fine
>> but once
>> uploaded to the web its just blank
>> all the code is there.. can anyone help me.. please
>>
>> the page is
http://www.lisamoffattphotography.com/gallery1.html
>>
>
>

PSE 9; Fitting image to screen, does not fit image to screen

Hi,
I have some problems since last upgrade of Photoshop Elements 9.
Suddenly, when I am using the editor, when I want to resize the image to fit the screen, it does not do that anymore.
The image does change size, but it is considerably smaller than the screen, (or rather the available area in the editor workspace).
For example, with an image in portrait mode, Fit to screen makes it as 11%, with considerable space above and under the image.
If I zoom this image manually, entering a number 16% fits the screen.
This used to work before.
How can I make it work?
I am sure there is some settiing, but I cannot find it.
And, it seems, that it ceased to work after the last upgrade, a couple of weeks ago. It is now PSE 9.0.3.
Of cause, it might have been something I did that made it cease working.
I don't care. But where is the setting that makes this work?
/Anna

Try dragging out the tab containing the image; so that it floats.
Then drag the triangle corner at the bottom right - you can cover a big part of the screen real estate whilst still keeping the tools pallet and menu bar visible.
You can also click Edit à Preference à General
Then check the item Zoom With Scroll Wheel
That will let you fill or reduce the window contents quite quickly.

Screen shot not saving images

All of a sudden when i take a screen shot i can hear the shot being taken but it is not saving the image? it used to save the image to my desktop but it has suddenly decided to stop. Does anyone know how i can fix this?

That .plist file should exist. Have another look. - Another suggestion, but not a cure, download Capture Me. It is free and works a treat!
Capture Me: http://www.chimoosoft.com/products/captureme/

What is the keyboard shortcut for scrolling page down? In Pages, Safari, etc... Just a single page/ screen view, not all the way to the bottom. Thank you.

Trying to navigate the screen without my mousepad. I have carpal tunnel and early stage arthritis and cannot repeatedly make the appropriate motions to scroll with two fingers. Is there a keyboard shortcut for scrolling up and down line by line or page by page?
Thank you.

Yeah. sorry. those are not correct. ctrl N + P are for home and end line shortcuts. Ctrl V does go down one line. But CTRL arrow up or down do not work in Safari. But thank you very much for the attention and the time...
Note from my first post above -- I did not say to use CTRL arrow in Safari:
For Safari:
Scroll down a line: down arrow
Scroll down a screen: option down arrow
Note from my second post above and from the first link I gave that Control N, P, and V worked for me in Pages as described in the link and in my post:
The link to shortcuts that I gave abaove includes Control N, P, and V for move down a line, up a line and down a page and those seem to work in Pages.

Admin screen will not display images - error on page

We are one step closer to a successful installation but not quite there yet. When we got to htmldb_admin the username/password boxes appear but the images do not display and it states error on page no matter what you try to do. Any suggestions?

Please see errors below from the log file. It appears that it is looking in the wrong directory for the images. Does anyone know where I can set this? I put an alias in htttp.conf but it must be pulling the info below from somewhere. Please help - I am so close (I think!!).
Fri Feb 25 10:45:51 2005] [error] [client 164.156.73.176]
[ecid: 1109346351:164.156.73.176:1660:2092:5,0] File does not exist: c:/oracle/product/10.1.0/client_2/apache/apache/images/htmldbins.small_button_right2.gif
[Fri Feb 25 10:45:51 2005] [error] [client 164.156.73.176] [ecid: 1109346351:164.156.73.176:1660:2268:5,0] File does not exist: c:/oracle/product/10.1.0/client_2/apache/apache/images/htmldbins.small_button_left2.gif
Fri Feb 25 10:14:17 2005] [error] [client 164.156.73.176] [ecid: 1109344457:164.156.73.176:1552:1708:70,0] File does not exist: c:/oracle/product/10.1.0/client_2/apache/apache/htdocs/i/htmldbins.htmldb/oracle_htmldb_logo.gif
[Fri Feb 25 10:14:17 2005] [error] [client 164.156.73.176] [ecid: 1109344457:164.156.73.176:1552:1712:74,0] File does not exist: c:/oracle/product/10.1.0/client_2/apache/apache/htdocs/i/htmldbins.htmldb/builder/1px_trans.gif

PSE8 Full screen view with high-res images

The Full Screen View in PSE8 doesn't seem to cope well with high-resolution images, eg from a full-frame DSLR (eg my Sony A850 with 6000 x 4000 px).
After selecting an image in Organsier and starting Full Screen View the first image is displayed successfully, but clicking the button to move to subsequent images soon results in a "cracked image" symbol. (It's unrelated to the image though - closing FSV, selecting the suspect image and restarting FSV displays it properly).
I get the same symptoms with JPEG and RAW images, and on two Windows PCs. One's XP with 1.5GB, the other is Windows 7 with 8GB.
I've tried maximising the RAM available to PSE8 (in Editor preferences), but it makes no difference.

Here is the solution under Windows 7 64-bit with Photoshop Elements 6 for the new Entry "MaxImageSize":
The Registry-Entries for 32-bit-Programs are saved in
HKEY_LOCAL_MACHINE ... Wow6432Node ...
QWORD-32bit 42C1D8000000
(Hex 1120000000 or Decimal 73551314944)
for a JPG-File up to 10.000 x 10.000 Pixel

Letterbox effect not working in full screen viewer 10.1.2

Hi,
Just updated to 10.1.2 and now the letterbox effect is not visible if i view in full screen but is working in normal interface viewer.
Instead if I keep a png cinemascope 2:35:1 on top of all the layers... in normal viewer its fine. but if i view in full screen (viewer) the cinemascope does not work on the top and only on the bottom it is visible in unusual size...
Plz. help.
Regards,
Arun

hi,
try putting a letterbox effect on any clip... it works well in the viewer display.. but when i go full screen... the letterbox effect does not work properly... the cinemascope is not visible on top but only on the bottom in an unusual size.
so instead if i put a png overlay image on top layer in timeline as a cinemascope... i get the same problem if i go full screen...
Pl. try the letterbox effect option and let me know if this is an issue with the software of is it specific to me ?
Project properties : 1920x1080 24fps and letter box 2:35:1

The HUD Inspector in Full Screen View seems to position at the right margin of the image as a default(?) If I toggle the button in the top right of the HUD it 'unlocks' and I can drag it to where I prefer -- at the left margin; (for over a decade) my doc

The HUD Inspector in Full Screen View seems to position at the right margin of the image as a default(?) If I toggle the button in the top right of the HUD it 'unlocks' and I can drag it to where I prefer -- at the left margin; (for over a decade) my dock has resided at the right margin so all my slider manipulation over countless editing sessions in Aperture has been ingrained to work at the left margin -- but, the vast majority of the time, the HUD overlaps the image I am editing in this 'unlocked' mode.
Every occasionally I enter Full Screen View and it positions on the left margin *without* superimposition...(!) My great joy is modulated into aggravation, however, should my tracking cursor drift all the way 'out of bounds' -- to call in the hidden pane of adjacent images sequenced in the library... This dramatically shrinks the Full Screen display and re-locks the HUD; if I toggle the switch to re-xpand the image it re-positions at the right margin!!!! I SOOoooooo wish I knew how to control the default 'locked' margin of the HUD in Full Screen View...

Drag it over to the Left. Then lock it there.

Can not watch movies in full screen view?

Can not watch movies in full screen view movie stops

Welcome to the Adobe Forums.
To better assist you with this issue we need to know:
What is your operating system? (Windows or Mac) (XP, Vista, 7, 8)
What browser do you use? (Internet Explorer, Firefox, Chrome, Opera, Safari)

This is about iPhoto: I need to print the FULL IMAGE as shown on the screen: the image is SQUARE (equal on four sides). iPhoto keeps cropping it into a rectangle - THIS IS NOT ACCEPTABLE! How do I get what I see on the screen in print form???

I need to print the FULL image as shown on the screen - the image is SQUARE (equal on all four sides). iPhoto keeps cropping it into a rectangle - this is not acceptable! How do I get what I see on the screen into print form?

Like Terence explained:
OT

The Full Screen icon does not appear in Firefox 16.0.2 on Mac OS 10.6.8, and command+shift+F does not close the full screen view.

I accidentally entered full screen view and was unable to exit. The Firefox Help article at https://support.mozilla.org/en-US/kb/how-make-firefox-and-websites-go-full-screen?esab=a&s=full+screen+mac&r=0&as=s says I should see a Full Screen View icon in the upper right-hand corner of the Firefox window. That icon not there. I cannot find it. It does not appear in either the full screen or non-full screen views.
Further, the Help article's advice to exit full screen view by using the keyboard sequence command+shift+F does not work. I had to unplug my iMac and reboot. Firefox then opened in non-full screen view.
Ideally, hitting the Escape key would cause Firefox to exit full screen view.

I forgot one detail. This happened while I was having trouble seeing the mouse cursor (I use Apple's Magic Mouse). It had disappeared briefly. I had to drag the cursor out of the Firefox Window for it to reappear. I accidentally entered full screen view while the cursor was not visible.

I accidently click for a full screen view on Firefox and now I can't undo it. My bar with tools, bookmarks, etc. is not visible. As the browser opens, the bar appears but then jumps up where it can't be reached. How do I turn off the full screen?

I accidently clicked for a full screen view on Firefox and now I can't undo it. My bar with tools, bookmarks, etc. is not visible. As the browser opens, the bar appears but then jumps up where it can't be reached. How do I turn off the full screen without access to view options?

Co-el, This wasn't possible as there wasn't a navigation bar available. The F11 did the trick though. Thanks for adding to the discussion.

Full screen view not full image...

Similar Messages

Maybe you are looking for