Full Server Backup for Domain Computer
Having Windows 2012 Domain Controllers. I have a requirement to provide a backup for one domain controller to be sent to a another data center, so that if all our main datacenters are destroyed for any reason, we can have a media with backup of our AD.
So i took a Full Server Backup for one of our domain controllers, put it on a tape, send it to the security team so that they can send it to the standby datacenter.
Security team asking me that on the standby datacenter, they want to simulate complete disaster ( that is all domain controllers are destroyed) and they want to give me a machine so that i can restore the full server backup of AD on it.
Is this supported ? To save the Full Server backup of a domain controller in a Tape so that it can be restored in standby datacenter in different computer when things get bad?
ammarhasayen
As Tero already mentioned, one you have your test environment up and running, you need to prepare your DRP (Disaster Recovery Plan).
See that:
http://technet.microsoft.com/en-us/library/cc757662(v=ws.10).aspx
http://technet.microsoft.com/en-us/library/bb727048.aspx
Make sure that you are taking periodic system state backups of at least one DC/GC server.
For the standby datacenter, you can simply promote a new DC/DNS/GC server there and keep it active to be used in case of disasters as I previously mentioned. By configuring properly your AD sites and subnets, you can be sure that your Windows servers and
client computers do not use this DC for daily authentication.
This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Get Active Directory User Last Logon
Create an Active Directory test domain similar to the production one
Management of test accounts in an Active Directory production domain - Part I
Management of test accounts in an Active Directory production domain - Part II
Management of test accounts in an Active Directory production domain - Part III
Reset Active Directory user password
Similar Messages
-
hi there,
i want to perform a full server backup for my RHEL ver 4 over which oracle 9i is installed. Total file systems are 6 and size of oracle database over these partitions is nearly 250 GB. size of total server partitions is nearly 350G. We have a HP DLT tape drive with a storage capacity of 400 G. I want to perform a full server backup on this DLT. I'm using tar ie. "tar -cvf <dlt> / ". but problem is that after writing some partitions ie. after writing 3 partitions tar exits itself without giving any error.
This is somewhat like cold backup.... database goes down n full server backup performed n database opens. but in my case database is properly going down but tar is writing only three partitons and after that without giving any error next statement executes and database starts.
Please guide.
will be very thankful
amritthanks,
alright so i cant take ful server backup then.
now problem is that i want cold backup for my database. and for that i've created a script which generates a spool file using various v$ views ie. datafile,ctrlfile n redo.
then this script is executed from crontab.
now in this script first statement says like "tar -cvf <dlt> /filepath1"
then second statement goes with argument " -rvf " which rewinds complete tape and then starts writing. there are 26 datafiles in my database and some of them are nearly 20G.
now whenever this datafiles are written using -rvf ..... it takes too much time ie. i scheduled it at 23:00 and next day till 09:00 database was not up..... it was still writing to dlt. then i haver to interrupt this backup and start my database.
we are not using any third party tool. plseas guide me what stretigy should i follow to have my cold backup done.
although this same technique of writing is working with one of my server which is using solaris9. in RHEL 4 there's problem.
please guide.
thanks in advance
amrit -
Bare metal restore of full server backup fails with RPC error 0x800706BA (server 2012)
With Windows Server 2012, after creating a successful windows server backup (full server), I am unable to do a bare metal restore of the system.
EFI System Partition, C:, D: are the volumes on a single array (Raid 5).
Loading WinRE and launching re-image, the full server restore stops after completing the C: restore just after beginning the D: drive restore (data volume) with the error with the message about RPC error 0x800706BA, unavailable.
The system will not boot as a result of the failure.
What may be causing this?
[edit]
I think I have two things working against me here... one, Volume Shadow Copy service wasn't running in WinPE and two.. the D: volume contains data deduplication.
I think this is causing some of my problems.
Is there an additional service that I need to start in WinPE to get a volume that was deduplicated restored perhaps using wbadmin?Hi,
Thanks for the reply Shaon.
The hardware system is identical; however, I am increasing storage capacity from 12TB to 16TB. Basically, the system is the same, just new hard drives (4x4TB versus 4x3TB). Drives are all identical enterprise class drives and I am actually using
the same system (backup, swap drives then restore).
I tried both using the WinRE restore (re-image) with the backup set, and tried using wbadmin. Both produce same RPC unavailable messages (although using the GUI based tool via WinRE provides the additional error code #).
I do not have any idea what to look at to try to figure this one out.
[edit]
I was just informed of this posting:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/147efccc-e0e9-4458-852e-c3a44ae5cb64/the-system-image-restore-failed-error-details-he-rpc-server-is-unavailable-0x800706ba?forum=windowsbackup
and in my case, this lab server does in fact act also as a DC as well as a file server... do I need to spin up a secondary controller (perhaps in a VM on another machine) to do this restore? -
Time Machine backup for old computer has been named for new computer
On my new Time Capsule, I backed up the entire disk from my older computer. While consulting with a live help technician for an unrelated problem, he had me reset the Time Capsule using the newer computer. To resume use of the Time Machine backup from my older computer, I had to gain permission . . . and subsequently discovered the reason why. Reseting with the new computer caused the backup volume to be renamed with the new computer's name.
Sooo, 1) how do I correct the naming error, and 2) will further confusion occur when I then go to back up the new computer?It may or may not ask you to reformat the disk when you set it up as the backup for that new computer. If it does, I think you can cancel it.
What I would do is open Migration Assistant, then import your applications/documents/etc. onto the new computer, and then use the Time Machine disk for backup (formatting it if it asks you to).
You'll at least have recent files and stuff like that, which may not be as good as an incremental history but at least it's something. -
Windows Server Backup for VM with Exchange
We have Server 2012 standard and its running Hyper- V. The VM that is running is Server 2008 R2 Standard which is also our Exchange 2010 Server.
I know you can use Server backup 2012 to easily backup Hyper-V machine. But will it be so easy if that VM is running Exchange on it? I am going to back it up to an external drive.
This article shows how to backup a HV machine but I can't really find anything on a HV machine with exchange.
http://virtualizationreview.com/blogs/virtual-insider/2013/02/back-up-hyper-v-vms.aspxHi,
You could refer to the thread below to know the difference of the two methods:
Hyper V 2012 Backup - best practice
http://social.technet.microsoft.com/Forums/windowsserver/en-US/3c6385c0-d1db-40ee-a371-8346f6067973/hyper-v-2012-backup-best-practice
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Which Server Version for Domain Controller do I Need
Hello
We are currently running two domain controllers with Server 2003 on them. We have a standard TCP/IP star topology networking including web servers, files servers, sql, iis etc.
We are upgrading 5 of our servers to 2012r2 and are using them as "host" servers for upgraded IIS (2012r2) and WebGrabber (2008r2) servers and these servers will be set up as virtual machines (the IIS and web grabbers) on the hosts.
My question is will using Windows Server 2003 domain controllers cause issues in the advanced settings in 2012r2 and Hyper-V? Should we upgrade our Domain Controllers and if so to what version? 2008r2 or 2012r2?
Thanks!
Theresa Greene
Theresa GreeneMy question is will using Windows Server 2003 domain controllers cause issues in the advanced settings in 2012r2 and Hyper-V? Should we upgrade our Domain Controllers and if so to what version? 2008r2 or 2012r2?
At least Windows Server 2012
I highly recommend to upgrade the Domain Controllers to at least Windows Server 2012.
Besides the new functionality described by others in this thread, Windows Server 2012-based Domain Controllers (and beyond) offer virtualization safeguards, building on the VM-GenerationID offered by your new virtualization platform. This functionality helps
to protect your Domain Controllers from USN rollbacks and Lingering Objects. It also unlocks the Domain Controller Cloning functionality, that may help you deploy your five Domain Controllers faster and more streamlined.
More information:
New features in AD DS in Windows Server 2012, Part 12: Virtualization-safe
Active Directory
New features in AD DS in Windows Server 2012, Part 13: Domain Controller
Cloning
Cases where VM-GenerationID doesn’t help make Active Directory virtualization-safe, Part
1
Cases where VM-GenerationID doesn’t help make Active Directory virtualization-safe, Part
2
Getting to Windows Server 2012
In terms of getting your Active Directory to Windows Server 2012, there's good news and slightly bad news. The bad news is you can't in-place upgrade your Domain Controllers to Windows Server 2012. The good news: This makes the transition scenario
more appealing.
Instead of upgrading your Domain Controllers on their physical hardware, and, then, convert them to virtual machines, you can build new virtual Windows Server 2012 Domain Controllers, while your Windows Server 2003 Domain Controllers remain running.
Then, when you're ready to get rid of your Windows Server 2003 Domain Controllers, you simply demote them and remove them from your network. I've written a detailed step-by-step on this:
Transitioning your Windows Server
2003 Domain Controllers to Windows Server 2012 -
Scripting for Windows Server Backup for Exchange 2010
Hi,
I'm new to writing scripts and was wondering if anyone could assist with writing a script to backup an Exchange Server in a windows 2008 r2 environment. I currently use Windows Server Backup with a full VSS backup to run exchange backups, however,
each backup overwrites the previous one, and i would really like to have multiple backups. I would also like to specify backup log locations, and have emails sent upon successful backups or failed backups. I am trying to write this powershell
but cant seem to get things to work.
Thanks
DebbianYou can use PowerShell in conjunction with the Windows Backup command line utility, wbadmin.exe. The code below should help get you started. I have included the date in order to help maintain multiple back ups, but if you do more than one back up per day,
you will need to change the date format to include the time. You cannot control the built in logging of Windows Backup, but you could collect your own backup information and write that out to a text file. As far as sending emails, look into the Send-MailMessage
cmdlet including the -Attachment parameter that could send your log file with your mail message. Cheers.
$Date = Get-Date -Format 'MM-dd-yyyy'
$Path = "\\server\share\$Date"
New-Item -Path $Path -ItemType Directory | Out-Null
Start-Process wbadmin.exe -ArgumentList "start backup -backupTarget:$Path -allCritical -vssFull -quiet" -
How do I remove a backup for a computer I no longer have
I am running low with space on my Time Capsule. I had four devices backing up to the Time Capsule but one of the four is not in my possession anymore. How do I delete the backup for that device to free up space?
Thank you!
I used the Finder in Mountain Lion. Unable to connect an ethernet at this time so I went through the WiFi; it did take a some time. As soon as I had enough space the Time Capsule/Time machine went into action.
I see you are from Melbourne Australia--daughter will be studying this Fall (your Spring) in Sydney. If she runs into any Apple problems while there....
Thanks again! -
Security for domain computer only accessible for administrative users
Dear users,
I was wondering if there is any GPO so I can secure some computers from being used by other users.
This is how the situation is currently:
There 600 computers and all are member of a domain.
Now I want 4 computers that only can be used by Administrators so no one else can logon on these computers.
But I can't seem to find that option, or its not working.
Does anyone here knows a good KB or any other related article I can read to arrange this?
Kind regards,
MartijnHi,
Would you please tell more information regarding the 4 computers here? Are they domain controllers?
With domain controllers, the default settings is that only members of the Account Operators, Administrators, Backup Operators, Print Operators, and Server Operators groups have the
Allowed logon locally system right.
For workstations and servers, members who have the logon rights are Administrators, Backup Operators, Power Users, Users, and Guest. If we want to change the default settings about logon locally with workstations and servers, we may consider to modify this
policy.
More information regarding allow logon locally, please see:
Allow log on locally
http://technet.microsoft.com/en-us/library/cc756809(v=WS.10).aspx
Hope this may help
Best regards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Sharepoint full farm backup generates sql logs for search application differential backups
We are running full farm backups for sharepoint. Backup completes normally but SQL logs are generated for differential backups for search service application.
it says something like:
Database differential changes were backed up: database: search_serv.......
Thanks,
BasitThis can happen for a few reasons, such as is disk contention or network issues. Are you backing up to a shared directory on the SQL Server? If not, try that.
Trevor Seward
Follow or contact me at...
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Incomplete Recovery Fails using Full hot backup & Archive logs !!
Hello DBA's !!
I am doing on Recovery scenario where I have taken One full hot backup of my Portal Database (EPR) and Restored it on New Test Server. Also I restored Archive logs from last full hot backup for next 6 days. Also I restored the latest Control file (binary) to their original locations. Now, I started the recovery scenario as follows....
1) Installed Oracle 10.2.0.2 compatible with restored version of oracle.
2) Configured tnsnames.ora, listener.ora, sqlnet.ora with hostname of Test server.
3) Restored all Hot backup files from Tape to Test Server.
4) Restored all archive logs from tape to Test server.
5) Restored Latest Binary Control file from Tape to Test Server.
6) Now, Started recovery using following command from SQL prompt.
SQL> recover database until cancel using backup controlfile;
7) Open database after Recovery Completion using RESETLOGS option.
Now in Above scenario I completed steps upto 5) successfully. But when I execute the step 6) the recovery completes with Warning : Recovery completed but OPEN RESETLOGS may throw error " system file needs more recovery to be consistent " . Please find the following snapshot ....
ORA-00279: change 7001816252 generated at 01/13/2008 12:53:05 needed for thread
1
ORA-00289: suggestion : /oracle/EPR/oraarch/1_9624_601570270.dbf
ORA-00280: change 7001816252 for thread 1 is in sequence #9624
ORA-00278: log file '/oracle/EPR/oraarch/1_9623_601570270.dbf' no longer needed
for this recovery
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
ORA-00308: cannot open archived log '/oracle/EPR/oraarch/1_9624_601570270.dbf'
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 3
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/oracle/EPR/sapdata1/system_1/system.data1'
SQL> SQL> SQL> SQL> SQL> SQL> SQL>
SQL> alter database open resetlogs;
alter database open resetlogs
ERROR at line 1:
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/oracle/EPR/sapdata1/system_1/system.data1'
Let me know What should be the reason behind recovery failure !
Note : I tried to Open the database using Last Full Hot Backup only & not applying any archives. Then Database Opens successfully. It means my Database Installation & Configuration is OK !
Please Let me know why my Incomplete Recovery using Archive logs Goes Fail ?
Atul Patil.oh you made up a new thread so here again:
there is nothing wrong.
You restored your backup, archives etc.
you started your recovery and oracle applyed all archives but the archive
'/oracle/EPR/oraarch/1_9624_601570270.dbf'
does not exist because it represents your current online redo log file and that is not present.
the recovery process cancels by itself.
the solution is:
restart your recovery process with:
recover database until cancel using backup controlfile
and when oracle suggests you '/oracle/EPR/oraarch/1_9624_601570270.dbf'
type cancel!
now you should be able to open your database with open resetlogs. -
Full OS backup and restoration
I have a Win 2012 R2 server installed on a Dell PE730 box. The box is highly critical and there are lot of configurations in that server that I want to create a full backup and incase of failure of the box, the backup should be useful to restore the box
with all configurations.
I don't use any third party tools for backup - use Windows backup role in Win 2012, also plans to use the Windows feature itself to restore also.
What is the best method of creating a backup and restore plan. Pls suggestHi,
You can use a full server backup to perform all types of recoveries, including system state and bare metal recoveries. We recommend this option. Then you could recover your server operating system or full server by using Windows Recovery Environment.
For more detailed information, you could refer to the articles below:
Backing Up Your Server
https://technet.microsoft.com/en-us/library/cc753528.aspx
Recover the Operating System or Full Server
https://technet.microsoft.com/en-us/library/cc755163.aspx
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Cannot set up or modify backup for client computers.
I am running Windows Server 2012 R2 Essentials and was able to set up back ups for all of my machines when I initially set up the network. All backups were running fine.
I have added a disk drive to one of my machines and correctly started receiving messages that the drive should be added to the backup. When I try to customize the backup for the machine I get an error pop up with the message ""The
task "Customize Backup for the computer" did not complete successfully"". I tried all of my other machines and get the same message.
I also needed to reconnect a machine to the server and in doing so had to disconnect it from the server, losing the backups stored and now I get the message ""The task "Set up Backup for the computer" did not complete successfully""
and cannot backup this computer.
I have checked all of the logs and cannot find any definitive errors occurring at the times I have tried to modify or set up backups. Can anyone help?
Since originally asking this question, the Server 2012 R2 Update applied and now I no longer have Client's, User's or Storage listed on the tabs in the dashboard so I do not know if backups are being done or not. I tried to run the connector on the clients
but get a forbidden error when I try to connect to the link. does anyone have any suggestions on how to correct these errors?Hi,
Before going further, would you please let me know if the client computers are dynamic disks? Please understand that Windows Server 2012 Essentials does not support backing up and restoring
dynamic disks on client computers. In addition, if the client backup folder is on the storage pool? At this time, please also run the Windows Server 2012 Essentials BPA to have a general health check on the server, for details, there is a link for your reference:
Run the Windows Server 2012 Essentials Best Practices Analyzer
http://technet.microsoft.com/en-us/library/jj713500.aspx
Hope this helps.
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support -
ICloud full OS backup and TimeMachine
I normally backup with an external WD HD for Mac. Twice now have I bought two disks that went corrupt and I couldn't restore my backups.
Is there an iCloud or any other Cloud solution that provides a FULL OS backup (including Applications -- since sites lick Backblaze don't offer Application and App settings backups)? If so can any of them be integrated with TimeMachine?Hi,
You can use a full server backup to perform all types of recoveries, including system state and bare metal recoveries. We recommend this option. Then you could recover your server operating system or full server by using Windows Recovery Environment.
For more detailed information, you could refer to the articles below:
Backing Up Your Server
https://technet.microsoft.com/en-us/library/cc753528.aspx
Recover the Operating System or Full Server
https://technet.microsoft.com/en-us/library/cc755163.aspx
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Unable to Connect to the Server and WLI Domain problem
Hi All
this is the details
I have installed installed WIntegration Server and using
quickstart click the Take to Platform tour I started all the servers
Note-- I have not installed separate weblogic server 7.0 and not started.
whenever I click started WebLogic Integration Studio and it shows
user --admin
password- security
url--t3://localhost:7001
once submit it shows always Unable to connect to the server
please help me ???????????????????????????????????????????/
Server is running fine I used quickstart--- Take the live platform tour to run
the below servers.
C:\bea\weblogic700\samples\platform\e2eDomain>"C:\bea\jdk131_08\bin\java" -hotsp
ot -Xms256m -Xmx256m -XX:MaxPermSize=256m -Xverify:none -Dcommerce.properties="
C:\bea\weblogic700\portal\weblogiccommerce.properties" -Dweblogic.jws.Production
Mode="false" -Dweblogic.servlet.ClasspathServlet.disableStrictCheck="true" -De2e
Sample.b2b.path.data=".\beaApps\e2eApp\data" -Dweblogic.Name=e2eServer -Dbea.hom
e="C:\bea" -Dweblogic.management.username= -Dweblogic.management.password= -Dweb
logic.ProductionModeEnabled=true -Dweblogic.management.discover=false -Djava.sec
urity.policy=="C:\bea\weblogic700\server\lib\weblogic.policy" weblogic.Server
Starting WebLogic Server...
<Aug 5, 2003 1:22:23 PM EDT> <Notice> <Management> <140005> <Loading configurati
on C:\bea\weblogic700\samples\platform\e2eDomain\.\config.xml>
<Aug 5, 2003 1:22:37 PM EDT> <Notice> <Security> <090093> <No configuration data
was found on server e2eServer for realm CompatibilityRealm.>
<Aug 5, 2003 1:22:37 PM EDT> <Notice> <Security> <090082> <Security initializing
using realm CompatibilityRealm.>
<Aug 5, 2003 1:22:38 PM EDT> <Notice> <WebLogicServer> <000327> <Starting WebLog
ic Admin Server "e2eServer" for domain "e2eDomain">
<Aug 5, 2003 1:24:23 PM EDT> <Notice> <B2BIntegration> <000000> <INFO: WebLogic
Integration - B2Bi Server started successfully.>
INFO: WebLogic Integration - B2Bi Server started successfully.
<Aug 5, 2003 1:24:31 PM EDT> <Notice> <AI> <000000> <Started WebLogic Integratio
n - AI Server version 7.0.4.0>
<Aug 5, 2003 1:24:35 PM EDT> <Notice> <BPM> <000000> <Started WebLogic Integrati
on - BPM Server version 7.0.4.0>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
After the server has booted, your browser should
automatically launch and point to the WebLogic Server
Index running on this server. If your browser
fails to launch, point your browser to the URL
"http://Inforicadb:7501/index.jsp
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
=============== Initializing Logger ======================
<Aug 5, 2003 1:24:36 PM EDT> <Notice> <Management> <141053> <Application Poller
not started for production server.>
<Aug 5, 2003 1:24:46 PM EDT> <Notice> <WebLogicServer> <000354> <Thread "SSLList
enThread.Default" listening on port 7502>
<Aug 5, 2003 1:24:46 PM EDT> <Notice> <WebLogicServer> <000354> <Thread "ListenT
hread.Default" listening on port 7501>
<Aug 5, 2003 1:24:47 PM EDT> <Notice> <WebLogicServer> <000329> <Started WebLogi
c Admin Server "e2eServer" for domain "e2eDomain" running in Production Mode>
<Aug 5, 2003 1:24:48 PM EDT> <Notice> <WebLogicServer> <000365> <Server state
ch
anged to RUNNING>
<Aug 5, 2003 1:24:48 PM EDT> <Notice> <WebLogicServer> <000360> <Server started
in RUNNING mode>
please help me, urgent
Thanks in advance
Domain problem---------------------------------------------
I created WLI domain like this is it correct ?
Next I used Quick start's --Configure New Server
then single server option radio selected
then
single server name--myserver
server listner address---????????? please tell me
server listening port 7001
ssl listnening port 7002
username bala
password subramaniam
verify password subramaniam
c:\bea\user_projects\CIBC
configure database mail--
email address- [email protected]
email host: what need to give ??????? please tell me----
after I created domain called CBC it is in the
c:\bea\user_projects\CBC
then I saw it consists
1)wlai folder
2)dbinfo
3)application
4)keys
5)scripts
setdatabase.cmd
startweblogic.cmd
startmanagedweblogic.cmd
setwlidomaindata.cmd
wliconfig.cmd
checkdomain.cmd
Wliconfig.jar
startweblogic.cmd
stopweblogic.cmd
I try to startweblogic.cmd it open and closed no action
please tell me what is the problem????????????
with regards
balaOh boy! Let me see what's going on. Are you using the VZW Cloud or the BUA app? Please try downloading the VZW Cloud app if you dont already have it. And once downloaded. Tap the 3 bars in the upper corner and go down to "TOOLS", then tap "RESTORE CONTENT". That should do it!
VanetrisC_VZW
Follow us on Twitter @VZWSupport
Maybe you are looking for
-
Satellite M110 - question on Screen resolution 1600 x 900
Hi experts, hoping you can help me out. Just bought an external screen which needs 1600 x 900 screen resolution,.... trouble is my display settings don't have that option. If I "Hide modes that this monitor cannot display" I can only choose 800x600 o
-
Hyperlinks in scrollable content slide out
Hi, I would like to build a scrollable content slide out with hyperlinks that navigate to different pages in an article, to be used as an in article navigation. However, I'm having problems to get the hyperlinks to work. Any Ideas? Kind regards Tim I
-
Some free Dreamweaver Templates for download
I've been designing sites using Dreamweaver for years and finally decided to take a stab at creating some templates. I have two available for download so far and plan on putting more online in the coming weeks. They can be found at http://www.pixel
-
I wasn't able to download the CS6 Master trial version.
What can I do next?
-
My 24" 2008 iMac, running 10.5.8 and iPhoto '08 (300 GB harddrive, 67 GB avail, 2.8 GHz Intel Core 2 Duo, 2 GB 800 MH sdram), only imports my digital photo images directly from the camera at about 1/2 or less of the original file size. I thought it