"full service" with no service (AT&T)

I have a 3gs and ever since the one of the file updates(I don't remember which one but it started the one before the mms update) I have been experiancing an annoying problem. Sometimes my phone will say it will have full 3g service when in reality it doesn't. I can not make/recieve a call, text or browse the Internet. Some times turining off 3g makes it work but it only fixes the problem rarley. So most of the time Turing on/off 3g doesn't do anything except makes the antenna signal say no serivce. This is despite other people with a 3gs having full 3g serivce. Rebooting it usually does nothing except saying no serivce. If I boot it without 3g it sometimes connects to edvo but usually if I turn on 3g after that it goes back to no service and I need to repeat the process.
sometimes the signal appears but without an edvo connection or 3g which also means no calls/texts or Internet.
Now this problem does not occur every day. Let's say it happens a hand full of times every month. Usually by my gfs house but it usually corrects it'self before I get annoyed enough to go to apple. Anyone have any ideas of what I should do?
Also has anyone else heard of this problem?

It's not a cell tower issue because it's happened to me in multiple areas in northern already. I ddi a reset of the network settings and it worked for about a minute on 3g but then it wouldn't connect. I tried resettig it a few more times but it still didn't work. So then I turned off 3g and I connected to edvo. Tried a few times to connect to 3g but still got no service.
I just got on the parkway and now I have 3g again (I got service right where I lost service earlier in the night)
I'm beginig to think my radio is alittle week and that my phone has problems when tranfering towers

Similar Messages

Cannot register Analytic Services with Shared Services

Hello,
I have installed the following products of System 9.3:
- License server and Shared services (everything went OK, I can connect to User Management Console using admin/password );
- Analytic Services;
Using Configuration Utlity I activated Analytic Services.
But when I try to Register Analytic Services with Shared Services I get the following error "Incorrect username and password".
I don't know why I get this error because I can connect to User Management Console with admin/password.
The log of the config utiliy shows the following:
(Sep 15, 2007 6:19:56 PM), Install.product.install, com.hyperion.cis.config.Configurator, dbg, Hyperion Home: C:\Hyperion
(Sep 15, 2007 6:19:56 PM), Install.product.install, com.hyperion.cis.config.Configurator, msg1, Loading product descriptor from file C:\Hyperion\common\config\product\biplus\9.3.0.2\biplus_1.xml...
(Sep 15, 2007 6:19:56 PM), Install.product.install, com.hyperion.cis.config.Configurator, msg1, Loaded product "biplus", version 9.3.0.2, build 350.
(Sep 15, 2007 6:19:56 PM), Install.product.install, com.hyperion.cis.config.Configurator, msg1, Loading product descriptor from file C:\Hyperion\common\config\product\essbase\9.3.0.0.0\essbase_1.xml...
(Sep 15, 2007 6:19:56 PM), Install.product.install, com.hyperion.cis.config.Configurator, msg1, Loaded product "Essbase", version 9.3.0.0.0, build 100.
(Sep 15, 2007 6:19:56 PM), Install.product.install, com.hyperion.cis.config.Configurator, msg1, Loading product descriptor from file C:\Hyperion\common\config\product\hub\9.3.0.0.0\hub_1.xml...
(Sep 15, 2007 6:19:56 PM), Install.product.install, com.hyperion.cis.config.Configurator, msg1, Loaded product "Hub", version 9.3.0.0.0, build 42.
(Sep 15, 2007 6:19:56 PM), Install.product.install, com.hyperion.cis.config.Configurator, msg1, in loadClasses
(Sep 15, 2007 6:19:57 PM), Install.product.install, com.installshield.wizardx.conditions.PlatformWizardBeanCondition, dbg.platform, target platform: name="Windows XP" version="5.1" arch="x86"
(Sep 15, 2007 6:19:57 PM), Install.product.install, com.installshield.wizardx.conditions.PlatformWizardBeanCondition, dbg.platform, condition platform: name="Linux" version="." arch="."
(Sep 15, 2007 6:20:00 PM), Install.product.install, com.hyperion.cis.config.wizard.ProductTaskSelectionPanel, dbg, queryEnter method is entered
(Sep 15, 2007 6:20:00 PM), Install.product.install, com.hyperion.cis.config.wizard.ProductTaskSelectionPanel, dbg, Checking OS type/version/architecture against system requirements...
(Sep 15, 2007 6:20:00 PM), Install.product.install, com.hyperion.cis.config.wizard.ProductTaskSelectionPanel, dbg, os.name:Windows XP
(Sep 15, 2007 6:20:00 PM), Install.product.install, com.hyperion.cis.config.wizard.ProductTaskSelectionPanel, dbg, os.version:5.1
(Sep 15, 2007 6:20:00 PM), Install.product.install, com.hyperion.cis.config.wizard.ProductTaskSelectionPanel, dbg, os.arch:x86
(Sep 15, 2007 6:20:00 PM), Install.product.install, com.hyperion.cis.config.wizard.ProductTaskSelectionPanel, dbg, major os version #:5; minor os version #: 1
(Sep 15, 2007 6:20:00 PM), Install.product.install, com.hyperion.essbase.config.EssbaseAgentTaskProcessor, dbg, Initialized EssbaseAgentTaskProcessor
(Sep 15, 2007 6:20:00 PM), Install.product.install, com.hyperion.hub.MailServerTaskProcessor, dbg, Initialized MailServerTaskProcessor
(Sep 15, 2007 6:20:00 PM), Install.product.install, com.hyperion.essbase.config.EssbaseAgentTaskProcessor, dbg, Entered EssbaseAgentTaskProcessor.getDisplayName()
(Sep 15, 2007 6:20:00 PM), Install.product.install, com.hyperion.essbase.config.EssbaseAgentTaskProcessor, dbg, Display name returned : Register Analytic Services Server as Windows Service
(Sep 15, 2007 6:20:00 PM), Install.product.install, com.hyperion.hub.MailServerTaskProcessor, dbg, Entered MailServerTaskProcessor.getDisplayName()
(Sep 15, 2007 6:20:00 PM), Install.product.install, com.hyperion.hub.MailServerTaskProcessor, dbg, Display name returned : Configure Mail Server
(Sep 15, 2007 6:20:38 PM), Install.product.install, com.hyperion.cis.config.wizard.ProductTaskSelectionPanel, dbg, ctask: RegisterEssbaseAsMultipleAgent
(Sep 15, 2007 6:20:38 PM), Install.product.install, com.hyperion.cis.config.wizard.ProductTaskSelectionPanel, dbg, ctask: hubRegistration
(Sep 15, 2007 6:20:38 PM), Install.product.install, com.hyperion.cis.config.wizard.PanelEventDispatcher, dbg, constructor
(Sep 15, 2007 6:20:38 PM), Install.product.install, com.hyperion.cis.config.wizard.ProductCustomInputPanel, msg1, Task hsfCustomHubConfig not selected, skipping panel hsfCustomHubConfig
(Sep 15, 2007 6:20:38 PM), Install.product.install, com.hyperion.cis.config.wizard.ProductCustomInputPanel, msg1, Task relationalStorageConfiguration not selected, skipping panel hpsu8XSelectionManager
(Sep 15, 2007 6:20:38 PM), Install.product.install, com.hyperion.cis.config.wizard.ProductCustomInputPanel, msg1, Task applicationServerDeployment not selected, skipping panel avalancheAnalyzerDBSetupStub
(Sep 15, 2007 6:20:38 PM), Install.product.install, com.hyperion.cis.config.wizard.ProductCustomInputPanel, msg1, Product hmb not selected, skipping panel hmbServerHostPorts
(Sep 15, 2007 6:20:38 PM), Install.product.install, com.hyperion.cis.config.wizard.ProductCustomInputPanel, msg1, Product hmb not selected, skipping panel hmbWorkspaceInfo
(Sep 15, 2007 6:20:38 PM), Install.product.install, com.hyperion.cis.config.wizard.ProductCustomInputPanel, dbg, managerClassName: com.hyperion.essbase.config.EssbaseAgentUserPanelManager
(Sep 15, 2007 6:20:57 PM), Install.product.install, com.hyperion.cis.config.wizard.ProductCustomInputPanel, dbg, managerClassName: com.hyperion.essbase.config.EssbaseAgentPortPanelManager
(Sep 15, 2007 6:21:10 PM), Install.product.install, com.hyperion.cis.config.CmsRegistrationUtil, dbg, Getting CSS instance
(Sep 15, 2007 6:21:10 PM), Install.product.install, com.hyperion.cis.config.CmsRegistrationUtil, dbg, URL for CSS.xml = https://localhost:58080/interop/framework/getCSSConfigFile
(Sep 15, 2007 6:22:11 PM), Install.product.install, com.hyperion.cis.config.CmsRegistrationUtil, err, com.hyperion.css.common.configuration.CSSConfigurationException: Cannot configure the system. Please check the configuration.     Error Code: 9
NestedException:
java.io.IOException: Property data cannot be loaded from the cache.
(Sep 15, 2007 6:22:11 PM), Install.product.install, com.hyperion.cis.config.CmsRegistrationUtil, err, Failed to initialize CSS API
(Sep 15, 2007 6:22:11 PM), Install.product.install, com.hyperion.cis.config.CmsRegistrationUtil, err, Failed to authenticate user = admin
(Sep 15, 2007 6:22:28 PM), Install.product.install, com.hyperion.cis.config.wizard.ProductCustomInputPanel, dbg, managerClassName: com.hyperion.essbase.config.EssbaseAgentPortPanelManager
(Sep 15, 2007 6:22:29 PM), Install.product.install, com.hyperion.cis.config.wizard.ProductCustomInputPanel, dbg, managerClassName: com.hyperion.essbase.config.EssbaseAgentUserPanelManager
(Sep 15, 2007 6:22:29 PM), Install.product.install, com.hyperion.cis.config.wizard.ProductTaskSelectionPanel, dbg, queryEnter method is entered
(Sep 15, 2007 6:22:29 PM), Install.product.install, com.hyperion.cis.config.wizard.ProductTaskSelectionPanel, dbg, Checking OS type/version/architecture against system requirements...
(Sep 15, 2007 6:22:29 PM), Install.product.install, com.hyperion.cis.config.wizard.ProductTaskSelectionPanel, dbg, os.name:Windows XP
(Sep 15, 2007 6:22:29 PM), Install.product.install, com.hyperion.cis.config.wizard.ProductTaskSelectionPanel, dbg, os.version:5.1
(Sep 15, 2007 6:22:29 PM), Install.product.install, com.hyperion.cis.config.wizard.ProductTaskSelectionPanel, dbg, os.arch:x86
(Sep 15, 2007 6:22:29 PM), Install.product.install, com.hyperion.cis.config.wizard.ProductTaskSelectionPanel, dbg, major os version #:5; minor os version #: 1
(Sep 15, 2007 6:22:40 PM), Install.product.install, com.hyperion.cis.config.wizard.ProductTaskSelectionPanel, dbg, ctask: hubRegistration
(Sep 15, 2007 6:22:40 PM), Install.product.install, com.hyperion.cis.config.wizard.PanelEventDispatcher, dbg, constructor
(Sep 15, 2007 6:22:40 PM), Install.product.install, com.hyperion.cis.config.wizard.ProductCustomInputPanel, msg1, Task hsfCustomHubConfig not selected, skipping panel hsfCustomHubConfig
(Sep 15, 2007 6:22:40 PM), Install.product.install, com.hyperion.cis.config.wizard.ProductCustomInputPanel, msg1, Task relationalStorageConfiguration not selected, skipping panel hpsu8XSelectionManager
(Sep 15, 2007 6:22:40 PM), Install.product.install, com.hyperion.cis.config.wizard.ProductCustomInputPanel, msg1, Task applicationServerDeployment not selected, skipping panel avalancheAnalyzerDBSetupStub
(Sep 15, 2007 6:22:40 PM), Install.product.install, com.hyperion.cis.config.wizard.ProductCustomInputPanel, msg1, Product hmb not selected, skipping panel hmbServerHostPorts
(Sep 15, 2007 6:22:40 PM), Install.product.install, com.hyperion.cis.config.wizard.ProductCustomInputPanel, msg1, Product hmb not selected, skipping panel hmbWorkspaceInfo
(Sep 15, 2007 6:22:40 PM), Install.product.install, com.hyperion.cis.config.wizard.ProductCustomInputPanel, msg1, Task RegisterEssbaseAsMultipleAgent not selected, skipping panel essbase1
(Sep 15, 2007 6:22:40 PM), Install.product.install, com.hyperion.cis.config.wizard.ProductCustomInputPanel, msg1, Task RegisterEssbaseAsMultipleAgent not selected, skipping panel essbase2
(Sep 15, 2007 6:22:51 PM), Install.product.install, com.hyperion.cis.config.CmsRegistrationUtil, dbg, Getting CSS instance
(Sep 15, 2007 6:22:51 PM), Install.product.install, com.hyperion.cis.config.CmsRegistrationUtil, dbg, URL for CSS.xml = https://localhost:58080/interop/framework/getCSSConfigFile
(Sep 15, 2007 6:23:52 PM), Install.product.install, com.hyperion.cis.config.CmsRegistrationUtil, err, com.hyperion.css.common.configuration.CSSConfigurationException: Cannot configure the system. Please check the configuration.     Error Code: 9
NestedException:
java.io.IOException: Property data cannot be loaded from the cache.
(Sep 15, 2007 6:23:52 PM), Install.product.install, com.hyperion.cis.config.CmsRegistrationUtil, err, Failed to initialize CSS API
(Sep 15, 2007 6:23:52 PM), Install.product.install, com.hyperion.cis.config.CmsRegistrationUtil, err, Failed to authenticate user = admin
I see this error: Failed to inizialize CSS API and Failed to authenticate user = admin
What does this mean?
Any help will be appreciated!
Thank you
Daniela

Hi Tom,
I created the user demo/demo with admin privileges in Shared Services. I can connect to User Management Console, but when trying to register Analytic Services with Shared Services I still get "Incorrect username or password".
I see in the configtool log the following lines:
(Sep 16, 2007 1:34:13 PM), Install.product.install, com.hyperion.cis.config.CmsRegistrationUtil, dbg, Getting CSS instance
(Sep 16, 2007 1:34:13 PM), Install.product.install, com.hyperion.cis.config.CmsRegistrationUtil, dbg, URL for CSS.xml = https://localhost:58080/interop/framework/getCSSConfigFile
(Sep 16, 2007 1:35:14 PM), Install.product.install, com.hyperion.cis.config.CmsRegistrationUtil, err, com.hyperion.css.common.configuration.CSSConfigurationException: Cannot configure the system. Please check the configuration.     Error Code: 9
NestedException:
java.io.IOException: Property data cannot be loaded from the cache.
(Sep 16, 2007 1:35:14 PM), Install.product.install, com.hyperion.cis.config.CmsRegistrationUtil, err, Failed to initialize CSS API
(Sep 16, 2007 1:35:14 PM), Install.product.install, com.hyperion.cis.config.CmsRegistrationUtil, err, Failed to authenticate user = demo
It seems it can't inizialize this CSS API. Why? What do I have to do?
thanks
daniela

Registration of Analytic Services with Shared Services

Hello All,
We are installing the Hyperion system 9.2 suite with Planning & Essbase.
Following advised processes, we installed analytic services & tried to register the product with shared services, using the configuration utility. Even though the operation is declared as "succeded", we are unable to provision any user to Analytic services in Shared services, which is a proof that the registration failed.
Is there any particular action to be done to get this operation succeeded?
Thanks for your help.
Mike.

Re: Unable to Externalize users to Shared Services

Hi i just ended my service with my service provider and was wondering if i have to do anything to use my iphone 3gs with another carrier. do i need to get it unblocked to be able to use another sim card

I just ended service with my at&t and was wondering if i have to do anything like have my phone unblocked to use another sim card or use another provider

I have a 3GS, out of contract with AT&T. I emailed for the unlock, and got an email saying:
"Request number: (xxxxxx)
Thank you for contacting AT&T Customer Care about unlocking your iPhone.
We have reviewed your request and confirmed that you are eligible to have the requested iPhone unlocked.
Please allow 24 hours upon receipt of this notification to complete the unlock.
To complete the unlock, simply:
Open iTunes on your Mac or PC and verify that you have Internet connectivity.
Ensure a SIM card is inserted into your iPhone.
Connect your iPhone using the dock connector to USB cable that came with your iPhone.
Backup and restore your iPhone using iTunes. For information on backup and restore, please visit http://support.apple.com/kb/HT1414.
After restoring, your iPhone will be unlocked.
Additional information on unlocking can be found at http://support.apple.com/kb/TS3198
For questions regarding AT&T's wireless service and iPhone, please visit the Phone/Device Learning Center.
We thank you for your continued business.
You may also check the status of your unlock request by clicking the link for AT&T's Device Unlock Status Portal.
Sincerely,
AT&T Customer Care Team"
Now the deal here is, iOS 6 is out now, so in order to complete the instructions and restore it with iTunes, you have to update to iOS 6. I decided to keep 5.1.1, so I did NOT restore the phone. I checked a couple IMEI checker sites, and they all said my IMEI was unlocked, so rather than use iTunes, I just replaced the AT&T SIM with an O2-UK SIM card I had when using my Android phone in England. I was pleased to see T-Mobile show up as my carrier when I turned the iPhone on, and in Settings, it shows O2 as the carrier instead of AT&T, due to the O2 SIM being installed. Then a moment later, I got texts saying what my remaining British £ balance is, since I had leftover money on the SIM from my last trip, and another text said "Welcome to America, have a nice trip!"
The phone isn't jailbroken or anything like that. It's still on 5.1.1 with the proper, working Google mapping. Never restored via iTunes. Never updated to iOS 6. Any SIM card works. No tricks or hacks. You don't have to restore the phone to complete the unlock.

How to build an OData Service with Gateway Service Builder (NO DDIC, BOR import)

Hi Community,
I hope to get an answer here to finish my project. I´m a newbie to the sap gateway service builder. Please provide me a helping hand.
I have a problem I´m sure someone out there can help me.
I need to create an sap ui app, which is monitoring our database behaviour (->transaction st06) is there someone who knows how to build a OData Channel with sap gateway service builder without importing a BOR- Object, or a DDIC?
Or how to build an OData channel which exposes the database (monitoring) data from ST06?
I would really appreciate if someone could help me.
THANKS!
JOE

Hello Joe,
If u do not want to import any Structure or BOR- Object, u can follow below steps :
1. Create ur data model by adding the properties manually in SAP GW service builder with correct Edm types.Doing this would be pain in my opinion ( sometimes we are forced to do this but no other option doing this way )
Create associations & navigation needed.
2. U can generate run-time objects.
3. Go to appropriate classes and implement methods with ur Business Logic.
4. Register ur service & consume.
U can also import RFC to create data model and create mapping as per required by implementing correct method as well.
once u do this generate objects and register service and consume it.
Check this out for ur info :
Detailed step by step procedure for Creating Gateway Service with all the CRUD Operations and testing them in Service Explorer Part1
Regards,
Ashwin

Connect to remote PHP service with Data/Services panel

Please add this functionality.

Hi,
I think the whole point is that you shouldn't need to have drive mapping to create your services, you should be able to connect to the db and get your vo's and services generated.
I don't believe that development should be done on a remote server, but you should be able to at least do introspection and even setup the localhost database without work arounds like vpn.
David.

Service Procurement with Multiple Service Line items

Dear Experts,
We have the following Business Scenario. Request your inputs in addressing this issue.
Business scenario : Most of the Procurement for our client is of services. So, we need to configure services with multiple service line items. This Shopping cart to create PR in ECC. PR to PO conversion to take place in ECC. Now onwards client needs Supplier integration for confirmation of services and sending invoices by Vendor.
Guidance required in the following
1 In Shop functionality if we select services, PR is being created in ECC with only one Service Line item. Whereas if we go for Request functionality, then always it is routing to Bidding process (which is not required for client). Can we create SC with multiple service line items with out request functionality?? Or Can we root the Request functionality with out Bidding process??
2 If we convert the PR to PO in ECC (Classic Scenario), can we go for SUS integration. In such case which is the best way of supplier integration. Can you please guide us on basic steps on installation (can we go for different client in the same server) and configuration.
Request your inputs in this regard
Thank you,
Ravi

Hello,
We suffered the same problem in our company. We have found a way to work with the SRM shopping cart multiple line rollup to ECC single line purchase order.
If the multiple shopping cart line items contain the same location code and cost assignment they will rollup into one ECC purchase order. The system seems to 'think' it is helping you by consolidating your information.
In the Basic Data section of the shopping cart there is a Service line item field. If you enter something in each in that field for each line it will keep it's own line in ECC.
Your implementation may differ slightly from ours but I recommend playing with the location code, cost assignment and Basic Data service line fields until you can see a pattern. Basically you need to find a method to make each line a separate entity so they don't rollup.
Good luck,
Corinne

SMF service with DS6

After enabling a DS6 instance as a SMF service (with "dsadm service-enable --type SMF"), I see two services that have been added:
# svcs -a | grep ds
disabled 10:48:25 svc:/application/sun/ds:default
online 11:01:36 svc:/application/sun/ds:ds--local-ds
I'm curious: what is the purpose of the 'ds:default' service? It seems to always stay disabled, regardless of the state of the instance-specific service ('ds:ds--local-ds').
Thank you,
-- George

The default service serves as a "template" for common parameters to all real services. You may have several instances of Directory Server on the same machine, they all have the same start command and stop command (with a parameter which is in the instance specific service.
There is nothing that runs for the default service.
Regards,
Ludovic.

Salesforce and Crystal Reports XI Release 2 Full build with Service Pack 2

Hi
I need to install 'Crystal Reports XI Release 2 Full build with Service Pack 2' (CR XI R2 SP2) on a new computer but can't find the exe/zip file used previously to do that.
The reason I need that particular version is because (as I understand it) its the version needed to interface with our Salesforce application.
I have the CRXI original disks and keycode but as I understand it no manner of patching with SPs will get me to CR XI R2 SP2.
I've tried various searches and frustratingly come up with only dead links (old BO forums and SAP forums).
Is there a live link somewhere that I can use, or will a later version do the job?
For example, alternatively, will I be able to use the CR XI R2 SP4 file instead?
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm
Thanks for your help.

Post Author: ejthunder
CA Forum: Deployment
Hello,
Crystal Reports XI and XI R2 are not supported on 64 bit machines. I have not heard of any plans to change this. As you've discovered - the only version of Crystal Reports that is supported on a 64 bit machine is CR.NET 2005 (v10.2), the version that ships with VS2005.
Your options are to downgrade your application to use bundled CR.NET 2005 or to deploy your CR XI R2 .NET application to a 32 bit machine.
EJ

Express 2014 with Advanced Services, can't create Full Text Index, no service running

I can't confirm that Full-text service is running or installed. There is no sql server full text search [instance] running as a service on the machine. I thought this would be installed with advanced services? I installed all options when installing express
edition 2014. But it's not there. When I run
select fulltextserviceproperty('isfulltextinstalled')
I get a '0' which according to other posts means that it is not installed. I installed Sql Server Advanced Services 2014 with all tools checked. And in Sql Server Configuration Manager I see the service 'Sql Full Text Filter Daemon Launcher' and it is running.
Is there another service called 'sql server full text search' that should be in serives. How do I install full text
search for Sql Server Express 2014 With Advanced Services or install the service so that I can run full text search? Please help !
When running this command
CREATE FULLTEXT CATALOG GftExGiftFTCat;
I get the message:
Cannot use full-text search in user instance.
chuckdawit

Hi chuckdawit,
Could you please verify that if you connect to the correct SQL Server instance?
Based on my test, the error “Cannot use full-text search in user instance” could occur when connecting to the LocalDB as LocalDB does not support the Full-Text feature. To use the Full –Text feature in SQL Server Express, please ensure that you connect
to the instance with connection string “ ServerName\SQLEXPRESS”.
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support

Anyone know how to contact anyone in Verizon headquarters? Since I'm not getting anywhere with Customer Service

I'd like to express how unsatisfied we have been with Verizon on an issue that has been ongoing now since March 14, 2014. It involves an upgrade on one of our lines. After all these months, phone call with customer service, Tech support, and visits to a Verizon stores, I would hope that there are ample notation on our acct but since I've had to explain the situation on a bi-weekly time frame, I would assume that no one has documented any contacts.
We've been with Verizon for few yrs now and I have always been very satisfied with Verizon who, up until now , always provided excellent customer service in their knowledge, concern, and customer satisfaction. But I have to say, every positive outlook I've had with your company has been wiped clean with the worst service we have received in the last few months.
We upgraded my daughter's phone on 03-14-14 with a Samsung Galaxy Mini from an Iphone 4s. Within 24 hrs, the phone failed. After 2 visits to a Verizon store the next day which took 6 hrs, we still had to return the next day to speak to a manager. The 2 stores advised us to make a CLAIM on the defective phone thru our insurance plan with Verizon. A CLAIM on a 24 hr old phone!! A 3rd visit with a manager finally convinced him to replace the phone with another new phone at the store. Within 2 weeks - issues began to occur with the replacement phone. Several visits more, several calls more with Customer Service, several calls more with tech support which adds up to soooo many of our time taken up to simple have temporary "fixes" is outrageous. If I billed Verizon for my time, perhaps the situation would have been resolved more quickly. Each visit lasts approx 2 hrs, each phone call approx 1-1 1/2 hrs. We are talking at least 2x a month for the course of 5 1/2 months. Plus the time it takes to get the phone back to where she needs it - contacts, apps, internet.
Not once were we offered a new phone or replace the phone. Not until today. Replace the phone with the same phone that my daughter has grown to hate. So basically a 3rd phone - same phone. She is not interested in this phone any longer. She dealt with this phone model for far too long.
Today we were offered to replace the phone with same phone, or pay for a refurbished Iphone 4. So basically she would be going back to her original Iphone 4s before the upgraded WITH a cost. So her upgrade was wasted, we'd paid over $200 for a defective phone, and would need to pay for an even older model Iphone 4 and have to pay for it. Why wasn't she offered a different phone within those 30 days after the upgrade and 6 visits?
Every rep at the stores, every rep in tech support would provide a different reason for the issue. Finally, tech support advised not to download apps. WHAT GOOD IS A SMARTPHONE IF YOU CAN'T HAVE APPS??? We are talking about a 20 yrs college student who attends school in another state. Do you know the trouble she has to go thru to visit a store? To find 2 hrs between being a full time student with 2 jobs to sit on the phone with a tech support or go to a Verizon store? Once-ok Twice-maybe BUT for 5 months?
She's not eligible for an upgrade. She will be stuck with a phone that she had grown to hate. And I with customer service which I've grown to hate.
Finally, The Edge. Trying to find a way to make my daughter happy, I spoke with 4 representative today about the Edge. Each rep gave me 4 different information. 1st rep advised Edge phone could not be used on another line so I could not use a line eligible for the Edge and give that phone to my daughter since she isn't eligible for the Edge. 2nd rep advised that although new phone thru edge must be used by same number that it was eligible for, we could use the current phone o that line for my daughter. My son currently has an Iphone 5 and is eligible for the Edge early upgrade. He would not have to return his Iphone 5 so my daughter could use it. However, all the lines would have to go to the More Everything Plan and share the Data between all our phone lines. 3rd rep advised the cost would almost double from our current $358 to go to the More Everything Plan so suggested to have 2 accounts vs just 1. 4th rep advised not every line needs to go the More Everything Plan, we could not keep the current phone, and my daughter could get a replacement phone but same phone or made exception to offer the Edge early upgrade to my daughter but only after we go thru the replacement program because the phone we send to Verizon has to be in good working order/no defects.
After 5 1/2 months, it is now Verizon that is indicating that we have a defective phone and can't accept it thru the Edge program or we would get billed approx $299 for a defective phone. After 5 1/2 months of me calling in about a defective phone that not one rep replaced because they "fixed" the problem ( by the way, a temporary fix is not fixing, if it was fixed I would have made those calls today or writing this email), I am now being told her phone is defective. She advised to get a replacement phone first, return the old phone, activate the new phone, then call in to get the Edge early upgrade. So my daughter would have to do all this, plus add contacts back, apps and whatever else she needs to use her phone just to turn around a couple weeks later and do it all over again with the new phone thru the Edge program. Once again, we are the ones having to be inconvenienced and go thru all these steps. Did I mention she is going to be studying abroad in Italy beginning Nov? So the idea of having to wait 2-3 weeks for a new phone and having only a week or 2 to test the phone to make sure it's working properly before she's out of the country doesn't sound appealing to me. Verizon has made us have a defective phone for 5 months advising it's in good working order after each and every "fix" but Verizon will not accept that phone if returned in the same condition as a phone in good working condition. Do you see the irony in that?
I have reached my limit and after 5 yrs of my brother in law trying to convince us to switch to AT&T where he works in their Corporate Office, I can honestly say I will not be sad to leave Verizon. Especially when one of your reps simply provided me with the contract end dates to provide to AT&T because they offered to buy out our contract. No effort in customer retention what so ever. That was a phone call on Thursday.
And yes, one of your tech reps tried to convince me of all the hassle it would be to switch and time AT&T would take to buy out our contracts but honestly it was the pot calling the kettle. I am not in the position to discuss hassle and time after 5 months of getting that with Verizon. Did I mention it's my brother in law so we would be getting special treatment and no out of pocket expenses to switch. It was my loyalty and satisfaction with Verizon that has kept me from switching all these years. Something Verizon clearly does not appreciate.
So can you guess where I am with confidence that your customer service department is knowledgable about the plans/offers? Where I am that I can trust what I'm being told?
I know this email is confusing and really hard to understand...perhaps now you will know how i've been feeling--lost and confused with all the mis-information, with a hit and miss phone, and out of time with all the 1 1/2 hr to 2 hrs EACH wasted on this issue.
On top of all this, I can't even find out how to file a complaint with anyone higher up than Customer Service.

Jneklason wrote:
~snip~
I know this email is confusing and really hard to understand...perhaps now you will know how i've been feeling--lost and confused with all the mis-information, with a hit and miss phone, and out of time with all the 1 1/2 hr to 2 hrs EACH wasted on this issue.
On top of all this, I can't even find out how to file a complaint with anyone higher up than Customer Service.
I hate to tell you this, but you didn't write an email. You wrote a discussion post on the Verizon Wireless Community forum which is a public peer to peer forum. Unfortunately since you didn't mark your post as a question, the VZW reps that roam this community won't ever see your post. Before you re-post it, don't. Duplicate posts get removed from the community.
I see there were several missteps both by the reps and yourself in your post. First you should have insisted on returning the phone within the 14 day return policy period. Second which Samsung Galaxy mini model did you purchase? The S3 mini or the S4 mini? Did you do any research prior to deciding on this device. The reps at that time deflected the easiest course of action, by trying to get you to replace the phone under insurance instead of returning the phone. The Early Edge payment option requires the current phone on the line using the early Edge must be returned to Verizon Wireless. Did you once considered going to a third party site like Swappa to purchase a gently used device for your daughter?

Connect to Secure web service with certificate from SAP EP

Hi Experts,
Here is the current situation:
1. Our business requirement is to connect 3rd party RESTful web service which requires secure connection with private client certificate attached
2. I've tested in my Java test application and successfully attached private certificate to HttpsURLConection request to the web service and made a connection. No problem at all.
KeyStore keyStore = KeyStore.getInstance("PKCS12");
InputStream inputStream = new FileInputStream("privateKeyCert.p12");
keyStore.load(inputStream, "myPassword".toCharArray());
KeyManagerFactory keyManagerFactory = KeyManagerFactory.getInstance(KeyManagerFactory.getDefaultAlgorithm());
keyManagerFactory.init(keyStore, "myPassword".toCharArray());
KeyManager[] kms = keyManagerFactory.getKeyManagers();
SSLContext sslContext = SSLContext.getInstance("SSL");
sslContext.init(kms, null, new SecureRandom());
SSLSocketFactory sockFact = sslContext.getSocketFactory();
URL url = new URL("https://www.thirdpartywebservice.com/testroot/");
HttpsURLConnection conn = (HttpsURLConnection) url.openConnection();
conn.setSSLSocketFactory(sockFact);
conn.setRequestMethod("POST");
conn.setDoOutput(true);
conn.setDoInput(true);
conn.setUseCaches(false);
conn.setDefaultUseCaches (false);
conn.setRequestProperty("Content-Type", "text/xml");
3. Next, I tried to apply my Java application to SAP EP NetWeaver, and found that I have to use SecureConnectionFactory:
https://help.sap.com/saphelp_nw70ehp1/helpdata/en/e2/71c83edf72e16be10000000a114084/content.htm
4. So, I modified my Java code for SAP EP:
KeyStore keyStore = KeyStore.getInstance("PKCS12");
InputStream inputStream = this.getClass().getClassLoader().getResourceAsStream("privateKeyCert.p12");
keyStore.load(inputStream, "myPassword".toCharArray());
SecureConnectionFactory scFactory = new SecureConnectionFactory(keyStore);
HttpURLConnection conn = scFactory.createURLConnection("https://www.thirdpartywebservice.com/testroot/");
conn.setRequestMethod("POST");
conn.setDoOutput(true);
conn.setDoInput(true);
conn.setUseCaches(false);
conn.setDefaultUseCaches (false);
conn.setRequestProperty("Content-Type", "text/xml");
And I'm facing the following error message:
Exception: java.security.UnrecoverableKeyException: ja
va.security.GeneralSecurityException: Unable to decrypt private key: javax.crypto.BadPaddingException: Invalid PKCS#5 padding length: 253
Could you please help me what this error message means?
Do you think do I need to to do some other configuration to make connection to web service with client certificate?
This is our first approach. Please help...
Thank you in advance.

SunJSSE implement SSL server CertificateRequest in a strict mode, if client failed to find a proper certificate corresponding the server request, it does not guess what's the proper certificate and send to the server. In your case, because there is no intermediate certificate in the client context, so there is no way to make the decision which certificate would be acceptable by server, so client does not send any cert to server. That's why you got a handshaking error.
I guess your client key store does not contains a full certificate path from the client end-entity certificate to the root CA. Please import the full certificate path into the key store.
BTW, these approaches should work, but I found no reason why one does not adopt #1:
1. import the full certification path of client certificate into client key store.
2. as a workaround, configure the server to send a list including the intermediate certificates;
3. as a workaround, you will have to customize the client KeyManager if you don't want to or are not able to configure the server to send a list including the intermediate certificates.

Integrating Microsoft Reporting Service with SAP running on SQL Server 2K5

Hi All,
I am new to SAP R3 and I need the help for Integrating Microsoft Business Intelligence Report Services with SAP R3 4.6 C running on SQL Server 2005? Also how Biztalk Adapter is use full for this process?
Thanks in Advance

Hello Madhav,
you might want to post this to the "SAP on Windows" forum as well.
Regards,
Marc
SAP Techology RIG

Web services with servicegen i Weblogic 7

I am trying to create web services with Weblogic's tool servicegen and
ANT. It works great until I have a web service method that return a PK
class of an EJB. I get the error "Error: bean property and public
field found with the same name: id" (full stacktrace below). After
some investigating I found out that it was my PK class that was the
bad guy. But my PK class MUST have the field "id" public, otherwise
ejbc complains...
Am I doing anything wrong or does anyone have a solution?
/Weasel
webservices:
[servicegen] Generating service "HelloWorldEJB" ...
[servicegen] Generating XML types and serializers from ejb-jar
(E:\java\projects\CMP20CMR-xdoclet\build\ejb\weblogic-ejb\samples-ejb.jar)
[servicegen] weblogic.xml.schema.binding.BindingException: Error: bean
property and public field found with the same name: id
[servicegen]      at weblogic.ant.taskdefs.webservices.autotype.AutoTypeTask.execute(AutoTypeTask.java:356)
[servicegen]      at weblogic.ant.taskdefs.webservices.servicegen.ServiceGenTask.generateService(ServiceGenTask.java:248)
[servicegen]      at weblogic.ant.taskdefs.webservices.servicegen.ServiceGenTask.execute(ServiceGenTask.java:141)
[servicegen]      at org.apache.tools.ant.Task.perform(Task.java)
[servicegen]      at org.apache.tools.ant.Target.execute(Target.java)
[servicegen]      at org.apache.tools.ant.Target.performTasks(Target.java)
[servicegen]      at org.apache.tools.ant.Project.executeTarget(Project.java)
[servicegen]      at org.apache.tools.ant.Project.executeTargets(Project.java)
[servicegen]      at org.apache.tools.ant.Main.runBuild(Main.java)
[servicegen]      at org.apache.tools.ant.Main.start(Main.java)
[servicegen]      at org.apache.tools.ant.Main.main(Main.java)
[servicegen] --- Nested Exception ---
[servicegen] weblogic.xml.schema.binding.BindingException: Error: bean
property and public field found with the same name: id
[servicegen]      at weblogic.ant.taskdefs.webservices.autotype.ComponentAutoTyper.mapComponent(ComponentAutoTyper.java:157)
[servicegen]      at weblogic.ant.taskdefs.webservices.autotype.EJBAutoTyper.run(EJBAutoTyper.java:100)
[servicegen]      at weblogic.ant.taskdefs.webservices.autotype.AutoTypeTask.execute(AutoTypeTask.java:350)
[servicegen]      at weblogic.ant.taskdefs.webservices.servicegen.ServiceGenTask.generateService(ServiceGenTask.java:248)
[servicegen]      at weblogic.ant.taskdefs.webservices.servicegen.ServiceGenTask.execute(ServiceGenTask.java:141)
[servicegen]      at org.apache.tools.ant.Task.perform(Task.java)
[servicegen]      at org.apache.tools.ant.Target.execute(Target.java)
[servicegen]      at org.apache.tools.ant.Target.performTasks(Target.java)
[servicegen]      at org.apache.tools.ant.Project.executeTarget(Project.java)
[servicegen]      at org.apache.tools.ant.Project.executeTargets(Project.java)
[servicegen]      at org.apache.tools.ant.Main.runBuild(Main.java)
[servicegen]      at org.apache.tools.ant.Main.start(Main.java)
[servicegen]      at org.apache.tools.ant.Main.main(Main.java)
[servicegen] --- Nested Exception ---
[servicegen] weblogic.xml.schema.binding.BindingException: Error: bean
property and public field found with the same name: id
[servicegen]      at weblogic.xml.schema.binding.internal.codegen.JavaInspector.checkForFieldConflict(JavaInspector.java:384)
[servicegen]      at weblogic.xml.schema.binding.internal.codegen.JavaInspector.addPropertiesToScalar(JavaInspector.java:345)
[servicegen]      at weblogic.xml.schema.binding.internal.codegen.JavaInspector.fillDescriptor(JavaInspector.java:152)
[servicegen]      at weblogic.xml.schema.binding.internal.codegen.JavaInspector.getDescriptor(JavaInspector.java:115)
[servicegen]      at weblogic.xml.schema.binding.internal.codegen.JavaInspector.createDescriptorForClass(JavaInspector.java:90)
[servicegen]      at weblogic.xml.schema.binding.internal.codegen.Compiler.compile(Compiler.java:121)
[servicegen]      at weblogic.xml.schema.binding.internal.XSDTypeMappingBuilder.mapClass(XSDTypeMappingBuilder.java:88)
[servicegen]      at weblogic.xml.schema.binding.internal.XSDTypeMappingBuilder.mapClass(XSDTypeMappingBuilder.java:101)
[servicegen]      at weblogic.xml.schema.binding.internal.TypeMappingBuilderBase.addMapping(TypeMappingBuilderBase.java:176)
[servicegen]      at weblogic.ant.taskdefs.webservices.autotype.ComponentAutoTyper.addMapping(ComponentAutoTyper.java:85)
[servicegen]      at weblogic.ant.taskdefs.webservices.autotype.ComponentAutoTyper.mapComponent(ComponentAutoTyper.java:113)
[servicegen]      at weblogic.ant.taskdefs.webservices.autotype.EJBAutoTyper.run(EJBAutoTyper.java:100)
[servicegen]      at weblogic.ant.taskdefs.webservices.autotype.AutoTypeTask.execute(AutoTypeTask.java:350)
[servicegen]      at weblogic.ant.taskdefs.webservices.servicegen.ServiceGenTask.generateService(ServiceGenTask.java:248)
[servicegen]      at weblogic.ant.taskdefs.webservices.servicegen.ServiceGenTask.execute(ServiceGenTask.java:141)
[servicegen]      at org.apache.tools.ant.Task.perform(Task.java)
[servicegen]      at org.apache.tools.ant.Target.execute(Target.java)
[servicegen]      at org.apache.tools.ant.Target.performTasks(Target.java)
[servicegen]      at org.apache.tools.ant.Project.executeTarget(Project.java)
[servicegen]      at org.apache.tools.ant.Project.executeTargets(Project.java)
[servicegen]      at org.apache.tools.ant.Main.runBuild(Main.java)
[servicegen]      at org.apache.tools.ant.Main.start(Main.java)
[servicegen]      at org.apache.tools.ant.Main.main(Main.java)
BUILD FAILED
E:\java\projects\CMP20CMR-xdoclet\script\build.xml:498:
weblogic.xml.schema.binding.BindingException: Error: bean property and
public field found with the same name: id

Web services can only be published to BEA if you install Apache SOAP on BEA and use the Apache SOAP option of JDeveloper. The J2EE Web Services implementation framework is specific to Oracle9iAS.
The PL/SQL Web Services server implementation is based on the J2EE Web Services option and as a result is not really portable to BEA.
To publish a PL/SQL Web service on BEA with JDeveloper you would have to write the Java wrapper code to invoke the stored procedure using standard JDBC and then publish that Java class as a Web service using Apache SOAP. Then if you had Apache SOAP installed on BEA you would be set.
Portability of Web services implementations is a big feature coming with JAX-RPC - currently what most vendors have is interoperability between implementations because of things like SOAPBuilders and WS-I. When JAX-RPC becomes part of J2EE 1.4 roughly in June and vendors start putting out implementations on it you should get closer to portability.
In the meantime, the easiest way to get portability is to use the same SOAP server on both servers - Apache SOAP is a good example.
Hope this helps.
Mike

Recent update 3.01 to 3.1.2 - Full Coverage to No service, back to full

I'm not sure why I did it, but I usually go by the rule of thumb if a device you are operating has no problems, there should be no need to update it. Well, I did not follow that rule, and recently updated to 3.1.2.
The problem I'm experiencing is the coverage will have all 5 bars, and drop to none, then I get no service, and about 5-7 seconds later it will jump back to full coverage, with 5 bars. This is sporadic, but occurs several times a day.
I've googled the issue, and have tried different "Supposed" resolutions, such as: Resetting network, and disabling 3G. I have not completely reset the device, as that is the last thing I would like to do.
Is this a major issue with others or just me. The crazy thing is, I've had virtually no dropped calls...only this issue!!

I just bought a new fone yesterday and did a software upgrade. Network indicator shows full, but not able to make calls or send smses.. called up de service provider (Etisalat) here.. attempted a few network resets and soft resets.. but all in vain.. works for sometime and den again back to non-working condition.. tried changing the SIM.. no advantage..
planning of a downgrade to de old version.. at least i cud use it as a fone..

"full service" with no service (AT&T)

Similar Messages

Maybe you are looking for