Full stock removal functionality for 201 movement type

Dear Friends
I am facing one problem with full stock removal. As per my requirement, system should remove full container to staging area there
the requried qtty will remove and the remainging qtty goes to another storage type. When I post 201 movement type, system is not picking the full container.
When I observe movement type it is using dynamic bin and I changed it to static bin and I created a bin in 911 and I did the positng it picking the full container.
My question is, I chaanged in movement type and is there any impact for the same.
Regards
Raghu

Hi
The only impact I can think of is with the 'dynamic bin'setting the bin is the cost centre and with your change ALL of your Goods issues to cost centre will be in the same bin and so clearing these quantities out will not be so easy as when you create the TO to 'pick' the stock to clear it out it will not be able to pick the specific bin for the cost centre, However as all of tyhe stock is in the same 'bin' it should not be too much of an issue as it will jsut reduce the bin by the qty on the TO.
It just means that if you want to report on the stock in 911 then it will all be inthe same bin and you cannot differentiate as to which material was put there by which cost centre
Frenchy

Similar Messages

  • Goods issueto any cost centre for 201 mov.type  using Transaction MB1A

    Hi all ,
      our user wants to activate Batch management indicator in material master , but there is stock in current and previous periods , so I suggested as GI the stock to any cost centre  for 201 mov.type in previous  and current periods , then mark the "Batch management indicator " in materail master and later cancel the GI  for 202 mov.type in those periods.
    But , now the stock in previous period is 3500 qty and Current period  is 3000 Qty . If the user try to issue the GI in previous period , system displays error message as "deficit of SL Unrestricted-use 500 qty"
    Please advise how to acheive this.
    Regards,
    Amara.

    start with a 202 and post 500 to your current stock.
    then do 201 to issue3500 in previous period
    then you set the batch management flag
    and do a 202 for for 3500 in previous period
    followed by a 201 to remove 500 in current period

  • Cancellation for 201 movement type

    Hi,
    We cosumed material for cost center with 201 movement type on 25.12.2009. Now we must send back to our vendor. But there is no stock in storage location. aA far as I know in this case there are two choıces:
    One of them is making cancelletion for material document. But the document date and posting date are not possible periods. Can we do cancellation for current date? Is it wrong for CO? Or what is the effect for CO?
    Second of them is making goods receips for 711 movement type.
    Which of them are more sutible for CO / this case? or what we can do? Are there another solutions in this case?
    Thanks.

    hi
    >One of them is making cancelletion for material document. But the document date and posting date are not possible periods. >can we do cancellation for current date? Is it wrong for CO? Or what is the effect for CO?
    in this case u can have two options
    open the previous period with MMPI and do the cancellation (search on net for MMPI),but in this case u have to discuss with ur CO and FI guys for the impact of reversal in past period
    also if the closings havebeen carried out there will be the balance of this stock
    another option is that use movement type 202 directly u will get back stock in current period

  • Make field selection for 201 Movement type for MB21 t.code

    Hello,
    I have making reservation through T.code..
    In that screen we have entered Movement type 201 in MB21 t.code  ,,it will show me two fileds
    G/L Account filed and Cost center..
    In that Cost center field is mandatory.....User told me to do the G/L account filed mandatory... how to do this....
    In filed selection there is only one fieled is the cost center....then there is no filed for G/L Account.
    Regards
    sapman man

    Hello,,
    For G/L account mandatory  ..in 201 Movement type.
    Go to  Spro-Inv ManagementGoods issuse/Transfer PostingSet manual account assignment---and Give + sign Infront of movment type 201.
    It will make the field G/L Account in MB21 201 movement type
    Regards
    Mahesh Naik.

  • CIN - Reverse part 2 entry for 201 movement type ?

    Hi
    When we withdraw raw materials for internal use from stock using movement type 201 , should we post a part 2 entry in the RG23A registar? If yes please let me know the process.
    Thanks
    Ganapathy

    Dear
    IF we are internally issuing the raw material to cost center .
    there is no need of reversing the part 2 .
    Regards
    Naveen

  • Full Stock Removal & Full Stock Placement

    Assume, in the source storage bin "B1" we have stock of 100 qtys. (Storage type "S1") and the destination storage bin is "B2" (Storage type "S2").
    Suppose, a process order has been created for 75 qtys. and corresponding to that a TR generated for 75 qtys..
    So, material has to be transfered from source bin BIN "B1" (Storage type "S1") to destination bin "B2" (Storage type "S2").
    So, when we create a TO for this TR &  confirm the TO, system picks only 75 qtys. from the source bin "B1" (storage type "S1") & transfers 75 qtys. to the destination storage bin "B2" as per the TR qtys.. (instead full 100 qtys. is to be transfered)
    Now, the clients requirement is that, complete 100 qtys. is to be transfered from the source bin "B1" (Storage type "S1") to destination bin "B2" (Storage bin "S2").
    In the configuarion settings for Storage type 'S1', "Full stock removal is activated"  and "Retun stock to same bin is active"  (SU Mngt. is active. ). As the SU Mngt. is active, we are not able to un-check the indicator "RETURN STOCK TO SAME BIN".
    But even though the above setting is active, while stock removal & placement, the system is considering only 75 qtys.and transering the 75 qtys. from "B1" to "B2", instead at the time of stock removal system should consider the full 100 qtys. &  full stock 100 qtys. is to be transfered to the destination bin "B2".
    Also, if i check the indicator "OVERDELIVERIES" for movement type 319, we are able to transfer the full 100 qtys. to destination bin "B2", but we have a situattion not to check this indicator for movement type as this will effect for all the warehouse numbers as well as all the storage types.
    So, Please help me, how can we achieve the "FULL STOCK REMOVAL & FULL STOCK PLACEMENT" .....
    What STATERGIES to be selected & any other configuration is invovled in this....please let me know.
    Thanks & Regards,
    Pavan CN
    Edited by: cn_pavan on Jul 25, 2009 7:19 PM

    Hi,
    Please check this thread:
    Re: Issue on complete stock removal
    remark:
    we have a situattion not to check this indicator for movement type as this will effect for all the warehouse numbers as well as all the storage types.
    As I remember (I'm not before SAP, so maybe I'm mistaken) you can define movement type WH-specific.
    Regards,
    Csaba
    Edited by: Csaba Szommer on Jul 26, 2009 7:59 AM

  • Batch Creation or Batch Determination for 531 movement type

    Dear Experts,
    I have some confusion with Movement type 531 -
    1) Can we do Batch determination for 531 movement type.
    2)  Can we do the automatic Batch creation at the production order level or confirmation level. In this case i have done the settings but in confirmation screen i have to create batch manually through Menu Path.
    3) I have to enter characteristics value manually in confirmation screen as i have select classify batches in foreground. But in material master we have Batch Class type so can values comes from there to batch of confirmation screen.
    Thanks & Regards,
    Saurabh Kumar

    Hello
    Please read carefully notes 191368 and 194619. These are very old correction notes and they are already implemented on your system, however, they provide the following information about the system design:
    For a by-product or co-product, no batch determination is executed anymore. The subsequent stock determination is not executed anymore either.
    and
    No batch determination for by-products may be executed during the confirmation.
    It means that the batch determination for movemen 531 is not a functionality of the standard system.
    I have never tested this scenario, however, as far as I know, the batch can be created automatically for the by-product if you are using internal number range on OMCZ.
    BR
    Caetano

  • How to set error message for 541 Movement type

    Dear gurus,
                I want to know that is it possible to set error message through any configuration? My requirement is that when we create issue document using m.t 541 it will not allow me to process that document without releasing PO document.so for that i want to set error message.
    <removed by moderator>
    Message was edited by: Jürgen L

    Hi,
       The subcontracting goods issue can be done even without PO reference. If your organization is strictly following the goods issue against PO only and you want to restrict the goods issue if the PO is not released, then you may check the below option. Please note that the below option is available in standard only from EHP 4 or above.
    1. Refer the KBA: 1915825 - Transfer Posting reference to a Purchase Order in MIGO and activate the PO reference option in MIGO - Transfer posting.
    2. Restrict the use of 541 movement in MB1B - Go to OMJJ and enter movement type as 541. Now go to "allowed transactions" folder and remove MB1B. Now the user cant use 541 in MB1B.
    3. Maintain the field - Purchase order as mandatory field for the movement type 541 in OMJJ.
    4. Train the users to use MIGO - Transfer Posting - Purchase order option for goods issue with 541 movement.
    5. If the PO is not released, system wont allow to use the PO in MIGO - Transfer Postings.
    6. If the user is selecting Transfer Posting - Other, system wont check the PO and hence it will allow to post the goods issue even if PO is not released. You may take organizational measures to restrict the usage or you may check for authorization concept - Refer the note: 773003 - MIGO: No authorization object for action/reference document
       If you are below EHP 4, there is no standard functionality available for the requirement as of my knowledge. If so, you may go for development to restrict the same.
    Regards,
    AKPT

  • Report MB5B for selected movement types

    Dear All,
    When I am executing report for selected movement types , system givivng me message below " Movment type is reset"
    After continuing that Movement type field turns BLANK, and report is executed with considering all movement types.
    If there is a way for executing MB5B report for selected movement types, please suggest.
    Thanx..

    Hai,
    1.The MB5B report will show the stock on posting date with all movements like Goods recipt from Purchase, production order, stock transport order, & goods issue due to consumption posting, stock transfers & transfer posting.
    2. This is designed to see the Opening balane+Goods receipt - goods issue = closing balance.
    3.You can't take report only for particulat movement type.
    4.If u want to get the details as per the movement type, then use MB51 report.

  • Amount not turning up for material movement type : 601 from 2lis_03_bf

    Hi all,
    i have loaded the inventory cube from 2lis_03_bx the quantity is turning up for movement type 601 but the amount is not getting reflected it is always blank.
       If   (  SOURCE_FIELDS-BWVORG EQ '000'         "Other Issues
       OR    SOURCE_FIELDS-BWVORG EQ '101'        "Returns / Vendor
       OR   SOURCE_FIELDS-BWVORG EQ '104'         "Material Transfer
       OR  SOURCE_FIELDS-BWVORG EQ '105'          "Stock Adjustment InvD
       OR   SOURCE_FIELDS-BWVORG EQ '106'         "Stock Ajdustment Other
       OR  SOURCE_FIELDS-BWVORG EQ '110' )
       "Issues from stock transfer
       AND SOURCE_FIELDS-BWAPPLNM EQ 'MM'
    only movements which are relevant for stock control
       AND SOURCE_FIELDS-BWBREL EQ '1'
       AND SOURCE_FIELDS-BWGEO  <> 0
    SEE OSS NOTE 630254
       AND (  SOURCE_FIELDS-BSTTYP IS INITIAL OR
                   (  SOURCE_FIELDS-BSTTYP CA 'EQ'  AND
                      SOURCE_FIELDS-KZBWS CA 'AM' ) ).
    *IF THE RETURNCODE IS NOTE EQUAL ZERO, THE RESULT WILL NOT BE UPDATED
         RESULT = SOURCE_FIELDS-BWGEO.
    and i can see for other movement type like 641 the amount is turning up.
    Can anyone advise me on this
    thanks

    does the material movement type : 601 will be updated from this data source : 2lis_03_bx nor it is from 2lis_03_um??
    Can anyone advise me on this!!
    thanks

  • Batch for 641 Movement Type

    Hi Guru;
                  In our system for 641 Movement Type Batch is not coming for Receiving Plant.
    Ex
    MBLNR          MJAHR     BWART     MATNR     WERKS     UMWRK     LGORT       UMLOG        CHARG                 UMCHA
    4900342714     2010     641     1256-3230-0     M300     B311     MA01                   1000015247     
    4900342714     2010     641     1256-3230-0     B311     M300                    MA01                           1000015247
    4900342724     2010     641     1256-2190-0     B121     M100     MA01                  1000016376     
    4900342724     2010     641     1256-2190-0     M100     B121                    MA01                          1000016376
    In Above Data For MAT DOC 4900342714 Batch is not coming for Plant B311. We are doing Batch ageing from the batch creation date.so for these case (i.e for  Stock in Transit data we are not able to show that in our ageing report as it is showing these without batch)
    I want to kw that, is there any problem in our system or its a standard and how to handle this situation.
    Thnaks

    Hi,
    For this you need to set up Strategies for Stock determination.
    Trasncation code : OSPX
    Go to new entries.
    Enter your plant code and any 4 digit key and save.
    Select this entry and click on the stock determination rule. Type any 4 digit key and save.
    Click on Stock determination header. Select your entry, which is having your given plant code,  stock determination group and stock determination rule and click on the stock determination item table.
    there you have to maintain all ur batches as per the combination of Periotity indicator, Storage location and stock indicator.
    For first periority - 1& second periority - 2 & third periority - 3
    Storage location - 0001
    stock indicator - F for standard & K for consignment.
    F 0001 1 A
    F 0001 2 b
    F 0001 3 c
    F 0001 4 d
    This stock determination group ( 4 digit key), you have to maintain in the material master record - MRP2 view.
    Maintain stock determination group and MRP profile - ND
    Then during GR, system will check stock determination group in the MMR and based on that first system stock availability for the first periority batch. If stock is there, it will pick. If stock is not there, system will pick second one.
    Regards
    KRK

  • FI DOCUMENT NOT POSTED FOR 201 MOVEMENT

    HI ALL,
    In one of the my client having one issue for particular one material ,FI document not posted ,while issue the goods to shop floor 201 movement type & same document we cancelled ,but FI document posted. Same cancellation document again cancelled.
    How do we post / Release the same 201 Movement type material documet to FI. Due this my valuation agaisnt GL is inconsistency in MB5L AND MB5B report. Could u please help.
    Rgds
    SumaMani

    Hi,
    the following things have to be concidered for your issue
    1. FI Document is not generated if the price of material is ZERO
    2. check whether during the movement type 261 the material price is ZERO or not
    3. Check whether during the cancellation of that document the material price is changed some how?
    i my opinion during the 261 for that material that material price was Zero and no FI Document was generated and during the cancellation of that document that material has got some price so the FI Document was generated
    Best Regards,
    Ravi Reddy,

  • Error during search for WM movement type (999   E  )

    Dear ALL,
    I am try to reverse transaction 313. i use movement 314 but there is error message during creating delivery. the message is
    "Error during search for WM movement type (999   E  )"
    Could someone help me please ?
    Thanks & Best regrads,
    Saiful arif

    Hi,
    Please check the reference  movement type  in table V_156S_WM for inventory movement 314 and for your case of qty and value update indicators
    For qty updation indicator checked, you will have a reference movement type 3XX and not equal to 999
    for  qty updation indicator not checked, you will have reference movement type 999
    qty updation indicator checked means stock / quantity controlled in which case
    check your set up in transaction OMLR , reference movement 3XX from above table should be assigned to a proper WM movement type 3YY
    then check for WM movement 3YY in Transaction OMLJ which should have source storage  type maintained.
    qty updation indicator not checked means stock / quantity not controlled or updated in which case reference movement type is 999 which has no maitenance in OMLR,  moreover it is no stock / qty and no stock transfers situation
    If 3XX happens to be 999 in your case, then check for 3YY movement in OMLR and check for storage type determination for 3YY in OMLJ
    Please note 999 as WM movement  is used for manual transfer within warehouse but not for warehouse movements resulting from IM.
    Hope this should solve your problem.
    Regds
    Shrihari

  • MIGO T code for 453 Movement type

    hi sap gurus,
    I am getting These error message when i am using MIGO T code for 453 Movement type
    Deficit of BA Ret.blocked prev. 104 EA : NTH-607-P5G 1034 3401 5786051

    This means your stock level in return blocked stock is not sufficientt to be able to carry out the goods movement. Check your stock level for your material in MARD-RETME (or in MB52).
    Mvt 453 means stock transfer from return blocked stock (that was sent back by customer) to your own stock. Return blocked stock is owned by the customer, through this goods movement you take over the ownership of the goods.
    Regards,
    Csaba

  • Auto batch pick in 201 movement type

    hello all,
    i want to pick batch automatically when we issue the goods to costcenter 201 movement type.
    we already have 4 plants in which auto batch determination is already there.when we enter the * in batch field,batch is automatically picked.
    all the plants have same configuration but only for one plant automatic batch determination for movemeny type 201 is not picked.
    regards
    sumit

    Hi,
    movement type also import for same
    check following link
    [http://forums.sdn.sap.com/thread.jspa?messageID=5907502#5907502]
    Regards
    Kailas Ugale

Maybe you are looking for