Full System Back Up
Hi,
How do I perform a full back up of my OS 10.4.11 mac that can be used to completly restore my computer to how it is now at a later date? I've tried searching but the only how to guides seem to involve 10.5 and time machine. I'm sure I've see something about it in disk utilities but I can see it at the moment.
Thanks
Hi-
Use a cloning utility, such as SuperDuper or Carbon Copy Cloner.
I use SuperDuper, and wouldn't ever want to be without it or the system clones that it produces.
Similar Messages
-
I recently used an external hard drive to back up photos etc from my mac, I didn't do a full system back up. Since then a finder window titled 'client node' keeps popping up every time i hit the spacebar. Can anyone help me please stop this happening?
Click on it, choose Get Info from the File menu, and check the format.
If it's formatted as NTFS, reformat it as MS-DOS, exFAT, or Mac OS Extended (Journaled) as desired, or install software such as Paragon NTFS on the computer.
If it's formatted as FAT32 or exFAT, use the Disk Utility's Repair Disk command on it; this may also happen for a flash drive which is about to fail.
If it's formatted as Mac OS Extended, click Authenticate and provide your administrator password, or change the permissions on that specific folder in its Get Info window.
(109318) -
Hey I'm a novice on computers but i've just done a full system restore on my laptop and put it back to factory spec, obviously i backed up all the data on an external hard-drive but when i have re-installed itunes and gone to import all my old music files from my previous itunes library as mpeg4 files it keeps telling me i don't have permission??!! *** someone please explain or tell me how to get music on to my new itunes without having to re-import every cd i own which is alot!!!
Other than iMovie, GB always incorporates the audio files into the GB package. So just save or move the GB project to the external drive, and you're done - anything you import, edit or record will be saved to the external drive.
-
My iPhone 4S kept canceling while syncing. In the Apple support communities, it was recommended that I do a full system restore. I backed the phone up and did the restore. Now it won't finish the restore process. It gets to where it will restore the apps and it says "copying 1 of 51", and then it cancels the sync. I have no apps on the phone - they are all black and they say "waiting". How do I get the apps reloaded on the phone? Do I have to delete them all and redownload them? I'm not even sure that will work. Do I go to Verizon and ask if they can fix it? Any suggestions?
robsta_1980 wrote:
...- no laptop, no desktop, just my iPhone! How can I get my songs back?
Download Past Purchases
http://support.apple.com/kb/HT2519 -
I did a full system restore to my phone along with the new 7.0 update. Now I went to restore my phone setting back through Itunes and it goes through all the steps but when it is completed it wont get past the "Connect to Itunes" screen
So what happens when you connect to iTunes?
-
After Full System Restore, Time Machine Won't Complete Back Up
I successfully did a full system restore using Time Machine. The Restore worked but Time Machine has not worked since I completed the Restore.
It says "Unable to complete backup. An error occurred while copying files to the backup volume.." Please help. I don't know what to do. The TM Widget Activity Log is posted below:
Starting standard backup
BStarting standard backup
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
No pre-backup thinning needed: 529.6 MB requested (including padding), 30.58 GB available
Error: (-36) SrcErr:YES Copying /private/var/CheckUpAgent/data.float.net.sent.ca_history to (null)
Copied 5546 files (34.6 MB) from volume Macintosh HD.
No pre-backup thinning needed: 526.8 MB requested (including padding), 30.54 GB available
Error: (-36) SrcErr:YES Copying /private/var/CheckUpAgent/data.float.net.sent.ca_history to (null)
Error: (-36) SrcErr:NO Copying /private/var/CheckUpAgent/data.float.net.sent.ca_history to /Volumes/Time Machine Backups/Backups.backupdb/Akili Nickson’s iMac/2011-03-17-080109.inProgress/25E02D47-EB07-4E59-B2D8-0A9CF26A0042/Macintos h HD/private/var/CheckUpAgent
Stopping backup.
Error: (-8062) SrcErr:NO Copying /private/var/CheckUpAgent/data.float.net.sent.ca_history to /Volumes/Time Machine Backups/Backups.backupdb/Akili Nickson’s iMac/2011-03-17-080109.inProgress/25E02D47-EB07-4E59-B2D8-0A9CF26A0042/Macintos h HD/private/var/CheckUpAgent
Copied 57 files (23.1 MB) from volume Macintosh HD.
Copy stage failed with error:11
Backup failed with error: 11Akili wrote:
Hi, and welcome to the forums.
Error: (-36) SrcErr:YES Copying /private/var/CheckUpAgent/data.float.net.sent.ca_history
There seems to be a problem with that file. See the blue box in #C3 of [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum).
Note that the /private folder is normally hidden, so you'll need to click the +Show inisible items+ box. -
Error while Scheduling Full DB back up?
Hi gurus,
I got error while schedule full DB back up. I am follow all the steps.but i got this error.
1. go to DB13
2. select Day
3.select full DB backup
4.select time
5.select sid, msdb,inttape,verify backup
5.add.
our DB is MS-SQL server Data Base
client :222 user: admin
error: User not connected
2008-04-10 14:28:06.89 Server Microsoft SQL Server 2005 - 9.00.2047.00 (Intel X86)
Apr 14 2006 01:12:25
Copyright (c) 1988-2005 Microsoft Corporation
Enterprise Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
2008-04-10 14:28:06.89 Server (c) 2005 Microsoft Corporation.
2008-04-10 14:28:06.89 Server All rights reserved.
2008-04-10 14:28:06.89 Server Server process ID is 308.
2008-04-10 14:28:06.89 Server Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG'.
2008-04-10 14:28:06.89 Server This instance of SQL Server last reported using a process ID of 308 at 4/10/2008 2:24:10 PM (local) 4/10/2008 8:54:10 AM (UTC). This is an informational message only; no user action is required.
2008-04-10 14:28:06.89 Server Registry startup parameters:
2008-04-10 14:28:06.89 Server -d C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\master.mdf
2008-04-10 14:28:06.89 Server -e C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG
2008-04-10 14:28:06.89 Server -l C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\mastlog.ldf
2008-04-10 14:28:06.90 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2008-04-10 14:28:06.90 Server Detected 8 CPUs. This is an informational message; no user action is required.
2008-04-10 14:28:07.06 Server Set AWE Enabled to 1 in the configuration parameters to allow use of more memory.
2008-04-10 14:28:07.20 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2008-04-10 14:28:07.21 Server Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2008-04-10 14:28:18.89 Server Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2008-04-10 14:28:18.89 Server Database mirroring has been enabled on this instance of SQL Server.
2008-04-10 14:28:18.89 spid4s Starting up database 'master'.
2008-04-10 14:28:18.96 spid4s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2008-04-10 14:28:19.00 spid4s SQL Trace ID 1 was started by login "sa".
2008-04-10 14:28:19.01 spid4s Starting up database 'mssqlsystemresource'.
2008-04-10 14:28:19.04 spid4s The resource database build version is 9.00.2047. This is an informational message only. No user action is required.
2008-04-10 14:28:19.18 spid4s Server name is 'ERPPRD'. This is an informational message only. No user action is required.
2008-04-10 14:28:19.18 spid9s Starting up database 'model'.
2008-04-10 14:28:19.29 spid9s Clearing tempdb database.
2008-04-10 14:28:19.37 spid9s Starting up database 'tempdb'.
2008-04-10 14:28:19.39 spid9s Analysis of database 'tempdb' (2) is 100% complete (approximately 0 seconds remain). This is an informational message only. No user action is required.
2008-04-10 14:28:19.40 spid12s The Service Broker protocol transport is disabled or not configured.
2008-04-10 14:28:19.40 spid12s The Database Mirroring protocol transport is disabled or not configured.
2008-04-10 14:28:19.40 spid12s Service Broker manager has started.
2008-04-10 14:28:19.42 Server A self-generated certificate was successfully loaded for encryption.
2008-04-10 14:28:19.43 Server Server is listening on [ 'any' <ipv4> 1433].
2008-04-10 14:28:19.43 Server Server local connection provider is ready to accept connection on [
.\pipe\SQLLocal\MSSQLSERVER ].
2008-04-10 14:28:19.43 Server Server named pipe provider is ready to accept connection on [
.\pipe\sql\query ].
2008-04-10 14:28:19.43 Server Server is listening on [ 127.0.0.1 <ipv4> 1434].
2008-04-10 14:28:19.43 Server Dedicated admin connection support was established for listening locally on port 1434.
2008-04-10 14:28:19.43 Server The SQL Network Interface library could not register the Service Principal Name (SPN) for the SQL Server service. Error: 0x54b. Failure to register an SPN may cause integrated authentication to fall back to NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies.
2008-04-10 14:28:19.43 Server SQL Server is now ready for client connections. This is an informational message; no user action is required.
2008-04-10 14:28:19.48 spid21s Starting up database 'msdb'.
2008-04-10 14:28:19.48 spid23s Starting up database 'SRM'.
2008-04-10 14:28:19.48 spid22s Starting up database 'PRD'.
2008-04-10 14:28:20.29 spid23s Analysis of database 'SRM' (6) is 100% complete (approximately 0 seconds remain). This is an informational message only. No user action is required.
2008-04-10 14:28:23.40 spid22s Analysis of database 'PRD' (5) is 100% complete (approximately 0 seconds remain). This is an informational message only. No user action is required.
2008-04-10 14:28:23.95 spid4s Recovery of any in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC) has completed. This is an informational message only. No user action is required.
2008-04-10 14:28:23.95 spid4s Recovery is complete. This is an informational message only. No user action is required.
2008-04-10 14:28:26.37 spid51 Using 'xpsqlbot.dll' version '2005.90.2047' to execute extended stored procedure 'xp_qv'. This is an informational message only; no user action is required.
2008-04-10 14:28:26.53 spid51 Using 'xpstar90.dll' version '2005.90.2047' to execute extended stored procedure 'xp_instance_regread'. This is an informational message only; no user action is required.
2008-04-10 14:28:26.57 spid51 Using 'xplog70.dll' version '2005.90.2047' to execute extended stored procedure 'xp_msver'. This is an informational message only; no user action is required.
2008-04-11 00:00:56.75 spid17s This instance of SQL Server has been using a process ID of 308 since 4/10/2008 2:28:23 PM (local) 4/10/2008 8:58:23 AM (UTC). This is an informational message only; no user action is required.
2008-04-11 16:44:23.89 spid112 DBCC CHECKDB (PRD) started at Apr 11 2008 4:44PM with Logfile: C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\CCMS_CHECK_DB_HIST_2008.txt
2008-04-11 16:52:47.53 spid107 DBCC CHECKDB (PRD) started at Apr 11 2008 4:52PM with Logfile: C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\CCMS_CHECK_DB_HIST_2008.txt
2008-04-11 17:00:01.48 spid115 DBCC TRACEON 3605, server process ID (SPID) 115. This is an informational message only; no user action is required.
2008-04-11 17:00:10.45 spid115 Error: 18204, Severity: 16, State: 1.
2008-04-11 17:00:10.45 spid115 BackupTapeFile::OpenMedia: Backup device '
.\tape1' failed to open. Operating system error 2(The system cannot find the file specified.).
2008-04-11 17:00:10.67 Backup Unnamed tape was dismounted from drive 'R3DUMP1(
.\tape1)'. This is an informational message. No user action is required.
2008-04-11 17:00:10.65 Backup Error: 3041, Severity: 16, State: 1.
2008-04-11 17:00:10.65 Backup BACKUP failed to complete the command BACKUP DATABASE PRD. Check the backup application log for detailed messages.
2008-04-11 17:00:11.18 Backup Tape 'Media created 3/29/2007 at 2:43 PM' was dismounted from drive 'R3DUMP0(
.\tape0)'. This is an informational message. No user action is required.
2008-04-11 17:00:15.54 spid101 DBCC TRACEON 3605, server process ID (SPID) 101. This is an informational message only; no user action is required.
2008-04-11 17:00:15.60 spid101 Error: 18204, Severity: 16, State: 1.
2008-04-11 17:00:15.60 spid101 BackupTapeFile::OpenMedia: Backup device '
.\tape1' failed to open. Operating system error 2(The system cannot find the file specified.).
2008-04-11 17:00:15.60 Backup Unnamed tape was dismounted from drive 'R3DUMP1(
.\tape1)'. This is an informational message. No user action is required.
2008-04-11 17:00:15.60 Backup Error: 3041, Severity: 16, State: 1.
2008-04-11 17:00:15.60 Backup BACKUP failed to complete the command BACKUP DATABASE PRD. Check the backup application log for detailed messages.
2008-04-11 17:00:15.60 Backup Unnamed tape was dismounted from drive 'R3DUMP0(
.\tape0)'. This is an informational message. No user action is required.
2008-04-11 17:02:57.57 spid114 DBCC CHECKDB (PRD) started at Apr 11 2008 5:02PM with Logfile: C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\CCMS_CHECK_DB_HIST_2008.txt
2008-04-11 18:30:37.75 spid112 DBCC CHECKDB (PRD) WITH no_infomsgs executed by NT AUTHORITY\SYSTEM found 0 errors and repaired 0 errors. Elapsed time: 1 hours 46 minutes 14 seconds.
2008-04-11 18:54:52.10 spid114 DBCC CHECKDB (PRD) WITH no_infomsgs executed by NT AUTHORITY\SYSTEM found 0 errors and repaired 0 errors. Elapsed time: 1 hours 51 minutes 55 seconds.
2008-04-11 18:55:25.00 spid107 DBCC CHECKDB (PRD) WITH no_infomsgs executed by NT AUTHORITY\SYSTEM found 0 errors and repaired 0 errors. Elapsed time: 2 hours 2 minutes 38 seconds.
2008-04-12 00:00:30.75 spid17s This instance of SQL Server has been using a process ID of 308 since 4/10/2008 2:28:23 PM (local) 4/10/2008 8:58:23 AM (UTC). This is an informational message only; no user action is required.
This is error
anybody help me.
Regards,
balaram
Edited by: balaram reddy on Apr 14, 2008 8:44 PMIf your ECC6 is on SP12 and above, use t-code : DBACOCKPIT or DB13OLD
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0dc0752-2502-2a10-2a93-94823467ca79 -
Can I do a full system restore of a 10.5 system by booting on a 10.6 CD?
Dear all,
I am trying to support my parents whos MacBook just failed (harddisk dead). They have now gotten a new harddisk installed and wants to restore the setup from their TimeCapsule.
I would prefer to do a full system restore, so that it gets back to exatly how they had it before. A 'user only' setup would require them to reinstall all third party apps including MS Office etc., which will be tricky for them.
Few questions:
1. Does a 'full system restore' restore everything, including applications and system files? Will it be going back to an exact clone of what they had?
2. They ran a Mac OS 10.5.x system, but cannot find their installation CD. Can I lend them my Mac OS X 10.6 (Snow Leopard) CD to boot, while still restoring their 10.5.x system? (I don't want them to have 10.6 as I am not sure about compability with all their 3rd party software/drivers etc.)
3. Any other things I should keep in mind for a successful restore?
Thanks,
MagnusMagnus Olsson wrote:
2. They ran a Mac OS 10.5.x system, but cannot find their installation CD. Can I lend them my Mac OS X 10.6 (Snow Leopard) CD to boot, while still restoring their 10.5.x system?
No. Well, you can do the restore, but it won't boot.
You need a Leopard disc. It can be the original that came with their Mac, or a Retail (black) version, and it doesn't matter what version of Leopard it is, since you don't load OSX but only use the Installer utility. Thus borrowing one doesn't violate the license.
They really should have a Leopard disc, not only to do a restore, but also if they need to do a +*Repair Disk+* on the internal HD. And they would need the original disc, for the Apple Hardware Test on it; AppleCare will send them a replacement for a nominal fee.
3. Any other things I should keep in mind for a successful restore?
Yes. See #14 in the Frequently Asked Questions *User Tip,* also at the top of the +Time Machine+ forum, for detailed instructions. Note the caution there, under the green box, about turning TM off immediately after the restore. -
How can one do a full system restore from Time Machine to a Macbook Air
I recently had a major crash on my two internal disc DualG5. The system internal disk failed completely and I used Time Machine to do a full system restore to the second internal disc. It worked PERFECTLY!! I followed the instructions in support
http://docs.info.apple.com/article.html?path=Mac/10.5/en/15638.html
This involved inserting the Leopard DVD into the optical drive and backing up from my external LaCie time machine backup.
I also have a MacBook Air. I use an external USB HD drive as Time Machine backup. The Air only has one USB port. I have an external DVD drive for the Air. Clearly, I will not be able to mount the DVD and External disk at the same time unless I use a small hub. I guess this will work but is there any other work around. Could I do a full reinstall and then connect the external HD?Richard,
Alternatively, you could use Remote Disc Sharing (via the DualG5) to do the install and reserve the USB port for the Time Machine disk.
[http://support.apple.com/kb/HT1131]
[http://support.apple.com/kb/HT1777]
Let us know if this was helpful.
Cheers! -
Ho do i restore my files from time machine after a full system restore?
I have just had a full system restore on my MAC, thanks to the genious bar in Bondi, prior to doing this i backed everything on my external hard drive using time machine, i now want to put everything back on to my MAC, including emails, music, photos, movies and important docs etc. what is the best way to do this?
cheers Colin,See Here > How do I restore my entire system?
From Here > http://pondini.org/TM/FAQ.html
More Info Here > http://pondini.org/TM/Troubleshooting.html -
Hi, following this post, I'm seeking help concerning a big problem with my wifi.
In fact, it has been a few months since my wifi interface isn't recognized anymore. Yesterday, after a few tests, I found it was due to the kernel version, so I tried to reinstall my first ArchLinux (Linux 3.13.5-1-ARCH) : it worked, my wifi was back. The problem was that I couldn't reinstall all my stuffs : so I did a full-system upgrade (knowing I will lose my wifi) and now I just want to fix it once and for all (I'm done dealing with it).
So now, your help would be very appreciated. Does anyone have an idead? Or need more details about my config, my laptop, or whatever?
Last edited by nugetchar (2014-08-09 20:30:44)Okay then, here we go :
When I do a
lspci
I have the following output :
[nugetchar@arch ~]$ lspci
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
00:1c.3 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 (rev c4)
00:1c.5 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 6 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation QM77 Express Chipset LPC Controller (rev 04)
00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: NVIDIA Corporation GF108GLM [NVS 5200M] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GF108 High Definition Audio Controller (rev a1)
03:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)
0c:00.0 SD Host controller: O2 Micro, Inc. OZ600FJ0/OZ900FJ0/OZ600FJS SD/MMC Card Reader Controller (rev 05)
So, as you can see, the Network Controller is the following :
03:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)
When I do a
ip link
this is what I obtain :
[nugetchar@arch ~]$ ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eno1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
link/ether f0:1f:af:25:3b:13 brd ff:ff:ff:ff:ff:ff
6: enp0s20u2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN mode DEFAULT group default qlen 1000
link/ether 6e:d6:2d:5c:29:bd brd ff:ff:ff:ff:ff:ff
I started reading this page but am not sure if it is relevant due to the fact it concerns the 3.8.2B version.
Finally, a
more /etc/modprobe.d/modprobe.conf
gives me the following output :
^C[nugetchar@arch ~]$ more /etc/modprobe.d/modprobe.conf
alias floppy off
blacklist fd0
blacklist floppy
blacklist ipv6
blacklist bcma
blacklist pcspkr
blacklist snd_pcsp
I think I need to unblacklist bcma ?
@ewaller : I just saw you reply, here is the output for ls /lib/modules
[nugetchar@arch ~]$ ls /lib/modules
3.15.8-1-ARCH extramodules-3.13-ARCH extramodules-3.15-ARCH
Thank you for your answers, I really appreciate it -
If I update from 10.6.8 to Mavericks and I have a time machine backup, can I do a full restore back to 10.6.8 and resume as if I had never updated if there is a problem? Probably an answer I should know but I don't. Thanks in advance! (instruction suggestions welcomed)
Upgrading the OS is a system wide thing. So all users will receive the upgrade.
It should not delete files and such. However, if you have for example files made with Pages '09. Then the new Pages that comes with Mavericks will make a copy of those files so you can continue to edit them. But those new files can not be opened in Pages '09. BUT again, some people perfer Pages '09 and they use that still. Mavericks will just hide Pages '09, it's still usable in Mavericks just hidden.
To be safe, make a back up of your system before doing any major upgrade.
KOT -
Unable to boot after Time Machine full system restore!!
I was having some serious slowdowns with my computer. I did multiple RAM and HD hardware tests, everything seemed to be working fine. I had recently deleted a bunch of files in order to free up some HD space, so I thought that may be the culprit. So I did a Time Machine backup and restored the Powerbook to it's original 10.3 software. All was fine. Then I upgraded back to 10.5 and all was fine. Then I did a Time Machine full system restore overnight and got the message "Your restore was successful, you must now restart your computer" (or something to that effect). Now I get the start-up chime and startup screen (apple logo) but then the computer shuts itself down. I have reset the PMU and PRAM to no effect. I have tried booting up in safe made, also no dice. I have tried starting it up with the time machine HD attached - doesn't help. I guess I'll need to hit the genius bar but wanted to ask the friendly discussion forum folks first. thanks in advance.
Hi coldengray
Did you try to start from your System-CD? Hold down C-key during startup, start DiskUtility from the menu and verify/repair disk and permissions there.
If the CD is not available you can also connect your TimeMachine-Disk, select it as startup volume in System Preferences/StartupDisk, restart and then run DiskUtility from folder Applications/Utilities
Good luck P -
Unable to boot up after full system restore
I was having some serious slowdowns with my computer. I did multiple RAM and HD hardware tests, everything seemed to be working fine. I had recently deleted a bunch of files in order to free up some HD space, so I thought that may be the culprit. So I did a Time Machine backup and restored the Powerbook to it's original 10.3 software. All was fine. Then I upgraded back to 10.5 and all was fine. Then I did a Time Machine full system restore overnight and got the message "Your restore was successful, you must now restart your computer" (or something to that effect). Now I get the start-up chime and startup screen (apple logo) but then the computer shuts itself down. I have reset the PMU and PRAM to no effect. I have tried starting it up with the time machine HD attached - doesn't help. I guess I'll need to hit the genius bar but wanted to ask the friendly discussion forum folks first. thanks in advance.
Did you sort it? Same thing happened to me and I am having to do another 8 hour restore!
-
Latency leads to full system Failure in Exchange 2010 - Resolved in 2013?
My work encountered a bug - and for no lack of trying - I could not find any bug submission for Ex2010 anymore. Since Most programming relies on the foundation of the past - if replication service was implemented the same in 2013 than it could leave
to a full system failure.
The issue is something happened in REPLICATION service in such a fashion that it accepted a connection, and in the programming it set a variable to a LARGE NUMBER (fail closed) to replace for "Copy Queue
length" in the ball park of 922 quadrillion.
The service never updates this value because of its quasi-state and some timeout occurs and now the GOOD servers think their copy is ludicrously behind. This causes the GOOD servers to attempt to fail-over - as they believe their copy from the BAD
server has failed or perhaps another check fails...
[6 DAG pieces on 3 servers, 4 pieces per server]
In my scenario Server 3 holds:
1 part of server 2 <= Tells server 2 you're bad - don't fail over
1 part of server 1. <= Tells server 1 you're bad - don't fail over
2 parts its own <= "good" - though dead replication service
As I do not know if this exploitable by simply placing a listener in place of replication service to accept and do not respond to connections - I do not know. However, there is a "bug" or flaw in my opinion to allow 1 bad server to superceed
two good servers based on a partial service crash. Simply stopping replication service on Server 3 allowed Server 1 / 2 to take over with out issue - I then restarted replication service and no issue since.
Since i wasted an hour looking where to submit this - this forum will hopefully do - I am very much a white hat - but I am dislike the non-simple way before me to disclose said information to the creator. I want my hour back for their non-intuitive
process, or maybe the simply don't care about Exchange 2010.
- DanPlease note "LATENCY" in my topic is not network but inter-process on a single host, and is used as saying a timeout occurs without value.
Maybe you are looking for
-
In 10g can we dump control file and get SCN info.
Hi, I have a question can any one help me on this. In 9.2.0.5 we could dump the control file and get the SCN using the command : alter session set events 'immediate trace name CONTROLF level 10'; In 10.1.0.4.0 the output of the dump has changed and w
-
Automatically write changes to XMP crashes Lightroom!
Everytime I turn on the option "automatically write changes to XMP" my processor load rises to 100%. So far so understandable. LR is trying to update all of my 40000 images with xmp data. We've already discussed that there is no progress-bar indicati
-
I accidently deleted all contacts in a iphone
when I try to restore them with a back-upcopy, I see them for a moment and then they disappear. What am I doing wrong?
-
I know that this is not necessarily the right forum, but the FreeBSD forum haven't been able to help me... I recently updated my FreeBSD 8.0 RC3 to 8.1 and after the update I can't import my zpool. My computer says that no such pool exists, even thou
-
PCD error SAP EP 2004S, SP14
Hi, After upgrading from SP10 to SP14 on our 2004s portal, we get the following PCD error when accessing the dynamic content of a deltalinked page: Exception ID:10:45_28/05/08_0013_16931450 [EXCEPTION] com.sapportals.portal.prt.component.PortalCompon