Full text search on PLM Web UI
Hello,
Full text search functionality in DMS with TREX solution , is working with SAP GUI. ( Original is checked in CV01N or CV02N )
Same functionality is not working with PLM Web UI .
Is there any setting has to be activated for this.
Thanking you,
Regards,
Satya
Hi ,
Yes. When I checkin Document in CV01N , then I can find in CV04N.
But if I check original in PLM Web UI , then I can not find in CV04n.
I assume that indexing will not problem as it is working in SAP GUI case.
Indexing functionalities ( TREX ) are not called when Document is checked in through PLM Web UI.
Where we can check these settings ?
Thanking you,
Regards,
Satya
Similar Messages
-
How to enable Full text search feature in Azure SQL DB - Web Edition
I have created an instance of Azure SQL DB web edition (basic), using the BizSpark a/c, for one of my global search feature, I need to enable/install full-text search , I don't find this option in Azure SQL DB web edition that I installed , would
appreciate any help on this.Unfortunately full text search is not supported in Azure SQL DB.
Cotega - Azure SQL DB Monitoring, Notification and Scheduling service -
Full text search for web ? Yes or no ?
Hi,
I have a DB that has more then 1.8mil records in a single table .... and would like to implement full text search or some sort of caching for quicker Web search ....
Let me describe you what I have .... The table that holds 1.8mil records is made out of 30 clob columns ... each holding text .... actually these are alphabetic columns ... so words that start with char 'A' are in the first clob ... 'B' in second 'C' in third and so forth ....
Searching is always done first by customerID and CreateDate which are both indexed columns , and then clobs are searched using instr ...
Execution plan was good ... but searching times started to increase ....
So therefor I would like to improve the search ... by implementing some sort of caching mechanism ....
I read a lot about this and found an example where I would create a table containing unique words and table for occurrences of the words ... but this would then
make like 1.8mil articles containing approc 500 words , which would then repeat through articles ... so ok there would be less then 50.000 unique words (in our language ) , but the occurrences would dramatically increase cause every word inside article has to have a link in occurrences table ... so this would then be like 900mil records inside table ..
Is this at all possible to have so many records inside single table ? And still make it quick ?
Is the Oracle Full text search the only right way in this situation ?
Any suggestions ? Did anyone implement anything like this ?
Thanks,
KrisLet's start with your Oracle version. Please specify which version you run because Text capabilities vary dramatically between releases.
>
I tried using Oracle Text as suggested ... now if I understand correctly ....
CTXCAT - would be great because when new records are added, index is updated automatically .... but doesn't support CLOBs ... so no go
>
CTXCAT is a concatenated transactional index that is supposed to optimize combined searches on text and other columns. No go for you as it indeed does not support CLOB columns.
>
CONTEXT - supports CLObs , but I need to explicitly synchronize index ....
There are like 4000 inserts per day ..... and they all need to be indexed in a real-time ...
>
Not true, at least since 10g: SYNC(ON COMMIT) parameter makes this index type transactional (it's synchronized automatically on commit with this parameter set.)
>
If CTX_DLL.SYNC_INDEX procedure synchronize the whole table which is now 1.8mil records, this can take a while ... so it can't be run after inserts ....
>
It does not, it only synchronizes changed data since last sync operation.
So CONTEXT is actually perfectly suited for your needs (just redesign those 30 columns into one document column and index it.) Note that you need to regularly maintain CONTEXT indexes by scheduling CTX_DDL.OPTIMIZE_INDEX to run at off-hours and purge stale/removed data and rebuild its own internal index bitmaps for better performance. Otherwise you will see performance degrade as changes to the indexed data accumulate. You might also want to tweak initial indexing parameters, especially MEMORY parameter, as it greatly affects resulting index fragmentation - the more memory you give for initial indexing or optimization, the less fragmented and the more performant the index will be all other things equal. -
Full text search with XML input in Oracle
Hi,
I need to develope a web application which can do full text search for a library. We will use XML as the input data format and stored XML file in Oracle. How can I do full text search to the XML according todifferent tags or elements. e.g search from title or from article.
Do not only convert XML to Ascii and do the full text search. It should utilize the XML tag and structure.
InterMedia text in 8i or Oracle text in 9i? Or any other toolkit?
Thanks a lot
JackPlease refer to Oracle Text documentation
-
Problems using and configuring Oracle 10gR2 database full-text search
I am having problems trying to set up full-text indexing and search with Universal Content Management (UCM). I followed the Oracle Content Server Installation Guide for windows at [http://download-west.oracle.com/docs/cd/E10316_01/cs/cs_doc_10/documentation/integrator/install_cserver_win_10en.pdf].
What I did was:
1. Modify E:\oracle\ucm\server\config\config.cfg by adding SearchIndexerEngineName=DATABASE.FULLTEXT to the end of the file.
2. Restart the content server.
3. Rebuild the search indexing using Repository Manager.
However, I keep seeing the following error when I query by entering words in the "Full-Text Search" box.
Unable to retrieve search results. Unable to retrieve search results. Unable to create result set for query 'SELECT IdcColl1.dID, dDocName, dDocTitle, dDocType, dRevisionID, dSecurityGroup, dDocAuthor, dDocAccount, dRevLabel, dFormat, dOriginalName, dExtension, dWebExtension, dInDate, dOutDate, dCreateDate, dPublishType, dRendition1, dRendition2, VaultFileSize, WebFileSize, URL, dFullTextFormat, dFullTextCharset, DocMeta.*
FROM IdcColl1, DocMeta
WHERE IdcColl1.dID=DocMeta.dID AND (((CONTAINS(dDocFullText,'test') > 0 ))) ORDER BY dInDate Desc'. ORA-20000: Oracle Text error:
DRG-10599: column is not indexed
Some web searches suggested the following (all of which I have tried but not resolved this problem).
1. Publish the schema using Configuration Manager (applet) and then rebuild index
2. Set the dDocFullText as a "zone field". This is not possible, because dDocFullText does not show up under the list of fields under "Database" or "DatabaseFullText" for the Search Engine drop down (when using Zone Fields Configuration).
3. Reboot the server (did not work either).
I logged onto the Oracle database and checked the IdcColl1 table. There is indeed, no index for the field, dDocFullText. There is only 1 index for the field, did. The field, dDocFullText, is a BLOB. The question is, if I am supposed to create an index manually for this field, how would I do it? A web search has not been fruitful in answering this question.
Here are my server settings.
For UCM:
Operating System: Windows 2003 Enterprise
UCM : 10gR3
Memory: 1 GB
Web Server: Apache 2.2.11
For Oracle:
Operating System: Windows 2003 Enterprise
Oracle: 10gR2
Memory: 1 GB
Thanks.I found out what the problem was. The problem was that I had to create the role, stellent_role, as described in the installation manual. After I created this role and assigned the database user to this role, a restart of the Content Server services and collection rebuild of the index fixed the problem.
However, I did notice one thing. I checked in 3 PDF files, and when I used Repository Manager to do a collection rebuild, I noticed that for Indexer Counters, the count for Full Text was 0 and the count for Meta Only was 3.
Anyone have any ideas? Is there something else that I missed? From reading the installation manual, it was not clear how database full-text indexing/searching would handle PDF files. -
E-Recruiment: Full Text Search Not Working
Hi Guys,
We have a problem with the integration of SAP E Recruitment and TREX Search Engine. Maybe someone can share their idees if same problems occured.
We have of course done investigations on SAP marketplace and the sdn community. In Fact the TREX is configured and works fine for searches with drop down selections, etc> When using full text search however no responses are shown. When performing searches on the indexes in TREX itself we have results on free texts.(as example Web Dynpro application Full Text Search )
Does anyone has a clue where to look? Of course customizing have been reviewed several times. Thanks in advance for any feedback.
Regards
ReginaldI am having the same problem but now in my case the RFC_PERIODICAL_SERVICES job keep running eventually we have to kill it..
It usually runs for less than a min but now it is running for hours..
I have reindex a few time and turn that job off when i was reindexing but still no resolution. Search works in trex admin tool but still not able to search threw website.
I openned up a high priority ticket with sap. Any suggestions would be great.. -
Full-Text search is not working with PDF files - SQL Server 2012 64 bit
Hi,
We are in the process of storing PDF files in SQL Server 2012 with Full-Text search capability.
I followed the steps as below and it works fine with word document but not for PDF files. I tried with PDF ifiler 11 & 9 and both are unsuccessful.
Server/DB Level Settings:
1)
Enable FileStream
2)
Install Full-Text
then restart
3)
Use [specific db]
alter
database [db name]
add
filegroup Files
contains filestream;
alter
database [db name]
add
file (
name = N'Files',
filename =
N'D:\SQL\DATA') to
filegroup [Files];
3)
Database level
Settings:
FileStream:
FileStream
Directory name:
[Set the name]
FileStream
non-transacted
Access: [set Appropriate]
3a)
Add a
datafile to DB
with filestreamdata
filetype.
4)
Share D:\SQL\DATA
directory and
add specific accounts
with read/write
access
5)
Give bulkadmin
access to those
specific accounts
at server
level
6)
From the
page (link)
download and
install the *.pdf
IFilter for
FTS. Link:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5542
7)
To the
PATH global system
variable add
path to the
catalog,
where you installed
the plugin.
Default for
this version is:
C:\Program
Files\Adobe\Adobe
PDF iFilter 9
for 64-bit
platforms\bin
8)
From the
page (link)
download a
FilterPackx64.exe
and install
it. Link:
http://www.microsoft.com/en-us/download/confirmation.aspx?id=20109
9)
Now from
SSMS execute the following
procedures:
-sp_fulltext_service
'load_os_resources',1
-sp_fulltext_service
'verify_signature', 0
EXEC
sp_fulltext_service
'update_languages';
-- update language list
EXEC
sp_fulltext_service
'restart_all_fdhosts';
-- restart daemon
reconfigure
with override;
10)
Restart the
server
11)
select document_type,
path from
sys.fulltext_document_types
where document_type
= '.pdf'
-select
document_type,
path from sys.fulltext_document_types
where document_type
= '.docx'
12) Results are OK.
Following is my Table /Index/ catalog script:
CREATE
TABLE dbo.DocumentFilesTest
DocumentId INT
IDENTITY(1,1)
NOT NULL
PRIMARY KEY,
AddDate datetime
NOT NULL,
Name nvarchar(50)
NOT NULL,
Extension nvarchar(10)
NOT NULL,
Description nvarchar(1000)
NULL,
FileStream_Id UNIQUEIDENTIFIER
ROWGUIDCOL NOT
NULL UNIQUE DEFAULT
NEWSEQUENTIALID(),
FileSource varbinary(MAX)
FILESTREAM DEFAULT(0x)
go
--Add default add date for document
ALTER
TABLE dbo.DocumentFilesTest
ADD CONSTRAINT
DF_DocumentFilesTest_AddDate
DEFAULT sysdatetime()
FOR AddDate
EXEC
sp_fulltext_database
'enable'
GO
IF
NOT EXISTS
(SELECT
TOP 1 1 FROM sys.fulltext_catalogs
WHERE name
= 'Ducuments_Catalog_test')
BEGIN
EXEC sp_fulltext_catalog
'Ducuments_Catalog_test',
'create',
'D:\SQL\PDFBlob';
END
--EXEC sp_fulltext_catalog 'Ducuments_Catalog_test', 'drop'
DECLARE
@indexName nvarchar(255)
= (SELECT
Top 1 i.Name
from sys.indexes
i
Join sys.tables
t on
i.object_id
= t.object_id
WHERE t.Name
= 'DocumentFilesTest'
AND i.type_desc
= 'CLUSTERED')
PRINT @indexName
EXEC
sp_fulltext_table
'DocumentFilesTest',
'create',
'Ducuments_Catalog_test',
@indexName
EXEC
sp_fulltext_column
'DocumentFilesTest',
'FileSource',
'add', 0,
'Extension'
EXEC
sp_fulltext_table
'DocumentFilesTest',
'activate'
EXEC
sp_fulltext_catalog
'Ducuments_Catalog_test',
'start_full'
ALTER
FULLTEXT INDEX
ON [dbo].[DocumentFilesTest]
ENABLE
ALTER
FULLTEXT INDEX
ON [dbo].[DocumentFilesTest]
SET CHANGE_TRACKING
= AUTO
ALTER
FULLTEXT CATALOG
Ducuments_Catalog_test REBUILD
WITH ACCENT_SENSITIVITY=OFF;
INSERT
INTO DocumentFilesTest(Extension,
Name,
FileSource)
SELECT
'pdf'
'BOL12006553.pdf'
* FROM
OPENROWSET(BULK
'd:\SQL\PDFBlob\BOL12006553.pdf',
SINGLE_BLOB)
AS BLOB;
GO
INSERT
INTO DocumentFilesTest(Extension,
Name,
FileSource)
SELECT
'docx'
'test.docx'
* FROM
OPENROWSET(BULK
'd:\SQL\PDFBlob\test.docx',
SINGLE_BLOB)
AS Document;
GO
SELECT
d.*
FROM dbo.DocumentFilesTest
d WHERE
Contains(d.FileSource,
'BILL')
Returns nothing. it should come from PDF file
SELECT
d.*
FROM dbo.DocumentFilesTest
d WHERE
Contains(d.FileSource,
'TEST')
Returns from word document as follows:
2 2014-06-04 10:11:41.393 test.docx docx
NULL [BINARY Value] [Binary Value]
Any help is appreciated. Its been a long wait.
Thanks,
Vel
Vel ThavasiHello,
Did you check the fulltext log files for more details about the errors. If the filter isn’t working, there should be errors in the error log file.
The following thread is about similar issue, please refer to:
http://social.msdn.microsoft.com/forums/sqlserver/en-US/69535dbc-c7ef-402d-a347-d3d3e4860d72/sql-server-2008-64bit-fulltext-indexing-pdf-not-working-cant-find-ifilter
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support -
TREX/Content Server: Full text searches not working
I've setup TREX and Content Server in a sandbox environment and have been trying to get my head around DMS. I've completed what I've believed are the required steps (outlined below) and I have submitted 12 documents of various types into the respository. I'm able to perform meta data searches but not full text searched. Any ideas what I might have missed?
Much thanks!!!!
/Greg
0. Defined connection to TREX Server: TREX_42 (SM59); Using TREXADMIN all services are green.
1. "Define Document Area" - DMS is present; assumed I would use this one.
2. "Defined Indexing Readiness" - selected "Index Release" & "Classify" for DMS; set "Search Srv" to DMS_TEST
3. "Define Content Respository" - Created Z_CR_001 and maintained it as follows:
- Documentation Area: Document Management System
- Storage Type: HTTP content server
- HTTP Server: srv-sptxd2-dal.intervoice.int (content server)
- Port: 1090
- HTTP Script: ContentServer/ContentServer.dll
- Physical Path: /usr/sap/IRD/SYS/global/
4. "Define Content Categories" - Created ZCSSTRUCT; maintained as follows:
- Document Area: DMS
- Content Rep: Z_CR_001
5. Checked CSADMIN for Z_CR_001 - All Green
6. Went into SKPR07 (monitoring tab); entered DMS_PCD1 and "Indexing possible", "Auto indexing" and "DocArea activated" is all green.
7. Went into SMRO
- created SSR: "Search Server ID" = DMS_TEST, "Search engine" = DRFUZZY
- Verified "RFC Destinations"; passed tests; all green.
8. Went into SKPR07; using DMS_PCD1 as document class.
- executed "Clean up table entries"
- deselected "Limited to selected language"
- executed reindex. "Copied successfully from search engine"
- Selected the created index category
- Set the "Document area" indicator
- execute "Trigger process"; 12 documents referenced
9. Going into TREXADMIN I can see the created index; however the document count = 0. Also there is no queue created -- should there be?
Edited by: Greg Preston on Aug 5, 2009 9:11 PMDear
this link will help you,
TREX Architecture
http://help.sap.com/saphelp_erp60_sp/helpdata/EN/71/b26b2bfdc4eb47ab5432e8444290ce/content.htm
File Formats Supported by TREX
http://help.sap.com/saphelp_erp60_sp/helpdata/EN/55/cb634114b78047e10000000a1550b0/content.htm
Detail about TREX Configuration (Basic to advance)
http://help.sap.com/saphelp_erp60_sp/helpdata/EN/46/bab1d48b0a1514e10000000a114a6b/content.htm
Regards
Tushar Dave
Edited by: Tushar Dave on Aug 6, 2009 9:59 AM -
Hello,
I am trying to install Microsoft SQL Server 2008 R2. I get the error bellow (Database Services Engine Failed, SQL Server Replication Failed, Full Text Search Failed, Reporting Services Failed). I already have a copy of SQL Server 2008 R2 on the machine.
I want to create a new named instance of SQL Server for some software I'm installing.
The error is below.
Any help would be much appreciated, thanks!
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal): -595541211
Exit facility code: 1152
Exit error code: 49957
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Start time: 2014-02-06 09:14:09
End time: 2014-02-06 11:18:16
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.50.2500.0%26EvtType%3d0x44D4F75E%400xDC80C325
Machine Properties:
Machine name: BAHPBZ52TY
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Sql Server 2008 R2 SQLEXPRESS MSSQL10_50.SQLEXPRESS Database Engine Services
1033 Express Edition 10.50.1600.1 No
Sql Server 2008 R2
Management Tools - Basic 1033 Express Edition
10.50.1600.1 No
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
Installation location: c:\c7ced2c86d6b9813b28186cc831c2054\x64\setup\
Installation edition: EXPRESS_ADVANCED
Slipstream: True
SP Level 1
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: True
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE:
CUSOURCE:
ENABLERANU: True
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION,FULLTEXT,RS,SSMS,SNAC_SDK,OCS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: c:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: c:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: aedt2bSQL
INSTANCENAME: AEDT2BSQL
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE: c:\c7ced2c86d6b9813b28186cc831c2054\PCUSOURCE
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: BAH\568385
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
UIMODE: AutoAdvance
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xDC80C325
Configuration error description: Access is denied
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Feature: SQL Client Connectivity SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xDC80C325
Configuration error description: Access is denied
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xDC80C325
Configuration error description: Access is denied
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Feature: Reporting Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xDC80C325
Configuration error description: Access is denied
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Feature: Management Tools - Basic
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Microsoft Sync Framework
Status: Passed
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\SystemConfigurationCheck_Report.htmHello,
If you see error descriptioon it gives access denied so basically it is because of some access issue.I guess You must be using some domin account for installation make sure it is added as local administrator also instead of using NT Authority network
service as SQL server service account use local system account .
Below link would help
http://serverfault.com/questions/212135/access-is-denied-error-installing-sql-server-2008-on-windows-7
You can also browse to setup.exe file and RK on it and select run as administrator
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
I have downloaded JavaHelp using Sun Download Manager (download and extract JavaHelp) to activate Full-text Search in RoboHelp. But, while generating Help in RoboHelp, I get an error that JavaHelp is not installed. I am not able to understand how to Install JavaHelp. Please help.
That's the way it worked in X4 and later versions up but not including RH8. RH8 includes phrase searching in webhelp.
See www.grainge.org for RoboHelp and Authoring tips -
Document Management / Full Text Search in Projects & SolMan Directory
Hello experts!
I want to implement Full Text Search in my SolMan and therefore need your help.
I have installed Trex 7.10 and am already able to search within my Solution Database (Problems/Solutions).
Now I want to be able to search within all documents in my SolMan Installation - e.g. Roadmaps, SAP Scenario Descriptions or my own uploaded documents.
In the IMG I already found the section Document Management but I cannot get the needed RFCs (IMSDEFAULT and IMSDEFAULT_REG) working.
There is already a RFC called IMSDEFAULT, which was created during the installation of Trex and runs the
Registered Server-Program: Trex_SOT_20080327090311
I tried to configure my RFCs according to the IMG but, as I said, cannot manage to get them working.
I hope anybody has an idea or an guide on how to implement Full Text Search!
Please be so kind and provide help - thanks in advance!
Best regards
GeroldGerold,
I am running into the same issues because we want to do full text search on project documentation within Solution Manager. The default RFC connections IMSDEFAULT_REG and IMSDEFAULT do not work with the standard settings.
We created one index for IWBSOLAR so maybe I also need to check IWBPROJ in SKPR06 for project documentation and create a new index for this one ?
The indexing for IWBSOLAR now fails although there seem to be over 6000 documents marked but none are put in the index. After indexing there is a list of the documents all with code 6401 but cannot find any where what this code means. It seems to be succesful as all entries are green.
Any help/suggestions on this topice would be greatly appreciated. -
External URL Mapping and Full-Text Search Generation
I have a dilemma,
I can map external URL all fine e.g.
<map version="1.0">
<mapID target="Welcome" url="http://docweb.net/help/test.html"/>
</map>
but the html files are not contained in the local directory, and thus the jhindexer is unable to (as far as i know anyway) generate full-text search using the externally linked html files
also from using a decompiler I have found that you can "force" it to generate the help for external urls (as the indexer prefixes all urls with the "file:" protocol, but I can only get this to work under debug mode, else it gives a heapSpace exception, so I wish to avoid having to do anymore unneccesary digging/decompiling.
Also just as a gripe, why is most of the java help source code unavailable, and the Indexer seems to be very inflexible (ontop of not having any documentation)That's the way it worked in X4 and later versions up but not including RH8. RH8 includes phrase searching in webhelp.
See www.grainge.org for RoboHelp and Authoring tips -
Full text search in local CD-ROM app
Hi all,
I want to develop a local application deploying in CD-ROM,
and I want to use about 1.000 PDF documents.
I thing that it's a good idea to convert the PDFs to SWFs
using the FlashPaper.
My answer is how can I make a full text search using the
contents of these files. Is it possible?
Thanks in advanceHi,
We can create a custom tool for you that will enable you to
search text in
ALL your pdf files. That's not a problem.
If this sounds interesting read this
http://hire.flashjester.com
Regards
FlashJester Support Team
e. - [email protected]
w. -
http://www.flashjester.com
There is a very fine line between "hobby" and
"mental illness." -
Full-Text Search has not worked since we upgraded to 2012
I have a filestream database and table. Our full-text searches have always worked until we upgraded to SQL 2012 in December. Now, no file that has been uploaded since December is searchable. What has gone wrong here. It should have been
a clean upgrade. We are not getting any error messages. We are just not getting any records returned when we search on a word that we know are in the documents we've uploaded since December (for instance, the word 'aluminum').
Filestream is enabled for the instance.
A full-text catalog exists and contains a full-text index (the same one we've always had). Full-text indexing is ENABLED.
I've tried rebuilding the catalog and the index. I've tried to do a FULL POPULATION on the table.
We haven't changed our queries nor the way the files are uploaded.
Nothing works. I have been a database administrator since the SQL 2005 days and I have never seen anything like this.
Please help.Hi GINGER PIERCE,
Since the issue regards SQL Server Search. I will help you post the question in the related forums. It is appropriate and more experts will assist you.
According to your description, in theory , if you can do a full-text search for SQL Server 2008, when upgrading the SQL Server version from 2008 to 2012, the Full text indexing feature should be run well in SQL Server 2012 databases. If not , you can try
to restore your database from SQL Server 2008 to SQL Server 2012, create an new Full-Text Catalog and Index on the table or view in the database, and then use Full Text Index to search words, phrases and multiple forms of word or phrase via FREETEXT() and
CANTAINS() with “and” or “or” operators. check if it is normal that the full-text search feature is enabled in the SQL Server 2012 instance. For more information , see:
Full Text Search step by step in SQL Server 2012.
Note: In SQL Server 2012 SP1 , the server will report that Full Text Search is not supported in this edition of SQL Server when it clearly is. The workaround is to create the initial catalog by using a T-SQL query:
CREATE FULLTEXT CATALOG
In addition, since it is a fileStream database, we need to verify if you do Full Text Searches on documents in FileTables, if yes, you should enable FileStream database for your SQL Server, and enable FileTable options for the database. For more information,
see:
Full Text Searches on Documents in FileTables.
Regards,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support -
Full-Text Search is Enabled But It Is Not Working.
I Have Already Installed SQL SERVER 2008 ANd Full Text Search Is Also Running I Check It Via Query It Is Also Return !. Now What i M DO?????
Hello,
What's the database role of the current user? If it is not a a member of the db_owner, or db_ddladmin,
you must have CREATE FULLTEXT CATALOG permission on the database, or have REFERENCES permission on the full-text catalog and ALTER permission on the table or indexed view.
For example:
GRANT REFERENCES ON FULLTEXT CATALOG :: Catalog_name TO User ;
Reference:GRANT Full-Text Permissions
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support
Maybe you are looking for
-
Sending email using system default mail client
I'm working on a project right now, and I have no desire to develop a new mailing system. What would be very convienient for me is to have a call, opening the systems default mail client. Preferrably with some of the fields, like "to" and "Subject" b
-
My phone is in bluetooth when I try to add a phone, but I can't find instructions on how to put in the PIN number to activate sync. in the truck. It is supposed to be simple. THe people @ Verizon told me they can't help. Can you give me the instructi
-
[SOLVED] Unable to boot Archiso USB in UEFI mode
Hello Everyone ! I'm trying to create an UEFI bootable USB from the latest ISO : 2012.10.06. I first tried following this section of the wiki : https://wiki.archlinux.org/index.php/Un - B_from_ISO with an usb key formatted as an EFI System (of type "
-
How to Alert RFC connection failure via message mapping? Kindly Help!
Hi Experts, I have a JMS - XI - RFC scenario. JMS receives the Rosattenet PIP contents and sends it to RFC function module in remote SAP R/3 system. I have a requirement where I have to monitor RFC connection failure because of the remote R/3
-
What ways can there be to install tiger on a mac
i need all the ways u can to install tiger on my mac it has mac os tiger right now but i need to do a clean install and my dvd rom doesnt want to do the install r there any other ways to do the install ?????????? Eg. Via Usb??? Is there some 3th part