Full TM restore

I cracked open my laptop this morning, and dumped in a new Seagate 7200 RPM 200 GB drive. Awesome, I thought, now time to use Time Machine. I booted from the Leopard DVD, formatted the new disk, and then went to restore from a TM backup. Problem is, it calc'ed the space necessary to restore for awhile, but then doesn't see the new disk. Crap!
I formatted again, when back, selected a new backup, and same thing. I went back to the Leopard installation window and went forward to see if it could see it as an installable volume. Sure can, just not in the TM restore panel.
So, I guess I'm kind of doing an erase and install, as I'm putting on a fresh copy of Leopard. Problem is, what to do to get the data off the TM drive? Can migration assistant be used? Can TM be used in the fresh install, i.e., bypassing the boot from DVD method?
I do have an alternate backup on a network server, but it won't save the programs, only the files. I'd rather not go through the pain of installing and configuring stuff all over again.
Also, anyone else have this problem?

Great case guys. I'm researching this now before I buy a new drive. I've got a 100 GB in my PB with only 10 GB left after the Leopard upgrade and some new iMovie projects. I'm looking for a fast 200 GB+ that's got at least 16 MB cache and 7200 rpm.
My question was could I use my external HD with TM to copy over all the files from my last PB backup. Obviously it's got to be an exact copy as if I did it using Carbon Copy Cloner. If so, this will be a breeze. I won't have to worry about trying to find a 2.5 enclosure to swap data a reformat the old drive.
I didn't know about that Migrate feature during the Leopard install. It sounds like that's all I need to do. I hope you guys follow-up after your procedure to ensure it worked out all right.
Good Luck!

Similar Messages

Hey I'm a novice on computers, but i've just done a full system restore on my laptop after backing it up on an external hard-drive long story short in the back up process all my itunes converted to mpeg4 files and now i can't get them back into my my libr

Hey I'm a novice on computers but i've just done a full system restore on my laptop and put it back to factory spec, obviously i backed up all the data on an external hard-drive but when i have re-installed itunes and gone to import all my old music files from my previous itunes library as mpeg4 files it keeps telling me i don't have permission??!! *** someone please explain or tell me how to get music on to my new itunes without having to re-import every cd i own which is alot!!!

Other than iMovie, GB always incorporates the audio files into the GB package. So just save or move the GB project to the external drive, and you're done - anything you import, edit or record will be saved to the external drive.

HT4528 My iPhone 4s would not sync - it kept canceling. I backed it up and did a full system restore. Now it won't restore my apps. It starts on 1 of 51 and then tells me it's canceling sync and it stops. My apps are all black. How do I fix this?

My iPhone 4S kept canceling while syncing. In the Apple support communities, it was recommended that I do a full system restore. I backed the phone up and did the restore. Now it won't finish the restore process. It gets to where it will restore the apps and it says "copying 1 of 51", and then it cancels the sync. I have no apps on the phone - they are all black and they say "waiting". How do I get the apps reloaded on the phone? Do I have to delete them all and redownload them? I'm not even sure that will work. Do I go to Verizon and ask if they can fix it? Any suggestions?

robsta_1980 wrote:
...- no laptop, no desktop, just my iPhone! How can I get my songs back?
Download Past Purchases
http://support.apple.com/kb/HT2519

Can I do a full system restore of a 10.5 system by booting on a 10.6 CD?

Dear all,
I am trying to support my parents whos MacBook just failed (harddisk dead). They have now gotten a new harddisk installed and wants to restore the setup from their TimeCapsule.
I would prefer to do a full system restore, so that it gets back to exatly how they had it before. A 'user only' setup would require them to reinstall all third party apps including MS Office etc., which will be tricky for them.
Few questions:
1. Does a 'full system restore' restore everything, including applications and system files? Will it be going back to an exact clone of what they had?
2. They ran a Mac OS 10.5.x system, but cannot find their installation CD. Can I lend them my Mac OS X 10.6 (Snow Leopard) CD to boot, while still restoring their 10.5.x system? (I don't want them to have 10.6 as I am not sure about compability with all their 3rd party software/drivers etc.)
3. Any other things I should keep in mind for a successful restore?
Thanks,
Magnus

Magnus Olsson wrote:
2. They ran a Mac OS 10.5.x system, but cannot find their installation CD. Can I lend them my Mac OS X 10.6 (Snow Leopard) CD to boot, while still restoring their 10.5.x system?
No. Well, you can do the restore, but it won't boot.
You need a Leopard disc. It can be the original that came with their Mac, or a Retail (black) version, and it doesn't matter what version of Leopard it is, since you don't load OSX but only use the Installer utility. Thus borrowing one doesn't violate the license.
They really should have a Leopard disc, not only to do a restore, but also if they need to do a +*Repair Disk+* on the internal HD. And they would need the original disc, for the Apple Hardware Test on it; AppleCare will send them a replacement for a nominal fee.
3. Any other things I should keep in mind for a successful restore?
Yes. See #14 in the Frequently Asked Questions *User Tip,* also at the top of the +Time Machine+ forum, for detailed instructions. Note the caution there, under the green box, about turning TM off immediately after the restore.

If I need a full rman restore which backups will it use?

Hello,
I have a database 11.1.0.7 with 8TB. Block change tracking is enabled.
At the weekend I take level 0 backup and during the week level 1 cumulative.
For some weeks the level 0 backup is failing, so I only have level 1 cumulative backups taken every week day with a 4 weeks old level 0 backup.
If I need a full rman restore which backups will it use? Will it be the last level 0 backup with the last level 1 cumulative?
I ask this because grid crontrol tells me that the recent level 1 backups input size is smaller than last week level 1 backups and in between I dont have any level 0 sucessfull backups. Shouldn't the input size of level 1 cumulative increase until the next level 0 backup ?
The grid reports:
Backup Name Status Start Time Time Taken Type Output Devices Input Size Output Size Output Rate (Per Sec)
rman_df_lv1c COMPLETED 25/Jul/2011 21H00m WEST 02:33:29 DB INCR SBT_TAPE *1.32T* 289.02G 32.14M
rman_df_lv0 FAILED 23/Jul/2011 02H01m WEST DB INCR SBT_TAPE 8.78T 8.06T
rman_df_lv1c COMPLETED 21/Jul/2011 21H00m WEST 04:39:38 DB INCR SBT_TAPE *3.46T* 550.82G 33.62M
rman_df_lv1c COMPLETED 20/Jul/2011 21H00m WEST 04:47:36 DB INCR SBT_TAPE *3.37T* 524.36G 31.12M
rman_df_lv1c COMPLETED 19/Jul/2011 21H00m WEST 04:06:09 DB INCR SBT_TAPE *3.15T* 490.75G 34.03M
rman_df_lv1c COMPLETED 18/Jul/2011 21H00m WEST 03:40:24 DB INCR SBT_TAPE *2.49T* 410.88G 31.82M
rman_df_lv0 FAILED 16/Jul/2011 22H16m WEST DB INCR SBT_TAPE 6.27T 5.69T
rman_df_lv1c FAILED 14/Jul/2011 21H00m WEST 06:13:40 DB INCR SBT_TAPE 4.38T 714.30G 32.62M
rman_df_lv1c FAILED 13/Jul/2011 21H01m WEST 04:40:45 DB INCR SBT_TAPE 3.25T 542.98G 33.01M
rman_df_lv1c COMPLETED 12/Jul/2011 21H00m WEST 07:15:54 DB INCR SBT_TAPE 4.74T 847.93G 33.20M
rman_df_lv1c COMPLETED 11/Jul/2011 21H00m WEST 07:26:40 DB INCR SBT_TAPE 3.78T 766.40G 29.28M
rman_df_lv0 FAILED 9/Jul/2011 02H32m WEST 04:30:44 DB INCR SBT_TAPE 749.89G 716.02G 45.14M
rman_df_lv1c FAILED 7/Jul/2011 21H01m WEST 04:49:24 DB INCR SBT_TAPE 2.16T 515.90G 30.42M
rman_df_lv1c FAILED 6/Jul/2011 21H00m WEST 01:26:06 DB INCR SBT_TAPE 745.83G 165.48G 32.80M
rman_df_lv1c FAILED 5/Jul/2011 21H01m WEST 00:05:48 DB INCR SBT_TAPE 58.56G 7.56G 22.24M
rman_df_lv1c FAILED 4/Jul/2011 21H00m WEST 01:55:03 DB INCR SBT_TAPE 422.40G 79.55G 11.80M
rman_df_lv0 FAILED 3/Jul/2011 16H32m WEST 30:22:04 DB INCR SBT_TAPE 4.53T 4.21T 40.40M

>
If I need a full rman restore which backups will it use? Will it be the last level 0 backup with the last level 1 cumulative?
From http://download.oracle.com/docs/cd/B28359_01/backup.111/b28270/rcmvalid.htm
Validating Backups Before Restoring Them
You can run RESTORE ... VALIDATE to test whether RMAN can restore a specific file or set of files from a backup. RMAN chooses which backups to use.
The database must be mounted or open for this command. You do not have to take datafiles offline when validating the restore of datafiles, because validation of backups of the datafiles only reads the backups and does not affect the production datafiles.
When validating files on disk or tape, RMAN reads all blocks in the backup piece or image copy. RMAN also validates offsite backups. The validation is identical to a real restore operation except that RMAN does not write output files.
You can monitor what RESTORE VALIDATE does.
Make precautions, so you do not damage the production DB!!!
Iordan Iotzov
http://iiotzov.wordpress.com/

How can one do a full system restore from Time Machine to a Macbook Air

I recently had a major crash on my two internal disc DualG5. The system internal disk failed completely and I used Time Machine to do a full system restore to the second internal disc. It worked PERFECTLY!! I followed the instructions in support
http://docs.info.apple.com/article.html?path=Mac/10.5/en/15638.html
This involved inserting the Leopard DVD into the optical drive and backing up from my external LaCie time machine backup.
I also have a MacBook Air. I use an external USB HD drive as Time Machine backup. The Air only has one USB port. I have an external DVD drive for the Air. Clearly, I will not be able to mount the DVD and External disk at the same time unless I use a small hub. I guess this will work but is there any other work around. Could I do a full reinstall and then connect the external HD?

Richard,
Alternatively, you could use Remote Disc Sharing (via the DualG5) to do the install and reserve the USB port for the Time Machine disk.
[http://support.apple.com/kb/HT1131]
[http://support.apple.com/kb/HT1777]
Let us know if this was helpful.
Cheers!

Ho do i restore my files from time machine after a full system restore?

I have just had a full system restore on my MAC, thanks to the genious bar in Bondi, prior to doing this i backed everything on my external hard drive using time machine, i now want to put everything back on to my MAC, including emails, music, photos, movies and important docs etc. what is the best way to do this?
cheers Colin,

See Here > How do I restore my entire system?
From Here > http://pondini.org/TM/FAQ.html
More Info Here > http://pondini.org/TM/Troubleshooting.html

I did a full system restore to my phone along with the new 7.0 update. Now I went to restore my phone setting back through Itunes and it goes through all the steps but when it is completed it wont get past the "Connect to Itunes" screen

I did a full system restore to my phone along with the new 7.0 update. Now I went to restore my phone setting back through Itunes and it goes through all the steps but when it is completed it wont get past the "Connect to Itunes" screen

So what happens when you connect to iTunes?

Unable to boot after Time Machine full system restore!!

I was having some serious slowdowns with my computer. I did multiple RAM and HD hardware tests, everything seemed to be working fine. I had recently deleted a bunch of files in order to free up some HD space, so I thought that may be the culprit. So I did a Time Machine backup and restored the Powerbook to it's original 10.3 software. All was fine. Then I upgraded back to 10.5 and all was fine. Then I did a Time Machine full system restore overnight and got the message "Your restore was successful, you must now restart your computer" (or something to that effect). Now I get the start-up chime and startup screen (apple logo) but then the computer shuts itself down. I have reset the PMU and PRAM to no effect. I have tried booting up in safe made, also no dice. I have tried starting it up with the time machine HD attached - doesn't help. I guess I'll need to hit the genius bar but wanted to ask the friendly discussion forum folks first. thanks in advance.

Hi coldengray
Did you try to start from your System-CD? Hold down C-key during startup, start DiskUtility from the menu and verify/repair disk and permissions there.
If the CD is not available you can also connect your TimeMachine-Disk, select it as startup volume in System Preferences/StartupDisk, restart and then run DiskUtility from folder Applications/Utilities
Good luck P

Unable to boot up after full system restore

I was having some serious slowdowns with my computer. I did multiple RAM and HD hardware tests, everything seemed to be working fine. I had recently deleted a bunch of files in order to free up some HD space, so I thought that may be the culprit. So I did a Time Machine backup and restored the Powerbook to it's original 10.3 software. All was fine. Then I upgraded back to 10.5 and all was fine. Then I did a Time Machine full system restore overnight and got the message "Your restore was successful, you must now restart your computer" (or something to that effect). Now I get the start-up chime and startup screen (apple logo) but then the computer shuts itself down. I have reset the PMU and PRAM to no effect. I have tried starting it up with the time machine HD attached - doesn't help. I guess I'll need to hit the genius bar but wanted to ask the friendly discussion forum folks first. thanks in advance.

Did you sort it? Same thing happened to me and I am having to do another 8 hour restore!

Blockrecover but full datafile restore + ORA-01193

Hi,
We have a proplem, here is a short sescription:
We have corrupt blocks, how can we solve this problem? Blockrecover uses full datafile restore and finally fails with ORA-01193.
Here is a detailed description:
We have a 330GB datafile (bigfile tablespace) with 46 corrupt block.
DB version 10.2.0.4, Oracle linux, we use ASM.
We would repair these blocks.
V$DATABASE_BLOCK_CORRUPTION after "backup validate check logical datafile 7" :
FILE#     BLOCK#     BLOCKS     CORRUPTION_CHANGE#     CORRUPTION_TYPE
7     16872378     1     0     FRACTURED
7     16872408     40     0     CORRUPT
7     16872379     5     0     CORRUPT
The result is similar by dbv.
We have archivelog mode and backupset created by rman command:
backup as compressed backupset incremental level 0 database;
All of the corrupted blocks are in 1 LOB segment.
We copied the LOB segment, only 5 record cannot be read.
The corrupted LOB segment (and table) was exchanged by the copied (not corrupted) data, so users can work.
We remained the corrupted LOB segment in the database, but it is not in use.
I started blockrecovery by command:
BLOCKRECOVER DATAFILE 7 BLOCK 16872378,...,16872447;
The listed blocks are same as in the V$DATABASE_BLOCK_CORRUPTION, so the command could be:
BLOCKRECOVER CORRUPTION LIST;
The database was opened during blockrecocer and the datafile 7 was online.
A line appeared in the V$SESSION_LONGOPS with:
"RMAN: full datafile restore"
The restore was more than 4 hours, and finally it is failed with error:
Starting blockrecover at 29-AUG-12
starting media recovery
ORA-01193 file % is not the same file seen at start of recovery
Based on V$SESSTAT there were lot of physical read but only some physical write.
Maybe full datafile read, and only corrupted blocks was changed, but I didn't check it exactly.
We retried blockrecover with only one block, but the result was same: it failed after 4 hours with ORA-01193.
We retried the blockrecovery on a mounted but not opened database, and the datafile was offline:
SHUTDOWN IMMEDIATE;
STARTUP MOUNT;
ALTER DATABASE DATAFILE 7 offline
BLOCKRECOVER ...
The result was same: it failed after 4 hours with ORA-01193.
rman backup failed with error:
RMAN : ORA-19566: exceeded limit of 0 corrupt blocks for file %
After set maxcorrupt, rman backup ran successfuly
SET MAXCORRUPT FOR DATAFILE 7 TO 46;
Based on our current info, these workaround seems best for us:
- rman "set maxcorrupt"
- DB_BLOCK_CHECKING=FULL
- drop corrupted (but copied and not used segment)
- wait until corrupted blocks will be reallocated (checking it periodically by dbv)
- set maxcorrupt to 0
Our questions are:
*1. Why oracle uses "RMAN: full datafile restore" during blockrecover?*
Why needed to read the whole datafile?
One of the advantage of blockrecover should be the relative small IO, and fast restore.
I found only 2 results in google for "blockrecover" and "RMAN: full datafile restore".
(One of the findings was in this forum, but it was no answer for our problem)
*2. ORA-01193: file is not the same, but why?*
It is strange on opened database and online datafile, because other advantage of blockrecover should be the online recovery.
But it is more-more strange on closed(mounted) database and offline datafile. Only the rman blockrecover could change this file.
I found only 3 results in google for "blockrecover" "ORA-01193"
I found only the oerr output in google for "ORA-01193". But what does it mean? Only the rman blockrecover could change this file.
Cause: A different copy of the file was accessed the last time media recovery looked at the file header. A backup of the file was restored or the meaning of the file name changed during recovery.
Action: Ensure the correct file is available, then retry recovery.
*3. What else can be do to repair these corrupt blocks? What can we do for success blockrecover, or is there any other idea?*
Other infos:
- DB_BLOCK_CHECKING was false, but we changed it to FULL to avoid the subsequent corruptions
ALTER SYSTEM SET DB_BLOCK_CHECKING = FULL scope=both
- DBMS_REPAIR cannot detect the (out-of-line) LOB segment errors.
- rman SET MAXCORRUPT is not a "calming" solution
- When I read on internet, when we drop the corrupted LOB segments, the blocks will remains corrupt.
And the block will be repaired/formatted only when a new segment will allocate these blocks.
Based on metalink 336133.1, we can ensure the new allocation by fill the datafile with dummy data until the corrupted blocks will be allocated.
But this is a very IO intensive task.
- full recovery
very IO intensive, we try to avoid it.
Thx: lados.

Hi,
other infos:
We use ASM, and one of the disk is dropped and added after the last full (incremental level 0) backup. Can this premise causes the slow restore (something physical storage info is changed), or the ORA-01193 error (file % is not the same file seen at start of recovery) ? I don't think that a full db backup is needed after ASM disk drop/add/rebalance. But we tried a full backup (this was when the corrupt block first appeared with ORA-19566).
I found only one finding in the metalink for ORA-01193. The oerr reference (cause,action). It would be strange, if nobady else had problem with this error.
Thx: lados.

ORA-12560: TNS Protocol adapter error after full database restore.

Good afternoon,
Following the steps given in page 9-32 of the 2 Day DBA document, after doing a full database restore, the home page shows:
NOTE: all of the output shown in this post is obtained directly from the host not a client. AND all using ENTERPRISE MANAGER.
1. The database instance is down
2. The listener is up
3. Agent Connection to Instance has status of Failed, followed by ORA12505: TNS: listener does not currently know of SID in connect descriptor (DBD ERROR: OCIServerAttach)
When I try to connect as sysdba using SQL Plus, I get the output shown below:
0 18:14 [Oracle] [13G] [2,031M] E:\Oracle\product\11.2.0\dbhome_1\NETWORK\ADMIN>
tnsping dbca
TNS Ping Utility for 32-bit Windows: Version 11.2.0.1.0 - Production on 30-AUG-2
010 18:14:36
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
E:\Oracle\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
(HOST = orahost.john.local)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = dbca.
john.local)))
OK (50 msec)
0 18:14 [Oracle] [13G] [2,050M] E:\Oracle\product\11.2.0\dbhome_1\NETWORK\ADMIN>
sqlplus /nolog
SQL*Plus: Release 11.2.0.1.0 Production on Mon Aug 30 18:17:53 2010
Copyright (c) 1982, 2010, Oracle. All rights reserved.
SQL> connect
Enter user-name: sys as sysdba
Enter password:
ERROR:
ORA-12560: TNS:protocol adapter error
SQL>All I did was perform a full database restore in the same database, the simplest case. Any ideas as to why I can no longer connect ?
Thank you very much for your help,
John.
Edited by: 440bx - 11gR2 on Aug 30, 2010 6:58 PM - added Using Enterprise Manager.

I don't know what else I could have done given the behavior of the service.You can avoid problems like this in the future by avoiding Windows & using any approved *NIX Operating System.
No such "service" or daemon exist on any *NIX OS.

Computer Full System Restore,Need to sync old songs into XP from IPOD Touch

My Computer had nasty virus, Removed by full system restore to out of the box settings. Itunes 9 downloaded but empty. I have a 8GB Ipod touch with 450 songs i dont want to loose. If i sync will i loose all my old library? Or should i purchase something like media/widgit to fix this?

Hi,
This can be done with some third party software.
Search posts by "Zevoneer" eg. here - [Click Here|http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0]
Good luck,
Dud.

Full database restore and recovery

Hi all,
All my datafiles are corrupted.
I have a incremental level 0 backup
can i restore and recover the db with this backup?
regards,
prem

we went for a point in time recovery
while restoring we received the following error.
Full Database restoration failed with error
ORACLE error from target database:
ORA-00600: internal error code, arguments: [2103], [0], [0], [1], [900], [], [], []
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 5157
ORA-06512: at line 1
released channel: GMUP1
released channel: GMUP2
released channel: GMUP3
Please help us in this regard

Network Error in Client Full System Restore

Hi,
I've been attempting, as a test, to restore a full system backup to a client computer using a boot flash drive. When I attempt to do so, I get a "Unknown Network Error" at the point where the client has attempted to contact the server, been unable
to and offered the opportunity to enter a name or an IP address. When I enter either one, I immediately get an "Unknown Network Error". There's no error number or other specific identifying informations.
Details:
The client computer is a UEFI motherboard PC running Windows 7 Professional. It connects with no difficulty whatsoever on a normal basis to the Windows 2012 R2 Essentials server. It gets backed up every night by the server over the network with no problem.
When I boot from the Network Client Computer Restore USB key, everything works fine except that it is unable to find network drivers. When given the chance to load missing drivers, I use the "Drivers for Full System Restore (from the full system backup)"
on another USB key and they are found just fine.
Then when we get to the point of searching for the server, it appears to look for 30 seconds or so, then a dialog comes up asking whether to search again or if I want to enter a IP or name. Searching again doesn't yield results, and when either an IP or
the server name is entered, I get the "Unknown Network Error".
I feel certain there must be some logging that is either available or could be turned on if I knew how. I feel concerned that I would not be able to restore my client computer if something were to happen. Any ideas would be greatly appreciated.
Jeff

Hi Justin,
Thanks for your response. I'm sorry that I didn't see it sooner - I guess I assumed I'd get an email if there was a response...
Anyway, at the time when the error occurs, the OS is not running. We have just booted via PXE over the network and started the "Full System Restore" Wizard, so it is not possible to "ping" the server. However, the fact that we successfully
booted via PXEs tells me that basic connectivity exists to the server, because otherwise the PXE boot wouldn't work.
Thanks for the pointer to the logs - I'll check them.
What I have done since I last updated was to do a few experiments. I added a Windows 7 boot image and install image with the Windows Distribution Service, so that on PXE boot I'm given 2 options - a Full System Restore and a Software Install.
I also roped another PC into service, one that is running from BIOS rather than UEFI. On that PC, both the System Restore and Software Install via PXE boot work fine. This tells me the server is at least nominally working, and that the problem is related
somehow to the specifics of the PC being connected. Could be server setup still, could be something on the PC.
On the computer with the UEFI, neither Full System Restore nor Software Install works. However, there is at least a clue in the error response from the Windows Setup - I get a lengthy error message that essentially says that \Windows\Boot\EFI\bootmgr.EFI
is corrupted. I'm not clear whether at this point we are referring to a file extant on the PC or one that is being downloaded that's being claimed to be corrupted.
This took me down a path in which, to eliminate variables, I changed the boot drive on the UEFI system from MBR to GPT. No joy. Also broke up my mirrored drive and changed the SATA from RAID back to AHCI. Also no joy. But everything I am reading is leading
me to believe that the problem has to do with the fact that my target PC has a UEFI BIOS. I continue to investigate - and will look through the logs you mention.
Jeff
Update 8/24/2014
Made some progress yesterday. I'm now able to use Windows Deployment Service to deploy Windows 7 over the network to the UEFI computer. I had to do two things to get that to work.
Turn off driver signing in the UEFI bios. That got me past the error screen complaining about a corrupted driver (which I'm pretty sure I don't have). But then it got hung up saying it couldn't find a driver for the network.
To fix that, I added the driver package to the boot image using the tools in the Windows Deployment Service applet.
After that, it found the server just fine, allowed me to authenticate, and would have proceeded to install Windows 7 if I hadn't aborted.
I then added the exact same driver package to the Full System Restore boot image, but it made absolutely no difference. Exactly the same symptoms as reported previously.
So, where am I and what do I know?
I can do both a Remote Windows 7 install and Client Full System Restore using Windows Deployment Services on an X64, BIOS based computer.
I can do a Remote Windows 7 install to my X64 UEFI based computer.
When I attempt a Client Full Restore to the X64 UEFI computer, I get all the way to the Full System Restore Wizard, which tells me that it can't find network drivers (even when they've been installed to the boot image). It finds network drivers when provided
via a USB key, but then when the Wizard looks for the server, it's unable to find it. When a manual option is presented, and I enter the server's IP address, I get an "Unknown Network Error" popup message, and I can't proceed further.
On the UEFI computer, I've tried all combinations of Compatibility Support Module (CSM) settings, but they make absolutely no difference to the Full System Restore process.
I've also tried converting the boot disk from MBR to GPT, didn't make any difference.
I "unmirrored" my mirrored RAID drives and changed the SATA bios from RAID to AHCI. Made no difference.
So, at this point I'm kind of stuck. I'm out of ideas for things to try for now. I did look at the logs as suggested, but didn't see much of anything relative to WDS. Possibly logging has to get turned on?
As always, any help or ideas would be much appreciated.
Jeff

Contacts deleting by themselves and iPhone needs a full backup restore after refusing to sync with iTunes. - Pls Help!

I have had my new iPhone 5s since the middle of December 2013 and I really enjoy it, however, I'm finding the iOS a little unstable.
I backup often - whether to iCloud or to my iMac at my office or to my Acer Windows 7 based Notebook at home, and I have had to do a full backup restore of my phone software after it suddenly refused to sync with iTunes. The only option open to me was "Restore iPhone" which also is a nuisance and takes a little while if you have a lot of content on your phone. I've had to do this 3 times now and it's getting on my nerves!
Also, as I type this, my contacts are suddenly removing themselves from my phone book. I discovered this as I was going through my Whatsapp messages when I noticed a few numbers in my recent chats that didn't have names or contact pictures. When I scrolled to the top of the message, I noticed that the "add contact" detail was suddenly available. I immediately checked my phone book and noticed that those contacts are no longer available. A lot of my numbers are suddenly showing up like this within the last hour and I haven't changed any settings at all. I back up to my notebook and iCloud once a week. This problem is a first for me as well.
I must point out that I never had these issues with my iPhone 3GS which was only becoming cumbersome due to its outdated OS and because of its processing speed.
Will I need to wait for the next IOS Update to solve this problem, or will I have to find an alternative solution?
Any advice you have to offer would be most welcome.

Simplify your question,will you? I have trouble in reading such a long English article.

Full TM restore

Similar Messages

Maybe you are looking for