Full uninstall labview 2009

i have installed labview2009 evaluation version in my laptop. Now I want to uninstall it. but how to uninstall its registry entry? what are the keys introduced NI?

What kind of registry entries are you worried about. Just uninstalling the application should be enough for all practical purpose.
(Are you possibly trying to be able to get another evaluation period out of this exercise? )
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

Error 1612 when uninstalling LabVIEW 2009

Hello,
I'm trying to uninstall LabVIEW 2009 from an Acer tablet running Windows 7. Whenever I attempt to uninstall it though, I receive error 1612. Also, I'm not doing any weird methods of uninstalling; I'm following what the NI website says to do! When looking at previous topics that discussed this issue, none really seemed to come to a clear solution and I'm not sure yet if using a 3rd party program is the way to go. Have any new solutions to this problem appeared? I need to uninstall LabVIEW 2009 so I can install the 2014 version on it. That way I can move a program that I wrote on my personal laptop to my lab's tablet.
Any help is much appreciated!
Amy

You don't need to uninstall 2009 to install 2014. That said, it sounds like something is corrupt. As counter-intuitive as it may sound, you might try installing 2009 from the command prompt using the command: setup.exe /reinstall
That will force the installer to overwrite registry entries and the such. After that's complete, you should be able to uninstall.

Crash deploying library after uninstalling LabVIEW 2009

I have been running LabVIEW 8.6 with the DSC module. Recently I briefly installed LabVIEW 2009 for evaluation, then uninstalled it. Now version 8.6 crashes every time I deploy a library. I have tried repairing, uninstalling and re-installing 8.6 with no success. The crash message says the problem is in msvcr71.dll. There are many copies of various versions of msvcr*.dll all over my computer and I am not sure where the problem lies. Can anyone help?

Hi Richard,
Can you please upload a screenshot of the exact error message? I would advise emailing or calling in at National Instruments through this link.
Ipshita C.
National Instruments
Applications Engineer

Run-time engine problem in Labview 2009 and Labview 2010

I have a problem with Labview 2009 and Labview 2010. I updated my Labview 2009 into 2010. But it turned out to be a trial one, because i did not have the serial number. So I uninstalled the Labview 2010. however, the funny stuff came over. I cannot use my Labview 2009. So i uninstalled Labview 2009 again. But eventually, I could not reinstall Labview 2009. Every time i had a runtime error and i could not proceed with the installation. in addition, any installation related to Labview is not permitted and the same error came up every time. it is very annoying.
So, What is the deal?
I attached the error here. Any comments or advice are welcomed and appreciated.
Attachments:
error.docx ‏2305 KB

By chance is this machine's language set to any non-English locale? You would check the locale setting by:
Opening Control Panel.
Opening "Regional and Language Options".
Looking Under "Regional Options" >> "Standards and Formats"
If it is set to something besides English, trying setting it to English and please report back what locale it was set to (or if this even solves the problem).
Regards,
- WesW

LabVIEW 2009 SP1 Run-Time Engine (Minimum) (32-bit) for Windows - Supported Features

Hi,
Can some one please point out what features are supported by the LV RTE (Minimum ) [LabVIEW 2009 SP1 Run-Time Engine (Minimum) (32-bit) for Windows]
1) Is there a limit on the size of the exe which can be run on it?
2) Will this support additional modules like DAQ etc.,? Or do we have to chose the regular installer ( 170 Mb ) for that purpose?
3) If a list of what it does or does not support is available, it would be extremely helpful.
Thanks In advance.
Regards,
Vijay

Anand,
I did go through both the links that you had sent earlier before posting on the forum. For eaxample refer the following link where it says,
http://joule.ni.com/nidu/cds/view/p/lang/en/id/1599
It does not contain the full run-time engine, but will allow some executables to run.
1) What do they mean by 'some' executables. Is there a list of yay's and no's available?
2) Can someone from NI reply to this and shed more knowledge?
Regards,
Vijay

Labview 2009 .exe not working with windows 2000

I created a simple vi with Labview 2009 to reset a counter in registry key. I changed it to an exe. The program runs fine on any machine with XP but it does not work on the machine I need it on which is running Windows 2000 SP4. I installed the 2009 runtime but I continue to get an error when it starts up saying the vi is not executable and that I need the full development to fix the errors. But like I said it works every where else. I've tried other exe wrote in LV2009 on this machine and they work. Is there something in my vi that is not compatible with Windows 2000?
Thanks
Solved!
Go to Solution.
Attachments:
Serial Number Reset Cell 2.vi ‏15 KB

There was an issue with building DLLs on Windows 2000 - http://digital.ni.com/public.nsf/allkb/431C9BD8F3482033862576A90073441F. Since you say you are trying an EXE, this may not be applicable.
George M
National Instruments

Labview 2009 I/O assistant issue

Hi,
I'm using labview 2009, and I can't get the I/O assistant to work-everytime I try to run it, it gives me the error message "Measurement & Automation Explorer or the Instrument I/O Assistant is not installed correctly. Please install these from LabVIEW Driver CD". I've tried uninstalling and re-installing the I/O assistant, but it's not helping-is there anything else that can cause this error I should be looking for?
Thanks

Hi ciwong,
This problem usually originates from installation order. You want to install the drivers after you install after you install LabVIEW.
Another things that jumps out is that you are listing NI VISA 488.2 as version 2.1. The current version of NI VISA is version 5 and the current version of NI 488.2 is version 2.73.
Please let us know if you have any questions
Joe Daily
National Instruments
Applications Engineer
may the G be with you ....

Uninstall LabVIEW but leave run-time engine and DAQmx

Hoping there is an easier way to do this, basicall we are developing software on a customers computer that we buy and will eventually ship to them. However we can't ship them LabVIEW so we make an executable and just keep the run time, DAQmx and MAX. Is there anyway to do this easier than uninstalling LabVIEW and reinstalling everything else?
Windows 7
LV2013

Under Windows, try going to Control Panel | Programs and Features and find National Instruments Software. You might be able to select all except the run-time, DAQmx and MAX, then select uninstall. If not, then perhaps consider just making a full installer for your LabVIEW executable solution, this will clearly install only the necessary components for your code to work (if it's LabVIEW 2013).
Thoric (CLA, CLED, CTD and LabVIEW Champion)

Remove labview 2009 without using add/remove program

Hi all,
I have problem with removing LabVIEW 2009.
I have deleted some folders in C drive, NI folder.
Now I can't run my LabVIEW 2009 and it doesn't show up in my add/remove program list.
I tried to delete all folder and files in C drive under NI folder, but error message pop out shows that I do not have the authority to do so.
So, how can I remove it completely ?
I intended to reinstall LabVIEW 2009 after I have removed it completely.
Appreciate your help very much.
Solved!
Go to Solution.

That is why I say try to reinstall LabVIEW. It might just do a repair of your installation. Then you can use add/remove programs to completely uninstall it.
But when you completely uninstall it there will be NI folders remaining. These are things like user.lib.
Have you tried to reinstall the runtime engine?
One last thing. I don't know how you got your install so messed up but remember that if you build an installer you should not install that onto a system with the development environment. There are so many things that can go wrong.
=====================
LabVIEW 2012

LabVIEW 2009 and its sp1

I have the LabVIEW 2009 and LABVIEW 2009 SP1. Do I have to install 2009 first and then 2009 SP1? Or the 2009 SP1 also includes the full 2009. The reason I am asking is that I installed my 2009 on a computer, which took forever by the way. After the 2009 installation is completed, I installed the 2009 SP1, and it took pretty much the same amount of them, so I am wondering did I have to install both?
Yik
Kudos and Accepted as Solution are welcome!

Thanks!
Kudos and Accepted as Solution are welcome!

Mobile Module for Labview 2009

Hello,
What do I need to install to use Mobile Module with Labview 2009?
I have installed Labview 2009 but I don't see the PDA icon on the main page.

I have seen this link, but it doesn't say what I need to check when installing Labview 2009 SP1 in order to get the Mobile Module.
I work at The University of Twente and we have a full license, so I'm sure it has to be at the install checkbox somewhere...

DLL causes error when quiting LabVIEW 2009 on WIN7

Hello,
I have reduced the problem in my EXE application to the following attached code (see attachment). Somehow the DLL (To User32.dll) calls are creating a problem when quiting Labview 2009. The Application stays resident in the Windows taskbar and after a while an error appears about that there was a problem closing the application and that it can be reported to Microsoft if desired. Then a second error message appears before the application dissapears from the taskbar. If I remove the DLL:calls from the code then the problems dissapear.
Should I unload the DLL calls on a special manner before quiting LabVIEW?
Solved!
Go to Solution.
Attachments:
DLL-WIN7 problem.jpg ‏35 KB

Another potential problem not mentioned in that article is that you have included your user32.dll explicitedly in your built application. Doing that creates 200% for sure trouble as the kernel32.dll, user32.dll and others are always residently loaded into memory anyhow and mapped into the system memory section of any process. If you tell an application to load this DLL again by explicit name, you end up having two copies of it mapped in your process memory space and that will cause very weird problems.
To avoid this problem make sure the library name inside the Call Library Node only specifies the DLL name without any path information. Then close the dialog and save it. If you reopen the dialog it will show the full path but still save the name only until you make a modification in the path control at which time you can end up having a full path again.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

MathScript & Labview 2009

Hi,
i#ve worked in the past with Labview, where i had a Full Development
Solution together with Mathscript.
With LV2009 it seems, that MathScript is only available in the
Professional Development System (OK, here is MathScript with Realtime
Features available).
Have i done something wrong @ installation or is it a fact, that i
have to upgrade to Professional Version now ?
Thanks for any help
Andreas

Hi Andreas,
I wanted to clarify a few points that are related to your post.
With LabVIEW 2009, MathScript RT is a separate module, which means that it will need to be activated separately during installation, just as you would any other LabVIEW add-on modules. The LabVIEW 2009 MathScript RT Module is included with both LabVIEW Student Edition and the Academic Site License. For these options, the MathScript RT Module will install and can be activated alongside other LabVIEW components using the same serial number.
LabVIEW MathScript RT 2009 can be installed into the Full, Professional, and Student Editions of LabVIEW 2009. Deployment of a VI that includes a MathScript RT script node to a Realtime Target requires installation of the LabVIEW 2009 RT Module as well.
--Sam
Sam Shearman

Ejecutable Labview 2009

Hola no poseo el Aplication Builder de labVIEW 2009, hace poco ya me crearon un ejecutable pero tube unos problemas y tube que realizar unas modificaciones. Alguien sería tan amable de crearme un ejecutable del programa que adjunto?
Muchas gracias.
Attachments:
Nueva logica proyecto 5 REV.vi ‏36 KB

Hola,
Primero, para poder realizar ejecutable y instaladores tienes que tener LabVIEW PDS (Professional Development System) o FDS (Full Development System) ; si tienes LabVIEW Base no podrás.
Luego, lo que tienes que hacer :
- en el LabVIEW proyecto, abajo hay "Build Specification", allí tienes que añadir un EXE y abrelo para definir sus propriedades.
- cuando este ejecutable funciona en tu ordenador tendrás que realizar un instalador si quieres que funcione en otro ordenador que no tiene LabVIEW.
Suerte
When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"

Uninstall labview trial 8.6

Hi,
I have installed the Labview 8.6 trial version. My trial license expired. The issue is that I need to uninstall the labview trial version (in windows XP). When I use control panel, it fails. When I use the labview installer/modifer that the program used to install itself, it fails. How do I remove this program from my computer completley (files, registry settings, etc.)?
Thank you for your assistance.
Solved!
Go to Solution.

Hi AI996,
Thanks for your post and I hope your well today.
If the add/remove programs didn't successfully uninstall LabVIEW. Then you could try using the MsiBlast.exe.
Link:
http://forums.ni.com/ni/board/message?board.id=250&message.id=12643&requireLogin=False
Just make sure you don't have it open or any code running (check Task Manager to make sure no LabVIEW tasks are running).
Hope this helps,
Adnan - keep up the good work
Kind Regards
James Hillman
Applications Engineer 2008 to 2009 National Instruments UK & Ireland
Loughborough University UK - 2006 to 2011
Remember Kudos those who help!

Full uninstall labview 2009

Similar Messages

Maybe you are looking for