Full upload misses records while delta brings them

Hi experts,
I'm using 2LIS_12_VCHDR extractor and with delta exctractions everything is worknig correct. The problem comes when I want to make a full upload. It is not taking the last records (while delta took them). It is not bringing records into BW since the exact day I reloaded the 12 LIS tables.
If I create a sales order, and this order is delivered, my delta infopackage brings it into BW, but my full infopackage is not bringing it.
Any clues?
Points will be given,
Thanks

My scenario is the next one for 2LIS_12_VCHDR:
- Full upload on Nov 13th (6 months ago) and it takes 170103 records.
- I make another full upload today and I obtain 107103 records (the same as 6 months ago, and there are a lot more).
- I make an init request > I create a delivery in ECC> I make a delta upload an it takes it.
- Then I make a full upload and it is not taking it. I still have 170103 records.
Do I have to reiniciate the 2LIS_12 in ECC (OLI8BW)?
In the other hand I have the 2LIS_12_VAITM working with delta every day. How it will affect to this extractor if I reiniciate all the 2LIS_12? I'm going to miss data? I'm going to duplicate data?
Thanks

Similar Messages

Missing records while fetching data from Data mart

Hi,
I have some missing records in the ODS.The data is fetched from the other BW system.
It is a delta load & all the loads are succesfull as of now.But still some records are missing.
If i see in reconstruction tab, some requests are showing the Transfer structure status as clock(transfer stucture has changed sine the last request). Is it because of this time stamp status got changed ?
I have done reinitialization & the missing Datas are fetched .But i would like to know the cause of missing records.
Regrads,
ANita

Hi kedar,
If there was a time stamp difference ,the data load should have got failed.All the delta loads were succesfull.
But now they realised there are some missing records.Just for analysis purpose , i was looking into reconstruction tab & the transfer structure status was displayed as clock.
But actually there was no change in the transfer stucture.
Sometimes we used to get timestamp error &
we used to replicate the data source & activate the transfer structure.
To avoid these things in future what needs to be done.As this load gets triggered through process chain & each time the data load status was succesful.
Every time we cant do replication of datasource while loading through Process chain unless the transfer structure gets changed.
But my concern was is this the cause for missing records or something else.
Regards,
ANita

Full upload after INIT and Delta

Hi Experts,
a quick question - If there is INIT and Delta infopackage running and I do another infopackage with full update option, will there be any issue in Delta?
when do I need to run repair? only when there is possibility of duplicate loading?
Thanks - SM

Thanks Srini/Vikram for your respone.
when there is deltas already running for the datasource , you can't request for Full but you can request using 'Repair full' which will acts and extract data as full load and it won't disturb present delta's
>>. Thanks Srini. thats bottom line... after delta, you need to run repair full not full. and repair full will also pull data from setup table (history). I was thinking repair full is for taking care of duplicate, but dups we need to remove manually.
where is repair full option in IP?
where I can see all INIT conditions for a infopackage? for example INIT was done 3-4 times.. year 2001-2002, 2002-2003 etc, so all these INIT crit should be stored somewhere?
Edited by: toti shu on Aug 31, 2010 5:08 PM
Edited by: toti shu on Aug 31, 2010 5:11 PM

HT5899 Keywords missing in iMovie X. BRING THEM BACK!

This is either a terrible bug or a BAD decision by Apple. All you can do is view tags applied to videos in the previous version.
http://support.apple.com/kb/HT5899?viewlocale=en_US&locale=en_US
Please hit Apple's feedback page and let them know we need this feature BACK.
http://www.apple.com/feedback/

Did you try the F10 key?
Maybe this helps:
* http://kb.mozillazine.org/Corrupt_localstore.rdf
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

Missing records while downloading internal table to excel because of ' " '

Friends...
I am trying to download the contents of an internal table to an excel file.
Now i tried to download the contents in debugging mode. I noticed there is this character " in one of the fields of my internal table, and i came to know, that presence of such special characters results in the internal table not getting exaclty downloaded to excel format.
Is there any way to solve this problem. I thought of removing the field itself from the internal table but, thats not possible. Its mandatory to have that field in the table.
Regards.

Well.. by doing so.. the number of records etc is comin correctly, but the field in which the special character " is present, will be shown without " right.... so.. infact... the output is incorrect ....
I am sorry, i cant share the file because of security reasons..

Generic Delta: Init, Full Upload and Deltas...

Dear All,
Last week on 10.04.2014 I've created "Generic DataSource with Generic Delta" and used CalDay as Delta-Specific Field and lower limit kept to blank and upper limit to 1. On 11.04.2014 I've initialized the Delta with Data Transfer using Process Chain: Time 1:15 p.m (Note: Posting was on)
see below screen shot:
Result: Process Chain was scheduled to immediate and it executed and initialized the delta and brought records as well. See below screen shot of RSA7:
Q: 1: Why generic delta current status is 10.04.2014, as I'v scheduled delta through process chain on 11.04.2014 @ 20:50: and why Total column is showing 0 records? Even I've checked Display Data Entries with Delta Repetition, but could not find any records?
Following is the InfoPackages which I created for Delta Loads and used in another Process Chain for Delta scheduled (daily @ 20: 50).
Following is the DTP used into Delta Process Chain:
On 12/04/2014 when I checked my InfoCube, and found that same number of records being loaded again despite InfoPackage and DTP were created as Delta, see screen shot:
On 12/04/2014 See below PSA table:
On 14/04/2014 when I checked InfoCube and I saw deltas being loaded successfully: see below screen shot:
On 14/04/2014 see below PSA table:
On 14/04/2014 see below RSA7 BW Delta Queue Maintenance screen shot:
Q: 2: Why am I unable to load the Delta records on the day(11/04/2014) when I initialized it with Data and why same number of records being loaded again on 11/04/2014?
Q: 3: On 11/04/2014, around 1:15 p.m I've initialized Delta with Data successfully and the same day (11/04/2014) was my first load of delta records (Time: 20: 50), could this be a problem? as the posting period was on when I initialized and I tried to load the delta on the same day?
Q: 4: Why the pointer is showing me Current Status: 12/04/2014 today and this time around I can find last delta records from "Display Data" option with Delta Repetition?
Q: 5: Have I missed something in the design or data flow?
Q: 6: How can I verify deltas records accuracy on daily basis; is it from RSA3?
or How can I verify daily deltas with ECC delta records?
Q: 7: What is the best practice when you load full data and initialized delta and schedule deltas for Generic DataSources with CalDay as delta specific field?
I will appreciate your replies.
Many Thanks!!!
Tariq Ashraf

I clearly got ur point.....But
If i have situation like ....." I loaded the LO data from R/3 with Init delta......then i loaded 5 loads of delta too.......due to some error in data now i am trying to load all th data......In this case if i do Full upload it is going to bring all the data till 5 th delta load .......If i do Init delta again it is going to bring the same data as full upload..........In LO while loading both Full load or delta init load we need to lock R/3 users....I believe we can load delta even after full upload by using "Init delta without data transfer"............So that wont be the barrier....then what is the difference or how should i figure out which load should i do.............If i am wrong please correct me.......
Thanks

I am running full upload daily now i want to load delta records how can i

Hi Gurus,
I am running full upload daily now i want to load delta records how can i do that could any body help recording this..
Regards
Kiran Kumar

Hello Kiran,
First make sure that you datasource is delta enabled. If so create a new infopackage for Init without data transfer and execute it. Then create a InfoPackage for Delta.
Thanks
Chandran

I have updated my website, and uploaded via FTP, but some images are missing. I have deleted them in i

I have published a website with iWeb on MobileMe quite successfully. I purchased a second domain name, and republished the same site on GoDaddy before trying to point my MobileMe website name to the GoDaddy server. I was unable to upload several pictures to the second site, and posted my dilemma here. It was suggested that I try using Cyberduck to publish via FTP, which I did. I was still missing the same images. The error message says that there was a communications error with the FTP server and to try again later. I have been able to upload several more new images to the second domain name just by using iWeb's publish feature.
I want to point my MobileMe website name, www.melissaveres.com to GoDaddy, which is now hosting www.mveres-engraver.com but it will only show the site as it is currently published, with several missing pictures. I have tried to delete the photos in iWeb, bring them back in, and republish but with the same results. I have contacted GoDaddy support, who can only tell me there is no file information for those open (missing) pictures, they have heard of this happening before, but had no information on how or if it was resolved. Anyone know how to get these pictures up before I move from MobileMe?
Melissa

Bring up the Activity window (Command+Option+A) for you site and check to see what files are missing and where they belong. The URL for the missing files will tell you what folder they should be in.
Then publish you website to a folder on your hard drive and open it locally with your browser. Check to verify all images and present and the site works as you want. Then you can upload the missing files or folder containing the missing files or the eintire site folder to your GoDaddy account with Cyberduck.
OT

Delta upload full upload

Hi Gurus,
In ODS already delta is loading every half an hour. But, I don't see any data for one field in ODS. In that case, I want to load the data again to see if i can get the data? how can i do a full upload while delta is enabled? do i need to stop this delta and enable the full upload? or just full upload?
any help appreciated.
thanks

hi S.K.B,
i guess you enhanced business content datasource,
yes you need to populate the new added field in r/3
via user exit zxrsau01 (transaction data), take a look
sample code
Enhancement
User exit
and
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/59069d90-0201-0010-fd81-d5e11994d8b5
also weblogs on enhancement
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
/people/ajay.das/blog/2005/03/28/custom-fields-in-standard-extractors--making-a-mixed-marriage-work--part-12
(http://www.ko-india.com/content/weblogs/weblog_custom_fields_1.pdf)
hope this helps.

Delta Upload - InfoCube Then Full Upload ODS

Hello,
1. I upload a InfoCube in Delta Mode.
2. I upload form this InfoCube to a ODS in Full Mode.
Exemple :
1. InfoCube (Upload in Delta Mode) :
Request Order Operation WorkCenter Values
1       10    1         AAA         +10
2       10    1         AAA         -10
2       10    1         BBB         +20
2. ODS (Upload from the cube above in Full Mode)
Order(key) Operation(key) WorkCenter Values
10         1              AAA        -10
The last record upload in my ODS is the second of the Infocube. The data in my ODS are incorrects. I don't know if I need to use 0RECORDMODE.
Thanks in advance for your help.
Stéphane

Hello Stephane,
In your scenario, please do either one from following in order to update date correctly in ODS from infocube,
1. Change the update type to an addition from an overwrite at ODS level.
2. or use serialized V3 update at the r/3 side, so that R/3 system sends changed records in the same sequence as it was generated. Because you might be getting +20 first then -10 and ODS setting is kept overwrite. As a result, the ODS data are incorrect(-10).
Hope it helps you.
Thanks and Regards,
~Ketan Patel.

Deltas and full upload

Hi all,
Let's say we have a scenario like this.
For document number 1001 and document item number 10,
the order quantity was 200 initially. This was transferred to infocube. Now, the order quantity changed to 180. I assume that in a delta upload, -20 will be transferred to the cube. But, for full-upload what value gets transferred to BW. Is it 180? If so, how does these values get tallied? I mean, 200+180=380. What really happens here?

hi Pooja,
initialize in infocube
doc no doc item order quantity
1001   10       200
change to 180 in delta upload, records in infocube will be
doc no doc item order quantity
1001   10       200
1001   10       -200
1001   10       180   (value in report = 180)
full upload
1001   10       200
1001   10       180 (value in report = 380)
hope this helps.

ODS optioin- Is it going to be full upload or init delta?

Hi frnds,
I got a query where the scenerio goes like this,
Data loading from ods to infocube. Let us suppose in ods settings, i have selected the option Update data targets from ODS object automatically. Then my question is whether it will be a init delta or full upload.....please explain the scenerio.
thanks in advance
regards,
dubbu.

Hi Vinit,
This will be dependent to the load in ODS,
if the load is init in ods the further upload will be init.
If the load to ods is delta the further upload will be delta
Reward if useful
Manish

- Differences between delta and full uploads of transactional data

Hi All,
This is with refrence to the loading transactional data into the cube.
I know that delta and full uploads of transactional data into the cube is done for the following reasons.
1. Delta upload allows change in transactional data (add/delete/modify) for the particular period selected but this is not the same in full upload.
2. Full upload takes less time compared to delta upload for the particular period.
Please let me know whether my understanding is correct. Otherwise, please explain these two concepts with examples taking loading transactional data into the cube.
Regards,
Ningaraju

hi,
full upload is done to avoid more time to load the data .if u use initilallization then it will take more time to laod the same amount of data when compared to full load.
however your statement about the delta is correct.
u can perform delta only after sucessful initiallization.
so
1.first full load(to avoid more time0
2. inirtilallization with zero recored.
3. delta
regards

Issue with clearing previous record while uploading through LSMW

Hi friends,
I have created lsmw for hiring action using transaction PA40. i have a tab delimited flat file, when i run the lsmw script the first record is uploaded perfectly. However the upload halts for the second record, coz the previous record still remanins, is there an issue with the recording or do i need to clear anything?. How do i resolve this one and continue uploading other records.
Regards,
Quavi

Hi Friend,
In the LSMW, Under the User menu you have Display Read Program and Display Conversion Program select this and open the respective program you feel having problem and put a break point in the Loop statement and debug. I will help you to identify the problem to resolve.
Rgds,
Jey

Error while uploading conditions records in MEK1

Hi All,
I have a code that updates condition records in MEK1 from an excel sheet. The no of records in an excel sheet can go up to 60 k records. If i try to upload 5000 records, the coditions records are saved successfully. But then, if I try to upload 10000 records i get a error saying " Condition blocked by user " . On debugging I found out that the user id is mine. That is, same id as the person who is trying to upload records. The transaction is not open in any window as well.
My question is, why do we encounter this error and is there any limit to number of records that can be uploaded at a time in MEK1?
Thanks in advance,
Sapna

Hi Rao,
For blocking you can commit in intevals or you can use wait command but it will take extra time but your records will update in one go,when a condition record is created,then after you try to update for same material or plant thats the reason its blocking,you can either use wait or adjust your excel files and avoid duplication of materials or whatever you are using in sequential manner.

Full upload misses records while delta brings them

Similar Messages

Maybe you are looking for